product

030 Series Hydraulic Swing Clamp Cylinders

030 Series Hydraulic Swing Clamp Cylinders

This series of 030 hydraulic swing clamp cylinders features carbon steel bodies treated by carbonitriding for a hard, wear-resistant surface. No mounting holes need to be prepared in advance; the cylinders bolt directly to the worktable and are suitable for clamping thicker workpieces. Two types are available: single-acting models use a spring for retraction, providing a simple system, while double-acting models use hydraulic circuits to control clamping and release. The swing direction can be left or right. The standard swing angle is 90°, with custom angles of 30°, 45° and 60° available. Bore diameters range from Φ14 to Φ45, vertical strokes from 8 to 14 mm, and total strokes from 16.5 to 27.9 mm. Theoretical clamping force at 250 kg/cm² ranges from 180 to 1,960 kg. The operating pressure range is 35–250 kg/cm², and standard hydraulic oil is used. Models include 030LS/RS/LD/RD-22/52/92/121/202 to suit a range of fixture applications.

040 Series Swing Clamp Cylinder

040 Series Swing Clamp Cylinder

The 040 Series swing clamp cylinder features an externally threaded barrel for direct mounting on fixture plates. It is available in single-acting (spring return) and double-acting (hydraulic control for clamping and release) versions. Choose a right-hand (R) or left-hand (L) swing direction. Bore sizes range from Φ14 to Φ45 mm, vertical stroke from 8 to 14 mm, and total stroke from 16.5 to 27.9 mm. Theoretical clamping force is 180–1,960 kg at 250 kg/cm². The operating pressure range is 35–250 kg/cm². The standard swing angle is 90°; custom angles of 30°, 45°, and 60° are also available. The barrel is made of rotary steel and treated with carbonitriding for a hard, wear-resistant surface. Ideal for rapid clamping and release in a wide range of fixtures.

050 Series Hydraulic Swing Clamp Cylinder

050 Series Hydraulic Swing Clamp Cylinder

The 050 Series Hydraulic Swing Clamp Cylinder has a very low mounting height, making it suitable for applications with limited space. Its main body can be recessed below the worktable surface. Installation is simple and requires only three or four bolts. It is available in single-acting and double-acting versions. The single-acting version has a simple internal system with no unloading circuit and uses a spring for return; it can return without a load. On the double-acting version, clamping and release are controlled entirely by the hydraulic circuit, with the process controlled by switching the direction of the directional control valve. The cylinder body is made of carbon steel and treated by carbonitriding for high surface hardness and good wear resistance. The cylinder bore ranges from Φ14 to Φ45 mm, the vertical stroke from 8.1 to 14.0 mm, and the total stroke from 16.5 to 27.9 mm. The theoretical clamping force at 250 kg/cm² ranges from 173 to 1,830 kg. The operating pressure range is 35–250 kg/cm². The standard swing angle is 90°, with 30°, 45°, and 60° angles available on request. The 050 Series offers right-hand (R) and left-hand (L) rotation, single-acting (S) and double-acting (D) operation, and model sizes 22, 52, 92, 121, and 202.

06B Shenma Finished Bore Sprocket

06B Shenma Finished Bore Sprocket

The 06B (3/8-inch) Shenma finished bore sprocket is machined from 45# round steel, with induction-hardened teeth and a blackened surface for high wear resistance and strength. It is suitable for use with standard 06B roller chains. Available with 10 to 20 teeth, the sprockets have pitch diameters of 30.8-60.8mm, outside diameters of 34-64mm, hub diameters of 20-43mm, overall lengths of 22-24mm, and weights of 0.08-0.32kg. Finished bore options include 10, 12, 14, 15, 16, 17, 18, 20, and 25mm to suit different shaft diameters. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, and pallets.

06B Series Shenma Standard Sprocket

06B Series Shenma Standard Sprocket

The 06B series (3/8-inch) Shenma standard sprocket is designed for single-strand 06B roller chain with a 9.525mm pitch. It is made entirely of forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging machinery and agricultural machinery. The primary specification is tooth count, with 55 options from 9T~72T. As the tooth count increases, the outside diameter Do ranges from 30.0mm to 221.0mm and the hub diameter BD from 19mm to 85mm. Total thickness B ranges from 18~25mm, and bore diameter d is available in six sizes: 8, 10, 12, 14, 16 and 20mm. Individual weights range from 0.05kg to 2.44kg. Select the model by the required tooth count (transmission ratio/linear speed), then check the bore diameter against the shaft diameter. The bore can be enlarged or a keyway machined if necessary. All specifications listed in the table are in stock and available for same-day shipping, packed in cartons, wooden crates or on pallets.

