Linear Motion Accessories

Series 15

Series 15

Series 15 cable drag chains are plastic cable carriers used for cable protection in factory automation. They are available as a semi-enclosed, non-opening type (WSL09) and an easy-to-press, externally opening type (WSL10). Made of PA6+G3F3, they are black and suitable for temperatures from -20°C to 120°C. The pitch is 22 mm, with 46 links per meter. Inner width options: fixed at 15 mm for WSL09, or 15/20/30 mm for WSL10. Inner height options: 15/20 mm. Available bend radii: R28/R38/R48. Styles: non-opening (B) and externally opening (W). Special connectors are supplied and sold as complete sets. Suitable for cables with a diameter of up to 13 mm. When ordering, specify the connector model and length (in meters or number of links).

Series 18

Series 18

Series 18 easy-open plastic cable carriers are available in two configurations: pin-connected, outward-opening and semi-enclosed, inward-opening. The body is made of PA6+GF30 and is black, with an operating temperature range of -20°C to 120°C. Designed to protect and guide cables in industrial automation equipment, these carriers feature a push-to-open design for quick, easy maintenance. The pin-connected, outward-opening model is suitable for external installation, while the semi-enclosed, inward-opening model is intended for internal installation and comes with fixed connectors. The semi-enclosed, inward-opening model (WSL14F) is available with several internal heights (18/28/38/48 mm) and bend radii (25/28/38/48 mm, among others) to suit different cable-routing requirements. When ordering, specify the length (in meters or number of links) and connector model.

30 Series Bridge-Type Cable Carrier

30 Series Bridge-Type Cable Carrier

This series of 30 Series bridge-type cable carriers includes two styles: inner-opening (WSL21N) and outer-opening (WSL21W). Made of reinforced nylon PA6+GF30, the carriers are black and rated for temperatures from -20°C to 120°C. The inner width is 30 mm, the outer height is 40 mm, and the outer width is 54 mm. Choose from bend radii of R38 or R55. The number of links per meter depends on the pitch. Cable carrier connectors are sold as a complete set (moving end + fixed end). Suitable for protecting cables on automation equipment.

30 Series Cable Carriers

30 Series Cable Carriers

30 Series cable carriers are engineering-plastic cable protection chains available in three types: all-black open, all-black enclosed, and quiet enclosed. Made from PA6+GF30 (or PA6+GFR30), they have a black finish and an operating temperature range of -20°C to 120°C. Lightweight, with a short pitch, they offer wear and corrosion resistance and quiet operation, making them suitable for fast cable routing in high-speed applications. Links per meter = 1000 ÷ pitch. Cable carrier end brackets are sold as a set (moving end + fixed end). A range of inner widths, bend radii, and styles is available to suit different applications.

35 Series

35 Series

35 Series low-noise bridge-type cable carrier, made of PA6+GF30, black, and suitable for temperatures from -20°C to 120°C. The carrier opens on both sides for quick, easy cable routing. Its short pitch and light weight help reduce operating noise (depending on speed). It offers excellent wear and corrosion resistance, making it especially suitable for high-speed applications. The number of links per meter is calculated based on the pitch. Cable carrier connectors are sold as a complete set, including the moving-end and fixed-end connectors. Example order: WSL06J-35-50-R75L + length (in meters or number of links) + connector model.

55 Series Multicolor Bridge-Type Cable Carrier, Open on Both Sides

55 Series Multicolor Bridge-Type Cable Carrier, Open on Both Sides

55 Series multicolor bridge-type cable carrier with openings on both sides, made of PA6+GFR30 in black. Operating temperature range: -20°C to 120°C. Pitch: 71.4 mm; 14 links per meter; load capacity: 2.2 kg/m. Chain length formula: chain length = S/2 + K, where S is the travel distance and K = π × R + safety allowance. Actual installation height H1 = H + 75 mm. Compatible with fixed connectors; inner height: 55 mm; inner width range: 50–200 mm. Available bend radii: R100–R400. Connector model: WSL34 Series. Designed to protect cables in industrial automation applications and available in multiple sizes.

XYGA36 Series Draw Latch

XYFR21 Series, Stepped Type

XYFR21 Series, Stepped Type

XYS650-A Series 2-axis

XYS650-A Series 2-axis

Screw-driven. This illustration is for reference only; see the dimensional drawing for delivery specifications. Synchronous motion accuracy is not guaranteed for standard connected stages.

