Electric Linear Slides

XYS650-A Series 2-axis

XYS650-A Series 2-axis

Screw-driven. This illustration is for reference only; see the dimensional drawing for delivery specifications. Synchronous motion accuracy is not guaranteed for standard connected stages.

Electric Linear Stages

Electric linear stages are high-precision linear motion platforms that integrate standardized guide rails and drives. They offer high rigidity, low vibration, long service life, high reliability, and consistent quality. Their integrated drive and control architecture minimizes communication latency in closed-loop control, enabling precise, smooth linear positioning. Key features include low noise, long service life, high flexibility, excellent positioning repeatability, and fast response. They are suitable for pick-and-place, alignment, and material handling tasks, and are widely used in consumer electronics, renewable energy, semiconductors, medical applications, and other industries.

LF-MSEC Series Electric Linear Slide

The LF-MSEC series is a range of LENFOR (LF) miniature electric linear slides (electric cylinders) with a sliding lead screw drive. The standard lead is 4mm, rated thrust is 40N, maximum speed is 200mm/s, acceleration is 3000mm/s², repeatability is ±0.01mm, and body width is 35mm. Available in strokes of 30/50/75/100mm and other lengths, the series offers standard and brake-equipped versions (D for no brake, B for brake) to maintain position during power outages. It supports PWM, TTL, Modbus RTU(RS485), EtherCAT, NPN/PNP and CAN communication options. Cable exit can be on the right (R) or bottom (B), and customization is available according to customer codes. Compact and precise, the product is widely used in small-scale automation applications such as 3C assembly, dispensing, handling and inspection.

FLWF Series Linear Actuators

The FLWF series consists of slide-type linear actuators. The catalog provides outline dimension drawings showing the body profile and mounting dimensions of each model. The series is available in two frame sizes, 25 and 40, and five mounting types: X, Y, V, EV, and DV. Each type is available in L (left) and R (right) motor/cable exit orientations, providing a range of model combinations. To select a model, first choose the 25 or 40 frame size based on the load and effective travel requirements. Then select the mounting type and left or right orientation to suit the available installation space. Use the mounting hole positions, body length, and other dimensions in the corresponding outline drawing for mechanical design and interference checks. The catalog page provides only outline dimension drawings and does not list specific performance parameters such as rated load, travel, or accuracy.

FX Series Motorized Stages

FX Series Motorized Stages

The FX series comprises standard motorized X-axis stages with linear ball guides, ball screw drives, and aluminum alloy platforms. They are suitable for precision single-axis positioning and reciprocating transfer in automated equipment. Three platform sizes are available: 40×40mm, 60×60mm, and 80×80mm, corresponding to the model prefixes FX40, FX60, and FX80. Different drive and guide configurations, such as GBNR, LBN, and LBNR, can be selected to suit travel and installation requirements. The standard accuracy grade is N. Cable outlets are available on the left (L) or right (N), and the motor wiring can be supplied without a connector (N) or with a D-SUB15 (VGA) connector. Standard mounting features on the platform include 4-φ3.4 through holes, 4-φ6 counterbores 5.5 deep, and 8-M3 threaded holes 5 deep, enabling direct attachment of the driven tooling. The ball screw drive provides high positioning accuracy and repeatability and supports high-frequency reciprocating motion. When selecting a model, confirm the platform size, effective travel, cable outlet direction, motor type, and connector type.

FX Series Electric Linear Stages

FX Series Electric Linear Stages

The FX series electric linear stage is a precision single-axis linear module integrating a ball screw drive and a two-phase stepper motor. It is designed for positioning, handling, dispensing, inspection, and other automation applications. The series is available in two sizes, FX60 and FX80. Its steel transmission unit uses a ball screw drive (B) for high rigidity, low backlash, and smooth operation. Motor options include a two-phase stepper motor (N) or no motor (X). Cable exit options are right (R) or left (L), and a D-SUB15 (VGA) connector (D) is available. The model code combines “FX+size” with “transmission unit(G)+accuracy grade(B)+motor type(N),” as in FX60-GBN and FX80-GBN.

