Cable Carrier

Series 15
Series 15 cable drag chains are plastic cable carriers used for cable protection in factory automation. They are available as a semi-enclosed, non-opening type (WSL09) and an easy-to-press, externally opening type (WSL10). Made of PA6+G3F3, they are black and suitable for temperatures from -20°C to 120°C. The pitch is 22 mm, with 46 links per meter. Inner width options: fixed at 15 mm for WSL09, or 15/20/30 mm for WSL10. Inner height options: 15/20 mm. Available bend radii: R28/R38/R48. Styles: non-opening (B) and externally opening (W). Special connectors are supplied and sold as complete sets. Suitable for cables with a diameter of up to 13 mm. When ordering, specify the connector model and length (in meters or number of links).

Series 18
Series 18 easy-open plastic cable carriers are available in two configurations: pin-connected, outward-opening and semi-enclosed, inward-opening. The body is made of PA6+GF30 and is black, with an operating temperature range of -20°C to 120°C. Designed to protect and guide cables in industrial automation equipment, these carriers feature a push-to-open design for quick, easy maintenance. The pin-connected, outward-opening model is suitable for external installation, while the semi-enclosed, inward-opening model is intended for internal installation and comes with fixed connectors. The semi-enclosed, inward-opening model (WSL14F) is available with several internal heights (18/28/38/48 mm) and bend radii (25/28/38/48 mm, among others) to suit different cable-routing requirements. When ordering, specify the length (in meters or number of links) and connector model.

30 Series Bridge-Type Cable Carrier
This series of 30 Series bridge-type cable carriers includes two styles: inner-opening (WSL21N) and outer-opening (WSL21W). Made of reinforced nylon PA6+GF30, the carriers are black and rated for temperatures from -20°C to 120°C. The inner width is 30 mm, the outer height is 40 mm, and the outer width is 54 mm. Choose from bend radii of R38 or R55. The number of links per meter depends on the pitch. Cable carrier connectors are sold as a complete set (moving end + fixed end). Suitable for protecting cables on automation equipment.

30 Series Cable Carriers
30 Series cable carriers are engineering-plastic cable protection chains available in three types: all-black open, all-black enclosed, and quiet enclosed. Made from PA6+GF30 (or PA6+GFR30), they have a black finish and an operating temperature range of -20°C to 120°C. Lightweight, with a short pitch, they offer wear and corrosion resistance and quiet operation, making them suitable for fast cable routing in high-speed applications. Links per meter = 1000 ÷ pitch. Cable carrier end brackets are sold as a set (moving end + fixed end). A range of inner widths, bend radii, and styles is available to suit different applications.

35 Series
35 Series low-noise bridge-type cable carrier, made of PA6+GF30, black, and suitable for temperatures from -20°C to 120°C. The carrier opens on both sides for quick, easy cable routing. Its short pitch and light weight help reduce operating noise (depending on speed). It offers excellent wear and corrosion resistance, making it especially suitable for high-speed applications. The number of links per meter is calculated based on the pitch. Cable carrier connectors are sold as a complete set, including the moving-end and fixed-end connectors. Example order: WSL06J-35-50-R75L + length (in meters or number of links) + connector model.

55 Series Multicolor Bridge-Type Cable Carrier, Open on Both Sides
55 Series multicolor bridge-type cable carrier with openings on both sides, made of PA6+GFR30 in black. Operating temperature range: -20°C to 120°C. Pitch: 71.4 mm; 14 links per meter; load capacity: 2.2 kg/m. Chain length formula: chain length = S/2 + K, where S is the travel distance and K = π × R + safety allowance. Actual installation height H1 = H + 75 mm. Compatible with fixed connectors; inner height: 55 mm; inner width range: 50–200 mm. Available bend radii: R100–R400. Connector model: WSL34 Series. Designed to protect cables in industrial automation applications and available in multiple sizes.

WWC Series Cleanroom Cable Carrier
The WWC Series Cleanroom Cable Carrier is designed for factory automation environments and is suitable for cleanrooms and other applications requiring low dust and particle levels. Its flexible design, combined with internal horizontal and vertical dividers or an integrated cable separator, keeps cables and tubing neatly arranged while reducing friction and tangling. A range of bend radii (R70, R100, R130) and internal dimensions (35×65, 40×85) is available to meet different load and travel requirements. An optional heavy-duty support frame system accommodates extra-long unsupported spans of up to 1,800 mm. The newly patented design resists tension and prevents separation, with a service life of at least 20 million cycles. Operating temperature: 30±5°C. Special specifications, including antistatic and flame-retardant options, are available on request.

