Model · Guide Shaft

Guide Shaft

A guide shaft is a shaft-type component used to guide and support linear motion in industrial automation. It is commonly used in linear motion and lifting mechanisms. This series is made from 45# steel and undergoes multiple machining processes before being hard chrome plated. The finished product offers wear resistance, high precision, and good rigidity. Please note that the shaft ends, shoulders, threads, grooves, machined areas, and the interior of hollow guide shafts are not hardened or hard chrome plated. Hardness may be reduced within approximately 10 mm of machined areas, so take care to prevent rust during use and prolonged storage. Products are available in several end configurations, including a stepped end with an internal thread, straight stepped ends at both ends, and stepped ends with external threads at both ends. Diameter specifications are shown in the table as “codes,” with a range of sizes available. Machinable lengths range from approximately 20 to 1,500 mm, and most specifications can be adjusted in 1 mm increments. Tolerances vary by diameter, and the corresponding end-machining parameters are provided.

Overview

A guide shaft is a shaft-type component used to guide and support linear motion in industrial automation. It is commonly used in linear motion and lifting mechanisms. This series is made from 45# steel and undergoes multiple machining processes before being hard chrome plated. The finished product offers wear resistance, high precision, and good rigidity. Please note that the shaft ends, shoulders, threads, grooves, machined areas, and the interior of hollow guide shafts are not hardened or hard chrome plated. Hardness may be reduced within approximately 10 mm of machined areas, so take care to prevent rust during use and prolonged storage. Products are available in several end configurations, including a stepped end with an internal thread, straight stepped ends at both ends, and stepped ends with external threads at both ends. Diameter specifications are shown in the table as “codes,” with a range of sizes available. Machinable lengths range from approximately 20 to 1,500 mm, and most specifications can be adjusted in 1 mm increments. Tolerances vary by diameter, and the corresponding end-machining parameters are provided.

Product category: Linear Motion Components / Linear Shafts

Original catalogs

Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page
Guide Shaft — Catalog page