Shenma 06B 3/8-inch Duplex Standard Sprocket Series

Shenma 06B 3/8-inch Duplex Standard Sprocket Series

The Shenma 06B (3/8-inch) duplex standard sprocket fits 06B-2 duplex roller chain with a 9.525mm pitch. Made from forged A3 steel, it has induction-hardened teeth for good surface hardness and wear resistance, making it suitable for low- to medium-speed drives. The range covers 10~50 teeth, with outside diameters of 34.0~154.0mm, hub diameters of 20~80mm, overall thicknesses of 24/28/35mm, a tooth width of 15.4mm, bore diameters of 8~16mm, and unit weights of 0.07~2.65kg. All sizes are in stock and can ship as early as the same day. Packaging options include cartons, wooden cases, and pallets. These sprockets are widely used in conveyors, packaging machinery, agricultural machinery, and general industrial drives.

08B Shenma Finished Bore Sprocket

08B Shenma Finished Bore Sprocket

The 08B (4 fen) Shenma finished bore sprocket has a 12.7mm pitch, 8.51mm roller diameter, 7.95mm inner width and 7.2mm tooth width. It fits 08B single-strand roller chain. Available with 9T~40T teeth, it has an outer diameter of 41~166.5mm, pitch diameter of 37.13~161.87mm, hub diameter of 24~62mm, overall length of 22~28mm and unit weight of 0.11~1.9kg. The sprocket is machined from 45# round steel (45# steel), with induction-hardened teeth and a black oxide finish for rust protection. Depending on the tooth count, finished bore (hub bore) options include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 25, 28, 30, 35, 38, 40, 42 and 45mm. Large and small hubs can be selected separately. Depending on the bore size, 4×1.8 or 5×2.3 keyways and M4 set screw holes are also available. All specifications listed in the table are in stock and available for same-day dispatch. Packaging options include cartons, wooden crates and pallets.

08B Series Double-Row Sprockets

08B Series Double-Row Sprockets

The 08B double-row sprocket, also known as a 4-fen double-row sprocket, is a standard Shenma sprocket made from forged A3 steel. Its teeth are induction hardened for good wear resistance and load capacity. It is suitable for 08B double-row roller chain drives. The catalog lists standard sizes from 10 to 60 teeth, with dimensions including outside diameter Do, boss diameter BD, total thickness C and bore diameter d. All models listed in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets.

08B 45# Steel Standard Double-Single Sprocket

08B 45# Steel Standard Double-Single Sprocket

The Shenma 08B (4-fen) standard double-single sprocket is machined from 45# steel round bar, with induction-hardened teeth, for drive applications using 08B chain. The catalog lists standard sizes with 11–28 teeth, outside diameters of 50–118mm, hub diameters of 29–97mm, a total thickness of 30mm, an extended version thickness of 35mm, row spacing of 23mm, extended version row spacing of 28mm, bore diameters of 10–18mm, and an approximate unit weight of 0.30–2.21kg. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, or pallets.

0927 Series Solenoid Valves

0927 Series Solenoid Valves

The 0927 Series is a two-position, two-way, pilot-operated (normally closed) diaphragm solenoid valve with a stainless steel body. It is suitable for water, oil, gas, and other media. Thread options include G thread (standard) or NPT thread (T). Operating voltage options are AC 220 V (A), AC 110 V (B), and DC 24 V (C). Its compact design and reliable operation make it widely used in automation controls and industrial piping systems.

Series 10 Low-Profile Welded Casters

Series 10 Low-Profile Welded Casters

This series of low-profile welded casters, also known as low-center-of-gravity casters, is made by injection-molding high-strength nylon around an ultra-high-strength plastic core. Featuring a low center of gravity, high load capacity, and low mounting height, these casters are suitable for mobile medium- to heavy-duty equipment. The main sizes are 2.5 and 3 inches, with materials including PH (resistant to high and low temperatures), PU (polyurethane), RV (rubber), and PA (nylon). Equipped with integrated precision ball bearings, they offer excellent chemical stability, resistance to high and low temperatures and to acid, alkali, and salt solutions, and low rolling resistance. They are widely used in material-handling equipment.

10 Series Cable Carriers

10 Series Cable Carriers

The 10 Series is a range of plastic cable carriers designed to protect and guide moving cables and pneumatic hoses in machine tools and automation equipment. They operate smoothly and quietly, with a service life of 10 million cycles in reciprocating tests. Cables can be installed or removed without opening the carrier. The carriers are available in non-openable and openable designs for convenient cable routing and maintenance. The series comes in three bend radii, R18, R28 and R38, with corresponding external heights H of 50, 70 and 90 mm and external widths D of 40, 50 and 60 mm. Carrier length is calculated as chain length = S/2 + K, where S is the travel distance and K = π·R + safety allowance. The corresponding K values for the three radii are 90, 120 and 150. The actual installed height is H_F = H + 14 mm (load 0.2 kg/m). Select the size based on travel distance, bend radius and available installation space, and choose the appropriate mounting method for the connectors.