WSL Series
The WSL Series is a range of cable carriers commonly used in factory automation, available in several types, including bridge, enclosed, and low-noise designs. These products protect cables and hoses while guiding them on moving equipment. They offer quick cable installation, a small pitch, low weight, low operating noise (depending on speed), and resistance to wear and corrosion, making them suitable for high-speed applications. Specifications include inner width B1 (7–300 mm), bend radius R (15–200 mm), outer height H2 (10–76 mm), outer width B2 (12–228 mm), and style (non-open B, outside-opening W, or opening on both sides L). The material is PA6+GF30, the color is black, and the operating temperature range is −20°C to 120°C. Subseries include WSL02, WSL07, WSL31, WSL32, WSL04J, WSL06JII, WSL07J, WSL08J, and WSL09J, each offering different combinations of inner width and bend radius. When ordering, specify the model, inner width, bend radius, and style, as well as the length and connector model.

Steel-Reinforced Cable Carrier, Size 45, Bridge Series
This series of steel-reinforced cable carriers is designed for long travel without sagging. With an inner width of 45 mm, it is suitable for applications requiring high stability and long travel distances. Available in bridge-style (WSLG45Q) and F-style (WSLG45F) designs, with bend radii ranging from 50 mm to 200 mm (some radii are available with different connector models). The outer heights are 77 mm (WSLG45Q) and 67 mm (WSLG45F), respectively; the outer width varies with the bend radius. Connector type C is a common configuration, and multiple mounting dimensions are supported. These carriers are widely used to protect cables in automation equipment, CNC machine tools, robots, and other applications.

WSL01 Series Cable Drag Chain
The WSL01 series consists of miniature bridge-type, non-openable cable carriers made of black PA6+GF30, with an allowable temperature range of 20°C to 120°C. The number of links per meter is calculated from the pitch. Cable carrier connectors are sold as a complete set (moving end + fixed end). Models include WSL01, WSL01-5-5C, and WSL01-5-7C. They have an inner width of 5 mm and are available with bend radii of R10, R15, and R18. Style B (non-openable).

WSL01J Series Bridge-Type Cable Carrier
The WSL01J Series Bridge-Type Cable Carrier is an open-sided plastic cable carrier made from engineering plastic (PA6+GF30) and finished in black. It is suitable for high-speed applications. Features include quick and easy cable routing, a short pitch, low weight, low operating noise (depending on operating speed), wear resistance, and corrosion resistance. The series has an inner width of 18 mm and an outer height of 24.5 mm. Available bend radii are 25, 35, 37, 40, 45, and 50 mm. The outer width varies with the bend radius: 37 mm for a 25 mm radius and 45 mm for all other radii. The hole diameter is 4 mm, and the operating temperature range is -20°C to 120°C. Cable carrier connectors are sold as a complete set (moving end + fixed end). Links per meter = 1000 ÷ pitch. Widely used to protect cables in automation equipment, CNC machine tools, robots, and other applications.

WSL02J Low-Noise Bridge-Type Cable Carrier, Open on Both Sides
Series 25 low-noise bridge-type cable carrier, open on both sides, model WSL02J, with a 25 mm inner width. Made of PA6+GF30 and finished in black. Suitable for temperatures from -20°C to 120°C, it features quick cable installation, a short pitch, low weight, quiet operation, and resistance to wear and corrosion, making it ideal for high-speed applications. Fixed end connectors are available for various bend radii (25–110 mm). The suffix C in the connector model indicates the fixed end. To order, specify WSL02J-25-bend radius L + length + connector model.

WSL03 Series Cable Drag Chain
The WSL03 series miniature bridge-type drag chain is available in two styles: easy-open (WSL03F) and non-openable (WSL03). Made of PA6+GF30, it is black and rated for operating temperatures from -20°C to 120°C. The inner width B1 is 10 mm, with bend radii of R18 and R38 available. The pitch P is 14.8 mm for the easy-open style and 16 mm for the non-openable style. Links per meter = 1000 ÷ pitch. Drag chain connectors are sold as a complete set (moving end + fixed end). When ordering, specify the full model number, length (in meters or number of links), and connector model.