FX3020H Series Three-Section Aluminum Alloy Slides

FX3020H Series Three-Section Aluminum Alloy Slides

Suitable for office equipment, industrial electronic equipment, display shelving, medical equipment, automotive components, and more. Full extension, non-detachable, side-mounted; natural anodized finish. Pull-out: not available.

DFM Series for Precision Grinding

XYFL51 Series, Stepped Type

XYFL51 Series, Stepped Type

Type: stepped type, round-hole double-bend type. Material: SUS304. Surface finish: mirror polish.

RLS Series Rotating Nut Ball Screw

SAC Series Low-Profile Linear Guide

SBR-C Series Linear Round Guide Rail

SBR-C Series Linear Round Guide Rail

LHGW-CB/LHGW-HB Series Guide Rails

ZTZ90-2 Series Shaft-Output Steering Unit

Output type: shaft-output steering unit.

ZPTZ90-2 Series Steering Gear + Gearbox

Output options: single-shaft or dual-shaft output; custom shafts available.

XR17 Series Integrated Motor Base

KR/KM Series Rotary Ball Screws

XYFC88 Series Heavy-Duty Square

XYFC88 Series Heavy-Duty Square

Types: heavy-duty square, horizontal slotted, and precision. The pivot is fitted with a POM bushing to prevent metal-to-metal friction.

EK Series Fixed Side

EK Series Fixed Side

XYT764-A Series 3-axis

XYT764-A Series 3-axis

Belt drive. This image is for reference only; see the dimensional drawings for the delivered specifications. Synchronous motion accuracy is not specified for standard linked slides.

SF Series Precision Ground Series

RBF Series Rotating-Nut Ball Screw – RBF Type

RBF Series Rotating-Nut Ball Screw – RBF Type

Figure 1.2 shows the structure of the RBF type, with the nut, steel balls, bearing sleeve, oil seal, retainer, and screw shaft labeled.

SFM Series – Precision Grinding Grade

SFS-V/W Series Flexible Couplings · Diaphragm Type

SFS-V/W Series Flexible Couplings · Diaphragm Type

Compatible motors include servo motors, stepper motors, and general-purpose motors. Frictional clamping transmits torque without backlash, making these couplings suitable for high-precision control. The body is made of 45# steel, providing high torsional rigidity and high torque transmission. The stainless steel diaphragm accommodates parallel, angular, and axial misalignment and offers good fatigue resistance. The hub design at both ends reduces inertia. The materials and processing table lists the materials and treatments for the body, intermediate shaft, set screws, assembly screws, assembly washers, and diaphragm.

SYX-H-BN/SYX-H-BL Series Slider Guide Rails

The diagram shows the dimensions and moment directions of the slider guide assembly. The table lists slider dimensions, rail dimensions, rail mounting bolt size, rated dynamic load, rated static load, allowable static moments, and weight.

SCN/SCI Series — Precision Ground Series

XYQW105 Series Draw Latch

LEGW-SB/LEGW-CB Series Guide Rails and Blocks

RSFY Series Nut-Rotating Ball Screw

TRS-F Series Low-Profile Assembly Series

BS Series Nut Holder

BS Series Nut Holder

XYFG21 Series Stainless Steel Ball-Bearing Slides

XYFG21 Series Stainless Steel Ball-Bearing Slides

Stopper Type (Economy Model).

NG Series Anti-Creep Crossed Roller Guideway

OFV/DFV Series Precision Ground Ball Screws

ZZ90-3 Series Linear Guide Rails

Output options: single-shaft output, dual-shaft output, and custom configurations available.

ZT47 Series Support Screw Series

ZT47 Series Support Screw Series

KBE Series Linear Motion Slide Units

KBE Series Linear Motion Slide Units

Linear Motion Slide Units

LBRVF Series Curved Guide Rails

N/O Series Crossed Needle Roller Guideway

ZT21 Series Gripper Pad (Round)

ZT21 Series Gripper Pad (Round)

Display name: Gripper Pad (Round).

SAH Series High-Assembly Linear Guideway

OFU/DFU Series (DIN 69051 FORM B) Precision Ground Grade Series

RLB Series Nut-Rotating Ball Screw

ZZ90-2 Series Single-Axis Robot

Output configuration: single-shaft or dual-shaft output; custom shafts available.

XYDK101 Series Pull-Down Latch