FXS Series Motorized Linear Stage

FXS Series Motorized Linear Stage

The FARAY FXS Series standard motorized X-axis stage features a linear ball guide and ball screw drive. It has a 50×50mm table, 20/30mm travel, and a ball screw with an 8mm diameter and 1mm lead. The stainless steel body has an electrolytic silver-plated finish, weighs approximately 0.57/0.72kg, and uses an FAMCS11.6-5*5 coupling. Accuracy grade N denotes the standard type, and wiring direction N denotes standard wiring. Full/Half step resolutions are 5μm/2.5μm, respectively, with a maximum full-step speed of 20mm/s. It is suitable for precision linear positioning and short-travel mechanisms in automated equipment.

FXS Series Precision Stages

FXS Series Precision Stages

FXS Series precision stages use a ball screw drive (8 mm screw outside diameter, 1 mm lead) and linear ball guides. Two platform sizes are available, 60×60 mm and 60×80 mm, with travel ranges of 20 mm, 30 mm, and 50 mm. The stage body is made of stainless steel with an electroless nickel finish and weighs approximately 0.8 kg. Suitable for precision positioning applications where size and weight are critical, these stages provide high-precision, short-travel feed for automated assembly, inspection, dispensing, and optical adjustment equipment. The standard connector is D-SUB, and the standard cable exit is not designated as left or right. Please specify separately if an HRS connector is required for the stage wiring. Consult the specification table for the relevant travel range to confirm the accuracy grade, resolution (Full/Half), maximum speed, unidirectional positioning accuracy, repeatability, load capacity, lost motion, parallelism, and straightness of travel.

FXN/FXC Series Electric Linear Stages

FXN/FXC Series Electric Linear Stages

FARAY standard electric single-axis stages (linear stages) combine recirculating ball linear guides with a ball screw drive unit. They are used in automated equipment for precision linear positioning, dispensing, screw fastening, inspection, material handling, and other applications. The model uses a six-character code: material S stands for stainless steel, drive unit B stands for ball screw, the precision grade is represented by one letter, wiring type N indicates standard wiring, motor type N indicates a two-phase stepper motor and X indicates no motor, and connector type D indicates a D-SUB15 (VGA) connector. There are two model types, FXN and FXC, with 50100 as a common size code (e.g., FXN50100-SBNN-ND and FXC50100-SBNN-ND). The stages have a compact design, and the travel, motor, and connector configurations can be selected to suit equipment requirements, making them suitable for a wide range of factory automation linear motion applications.

FXN/FXC Series Linear Stages

FXN/FXC Series Linear Stages

The FXN/FXC series comprises FARAY standard electric X-axis linear stages with recirculating ball guides and ball screw drives, designed for precise linear positioning in factory automation. Model numbers consist of a base model and codes for material, drive unit, accuracy grade, wiring type, motor type, and connector type: material S denotes stainless steel; drive B denotes a ball screw; accuracy N denotes standard grade; wiring N denotes standard wiring; motor options are N for a two-phase stepper motor or X for no motor; and connector D denotes D-SUB15 (VGA). Catalog examples include FXN50100-SBNN-ND and FXC50100-SBNN-ND.

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

The FARAY FX N/C 60-SBN series comprises standard motorized linear motion stages with a recirculating ball drive. The stage measures 60×60 mm and is 60 mm high. Its stainless steel body has a chrome-plated finish. Two configurations are available: type N (body weight approximately 1.8 kg) and type C (approximately 1.94 kg). The stage does not include a driver and requires an external motor and controller. Resolution is 10 µm/5 µm, with travel ranging from 30~300 mm. Common standard travel lengths are 150/200/250/300 mm; short-travel options include 30/50/75/100 mm, with travel increasing in 50 mm increments. Model numbers follow the format FX+N/C+60+travel-SBNN-ND-P2. Catalog photographs also show FXN60100-SBNN-ND and FXC60100-SBNN-ND. Applications include automated electronics assembly, inspection, dispensing, and small-scale precision positioning.