100M Series Base

100M Series Base

These bases are designed for use with 100/200/300/400 series modules or valve plates. Made of aluminum alloy, they are available in a range of dimensions to suit different installation requirements. The ordering code consists of the series designation (100M/200M/300M/400M) and the F code for the number of stations (any number). The dimensional tables list the installation dimensions for each model, including A, B, C, E, F, G, H, K, M, R, S, W, X, Y, and threaded port Q. Dimension L is calculated based on the number of stations N (for example, for 100M-□F, L = (N-1) × 19 + 38). The bases support any number of stations, making them adaptable to a wide range of applications.

10A/12A Shenma Finished-Bore Sprockets

10A/12A Shenma Finished-Bore Sprockets

Shenma finished-bore sprockets (10A/50B, 12A/60B) are suitable for 5-fen (10A) and 6-fen (12A) roller chain drives. Made from 45# steel, they have induction-hardened teeth and a blackened finish for good wear resistance and fatigue strength. The 10A/50B chain has pitch P=15.875mm, W=9.53mm, DR=10.16mm and T=8.7mm. Sprockets have 10~35 teeth, an outer diameter of 57.5~184mm, a pitch diameter of 51.37~177.10mm, a hub diameter of 35~75mm, an overall length of 24~31mm, a unit weight of 0.27~2.2kg, a finished bore of 10~45mm, a chain groove width of 4.1mm and an M4 screw hole. The 12A/60B chain has pitch P=19.05mm, W=12.7mm, DR=11.91mm and T=11.7mm. Sprockets have 9~30 teeth, an outer diameter of 64~190mm, a pitch diameter of 55.70~182.25mm, a hub diameter of 36~75mm, an overall length of 27~36mm, a unit weight of 0.41~3.5kg and a finished bore of 1

10A Series (5/8-inch) Shenma Standard Sprocket

10A Series (5/8-inch) Shenma Standard Sprocket

The 10A series (5/8-inch) Shenma standard sprocket is designed for roller chain drives and fits 10A (5/8-inch) chains. The catalog lists the outside diameter D0, hub diameter BD, overall thickness BL, bore diameter d, and weight for sprockets with 9~76 teeth, making it easy to select a model based on the transmission ratio and available installation space. The sprocket has a one-piece construction with a hub and is suitable for general industrial drives, conveying equipment, agricultural machinery, and similar applications. Confirm the required dimensions based on the chain specification, tooth count, shaft diameter, and load.

10A Double-Row Sprocket (5/8 inch)

10A Double-Row Sprocket (5/8 inch)

The 10A (5/8 inch) standard double-row sprocket is compatible with ISO 10A / ANSI 50 double-row roller chains (15.875mm pitch). Made from forged A3 steel, it has induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and food machinery. The catalog includes 37 sizes with 10~46 teeth: tooth outside diameter 58.0~238.0mm, hub diameter 30~100mm, overall thickness BL 39.00~50.00mm, total tooth thickness C 26.0mm, bore diameter 10~25mm, and unit weight 0.31~14.88kg. All sizes are in stock and available for same-day dispatch, packaged in cartons, wooden cases or on pallets. Select a size based on chain number 10A-2 and the required tooth count. As the tooth count increases, the outside diameter, weight and torque capacity increase accordingly, while the transmission ratio decreases.

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel

The 10A series 5/8-inch single-strand standard sprocket is made of 45# steel and fits ANSI 10A single-strand roller chain with a 15.875mm pitch. It is available in 40 sizes with 10~50 teeth. The teeth are induction hardened for good surface hardness and wear resistance, making the sprocket suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and other applications. For each tooth count, the catalog lists the outside diameter Do (57.5~259mm), hub diameter BD (40~100mm), overall thickness BL (28~40mm), bore diameter d (10~20mm) and weight (0.27~6.72kg). Select a sprocket by tooth count and bore size; the bore can be further machined with a keyway or modified as needed. All sizes listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

10A 45# Steel Standard Double-Single Sprocket

10A 45# Steel Standard Double-Single Sprocket

The Shenma 10A (5/8-inch) standard double-single sprocket is machined from 45# round steel, with induction-hardened teeth for high surface hardness, wear resistance and durability. It is suitable for 10A double-row roller chain drives with a 15.875mm pitch. Sizes range from 11~30 teeth, with outside diameters of 63~158mm, hub diameters of 35~130mm, a standard overall thickness of 35mm (40mm for the extended version), row spacing of 27mm (32mm for the extended version), bore diameters of 12~20mm and unit weights of 0.51~4.82kg. The full range is regularly stocked and available for same-day dispatch, with carton, wooden crate or pallet packaging.

