Model · SP/SI Series Hollow Shafts
SP/SI Series Hollow Shafts
SP/SI Series hollow shafts are made from GCr15 bearing steel (SUJ2) and have a hardness of HRC 60–62, combining high strength with low weight. The SP series features metric hollow shafts with outer diameters of 12–60 mm and inner diameters of 6–48 mm; inner diameters and wall thicknesses can be customized to meet customer requirements. The SI series features imperial hollow shafts with outer diameters of 6.35–50.8 mm. Strict controls are maintained over outer diameter tolerances, roundness, and effective hardening depth. These shafts are suitable for linear motion guidance, drive supports, and precision mechanical structures. Their surfaces are hard and wear-resistant, while the cores retain good toughness, making them suitable for high-load, high-frequency reciprocating applications.
Overview
SP/SI Series hollow shafts are made from GCr15 bearing steel (SUJ2) and have a hardness of HRC 60–62, combining high strength with low weight. The SP series features metric hollow shafts with outer diameters of 12–60 mm and inner diameters of 6–48 mm; inner diameters and wall thicknesses can be customized to meet customer requirements. The SI series features imperial hollow shafts with outer diameters of 6.35–50.8 mm. Strict controls are maintained over outer diameter tolerances, roundness, and effective hardening depth. These shafts are suitable for linear motion guidance, drive supports, and precision mechanical structures. Their surfaces are hard and wear-resistant, while the cores retain good toughness, making them suitable for high-load, high-frequency reciprocating applications.
Product category: Linear Motion Accessories / Precision Shafts
Models & specifications
| Model / Name | Diameter tolerance (mm) | Effective hardness depth (mm) | Inner diameter (mm) | material | Outer diameter (mm) | Roundness (mm) |
|---|---|---|---|---|---|---|
| SP12 SP12 Metric Hollow Shaft | -0.006 - 0.017 | 0.6 - 1.5 | 6 | GCr15 (SUJ2) | 12 | 0 - 0.011 |
| SP13 SP13 Metric Hollow Shaft | -0.006 - 0.017 | 0.6 - 1.5 | 6 | GCr15 (SUJ2) | 13 | 0 - 0.011 |
| SP16 SP16 Metric Hollow Shaft | -0.006 - 0.017 | 0.8 - 2.0 | 10 | GCr15 (SUJ2) | 16 | 0 - 0.011 |
| SP20 SP20 Metric Hollow Shaft | -0.007 - 0.020 | 0.8 - 2.0 | 13 | GCr15 (SUJ2) | 20 | 0 - 0.013 |
| SP25 SP25 Metric Hollow Shaft | -0.007 - 0.020 | 0.8 - 2.0 | 17 | GCr15 (SUJ2) | 25 | 0 - 0.013 |
| SP30 SP30 Metric Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | 20 | GCr15 (SUJ2) | 30 | 0 - 0.016 |
| SP35 SP35 Metric Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | 24 | GCr15 (SUJ2) | 35 | 0 - 0.016 |
| SP40 SP40 Metric Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | 30 | GCr15 (SUJ2) | 40 | 0 - 0.016 |
| SP50 SP50 Metric Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | 38 | GCr15 (SUJ2) | 50 | 0 - 0.016 |
| SP60 SP60 Metric Hollow Shaft | -0.010 - 0.029 | 0.8 - 3.0 | 48 | GCr15 (SUJ2) | 60 | 0 - 0.019 |
| SI-04 SI-04 Imperial Hollow Shaft | -0.004 - 0.012 | 0.4 - 1.0 | GCr15 (SUJ2) | 6.35 | 0 - 0.008 | |
| SI-06 SI-06 Imperial Hollow Shaft | -0.005 - 0.014 | 0.6 - 1.5 | GCr15 (SUJ2) | 9.525 | 0 - 0.009 | |
| SI-08 SI-08 Imperial Hollow Shaft | -0.006 - 0.017 | 0.8 - 2.0 | GCr15 (SUJ2) | 12.7 | 0 - 0.011 | |
| SI-10 SI-10 Imperial Hollow Shaft | -0.006 - 0.017 | 0.8 - 2.0 | GCr15 (SUJ2) | 15.875 | 0 - 0.011 | |
| SI-12 SI-12 Imperial Hollow Shaft | -0.007 - 0.020 | 0.8 - 2.0 | GCr15 (SUJ2) | 19.05 | 0 - 0.013 | |
| SI-16 SI-16 Imperial Hollow Shaft | -0.007 - 0.020 | 0.8 - 2.0 | GCr15 (SUJ2) | 25.4 | 0 - 0.013 | |
| SI-20 SI-20 Imperial Hollow Shaft | -0.007 - 0.020 | 0.8 - 3.0 | GCr15 (SUJ2) | 31.75 | 0 - 0.013 | |
| SI-24 SI-24 Imperial Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | GCr15 (SUJ2) | 38.1 | 0 - 0.016 | |
| SI-32 SI-32 Imperial Hollow Shaft | -0.009 - 0.025 | 0.8 - 3.0 | GCr15 (SUJ2) | 50.8 | 0 - 0.016 |