WSL03B Series
The WSL03B series is a compact cable carrier with an inner width of 10 mm and an outer width of 15.2 mm. It is available with bend radii of 15 mm or 20 mm, in R18, R28, and R38 styles. A variety of mounting connector types are available, including A, V, B, and C. The series is designed to protect and guide cables and hoses in automation equipment. Its compact construction, smooth operation, and flexible bending help reduce cable wear and extend service life.

WSL03F Miniature Bridge-Type Easy-Open Cable Carrier
The WSL03F series is a Series 10 miniature bridge-type easy-open cable carrier made of black PA6+GF30 reinforced nylon. It operates at temperatures from -20°C to 120°C. It has an inner width of 10 mm, an outer height of 13.5 mm, an outer width of 12.6 mm, and a pitch of 14.8 mm. The bend radius is available in 6 mm or R18. The matching connector model is WSL03F-10-6C. Connectors are sold as a complete set (moving end + fixed end). There are approximately 68 links per meter. Suitable for protecting moving cables in automation equipment, machine tools, robots, and similar applications, it is lightweight and easy to install. When ordering, use the coding format WSL03F-inner width-bend radius-style B + length + connector model.

WSL05 Series Semi-Enclosed Cable Carrier
The WSL05 series is a semi-enclosed cable carrier with a non-openable design (Type B), suitable for protecting and guiding cables and conduits in automation equipment. It has an inner width of 10 mm and a bend radius of 15 mm; the model is R28 (possibly a variant with a 28 mm bend radius). Cable carrier connectors are sold as a complete set (moving end + fixed end). When ordering, specify the length (in meters or number of links) and connector model. The material is believed to be PA6+GF30 (glass-fiber-reinforced nylon); the color is black, and the operating temperature range is -20°C to 120°C (similar to the WSL06 series). The pitch is not specified, but the number of links per meter can be calculated as 1000 ÷ pitch.

WSL06 Series Cable Carrier
The WSL06 Series is a Series 10 press-fit, bridge-type, pull-open cable carrier with an externally opening design. It is made of PA6+GF30 in black and has an allowable operating temperature range of -20°C to 120°C. The pitch is 16.7 mm, with 60 links per meter. Calculate the chain length using S/2+K, where S is the travel distance and K=π×R+safety allowance. The actual installed height is H1=H+14.5 mm (at a load of 0.2 kg/m). Available options include inner heights of 11 mm, 15 mm, and 20 mm, and bend radii of R18, R28, and R38. Connectors are sold as complete sets (moving end + fixed end).

WSL07 Series Cable Drag Chain
The WSL07 Series is a size 15 bridge-type cable drag chain made of PA6+GF30 in black, with an operating temperature range of -20°C to 120°C. It is available in two styles: inner-opening (WSL07N) and non-opening (WSL07B). Choose from several internal widths (15 mm, 20 mm, 25 mm, and 50 mm) with a bend radius of R28. Fixed connectors are available. Suitable for cable protection on machine tools, automation equipment, and similar applications.

WSL08 Series Cable Drag Chain
The WSL08 series is a semi-enclosed drag chain with an inward-opening (side-opening) design, suitable for protecting and guiding cables and hoses in factory automation. It has an internal width of 15 mm, an internal height of 15 mm, a pitch of 22 mm, and 46 links per meter. The chain length is calculated using S/2+K (where S is the travel distance and K=π×R+ a safety allowance). The actual installed height HF=H+20 mm (at a load of 0.3 kg/m). Drag-chain connectors are sold as a complete set (moving end + fixed end); see the catalog table for fixed-end connector types and specifications. Available bend radii are R28, R38, and R48. The style is CK (side-opening). The external height is 19.4 mm, the external width is 23 mm, and P is 26 mm.

WSL10 Push-to-Open Cable Carrier
This series features an easy-to-open, externally opening cable carrier. It has an inside height of 15 mm, selectable inside widths of 15/20/30 mm, and bend radii of R28/R38/R48. Made of black PA6+G3F3, it operates at temperatures from -20°C to 120°C and is suitable for cables up to 13 mm in diameter. The pitch is 22 mm, with 46 links per meter. Matching connectors are sold as a set (moving end + fixed end). When ordering, specify the model, length (in meters or number of links), and connector model.