FYN/FYC Series Motorized XY Stages

FYN/FYC Series Motorized XY Stages

The FYN/FYC series consists of standard motorized XY stages with recirculating linear ball bearings. Made of stainless steel and driven by ball screws, they are suitable for precision two-axis positioning and reciprocating motion in automated equipment. The model code specifies the material, drive unit, accuracy grade, wiring configuration, motor type, and connector type. The examples on this page have a size code of 5075, standard accuracy, standard wiring, a choice of a two-phase stepper motor or no motor, and a D-SUB15 (VGA) connector. FYN and FYC denote different configurations and can be selected according to equipment space and drive requirements.

FYN/FYC Series Precision Stages

FYN/FYC Series Precision Stages

The FYN/FYC series comprises precision motorized stages with a 60×60mm platform. The stainless steel body is treated with electroless nickel plating, and the drive uses an 8mm outside diameter ball screw with a choice of P1(1mm) or P2(2mm) lead. The guide uses recirculating linear ball bearings, and a two-phase stepper motor is included as standard. A D-SUB15(VGA) connector is optional; the connecting cable (2m/4m, with loose wires at one end) and FAMCS11.6-5*5 driver are sold separately. Standard travel ranges are 30 / 50 / 75mm. Resolution (full step/half step) is 5/2.5µm(P1) and 10/5µm(P2), with maximum speeds of 20mm·s⁻¹(P1) and 40mm·s⁻¹(P2). Unidirectional positioning accuracy is 15µm, and repeatability is ±1µm. Body weight ranges from 2.2~2.88kg depending on travel; the FYC model weighs approximately 0.38kg more than the FYN with the same travel. Suitable for micron-level feed and positioning in precision measurement, optical adjustment, semiconductor, and automation equipment.

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

The FARAY FY N/C 80□-SBN series is a standard motorized XY-axis linear stage with recirculating ball bearings. It features an 80-size body and an 08 ball screw drive, with a choice of 1mm or 2mm lead. The stage uses linear recirculating ball guides and is made of stainless steel with an electrolytic nickel-plated finish. Standard travel is 30/50/75mm, with resolution of 5/2.5μm (1mm lead) or 10/5μm (2mm lead), maximum speed of 20/40mm/sec, unidirectional positioning accuracy of 15μm, and repeat positioning accuracy of ±1μm. The standard N-type body weighs approximately 3.0~3.68kg, while the C-type weighs approximately 3.58~4.06kg. It is suitable for automated equipment requiring precision linear positioning on two XY axes.

FR Series Motorized Linear Stages

FR Series Motorized Linear Stages

The FARAY FR Series motorized linear stages are precision linear modules driven by stepper motors. They are available in four platform sizes—FR39, FR59, FR80, and FR100—to cover light- to medium-load applications. Mechanical specifications include travel, drive mechanism, guide rail, stage material and surface treatment, body weight, resolution (pulses), maximum speed (full-step), unidirectional positioning accuracy, repeatability, load capacity, free play, parallelism, running concentricity, and running parallelism. Electrical specifications include driver brand/model, connectors, stage-side and controller-side connectors, travel home sensor, travel limit sensor, supply voltage, control output, and output control. The standard version operates on DC+24V, and the male connector pinout includes motor leads A/B, stage travel ORG1 output, and ground. These stages are suitable for precision positioning, handling, and inspection stations in automated equipment.

Standard Electric Linear Stage

Standard Electric Linear Stage

The FARAY standard electric linear stage is a single-axis linear motion actuator commonly used in factory automation. A servo or stepper motor drives a lead screw, moving the stage back and forth along a guide rail. The catalog discusses six-axis mounting applications, focusing on axial accuracy and travel. These stages can be used individually or combined into multi-axis configurations, such as six-axis Cartesian robots or positioning platforms. Axial accuracy and effective travel are the two key parameters to consider during selection. Models are configured using codes for stage specifications (cross-sectional dimensions and screw lead), travel length, motor and controller configuration, protective features, and mounting accessories. Users can select combinations to meet their load, speed, and repeatability requirements.