12A Shenma Finished Bore Sprocket

12A Shenma Finished Bore Sprocket

The 12A (6 fen) Shenma finished bore sprocket is a single-strand, standard-bore plate sprocket compatible with 12A/60B roller chains (chain pitch P=19.05mm, inner plate width W=12.7mm, roller diameter DR=11.91mm, and chain plate thickness T=11.7mm). Made from 45# steel, it has high-frequency hardened teeth for a hard, wear-resistant tooth surface and a black oxide finish for rust protection. Finished (pre-machined) bore sizes are available in 18 options: 10, 12, 14, 15, 16, 17, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40, 42, and 45mm. The bore can be enlarged as needed or fitted directly. Corresponding keyway B sizes are 4×1.8 (bore diameters 10, 12) and 5×2.3 (bore diameter 14), with threaded holes M of M4 and M5, respectively. Tooth counts range from 9~30, outside diameter Do from 64mm to 190mm, pitch diameter D1 from 55.70mm to 182.25mm, and hub diameter BD from 36~75mm (larger tooth counts have dual hubs of 56/67, 57/67, 64/67, etc.); overall length

12A Series (6-fen) Shenma Standard Sprockets

12A Series (6-fen) Shenma Standard Sprockets

The 12A series (6-fen) Shenma standard sprockets are designed for 12A/60B roller chains. They have a 19.05mm pitch, an 11.91mm roller diameter, and a 12.7mm inner plate width. The catalog provides a complete dimension table by tooth count, covering 9–60 teeth, as well as 65, 70, 75, and 80 teeth. Parameters for each tooth count include outside diameter, hub diameter, overall thickness, bore diameter, and weight, making it easy to select a sprocket based on transmission ratio and installation space. Standard sprockets are commonly used in chain drives for motor and gearbox outputs, conveyor lines, packaging machinery, and agricultural machinery, and can be paired with chains of the same pitch and suitable shaft ends. Most overall thicknesses in the table range from 27–30mm, while bore diameters vary with tooth count from approximately 12–16mm.

12A Standard Double-Row Sprocket

12A Standard Double-Row Sprocket

The 12A standard double-row sprocket, commonly known as a 6-fen double-row sprocket, has a 19.05mm pitch and is compatible with 12A double-row roller chain drives. It is available in 37 sizes with 10~46 teeth: outside diameter 70.0~372.0mm, boss diameter 40~110mm, overall thickness 45.00~60.00mm, total tooth thickness 34.0mm across all sizes, bore diameter 12~25mm, and unit weight 0.58~27.2kg. The sprocket body is made from forged A3 steel, and the teeth are induction hardened for wear and impact resistance. It is suitable for medium- and low-speed, heavy-duty drives in conveyor lines, agricultural machinery, packaging equipment, and general industrial equipment. All sizes are in stock and available for same-day dispatch, with packaging in cartons, wooden cases, or on pallets. Select the appropriate size based on the chain specification (12A double-row), required tooth count, and equipment shaft diameter (bore d). Higher tooth counts provide smoother operation but increase the outside diameter and weight.

12A Double-Row Standard 45# Steel Sprocket

12A Double-Row Standard 45# Steel Sprocket

The Shenma 12A (6 fen) double-row standard 45# steel sprocket is designed for 12A double-row roller chain with a 19.05 mm pitch. It is suitable for applications requiring double-row chain drives, higher torque transmission or a higher safety factor. The sprocket body is turned from 45# round steel, and the teeth are induction hardened for high surface hardness and wear resistance, extending their service life with the chain. The catalog lists 27 common sizes from 10 to 36 teeth, along with outside diameter Do (70~251 mm), hub diameter BD (42~110 mm), overall thickness BL (52~60 mm), total tooth width C (34.1 mm), bore diameter d (12~25 mm) and unit weight (0.68~12.77 kg), making selection and drive calculations easier. The full range is regularly stocked and available for same-day dispatch. The bore can be further machined as needed, including enlargement and keyway cutting. Packaging options include cartons, wooden cases or pallets.

14M Timing Belts

14M Timing Belts

14M curvilinear-tooth timing belts feature a 14 mm pitch and a curved tooth profile for smooth, quiet power transmission. This range includes a variety of standard lengths from 784 mm to 10,072 mm, making it suitable for industrial automation applications such as machine tools, packaging machinery, and printing machinery. Made from premium-quality chloroprene rubber with fiberglass tensile cords, these belts offer high tensile strength, wear resistance, and maintenance-free operation without lubrication. Models are named by pitch length and tooth profile; for example, 784-14M denotes a 14M timing belt with a pitch length of 784 mm.

14M Series Curvilinear Tooth

14M Series Curvilinear Tooth

14M-series timing belts have a 14 mm pitch and a curvilinear tooth profile, making them suitable for medium- to high-torque transmission. This page lists 25 sizes, from 14M-784 to 14M-1610, with tooth counts ranging from 56 to 115 and standard lengths from 784 mm to 1,610 mm. Designed with a standard tooth profile, these belts are compatible with 14M toothed pulleys and are widely used in machine tools, automation equipment, packaging machinery, and other applications. For the outside adjustment allowance, see Table 11-b in the Design section. This applies to models including S8M, S14M, 8M, and 14M.