WSL10F Series
The WSL10F series is a Series 15 easy-open cable carrier with a semi-enclosed, inward-opening design. Made of PA6+GFR30, it is black and has an allowable temperature range of -20°C to 120°C. The number of links per meter depends on the pitch. Matching connectors (moving end + fixed end) are sold as a complete set. Available in a range of internal widths and bend radii, it is suitable for cable protection in automation equipment.

WSL10J Silent Bridge-Type Cable Carrier, Open on Both Sides
The WSL10J series is a 45-series silent bridge-type cable carrier with an open-on-both-sides design, suitable for high-speed cable routing. It has an inner height of 45 mm; the inner width varies by model, and bend radii from R75 to R200 are available. Made of PA6+G30, it is black and suitable for temperatures from -20°C to 120°C. Features include quick cable installation, a short pitch, low weight, quiet operation, and resistance to wear and corrosion. Multiple combinations of inner height and bend radius are available. Links per meter = 1000 ÷ pitch. Cable carrier connectors are sold as a complete set.

WSL11J Series Cable Drag Chain
The WSL11J series is a 45-series silent enclosed drag chain with openings on both sides for quick, easy cable routing. It features a short pitch, low weight, low operating noise (depending on operating speed), and resistance to wear and corrosion, making it suitable for high-speed applications. Made of PA6+G30, it is black and rated for temperatures from -20°C to 120°C. Connectors are included. Key dimensions: inner height 45 mm, inner width 100 mm, bend radius R75 mm, outer height 58.1 mm, and outer width 125 mm.

WSL11X Series Semi-Enclosed Cable Carrier, Inner-Opening
The WSL11X series inner-opening, semi-enclosed cable carrier is part of the Series 18 product range. Its semi-enclosed design allows cables to be loaded from the inner radius side, making installation and maintenance easier. Key specifications include inner widths of 18 mm and 50 mm and inner heights of 18 mm, 25 mm, 37 mm, and 50 mm. Available bend radii are R28 mm, R38 mm, and R48 mm, or the inner-opening style N. The outer height is 23.4 mm across the range, while the outer width varies with the inner width (27.8 mm–46.8 mm). Fixed connector types are available in X1 and X2. The cable carrier is suitable for machine tools, automation equipment, and other applications where cables need protection. When ordering, provide the full model code (for example, WSL11X-18-18C-A) and the required length. Length is typically specified in 1 m increments or by link count.

WSL12 Bridge Cable Carrier, Non-Openable
The WSL12 series bridge-style cable carrier has a non-openable design and is made of black PA6+GF30. Operating temperature: -20°C to 120°C. It protects cables up to 16 mm in diameter. The pitch is 31.1 mm, with 33 links per meter. Installed height: H1 = H + 23 mm (at a load of 0.5 kg/m). The inner width is 18 mm, and the inner height is available in 25 mm and 37 mm. Choose from bend radii R28, R38, and R48. Style B is non-openable. Connector type: A. When ordering, specify the length (in meters or number of links) and connector type.

WSL13 Bridge Cable Carrier
This 18-series bridge-type cable carrier is available in two styles: externally opening (WSL13) and internally opening (WSL13N). It is suitable for cables with a diameter of less than 16 mm. The inner width is 18 mm, the inner height is 20 mm, and the pitch is 35 mm, with approximately 29 links per meter. Multiple bend radii are available, including R28, R38, and R48. The chain length is calculated using S/2+K, where S is the travel distance and K=πr+ a safety allowance. The actual installation height is H1+H+23.5 mm (at a load of 0.5 kg/m). Cable carrier connectors are sold as a complete set (moving end + fixed end). Made of engineering plastic, they are lightweight and wear-resistant, and are widely used to protect cables in automation equipment.

WSL13N Series Cable Drag Chain
The WSL13N series is an inward-opening bridge-type drag chain in the 18 series. It has an inner width of 18 mm, an inner height of 20 mm, a pitch of 35 mm, and 29 links per meter. It is suitable for cables with a diameter of less than 16 mm. Drag chain connectors are sold as a complete set, including moving-end and fixed-end connectors. Bend radii are R28, R38, and R48 (corresponding to connector models 20C, 25C, and 37C), plus an outward-opening style (model 50C). The installation height is H1+H+23.5 mm (with a load of 0.5 kg/m). Chain length calculation: S/2+K, where S is the travel distance and K=πr+R×safety allowance.

