Precision Motorized Linear Stages

FXS Series Precision Stages

FXS Series Precision Stages

FXS Series precision stages use a ball screw drive (8 mm screw outside diameter, 1 mm lead) and linear ball guides. Two platform sizes are available, 60×60 mm and 60×80 mm, with travel ranges of 20 mm, 30 mm, and 50 mm. The stage body is made of stainless steel with an electroless nickel finish and weighs approximately 0.8 kg. Suitable for precision positioning applications where size and weight are critical, these stages provide high-precision, short-travel feed for automated assembly, inspection, dispensing, and optical adjustment equipment. The standard connector is D-SUB, and the standard cable exit is not designated as left or right. Please specify separately if an HRS connector is required for the stage wiring. Consult the specification table for the relevant travel range to confirm the accuracy grade, resolution (Full/Half), maximum speed, unidirectional positioning accuracy, repeatability, load capacity, lost motion, parallelism, and straightness of travel.

FYN/FYC Series Precision Stages

FYN/FYC Series Precision Stages

The FYN/FYC series comprises precision motorized stages with a 60×60mm platform. The stainless steel body is treated with electroless nickel plating, and the drive uses an 8mm outside diameter ball screw with a choice of P1(1mm) or P2(2mm) lead. The guide uses recirculating linear ball bearings, and a two-phase stepper motor is included as standard. A D-SUB15(VGA) connector is optional; the connecting cable (2m/4m, with loose wires at one end) and FAMCS11.6-5*5 driver are sold separately. Standard travel ranges are 30 / 50 / 75mm. Resolution (full step/half step) is 5/2.5µm(P1) and 10/5µm(P2), with maximum speeds of 20mm·s⁻¹(P1) and 40mm·s⁻¹(P2). Unidirectional positioning accuracy is 15µm, and repeatability is ±1µm. Body weight ranges from 2.2~2.88kg depending on travel; the FYC model weighs approximately 0.38kg more than the FYN with the same travel. Suitable for micron-level feed and positioning in precision measurement, optical adjustment, semiconductor, and automation equipment.

FYS60 Series Precision Motorized Stages

FYS60 Series Precision Motorized Stages

The FYS60 series consists of precision motorized stages with a 60×60 mm table, a φ8 mm ball screw (1 mm lead), and linear ball guides. They use a 2-phase stepper motor (□28, dual shaft, sold separately). Standard models offer 20/30/50 mm travel, while the catalog dimension table also covers travel lengths of 30~200 mm. Accuracy grade N is the standard grade, with ±1 μm repeatability, 15 μm unidirectional positioning accuracy, 15 μm parallelism, 3 μm running straightness, 3 μm backlash, 5/2.5 μm resolution, a maximum speed of 20 mm/s, and a 6 kgf load capacity. The stage body is stainless steel with electroless nickel plating. A D-SUB connector is standard; HRS cabling and an EE-SX4134 photoelectric sensor are optional.

FYS80 Series Precision Motorized Linear Stage

FYS80 Series Precision Motorized Linear Stage

The FYS80 series from FARAY AUTOMATION is a precision motorized linear stage/linear module made of stainless steel, with a ball screw drive and a two-phase stepper motor. It is suitable for applications requiring precise positioning in electronics, semiconductors, inspection and other fields. The series has an 80mm table and is available in three travel lengths: 20mm, 30mm and 50mm. Overall lengths are 151mm, 161mm and 194mm respectively, with corresponding L1 dimensions of 58.5mm, 68.5mm and 101.5mm. The model code is FYS80□-SBNN-ND: in the material section, S=stainless steel; in the drive section, B=ball screw. These are followed by the precision grade and cable exit type (N=standard cable exit). After the hyphen are the motor type (N=two-phase stepper, X=not configured) and connector type (D=D-SUB15/VGA). Compact, accurate and smooth-running, the product is an economical solution for small precision linear motion systems.