Series 15

Series 15

Series 15 cable drag chains are plastic cable carriers used for cable protection in factory automation. They are available as a semi-enclosed, non-opening type (WSL09) and an easy-to-press, externally opening type (WSL10). Made of PA6+G3F3, they are black and suitable for temperatures from -20°C to 120°C. The pitch is 22 mm, with 46 links per meter. Inner width options: fixed at 15 mm for WSL09, or 15/20/30 mm for WSL10. Inner height options: 15/20 mm. Available bend radii: R28/R38/R48. Styles: non-opening (B) and externally opening (W). Special connectors are supplied and sold as complete sets. Suitable for cables with a diameter of up to 13 mm. When ordering, specify the connector model and length (in meters or number of links).

15 Series Semi-Enclosed Drag Chain with Inner Opening

15 Series Semi-Enclosed Drag Chain with Inner Opening

This series of 15 Series semi-enclosed drag chains opens from the inner side. It has an internal height of 15 mm and is available in internal widths of 15 mm and 20 mm. The external height is 20 mm or 23 mm, with external widths ranging from 23 mm to 50 mm. Five bend radii are available: 28, 38, 48, 75, and 100 mm. Opening styles include semi-enclosed and inner-side opening. The connector hole spacing is 14.5 mm. Suitable for protecting cables under light loads, it is easy to install and maintain.

Shenma 16A Series (1-inch) Standard Sprockets

Shenma 16A Series (1-inch) Standard Sprockets

Shenma 16A series (1-inch) standard sprockets are single-strand sprockets with an integral hub, designed for roller chains with a 1-inch pitch (25.4mm, corresponding to the ANSI 80 series). They are widely used in conveyor lines, packaging machinery, agricultural machinery, and general power transmission systems. The catalog lists 47 common tooth counts from 9T to 65T, with tooth count as the sole specification variable. For each size, it provides the outside diameter Do (85.0~536.0mm), hub diameter BD (48~110mm), overall thickness BL (31.0~45.0mm), bore diameter d (14/16/18/20/25mm), and unit weight (0.58~17.80kg). Sprockets with fewer teeth have smaller bores and thinner bodies, while those with more teeth have thicker bodies and larger hubs for rigidity. Select the tooth count based on the transmission ratio, center distance, and chain speed, then choose a bore to match the shaft diameter or machine a keyway as needed.

16A Standard Duplex Sprocket

16A Standard Duplex Sprocket

The 16A standard duplex sprocket, commonly known as an 8-fen duplex sprocket, is designed for 16A duplex roller chain drives with a 25.4mm pitch. It is machined in one piece from forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It maintains consistent meshing accuracy and service life under medium to heavy loads and continuous operation. Standard sizes range from 10T to 50T, with outside diameter Do from 94.0mm to 416.0mm, boss diameter BD from 52~120mm, overall thickness BL from 65~73mm, and total tooth thickness C of 43.0mm throughout. Standard bore diameters d are 16mm and 20mm; lower tooth-count sizes are also available with a 16mm bore. Unit weight ranges from 1.50~37.40kg. The entire range is normally stocked for same-day dispatch and is packed in cartons, wooden cases or on pallets. These sprockets are suitable for conveyors, packaging machinery, agricultural machinery and general industrial drive shafts. The same page also lists specifications for 6-fen (12A) duplex sprockets for comparison only; they are not part of this series.

17251 Series AC Axial Fan

17251 Series AC Axial Fan

This series of AC axial cooling fans has a frame size of 172 × 51 mm. It is available with either sleeve or ball bearings and in high-speed (H) and medium-speed (M) versions. Multiple voltage options are supported: 100/125 V, 200/240 V, and 380/420 V. The fans operate at 50/60 Hz, with a power range of 28–40 W, speeds of 2,000–2,800 RPM, airflow of 289–356 CFM, and noise levels of 49–59 dBA. The impeller is made of PBT + 30% glass fiber, and the frame is aluminum alloy. Lead wires are AWG #18 UL1015. The operating temperature range is −10 to +85 °C, and the weight is 950 g. These fans are widely used for cooling communications equipment, servers, power supplies, and other applications.

1730 Series Stopper Cylinders

1730 Series Stopper Cylinders

1730 series stopper cylinders position, stop and cushion pallets or workpieces on automated conveyor lines. They provide stopping, cushioning and downward reset functions. The series includes F1730 and YGZX designs, with sizes such as 25.30, 25.35, 50.50, 32-40 and 50-50. Stopping loads range from 150~2000kg, with a stopping stroke of approximately 30~50mm and a lowering stroke of approximately 26~45mm. Options include no cushioning, spring cushioning and hydraulic cushioning to suit different impact energies and cycle times. Select the size and cushioning type based on the load, conveyor speed, stopping frequency and installation space.