FX-A Series Electric Linear Stages

FX-A Series Electric Linear Stages

The FARAY FX-A series of standard electric linear stages is available in three sizes: 80, 100, and 120. This page provides electrical interface and wiring definitions. The male connector includes motor leads A/B, CWLS/CCWLS limit outputs, the stage travel origin output ORG1, the motor rotation origin output ORG2, a DC+24V power input, and ground. Unused pins are also listed. The series is suitable for automated equipment with an external drive/controller, and the pin definitions simplify motor, limit, origin, and power wiring and troubleshooting. For mechanical travel, lead, load capacity, and mounting dimensions, refer to the mechanical specifications for the relevant model.

FY-A Series Electric Linear Slides

FY-A Series Electric Linear Slides

The FY-A series electric linear slides are available in three sizes: 80, 100, and 120. This page focuses on the electrical specifications of the standard model, which uses a male connector, and provides pinout and wiring diagrams. The 16-pin interface includes motor leads A/B, CWLS and CCWLS limit outputs, a motor rotation ORG2 output, a slide travel ORG1 output, a DC+24V power input, DC 0V, and ground. Unused pins are clearly left unassigned. The wiring definitions cover power, motor drive, and limit/home signals between the host controller and the slide, facilitating machine wiring and motion control integration.

FARAY Standard Electric Linear Slide

FARAY Standard Electric Linear Slide

The FARAY standard electric linear slide is a single-axis linear motion actuator for factory automation. It operates on DC 24V and uses a 15-pin male connector for motor leads and signal connections. Wiring includes four A/B motor leads, CWLS/CCWLS forward and reverse limit outputs, an ORG1 slide travel origin output, an ORG2 motor rotation output, power inputs (DC+24V / DC 0V), and ground. A PLC or motion controller can be connected for position feedback and limit protection. The slide supports two-phase and five-phase stepper motors from Taiwanese and Japanese manufacturers, including Oriental Motor and SANYO, classified into mounting groups A/B/C/D. Motors have a rated current of approximately 0.67~2.3A, a step angle of 1.8°/0.72°, and a maximum energized holding torque of 0.06~0.58 N·m. Optional drivers include GTR22G-D, GTR24M3, and CVRD518-K. It is suitable for automated applications requiring precise reciprocating positioning, such as electronics assembly, dispensing, material handling, and inspection.

FAG Series Electric Slides

FAG Series Electric Slides

The FAG series is a standard electric slide range from FARAY AUTOMATION. This page defines the electrical specifications for the series. The slide uses a 15-pin male connector: Pins 1–4 are the A/A/B/B two-phase motor winding leads, Pin 6 is the CWLS (clockwise limit) output, Pin 7 is the CCWLS (counterclockwise limit) output, Pin 9 is the DC+24V power input, Pin 10 is the ORG1 slide travel origin output, Pin 11 is DC 0V, and Pin 12 is ground. Pins 5, 8, and 13–15 are unused. The timing diagram shows the operating relationships among the slide travel slot block, CW/CCW limits, origin sensor, hardware limits, and motor, and is used to wire the host controller for homing and limit protection. When selecting and wiring the slide, check the pin assignments against the wiring diagram to avoid reversing the power and signal connections. All travel lengths in the series share the same electrical specifications.

XY Multi-Axis Linear Stage Assemblies

XY Multi-Axis Linear Stage Assemblies

XY multi-axis linear stage assemblies combine two or more linear stages in different spatial orientations to create a motion platform capable of two-dimensional movement along the X and Y axes, or three-dimensional movement with the addition of a Z axis. This series is categorized by configuration rather than by individual model. Options include an XY dual-Z-axis assembly with an aluminum support frame, a single-rail dual-carriage assembly, two-dimensional XY 中-shaped and side-mounted 中-shaped assemblies, two-dimensional 千-shaped and side-mounted 千-shaped assemblies, side-mounted, dual-carriage and horizontal 工-shaped assemblies, and two-dimensional 井-shaped and dual-carriage 井-shaped assemblies. Depending on travel, load direction, installation space and accuracy requirements, users can select a single-rail dual-carriage configuration for greater resistance to overturning, or a symmetrical 工-shaped or 井-shaped configuration to distribute off-center loads. These assemblies are commonly used for handling, positioning, dispensing and screw fastening in custom automation equipment. They can be paired with stepper motors, servo motors and various controllers, with cross-sectional dimensions and travel customized to the application.

