Linear Shaft

SF Series Linear Shafts
SF series linear shafts are precision metric shafts with diameters from φ3 mm to φ150 mm and a maximum standard length of 6,000 mm. Extra-long shafts can be joined, and custom machining is available, including thread turning, end-face drilling, keyway milling, radial drilling, and stepped-shaft turning. Material options include high-quality 45 carbon steel (S45C), hardness HRC 58–60; GCr15 bearing steel (SUJ2), hardness HRC 60–62; and 9Cr18 stainless steel (SUS440), hardness above HRC 55. Hard chrome plating is available. Depending on the specification, shaft diameter tolerances range from -0.002 to -0.039 mm, effective hardened-layer depth is 0–0.025 mm, and unit weight is 0.4–3.0 kg/m. Suitable for automation equipment, linear motion guidance, transmission support, and other applications.

SP/SI Series Hollow Shafts
SP/SI Series hollow shafts are made from GCr15 bearing steel (SUJ2) and have a hardness of HRC 60–62, combining high strength with low weight. The SP series features metric hollow shafts with outer diameters of 12–60 mm and inner diameters of 6–48 mm; inner diameters and wall thicknesses can be customized to meet customer requirements. The SI series features imperial hollow shafts with outer diameters of 6.35–50.8 mm. Strict controls are maintained over outer diameter tolerances, roundness, and effective hardening depth. These shafts are suitable for linear motion guidance, drive supports, and precision mechanical structures. Their surfaces are hard and wear-resistant, while the cores retain good toughness, making them suitable for high-load, high-frequency reciprocating applications.

Guide Shaft
A guide shaft is a shaft-type component used to guide and support linear motion in industrial automation. It is commonly used in linear motion and lifting mechanisms. This series is made from 45# steel and undergoes multiple machining processes before being hard chrome plated. The finished product offers wear resistance, high precision, and good rigidity. Please note that the shaft ends, shoulders, threads, grooves, machined areas, and the interior of hollow guide shafts are not hardened or hard chrome plated. Hardness may be reduced within approximately 10 mm of machined areas, so take care to prevent rust during use and prolonged storage. Products are available in several end configurations, including a stepped end with an internal thread, straight stepped ends at both ends, and stepped ends with external threads at both ends. Diameter specifications are shown in the table as “codes,” with a range of sizes available. Machinable lengths range from approximately 20 to 1,500 mm, and most specifications can be adjusted in 1 mm increments. Tolerances vary by diameter, and the corresponding end-machining parameters are provided.

SF/WV Series Slide Shafts
SF/WV series slide shafts are designed for use with COMTOP linear bearings to provide linear guidance and reciprocating motion. They are suitable for automated linear motion applications with specific requirements for wear resistance, bending strength, and dimensional accuracy. The catalog lists parameters including Model No., shaft diameter d, Length, and hardening depth X. Select the shaft diameter and length based on the bearing bore, installation space, travel, and load, and verify the hardening depth against the fit requirements. Because OCR produced duplicate column headings in the table on this page, the complete model numbers and dimensions were not clearly preserved. Consult the original catalog or the manufacturer for available ordering specifications.

GD-Type Chrome-Plated Linear Shaft
The GD-type chrome-plated linear shaft belongs to the cylindrical linear guide (round shaft) series. It is made of GCr15 or 45# high-carbon steel and chrome-plated on the surface. Its hardness is HRC 62+2 (45#: HRC 58), with a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm. Both solid and hollow versions are available. Solid shaft sizes are available to suit all of our linear bearings, while hollow shafts are offered only in diameters greater than 12 mm. Shaft diameters range from Φ3 mm to Φ80 mm, with a G6 tolerance grade. These shafts are suitable for automation equipment requiring high-precision linear motion and offer good wear and corrosion resistance.

ABP Series Linear Shaft
ABP series linear guide shafts are identified by outer diameter (D), length (L), and inner diameter (d). Suitable for mechanical support, sliding guides, and similar applications, they are available in a range of outer diameters (20–100 mm); length and inner diameter depend on the selected model. Custom surface treatments are available to meet different load and precision requirements.

ZVFJW Guide Shaft, Internal Threads at Both Ends
The ZVFJW series comprises precision guide shafts with internal threads at both ends, designed for precision linear motion applications. Available materials include manganese steel (black oxide finish, hardness 33–38 HRC) and SUS304 stainless steel. The precision version has a g6 tolerance at the shaft ends, and a black oxide finish is available. Diameters range from 4 to 30 mm, and lengths from 25 to 450 mm (specified in 1 mm increments). Select coarse-thread metric threads (M). The shafts are induction hardened for high hardness and excellent wear resistance. When ordering, specify the diameter, length, and thread size at both ends.

