Electric Linear Cylinders
High-Precision Miniature Electric Linear Actuator
This high-precision miniature electric linear actuator integrates a coreless brushless motor, planetary gearbox, and ball screw in an integrated drive and control architecture for precise, smooth linear positioning. Its drive and control system uses a field-oriented control (FOC) algorithm for closed-loop control of four variables: current, speed, position, and push-pull force. It offers fast response, ultra-high precision, long service life, oil-free operation, torque feedback, and low noise. Precision drive algorithm compensation further improves positioning accuracy. Suitable for positioning and alignment correction, pushing and transferring, and press insertion, it is widely used in automation equipment for computers, communications, and consumer electronics, as well as semiconductor equipment, robotics, biomedical equipment, and the renewable energy sector. The actuator offers high rigidity, low vibration, long service life, and consistent quality. Its modular design simplifies replacement and maintenance.
LF-MEA Series High-Precision Miniature Linear Electric Actuators
The LF-MEA series high-precision miniature linear electric actuators are compact electric actuators with integrated drive and control. They mount via the front or rear end cap and offer strokes of 8~20mm and maximum thrusts of 30~400N. They support Modbus RTU(RS485) and CAN bus communication, with rated voltages of DC12V±10%/DC24V±10% and repeat positioning accuracy up to ±3μm (±2μm optional). Some models can be equipped with an optional integrated force sensor (resolution ±0.1%FS) for precise force control and press-fit operations. The compact units measure as little as approximately 20×12×105.5mm and weigh from 0.12kg. Depending on the model, no-load and full-load speeds range from 1~33mm/s. They are rated IP40 and operate at 0~55℃ and below 85%RH, making them suitable for automated electronics assembly, precision dispensing, inspection, and other applications.
LF Series Miniature Linear Electric Actuators
The LF series is LENFOR's range of miniature linear electric actuators, integrating a drive motor, lead screw and position feedback into one unit. They are designed for short-stroke, high-precision pushing and positioning applications, including 3C electronics assembly, semiconductor and lithium battery testing, and medical and laboratory automation. The range comprises five product series by application: M (Mini), L (Large), E (Electronic), A (Actuator) and F (Force moment). Body widths of 0-99 mm and strokes of 001-999 mm are available. Supported communication methods include PWM, Modbus RTU (RS485), I/O (NPN/PNP) and CAN. Four accuracy grades are available: 0-5, 11-20, 31-40 and 41-50 μm. Options include different speed grades, with or without a holding brake, and mounting on the front end cap (default), on the side, or using fixing holes on a flat surface. Standard dimensions apply by default; a customer code must be added for customized versions. A 28AWG cable is supplied as standard, with wires designated RS485A (white), R
LF-M Mini Linear Electric Actuator
The LF-M Mini linear electric actuator is a high-precision miniature electric actuator in the LF-LENFOR series. Its model code follows a defined naming convention. It has a width range of 0-99mm and a stroke range of 1-999mm, and supports communication methods including TTL/PWM. It offers accuracy grade A (0-5μm), speed grade E (31-40mm/s), an optional holding brake, and front end cap mounting as standard. Its compact size makes it suitable for small automated equipment, precision positioning, laboratory instruments, and other applications. Dimensions can be customized to customer requirements.
LF-L Large Linear Actuator
The LF-L is the Large series in the LENFOR (LF) linear actuator family. It converts motor rotation into high-rigidity linear pushing and pulling motion and can replace conventional pneumatic cylinder and guide rail assemblies. It is widely used for pressing, lifting, and material handling in electronics assembly, lithium battery, photovoltaic, packaging, and inspection equipment. The series follows an ordering code: the company/brand code LF comes first, followed by the product series code (M=Mini, L=Large, E=Electronic, A=Actuator, F=Force moment), then width (mm, 0~99), stroke (mm, 001~999), communication method (TTL, PWM, Modbus RTU/RS485, I/O NPN or PNP, CAN), accuracy grade (μm ranges, such as 0~5, 11~20, 31~40, 41~50), speed grade (mm/s ranges, such as 6~10, 31~40), brake function (B series, optional Brake), and mounting method (D for default front end cap mounting
LF-E Series Electronic Electric Cylinders
LENFOR(LF) series electric cylinders/linear electric actuators use a modular alphanumeric naming system covering five sub-series: miniature (M), large (L), electronic (E), electric cylinder (A), and torque (F). Built around high-precision miniature linear motion, the products offer widths of 0-99mm and strokes of 1-999mm. Communication options include TTL, PWM, ModbusRTU(RS485), I/O(NPN/PNP), and CAN. Accuracy grades are 0-5μm, 11-20μm, 31-40μm, and 41-50μm, while speed grades are 31-40mm/s and 6-10mm/s. A holding brake is also available. Mounting options include the standard front end cap and mounting holes on the side or flat surface. No dimension specification is included by default; a customer code is appended for customized versions. Suitable for automation applications such as electronics assembly and precision positioning.
LF Series Electric Cylinders
The LENFOR LF Series comprises high-precision electric cylinders and linear actuators, including Mini, Large, Electronic, Actuator, and Force moment subseries. Product widths range from 0–99 mm, with strokes of 001–999 mm and thrust up to tens of newtons. Multiple communication options are supported, including TTL, PWM, Modbus RTU (RS485), I/O (NPN/PNP), and CAN. Accuracy grades include 0–5 μm, 11–20 μm, 31–40 μm, and 41–50 μm, while speed grades are 6–10 mm/s and 31–40 mm/s. A holding brake is optional and is not included by default. Mounting options include the standard front end cover, side mounting, and flat-surface mounting via fixing holes. Dimensions and specifications can be customized to customer codes. Applications include precision positioning, electronics assembly, semiconductors, and medical automation.
LF-F Torque Series Electric Cylinders
The LF-F Torque Series is a range of LENFOR(LF) linear electric cylinders using torque control for automated applications requiring precise force control. The series supports widths of 0-99mm and strokes of 001-999mm, with a choice of T-TTL or C-CAN communication. It has an accuracy grade of F(41-50μm) and a speed grade of E(6-10mm/s). Optional features include a holding brake(B) and mounting holes on a flat surface(P). No dimensional specification is provided by default; dimensions can be customized to customer requirements with a customer code appended. Applications include electronics assembly, precision positioning, and force-controlled press fitting.
LF-MEAF30 Series High-Precision Miniature Linear Electric Actuator with Force Sensor
The LF-MEAF30 series is a high-precision miniature linear electric actuator with a built-in force sensor, designed for precision press-fitting, gripping, inspection, and similar applications. It uses RS485 communication (A/B differential signals), a 12V+ power supply, and a common GND, with a 32AWG cable and HC-2510-4Y (product end) / HC-2510-4A (customer end) connectors. The model number LF-MEAF30-15-150-RBC-DD identifies the series, specifications, stroke, and configuration codes. Models can be selected by combining the desired stroke and configuration.

TCL/TCM80 Series Electric Cylinders
The TCL/TCM80 series electric cylinders are available in two configurations, TCL and TCM, with strokes from 25mm to 250mm. The catalog provides a table of overall dimensions in millimeters for each stroke length to help determine the installation space required. The series is suitable for automated applications requiring linear push-pull, positioning, and reciprocating motion. Select the TCL or TCM configuration based on the load, speed, and mounting method, and refer to the dimensions for the required stroke length.