WSL16 Series Cable Drag Chain
The WSL16 series bridge-type cable drag chain is made of engineering plastic and protects and guides cables with diameters under 19 mm. It is available in three styles to suit different installation spaces: side-opening (L type), inner-opening (N type), and outer-opening (W type). The pitch is 46 mm, with 22 links per meter. Calculate the chain length using S/2 + K, where S is the travel and K = π × R + allowance. The actual installed height is H₁ = H + 35 mm (at a load of 0.5 kg/m). The standard WSL16 has an inner width of 20 mm, an outer height of 35 mm, and a selectable bend radius of 25–65 mm. The WSL16XN-21 subseries has an inner width of 15–50 mm, an outer height of 28.2 mm, and a bend radius of 28–75 mm. The WSL16XW-21 has an inner width of 15–50 mm, an outer height of 27.5 mm, and a bend radius of 28–55 mm. Cable chain connectors are sold as a complete set (moving end + fixed end). For fixed-end connector specifications, see the catalog.

WSL17 Series Bridge-Type Cable Carrier (Open on Both Sides)
The WSL17 series is a size 25 bridge-type cable carrier with an open design on both sides. It protects and guides moving cables and hoses on machine tools, automation equipment, and similar applications. The links are made of black PA6+GF30 nylon and operate at temperatures from -20°C to 120°C. The inner width is fixed at 25 mm, with several bend radii available (25/38/46/50/57/77/103 mm) to suit different installation spaces. The number of links per meter is calculated from the pitch (1000 ÷ pitch). Cable carrier connectors are sold as a set (moving end + fixed end) and must be selected separately. When ordering, specify the model, length (in meters or number of links), and connector model, for example, WSL17-25-25-R40L. Suitable for medium-load applications, the product offers good wear and corrosion resistance.

WSL17W Bridge-Type Cable Carrier, Outside-Opening
The WSL17W series bridge-type cable carrier features an outside-opening design and is made of black PA6+GF30. Operating temperature: -20°C to 120°C. Inner height: 25 mm; inner width: 25 mm. Available bend radii: 25 mm, 33 mm, 50 mm, 57 mm, 77 mm, and 103 mm. Pitch: 46 mm; 22 links per meter. Suitable for cables up to 22 mm in diameter. Cable carrier end brackets are sold as a complete set (moving end + fixed end).

WSL18 Series Cable Drag Chain
The WSL18 is a Series 25 enclosed cable carrier with openings on both sides for easy cable installation and maintenance. It is made of PA6+GF30 (nylon 6 with 30% glass fiber), is black, and has an operating temperature range of -20°C to 120°C. It protects cables with diameters under 22 mm from bending and is commonly used with connectors. The carrier pitch is not specified, but is typically the same as that of other models in the series.

WSL19 Series Cable Drag Chain
WSL19 Series multicolor bridge-type drag chain with openings on both sides, made of PA6+GF30 and finished in black. Suitable for ambient temperatures from -20°C to 120°C. The number of chain links per meter is calculated from the pitch. Connectors are sold as a set (including moving and fixed ends). An alternative hole spacing of B=B1+12 is available. This compact series is wear- and heat-resistant and is widely used to protect cables in automated equipment.

WSL22 Series Multicolor Bridge-Type Cable Carrier
The WSL22 Series is a size 30 multicolor bridge-type cable carrier with an inner width of 30 mm. Its open-sided design allows cables to be installed quickly. Made from engineering-grade plastic, it is wear-resistant, corrosion-resistant, and UV-resistant. Multiple bend radii are available (25 mm / 38 mm / 50 mm / 57 mm / 75 mm / 77 mm / 100 mm / 103 mm) to suit different space requirements. The fixed connector features a C-shaped design for secure, convenient installation. The outer height is 45 mm; the outer width varies with the bend radius, and the hole diameter is 18 mm. Operating temperature range: -40°C to 80°C. Suitable for industrial applications such as machine tools, robots, and automated production lines.

WSL23 Bridge-Type Cable Carrier, Open on Both Sides
The WSL23 series bridge-type cable carrier is suitable for cables with a diameter of 32 mm or less. It is made of PA6+GF30, is black, and operates at temperatures from -20°C to 120°C. The pitch is 63 mm, with 16 links per meter. The inner width is 35 mm. Available bending radii are 50, 60, 75, 90, 100, 125, 130, 150, 200, 250, and 300 mm. Cable carrier connectors are sold as a complete set (moving end + fixed end). The actual installation height is H1 = H + 55.4 mm (at a load of 1 kg/m). Chain length calculation: L = S/2 + K, where K = π × R + safety allowance. Fixed connector types are available, and hole spacing can be customized.

