Connectors

PC Series
For use with module power supplies and small electronic instruments (DC side).

HXSD-KFW-EX Series Anti-Breakage Plastic Cable Glands
Material: Made of nylon, with section A made of nitrile rubber. Thread sizes: Metric (M) and German (PG). Operating temperature: -40°C to +100°C, with short-term exposure up to +120°C. Colors: black and grey (custom colors available). Ingress protection rating: IP68. Features: The special clamping claw and seal design makes installation with the compression fitting easy. It accommodates a wide range of cable diameters and offers exceptional tensile strength. It is waterproof, dustproof and salt-resistant, and withstands acids, alkalis, alcohol, oils, grease and common solvents.

XYFT Series Plug-In Connectors
The XYFT Series Plug-In Connectors are available in a range of sizes (40, 50, 64, 65, and 75 mm), with a choice of left-side tapered-hole or round-hole configurations. Made from SUS304 stainless steel or SPCC carbon steel, they are suitable for electrical connections in automation equipment where quick connection and disconnection are required. The products come in various dimensions (including A, B, A1, B1, d1, d2, and T) and load capacities (11–22 kg). Their low weight (0.02–0.06 kg/pc) meets a range of installation needs.

FPQ Series with Connector
The FPQ Series with Connector is a compact, pin-type PCB-mount connector designed for the DC side of modular power supplies and small electronic instruments. It has a rated voltage of 250 VDC, a rated current range of 2–10 A, a one-minute dielectric withstand voltage of 500 VDC (line-to-ground), and a climatic category of 25/085/21. The series includes models DL-2FPC, DL-3FPC, DL-6FPC, and DL-10FPC, with rated currents of 2 A, 3 A, 6 A, and 10 A, respectively. Different specifications are available for ground capacitance (2.2 nF, 33 nF, and 22 nF), leakage current (1 mA and 2 mA), and discharge resistance (1 MΩ and 2 MΩ) to suit different power levels and applications. Its compact design makes it suitable for space-constrained automation equipment, and the pin-type PCB mounting facilitates high-volume assembly.

HXSD-K-EX Plastic Waterproof Cable Gland
The HXSD-K-EX series plastic waterproof cable glands feature a nylon body and nitrile rubber seals, offering excellent resistance to water, dust, salt, acids, alkalis, grease, and common solvents. Thread sizes are available in both German PG and metric M standards. The operating temperature range is -40°C to +100°C (up to +120°C for short periods), and the ingress protection rating is IP68. The products are RoHS- and CE-certified and are available in black, gray, and white; custom colors are available on request. The special clamping-jaw design works with the compression nut for quick, convenient installation and strong pull-out resistance. These cable glands are widely used to protect industrial cable entries.
M12/M8 Series Connectors
The M12/M8 series includes 3-pin M12, 3-pin M8 and 4-pin M8 receptacles and plugs for power, signal and differential signal transmission in industrial equipment. The M12 connectors use 15AWG power wires (1# red 24V+, 2# blue 0V), with 3# left vacant. The 3-pin M8 connectors carry signals such as 45S+/45S-/PE, while the 4-pin M8 connectors carry TX/RX differential signal pairs. The catalog lists corresponding receptacle and plug models and pin color assignments to simplify wire harness assembly and field wiring. These connectors are suitable for sensor, actuator, encoder and automation equipment interfaces.
M8 Series Connectors
M8 series connectors are 4-pin circular connectors for industrial equipment. This page provides their pin assignments and the product-side and client-side models. Pin 1 connects to the 24V+ positive supply, pin 2 to GND, and pins 3 and 4 are used for RS485A and RS485B differential communication, respectively. They are suitable for applications that require both 24V power and RS485 signals. The product side uses the M8P4AXM1B plug, which mates with the M8P4AXM1G socket on the client side. The source does not specify details such as rated current, rated voltage, protection rating, locking method, cable length, or operating temperature; these should be confirmed against the connector specifications when selecting a model. This series is commonly used for compact connections to sensors, actuators, controllers, and fieldbus devices.