Trapezoidal Lead Screw

Jinde (Jinyan) T-Type Lead Screw Nuts
Jinde (Jinyan) T-type lead screw nuts are trapezoidal lead screw nuts used with T-type trapezoidal lead screws to convert rotary motion into linear motion. They are suitable for light-duty drive applications in woodworking machinery, packaging equipment, lifting platforms, and more. Screw outer diameters range from 16~40mm, with three pitch options: P4, P5, and P6. All have a pressure angle of 30 degrees. Nut dimensions are specified as outer diameter×length, such as Ø29×20, Ø34×25, Ø37×25, Ø44×25, Ø47×25, Ø49×25, and Ø54×25. Each nut must be matched to a screw of the corresponding diameter. Screw lengths are available in 250, 300, 350, 400, 500, 600, and 1000mm; extended lengths of 1500mm and 2000mm are also available for screws with outer diameters of 20mm and above. To select a model, first determine the screw outer diameter based on the load, then select the matching nut model according to the pitch (P4/P5/P6) and nut outer diameter×length.

45# Steel Trapezoidal Lead Screw (Black Oxide)
The 45# steel trapezoidal lead screw (black oxide) is a power transmission component used to convert rotary motion into linear motion. The catalog lists diameters of 20, 24, 30, 34, 36, 40, 45, 50, and 60 mm, and lengths of 250, 300, 350, 400, 500, 600, 1000, 1500, and 2000 mm. It is made of 45# steel with a black oxide surface treatment. Orders are specified as “diameter×length” in mm; both dimensions must be specified when selecting a product. Listed alongside square-thread lead screws, it is suitable for general mechanical transmission and positioning applications.

Standard Trapezoidal Lead Screw and Nut Assembly
This standard trapezoidal lead screw and nut assembly uses metric trapezoidal threads with a 30° flank angle and is primarily designed for power transmission and positioning applications. Nominal screw diameters range from 4 mm to 50 mm, with custom sizes also available. A variety of lead, pitch, and thread-start combinations are offered, including left-hand threads. The screws are manufactured to ISO and Chinese national standard GB/T 5796. General-purpose trapezoidal threads use the metric general-purpose thread tolerance system. Matching nuts are available in non-flanged, round-flange, and double-sided cut-flange styles, with dynamic permissible thrust loads ranging from 1.47 kN to 12.36 kN. Custom machining is available; please contact the manufacturer for sizes not listed in the table.