WSL25 Series Multicolor Bridge-Type Cable Carrier
The WSL25 series is a multicolor bridge-type cable carrier in the 35 series. Both sides can be opened. It has an inner height of 35 mm, an outer height of 73 mm, an outer width of 83 mm, and an aperture of 66 mm. It is available in 12 specifications with bend radii ranging from 50 to 300 mm. The style is R60 and it comes with fixed connectors. Suitable for protecting cables on CNC machine tools, automated equipment, and more. Custom lengths are available on request.

WSL26 Multicolor Enclosed Cable Carrier
The WSL26 is a multicolor enclosed cable carrier in the 35 Series. Its side-opening design makes it easy to install and maintain the cables and tubing inside. Made from PA6+GF30 (nylon 6 with 30% glass fiber), it is black and offers excellent mechanical strength and wear resistance. With an operating temperature range of -20°C to 120°C, it is suitable for most industrial automation environments. Accessories include dedicated connectors for secure mounting and connection. The series has an interior height of 35 mm, and the bend radius can be selected to suit your needs (refer to the 50–300 mm bend-radius range of the WSL25 in the same series). It is ideal for guiding and protecting moving cables in confined spaces.

WSL27 Series Bridge-Type Cable Carrier
The WSL27 Series Bridge-Type Cable Carrier features an open design on both sides for easy cable routing. It is made of PA6+GF30 (nylon 6 reinforced with 30% glass fiber), is black, and has an operating temperature range of -20°C to 120°C. Suitable for machine tools, automation equipment, and other applications requiring cable and hose protection. The number of links per meter depends on the pitch (pitch not specified). Cable carrier connectors are sold as a complete set (moving end + fixed end).

WSL28 Series Cable Carrier
WSL28 series bridge-type cable carrier with a 45 mm inner width and opening on both sides. Made of PA6+GF30 in black, it operates at temperatures from -20°C to 120°C. Available with a range of bend radii from 50 mm to 200 mm and supplied with dedicated connectors, it protects moving cables and hoses in automated equipment.

WSL29 Series
The WSL29 Series colorful open-type cable carrier belongs to the 45 Series. It has an inner width of 45 mm, an inner height of 50 mm, an outer height of 65 mm, and an outer width of 66 mm. Available bend radii are R75, R100, R125, R200, R250, and R315 mm. The carrier opens on both sides and is made of reinforced PA6 nylon with 30% glass fiber (PA6+G30). It operates at temperatures from -20°C to 120°C. Designed to protect cables and hoses in motion on automation equipment, it offers high strength, wear and corrosion resistance, and smooth operation. Connectors are available, and the length can be customized by the meter or by the number of links.

WSL30 Series Cable Drag Chain
The WSL30 is a multicolor enclosed drag chain in the 45 Series, featuring an open design on both sides for easy installation and maintenance. Made of PA6+G30 reinforced nylon, it offers high strength and wear resistance. It is black and suitable for temperatures from -20°C to 120°C. Connectors are included to protect cables and hoses in industrial automation equipment. Its compact design ensures smooth operation, making it suitable for medium- to high-speed applications.

WSL36 Series Cable Drag Chain
The WSL36 series is a colorful bridge-type cable carrier in the 65 series, with openings on both sides. It is suitable for machine tools, automation equipment, and other applications where moving cables and hoses need protection. Made of PA6+GF30, it is black and operates within a temperature range of -20°C to 120°C. The inner width B1 is 65 mm, and the outer height H2 is 85 mm. Available bend radii R include 50, 60, 75, 100, 150, 175, and 200 mm. Fixed connectors are included, with an 8.8 mm hole diameter. Multiple connector specifications are available to meet different installation requirements. When ordering, specify the model, inner width, bend radius, length (in meters or links), and connector type.

WSL37 Multicolor Bridge-Type Cable Carrier
The WSL37 multicolor bridge-type cable carrier features an open-on-both-sides design, ideal for rapid cable routing and high-speed motion. Inner width B1 = 80 mm, with bend radii from R150 to R250 mm. Made of PA6+GF30, it is black and rated for temperatures from -20°C to 120°C. Its compact pitch, light weight, low operating noise, and resistance to wear and corrosion make it a reliable choice. It can be used with connectors. Links per meter = 1000 ÷ pitch. Connectors are sold as a complete set.