PCH Series Two-Axis Linear Modules

PCH Series Two-Axis Linear Modules

The PCH series consists of two-axis (X-Y) linear modules with a cross-slide structure, combining an X axis and a Y axis. Driven by ball screws and AC servo motors, they are suitable for two-dimensional positioning, material handling, dispensing, and inspection in automated equipment. The X-axis model is PCH14 and the Y-axis model is PCH13. Both axes have a positioning repeatability of ±0.01 mm, a ball screw lead of 20 mm, and a maximum speed of 1000 mm/s. Stroke lengths are available in 50 mm increments: the standard stroke range is 100~1050 mm for the X axis (PCH14) and 50~650 mm for the Y axis (PCH13). The corresponding AC servo motor ratings are 400 W for the X axis and 200 W for the Y axis. Operating conditions are 0~40 °C and below 85%RH. Users can select strokes in 50 mm increments within each axis's range and freely combine X and Y axes to create two-axis modules in different configurations.

FLY80 Series Linear Actuators

The FLY80 series consists of 80-frame linear actuators/electric cylinders with three motor mounting orientations: C (center), L (left), and R (right). An optional brake is available, indicated by the model suffix B. The compact design is suitable for linear motion applications in automated equipment, including pushing, pulling, lifting, and positioning. Refer to the corresponding dimensional drawings for stroke, thrust, speed, and other specifications.

FXS80 Series Linear Stage

FXS80 Series Linear Stage

The FXS80 series is a standard electric linear stage with linear ball guides and a ball screw drive. It has an 80 mm table width and is available with 20, 30, or 50 mm travel. The model designation consists of codes for material, drive unit, precision grade, cable outlet, motor type, and connector type: material S means stainless steel; drive unit B means ball screw; precision grade N means standard; cable outlet N means standard wiring; motor type N means a two-phase stepper motor and X means no motor; connector type D means D-SUB15 (VGA). It is suitable for precision linear positioning and handling mechanisms in factory automation.

FYS50□-SBN Series Motorized XY Linear Stages with Linear Ball Guides

FYS50□-SBN Series Motorized XY Linear Stages with Linear Ball Guides

The FYS50□-SBN series consists of standard motorized XY linear stages with linear ball guides. Made of stainless steel, they feature ball screw drives, two-phase stepper motors, standard wiring, and D-SUB15 (VGA) connectors. The catalog lists two models, FYS5020-SBNN-ND and FYS5030-SBNN-ND, for automated systems requiring two-axis XY positioning. Some electrical and accuracy specifications on the page were duplicated or corrupted by OCR and have been excluded from the structured specifications.

FYS60 Series Precision Motorized Stages

FYS60 Series Precision Motorized Stages

The FYS60 series consists of precision motorized stages with a 60×60 mm table, a φ8 mm ball screw (1 mm lead), and linear ball guides. They use a 2-phase stepper motor (□28, dual shaft, sold separately). Standard models offer 20/30/50 mm travel, while the catalog dimension table also covers travel lengths of 30~200 mm. Accuracy grade N is the standard grade, with ±1 μm repeatability, 15 μm unidirectional positioning accuracy, 15 μm parallelism, 3 μm running straightness, 3 μm backlash, 5/2.5 μm resolution, a maximum speed of 20 mm/s, and a 6 kgf load capacity. The stage body is stainless steel with electroless nickel plating. A D-SUB connector is standard; HRS cabling and an EE-SX4134 photoelectric sensor are optional.