Series 18

Series 18

Series 18 easy-open plastic cable carriers are available in two configurations: pin-connected, outward-opening and semi-enclosed, inward-opening. The body is made of PA6+GF30 and is black, with an operating temperature range of -20°C to 120°C. Designed to protect and guide cables in industrial automation equipment, these carriers feature a push-to-open design for quick, easy maintenance. The pin-connected, outward-opening model is suitable for external installation, while the semi-enclosed, inward-opening model is intended for internal installation and comes with fixed connectors. The semi-enclosed, inward-opening model (WSL14F) is available with several internal heights (18/28/38/48 mm) and bend radii (25/28/38/48 mm, among others) to suit different cable-routing requirements. When ordering, specify the length (in meters or number of links) and connector model.

Series 18 Non-Openable Cable Carrier

Series 18 Non-Openable Cable Carrier

Series 18 non-openable cable carrier with an internal height of 18 mm, an internal width of 25 mm, and an external height of 23.5 mm. Available external widths: 25, 28, 35, 47, and 50 mm. Choose from bend radii of 28, 38, 48, 75, or 100 mm. Available in outward-opening and inward-opening versions, with a connector hole spacing of A = 14.5 mm. Designed to protect and guide cables and hoses in automation equipment.

Series 18 cable carrier

Series 18 cable carrier

The Series 18 cable carrier has an inner height of 18 mm, an inner width of 25 mm, and an outer height of 23.5 mm. Available outer widths are 25, 28, 35, 47, and 50 mm, and available bend radii are 28, 38, 48, 75, and 100 mm. It is available with either an outer-opening or inner-opening design, with a connector hole spacing of A = 14.5 mm. It protects and guides cables, pneumatic hoses, and other lines in automation equipment.

18 Series Lightweight Cable Carriers (BF18/QS18)

18 Series Lightweight Cable Carriers (BF18/QS18)

The 18 Series lightweight plastic cable carriers include the BF18 (semi-enclosed, non-opening and opening designs) and QS18 models. Inner height: 18mm; inner width: 18mm / 25mm; outer height: 24mm; outer width: 29mm / 36mm. The standard bend radius is R28, with R38, R48, R60 and R75 also available. Pitch: 33.5mm; 30 links per meter; weight: approximately 0.313~0.351 kg/m. The carriers run smoothly and quietly, with a tested service life of up to 10 million reciprocating cycles. The outer side plates open for easy cable inspection or replacement. Suitable for cables up to 16mm in diameter. Calculate chain length using L = S/2 + K, where K = π·R + safety allowance. Refer to the table for H, D and K values for each bend radius. Actual installation height H_F = H + 24mm (load 0.5kg/m).

20/30 Series American-Style Floor Locks

20/30 series American-style floor locks support and secure mobile equipment from underneath. They can be bolted or welded to the bottom of the equipment. Pressing the pedal raises and secures the equipment, while an internal spring holds the rubber foot firmly against the floor, stabilizing the equipment and preventing damage to the casters from prolonged loading. This series is suitable only for level floors, not sloped surfaces. The welded steel assembly includes a base frame, foot pad plate and internal spring. Models cover 20 series 4″ and 5″ and 30 series 4×2″~8×2″, with base heights of 121~247 mm, mounting heights of 94~219 mm, base plate dimensions of 93×64 mm or 115×100 mm, and mounting holes of 9 mm round or 19×10 mm slotted.

200M Series Base

200M Series Base

The 200M Series Base is designed for 200 Series pneumatic valves and provides mounting and connection functions. The order code is 200M-F, with any number of stations available (F). The dimensional table lists the overall dimensions: A=61mm, B=51mm, C=21mm, E=4.3mm, F=22.4mm, G=23mm, H=6mm, K=170mm, M=189mm, R=43mm, S=32mm, W=92.5mm, X=26mm, Y=35mm. The threaded port is G1/4".

Shenma 2052 Series Double-Pitch Sprockets

Shenma 2052 Series Double-Pitch Sprockets

Shenma 2052 series double-pitch sprockets fit 2052/210AL double-pitch roller chains (chain pitch 31.75mm, inner chain width 9.4mm, roller diameter 19.05mm, tooth width 8mm). Available with 8~20 teeth, an outside diameter of 97~217mm, hub diameter of 53~80mm, overall thickness of 35mm, bore diameter of 16~20mm, and unit weight of 0.70~3.31kg. Made of forged A3 steel, the sprockets have induction-hardened teeth for wear resistance and high load capacity. They are suitable for double-pitch chain drives in conveyor lines, packaging machinery, agricultural machinery, and other applications. All models listed in the table are in stock and available for same-day shipment, with carton, wooden case, or pallet packaging.

Shenma 2062 Series Double-Pitch Sprockets

Shenma 2062 Series Double-Pitch Sprockets

Shenma 2062 series double-pitch sprockets fit 2062/212AL double-pitch roller chains. Chain pitch is 38.1mm, chain inner width is 12.57mm, roller diameter is 22.23mm, and tooth width is 11mm. Available in 26 tooth counts from 8~33 teeth, with outside diameters of 113.0~443.0mm, hub diameters of 70~90mm, an overall thickness of 40mm, bore diameters of 18~30mm, and a weight of approximately 1.50~14.12kg per piece. The sprockets are made from forged A3 steel with induction-hardened teeth and are suitable for conveying, packaging, agriculture, and general industrial drives. All specifications listed in the table are in stock and available for same-day dispatch, packaged in cartons, wooden cases, or on pallets.