ZVF Series Precision Guide Shafts
The ZVF Series precision guide shafts are available with an external thread at one end and an internal thread with a wrench slot or through-hole at the other, or with an internal thread and wrench slot at one end. Manufactured in precision grade (D tolerance g6) or standard grade (D tolerance h5), they are available in diameters from 6 to 30 mm and lengths from 25 to 445 mm. Shaft-end options include external threads (M), wrench slots (B), through-holes (P), and internal threads (N). Custom specifications are available. Suitable for precision positioning, linear-motion guidance, and other automation equipment applications.

ZSFAZ Series Optical Shaft
The ZSFAZ series is a standard guide shaft with wrench flats, featuring an external thread on one end and an internal thread on the other. It is suitable for applications requiring axial fastening and wrench installation. The shaft uses a precision fit with a D tolerance of g6, offering high surface hardness and excellent wear resistance. A range of steel grades and surface treatments is available. When ordering, specify the length L, thread size M, wrench-flat dimension B, through-hole dimension P, and dimensions N, SC, and H. The series is widely used in automation equipment, molds, and mechanical transmissions, providing high-precision linear-motion guidance.

ZSFSZ Series Linear Shafts
The ZSFSZ Series comprises standard guide shafts with through-holes, designed for precision linear-motion guidance. The D tolerance is h5. The shafts feature an external thread at one end and either an internal thread with a wrench slot or a through-hole at the other. An example order code is ZVFJW8; ZSFSZ belongs to the same product category and follows a similar coding format: type - L - M - B - P - N - SC - H. Optional parameters such as length and thread specifications should be selected to suit the application. Precision-machined for reliable guidance, these shafts are widely used in automation equipment, jigs, and fixtures.

ZPSFAZ Series Precision Guide Shafts
This series of precision guide shafts has an external thread at one end and an internal thread at the other, and is available in two configurations: with a wrench slot or with a through hole. Precision-machined, the shafts have a diameter tolerance of g6 (wrench-slot type) or h5 (through-hole type), making them suitable for high-precision linear motion guidance. Made of stainless steel, they offer good corrosion resistance. When ordering, specify the base model (e.g., ZPSFAZ), length L, external thread size M, wrench-slot width B, through-hole diameter P, internal thread size N, counterbore diameter SC, and counterbore depth H. Available options vary by model.

ZPSFSZ Series Guide Shafts
The ZPSFSZ series comprises standard guide shafts with a through-hole, featuring an external thread at one end and an internal thread at the other. They are designed for linear motion guidance applications. Precision-machined to D tolerance h5, these shafts provide a close fit. When ordering, specify the type, length (L), thread size (M), and dimensions B, P, N, SC, and H to suit your installation requirements. They are typically made of bearing steel or stainless steel; refer to the material chart for the selected type for details.

ZVPAZ Series Precision Guide Shafts
This series of precision guide shafts features external threads at one end and internal threads at the other. Choose between a wrench-flat type and a through-hole type. Designed for guiding and power transmission in automation equipment, the shafts are available in various materials and tolerance grades (such as D tolerances g6 and h5). Standard lengths can be customized, and thread specifications, wrench-flat dimensions, through-hole diameters, and other parameters can be selected to meet the needs of high-precision linear motion.

ZVRAZ Precision Guide Shafts
The ZVRAZ series features precision guide shafts with a wrench slot, external threads at one end and internal threads at the other. They are suitable for automation equipment requiring highly accurate guidance and secure fastening. The shaft diameter tolerance is g6, ensuring consistent fit accuracy. Made from high-quality steel, the surface can be treated as required. When ordering, specify the length, thread specifications, and wrench-slot parameters.

Guide Shaft, Internal Thread at One End
This series of precision guide shafts features an internal thread at one end and is primarily used for linear motion guidance and fixed support. Multiple shaft diameters are available, ranging from 4 mm to 1440 mm. Lengths from 20 to 1200 mm can be selected depending on the shaft diameter. Short-thread sizes are available in M2, M2.6, M3, M4, M5, M6, M8, and M12. The default surface finish is untreated (M). Manufactured to high precision, these products are suitable for automation equipment, mechanical guide rails, and other applications.