WSLG.02 Series Cable Carrier Accessories
The WSLG.02 Series heavy-duty spine system is designed for cleanroom cable carriers (such as the WWC.28.65) and is suitable for light loads and short travel distances. The spine system includes components such as spine connectors (LG.28.02M/F), horizontal separators, vertical separators, and integrated cable dividers. It significantly increases the cable carrier’s unsupported span (900–1500 mm) and prevents cables from tangling or rubbing against each other. Its patented tensile-resistant design ensures stable operation without coming apart. Made of TPU, it offers heat resistance and wear resistance, with an antistatic option available. When selecting a system, consider the internal compartment layout of the cable carrier and ensure that cables and hoses occupy no more than 70% of the available space.

WSLG45F Steel-Reinforced Cable Carrier, Size 45, Bridge-Type Series
The WSLG45F steel-reinforced cable carrier, size 45, bridge-type series, is designed for long-travel applications. Its steel-reinforced construction prevents sagging, making it suitable for protecting and guiding cables and hoses on automation equipment. It has an inner width of 45 mm, an outer height of 67 mm, and an 8 mm hole diameter. A range of bend radii (50–200 mm) and corresponding outer widths is available to suit different installation spaces. The fixed connector is type C, with openings on both sides (L) for easy cable routing. Connector models are available for various bend radii, such as WSLG45F-45-50C through WSLG45F-45-175C. Orders can be customized by specifying the base model, length, and connector type. Designed for high-speed reciprocating motion in industrial environments, it offers high strength and durability.

WSLG65F Fully Enclosed Steel-Supported Cable Carrier
The fully enclosed Steel-Supported Cable Carrier 65 series is designed to protect cables over long distances. Built-in steel support components reinforce the structure, allowing unsupported spans of up to 5 m without sagging. Suitable for cables up to 60 mm in diameter, it has a 71.9 mm pitch and 14 links per meter. The actual installation height is H1 = H + 86.2 mm (load: 2.2 kg/m). Various bend radii (50–200 mm) and internal widths are available; the internal height is fixed at 65 mm. Openings are provided on both sides.

WSLG65Q Series Heavy-Duty Cable Carrier
The steel-reinforced 65 bridge-type cable carrier series is designed for long-distance applications. Integrated steel reinforcement provides added structural support, preventing sag over a 5 m span. It has an inner height of 45 mm, inner widths ranging from 65 to 300 mm, bend radii from 50 to 300 mm, and a pitch of 71.9 mm (14 links per meter). It is suitable for cables up to 60 mm in diameter. Connector models in this series are designated WSLG65Q-45-XXC, where XX denotes the bend radius in millimeters.

WWC.22.40 Cleanroom Cable Carrier
The WWC.22.40 series cleanroom cable carrier is designed for light loads and short travel applications. Its internal compartment system supports horizontal and vertical separators or integrated cable dividers (such as WWC.22.40.FGP and WWC.22.40.PGPLG) to keep cables neatly arranged. Made of TPU, the carrier is available in white, black, and custom colors. It supports speeds of ≤5 m/s and acceleration of ≤3 g, operates at 30±5°C and 45±15% relative humidity, and comes with an 18-month warranty. Its service life is ≥15 million cycles. Antistatic and flame-retardant options are available on request. The matching comb plate, model WWC.22.40.SZB, is used with the connector to prevent cables from tangling or rubbing against one another.

WWC.28.65 Series Cable Carrier
The WWC.28.65 Series cleanroom cable carrier (conduit) is made of TPU, with an inner height of 28 mm and an inner width of 65 mm, and is suitable for cleanroom environments. Operating speed is unspecified; acceleration is ≤3 g. Operating temperature is 30±5°C, and operating relative humidity is 45±15. The warranty is 18 months, and the service life is ≥15 million cycles. It can be fitted with an integrated cable separator (WWC.28.65.FGP) and a heavy-duty support bar (WSLG.02.R70) to divide the interior space for cables. The fixed-end bend radius is available in 60 mm (minimum) or 70 mm (recommended). The connector comes with a comb plate to prevent cables from tangling. Its new patented design prevents separation under tension. Suitable for light-load, short-stroke automation equipment.