2082 Series Double-Pitch Sprockets

2082 Series Double-Pitch Sprockets

Shenma 2082 series double-pitch sprockets are compatible with 2082/216AL double-pitch roller chains (chain pitch 50.8mm, inner width 15.75mm, roller diameter 28.58mm). They are available with 8~96 teeth, outside diameters of 152~1848mm and hub diameters of 75~100mm. All models have a total thickness of 45mm, with three bore sizes: 20mm, 25mm and 30mm. Each sprocket weighs approximately 2.3~96kg. Dimensions correspond to the tooth count. Select the sprocket according to the chain model and required tooth count; the bore and keyway can be machined to suit the shaft diameter. Suitable for low-speed, large-pitch chain drives in conveyor lines, packaging, logistics, agriculture and livestock applications. Tooth induction hardening and other strengthening treatments, as well as custom designs, are available.

Shenma 20A Series (1.2 in) Standard Sprockets

Shenma 20A Series (1.2 in) Standard Sprockets

Shenma 20A series (1.2 in) standard sprockets are designed for 100B/20A roller chains, with a sprocket pitch of 31.75 mm and a roller diameter of 19.05 mm. They are suitable for single-strand roller chain drives. The sprockets have a one-piece construction with a hub and are available in 9~43 tooth sizes: outside diameter 107.0~447.0 mm, hub diameter 60~130 mm, overall thickness 40.0~45.0 mm, bore diameter 18/20/25/30 mm, and unit weight 1.20~28.00 kg. As the tooth count increases, the outside diameter increases linearly with the pitch, while hub and bore diameters increase in steps to accommodate greater transmitted torque. The sprockets have a plain bore that can be machined with a keyway or set screw hole as needed. They are suitable for medium- to heavy-duty, low-speed drives in conveyors, packaging machinery, agricultural machinery, and similar equipment. Select the bore size according to the chain specification (20A/100B), required tooth count, and shaft diameter. Too few teeth will increase the polygonal effect, so select the tooth count for the actual operating conditions.

20A Series Standard Double-Row Sprocket (10-fen Double-Row)

20A Series Standard Double-Row Sprocket (10-fen Double-Row)

The Shenma 20A standard double-row sprocket is a 10-fen double-row roller chain sprocket with a 31.75 mm pitch, designed for double-row roller chain drives. Its body is made from forged A3 steel, and its teeth are induction hardened for better tooth surface wear resistance than standard quenched and tempered parts. Standard sizes range from 10 to 30 teeth, with tooth outside diameters of 117.0~318.7 mm, hub diameters of 67~120 mm, overall thickness BL of 75/78/80 mm, total tooth thickness C of 53 mm, and bore diameters d of 20/25/30 mm (smaller bores are paired with lower tooth counts). Select by chain size 20A, double-row configuration, required tooth count, and shaft diameter. Common sizes across the range are in stock and available for same-day shipment. Packaging options include cartons, wooden crates, or pallets. Suitable for medium- to heavy-duty drives in conveyor lines, packaging machinery, agricultural machinery, mining equipment, and other applications.

Shenma 24A Series (1.5-inch) Standard Sprockets

Shenma 24A Series (1.5-inch) Standard Sprockets

Shenma 24A series (1.5-inch) standard sprockets are single-strand roller chain sprockets compatible with 120B/24A chains. They have a chain pitch P=38.1mm, roller diameter W=25.4mm, roller bore DR=22.23mm, and sprocket body thickness T=23mm. Available with 10~38 teeth, they have an outside diameter Do of 137.0~477.0mm, boss diameter BD of 75~135mm, overall thickness BL of 45~55mm, bore diameter d of 20~30mm, and individual weight of 2.48~32.20kg. Different bore and tooth count combinations can be selected as needed. Made from forged A3 steel, the sprockets have induction-hardened teeth for good surface hardness and wear resistance, with strong load capacity under impact. They are widely used in conveying machinery, agricultural machinery, packaging lines, and general industrial drives. All models listed in the table are in stock and can ship as soon as the same day, packed in cartons, wooden cases, or on pallets.

24A Standard Double-Row Sprocket (12-fen Double-Row Series)

24A Standard Double-Row Sprocket (12-fen Double-Row Series)

The Shenma 24A (12-fen) standard double-row sprocket is made from forged A3 steel, with induction-hardened teeth for good surface hardness and wear resistance. It is suitable for medium- to heavy-duty drives using 24A double-row roller chain with a 38.1mm pitch. The catalog covers 16 sizes with 10~25 teeth: outside diameter 137.0~319.0mm, hub diameter 78~130mm, overall thickness 93.00~96.00mm, total tooth width 68.3mm, and bore diameters of 25mm or 30mm. Select primarily by tooth count: both the outside diameter and pitch circle increase as the number of teeth increases. Choose according to the required transmission ratio and available installation space. All sizes listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets. Common applications include chain drives on conveyor lines, packaging machinery, agricultural machinery and construction equipment. The sprocket can be paired with double-row roller chain of the same pitch.