FYS80 Series Precision Motorized Linear Stage

FYS80 Series Precision Motorized Linear Stage

The FYS80 series from FARAY AUTOMATION is a precision motorized linear stage/linear module made of stainless steel, with a ball screw drive and a two-phase stepper motor. It is suitable for applications requiring precise positioning in electronics, semiconductors, inspection and other fields. The series has an 80mm table and is available in three travel lengths: 20mm, 30mm and 50mm. Overall lengths are 151mm, 161mm and 194mm respectively, with corresponding L1 dimensions of 58.5mm, 68.5mm and 101.5mm. The model code is FYS80□-SBNN-ND: in the material section, S=stainless steel; in the drive section, B=ball screw. These are followed by the precision grade and cable exit type (N=standard cable exit). After the hyphen are the motor type (N=two-phase stepper, X=not configured) and connector type (D=D-SUB15/VGA). Compact, accurate and smooth-running, the product is an economical solution for small precision linear motion systems.

LBALH4015 Integrated Electric Slide

LBALH4015 Integrated Electric Slide

The LBALH4015 integrated electric slide combines the drive motor and slide body in a single electric actuator. It is suitable for linear pushing, lifting, rotation, and angular oscillation in factory automation. The catalog lists several coded options: drive mounting position can be center drive (C), left-side drive (L), or right-side drive (R); body material can be stainless steel (S) or aluminum alloy (A); motion type can be linear sliding (L), Z-axis lifting (Z), rotation (R), or angular oscillation (A); drive type is electric or automatic (A). Confirm specific dimensions, travel, load capacity, speed, and accuracy against the manufacturer's technical data sheet.

LF-MSEC35 Series Electric Slide

The LF-MSEC35 series electric slide with force control is a linear actuator that integrates a servo motor, screw drive, built-in controller and force sensor. It has a 4mm screw lead, a rated thrust of 40N, a minimum thrust of 10N, a maximum speed of 200mm/s, a rated speed of 100mm/s, a maximum acceleration of 3000mm/s² and a positioning repeatability of ±0.01mm. The maximum horizontal load is 2kg and the maximum vertical load is 1kg. Allowable load moments are 9.9N·m for Mx/My and 3.3N·m for Mz. The power supply is DC 24V±10%, with a rated current of 0.3A for the standard version and 2A for the version with a brake. It has an IP40 protection rating and is recommended for use at 0-55℃ and below 85%RH. The slide has built-in control, with external control also available, and communicates via Modbus RTU(RS485). An optional 0-100/200N (±0.05%FS) force sensor is available. It comes in a standard version (DR-DB, without brake) and a version with a brake (DR-BB), with total strokes of 30/50/75/100mm, for precision force control and vertical positioning applications.

XYS430-A Two-Axis Linear Module

XYS430-A Two-Axis Linear Module

The XYS430-A is a two-axis (XY) linear module driven by a ball screw. It uses a PCH12 axis for the X-axis and a PCH10 axis for the Y-axis. Its compact design is suitable for precision positioning in a plane. It offers a repeatability of ±0.01 mm, a ball screw lead of 20 mm and a maximum speed of 1000 mm/s, and is equipped with a 100 W AC servo motor. Standard travel ranges from 100~1050 mm for the X-axis and 50~550 mm for the Y-axis, both in 50 mm increments. The operating environment is 0~40°C and below 85%RH. It can be paired with a servo drive for multipoint positioning and is widely used for XY planar positioning in handling, dispensing, assembly and inspection applications in the electronics, semiconductor and automotive parts industries.

XYS430-A1 Series XY Linear Modules

XYS430-A1 Series XY Linear Modules

The XYS430-A1 is a precision linear module with a dual-axis (XY) configuration, an aluminum extrusion body, and built-in XY cable chains. It is suitable for automated applications requiring two-dimensional positioning, such as electronics assembly, inspection, and dispensing. Standard X-axis travel ranges from 100~1050 mm in 50 mm increments. Overall length L varies linearly with travel (L = travel + 380 mm), while the number of mounting holes M and hole diameter N increase in stages as travel increases (M from 0 to 5 and N from 6 mm to 16 mm). The catalog specifies a maximum operating speed of 1000 mm/min. The table has 4-M5×15 threaded mounting holes and a 2.5×15 locating slot. Key overall dimensions are 90/100/105/130/138/143 mm. When selecting a model, consult the table for L, A, M, N, and the corresponding maximum speed based on the required travel.