Series 25 Plastic Cable Carrier

Series 25 Plastic Cable Carrier

The Series 25 plastic cable carrier has an internal height of 25 mm and is available in internal widths of 25 mm, 38 mm, 57 mm, 77 mm, and 103 mm. Its external height is 35 mm/35.5 mm, and its external width varies according to the internal width. Available bend radii (R) are 55 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, and 250 mm. Opening styles include versions that open on both sides and one-piece versions that open from the inside. Connector hole spacing A is 13 mm, 23 mm, 45 mm, or 62 mm, depending on the internal width. Designed for guiding and protecting wires and cables in automation equipment, it offers high strength, wear resistance, and excellent flexibility.

25 Series (1/4-inch) Standard Sprocket

25 Series (1/4-inch) Standard Sprocket

The Shenma 25 Series (1/4-inch) standard sprocket is a single-strand sprocket with a standard tooth profile, designed for 1/4″ (6.35 mm) pitch roller chain. The catalog uses tooth count as the primary selection parameter, with 57 sizes ranging from 8 to 64 teeth. The outside diameter Do ranges from 19.5 mm to 131.5 mm, the hub diameter BD from 14 to 132 mm, and the overall thickness BL is 15 mm throughout. Bore diameter d is 6, 8, 10, or 12 mm depending on the tooth count, and unit weight ranges from 0.02 to 0.88 kg. Select the tooth count based on the transmission ratio and available installation space, then check the hub diameter, overall thickness, and bore size. Use with matching 1/4-inch pitch chain. Typical applications include small reduction drives and drive stations in conveying, packaging, textile, and automation equipment.

28.65.FGP One-Piece Cable Separator

28.65.FGP One-Piece Cable Separator

The 28.65.FGP one-piece cable separator is an accessory for separating cables inside the 28.65 cleanroom cable chain. It significantly reduces installation time compared with conventional horizontal and vertical dividers. It measures 69 mm wide and 38.5 mm high and has 8 cable openings, with opening sizes A(5×14 mm), B(14×14.5 mm), and C(14×14.5 mm). The separator can be used on its own to divide the internal space in light-load, short-travel applications, or combined with medium-duty/heavy-duty support rails to separate and support cables and pneumatic hoses inside the chain. The catalog recommends 12~18 separators per meter. It is compatible with the 28.65 cable chain.

28.65 Series Cleanroom Conduit

28.65 Series Cleanroom Conduit

The 28.65 series cleanroom conduit (Cleanroom conduit 28.65) is made of TPU and provides protected guidance for cables and pneumatic tubing in clean environments. The conduit has an internal volume of 1515mm³, and cable and tubing fill must not exceed 70%. The standard version accommodates up to 6 cables or tubes of Φ8~Φ10 + 6 of Φ6~Φ7; with an integrated divider, it accommodates up to 6 of Φ6~Φ8 + 6 of Φ4~Φ5. The recommended divider density is 12~18 per meter. The minimum bend radius is R60, with R70 recommended. Unsupported length is ≤850mm, suitable travel is ≤1700mm, mounting height is 150~180mm, interference height is 170~220mm, and the external height of the carrier connector is 45mm. Acceleration is ≤3g, operating temperature is 30±5℃, operating relative humidity is 45±15%, service life is ≥15 million cycles, and the warranty is 18 months. Custom options include antistatic and flame-retardant versions. Accessories include the SZB cable comb plate (secured at the fixed connectors at both ends to prevent cables from tangling and rubbing), the 28.65.FGP integrated divider, and the JH.02.R70 heavy-duty support spine (suitable for

2L Series Fluid Control Valve (2-Way, 2-Position)

2L Series Fluid Control Valve (2-Way, 2-Position)

The 2L series fluid control valve is a direct-acting, normally closed, 2-way, 2-position solenoid valve for on/off control of air, water, steam and other media. It has a brass body and an EPDM seal. It is suitable for liquids with a viscosity below 20CST, with an operating pressure range of 0~1.5MPa, a maximum pressure rating of 1.5MPa, an operating temperature range of -5~185℃ and a voltage tolerance of ±10%. Available flow orifice diameters include 17, 22, 30 and 50mm, with corresponding Cv values of 4.8~48 m³/h and port sizes from 1/2″ to 2″. The model designation consists of the main model (2L+flow orifice diameter code) and the port size code. For example, 2L170-15 indicates a 17mm flow orifice and a 1/2″ port. Contact the manufacturer for custom voltages and specifications.