Cross Roller Guide Rail · Slide Table

NG Series Anti-Creep Crossed Roller Guideway

N/O Series Crossed Needle Roller Guideway

HW Series Type Cage

HW Series Type Cage

SW-H Series Three-Row Crossed Roller Guide

M/V Series Crossed Needle Roller Guide

Visible English subtitle: M/V cross needle roller guide.

FVR Series Crossed Roller Guides

FVR series crossed roller guides use precision rollers arranged at right angles in a roller cage and running on V-grooved surfaces in dedicated rails. Two rows of roller guides mounted in parallel can support loads from 4 directions. Preload can be applied to provide clearance-free, highly rigid linear guidance with smooth, light movement. The unique roller retention method increases the effective roller contact length by approximately 1.7 times compared with conventional products. A shorter pitch and more rollers provide approximately 2 times greater rigidity and 6 times longer service life, along with excellent lubricant retention, low friction, and smooth motion. Two accuracy grades are available: high grade (H) and precision grade (P). The H grade has a height tolerance of ±0.02 and a matched-pair variation of 0.01; the P grade has a tolerance of ±0.01 and a matched-pair variation of 0.005. Nominal models FVR1~FVR9 correspond to different roller diameters and can be selected by roller diameter, rail length, accuracy grade, and ball count. One set consists of 4 rails and 2 cages. These guides are widely used in the sliding sections of office equipment, measuring instruments, printed circuit board drilling machines, optical instruments, and X-ray equipment.

FVRT-A Series Crossed-Roller Guide Tables

The FVRT-A series is an integrated precision table built around a pair of crossed-roller guides. It consists of a base, table, roller cage and stop screws. Cylindrical rollers arranged at 90° to each other guide the table along the base, while a cage separates the rollers. This design provides short-travel, high-rigidity, low-friction linear motion while supporting combined loads in the vertical and horizontal directions. Both the table and base have countersunk mounting holes, allowing the base to be screwed to a frame and the workpiece to be secured to the table. Stop screws at both ends of travel limit the sliding range, prevent the roller cage from falling out and allow preload adjustment during assembly. The series is suited to applications requiring light loads, high precision and a compact design, such as optical inspection, precision measurement, manual fine-adjustment stages and small automated positioning mechanisms. Models can be selected according to the required travel, table size and mounting hole positions.

FVRU Series Standard Crossed Roller Guides

The FVRU series consists of standard crossed roller guides with a crossed roller and cage design, suitable for precision guidance applications requiring high rigidity and smooth linear motion. The standard table and base are made of aluminum alloy, while the rails and rollers are made of Gcr15 bearing steel. Rail hardness is HRC58 or higher, roller hardness is HRC60 or higher, and the cage is made of SUS304. The model designation consists of the nominal model FVRU, roller diameter, and slide length. Suffixes may be added, including N (45# steel with electroless nickel plating) and A (countersunk holes in the base). If no suffix is specified, the unit has a black anodized aluminum alloy construction and upward-facing threaded holes in the base.

FVRT Series Ultra-Compact Crossed Roller Guides

The FVRT series is FARAY's ultra-compact crossed roller guide, featuring rollers arranged at 90° to each other in a SUS304 cage. This rolling structure supports radial and reverse-radial loads in four directions as well as moments within a minimal installation space, providing high-rigidity, high-precision linear guidance for short strokes. The slide table is made of 45# steel, while the base, rails and rollers are made of Gcr15 bearing steel. The rails have a hardness of HRC58 or higher, the rollers HRC60 or higher, and the cage is made of SUS304 stainless steel. The series is suitable for light-load, high-precision applications such as compact precision equipment, optical and semiconductor devices, measuring instruments and electronics assembly stations. Surface finish options: no marking indicates black oxide, while N indicates electroless nickel plating. Base mounting hole options: no marking indicates upward-facing threaded holes in the base, while A indicates upward-facing countersunk holes in the base. The model code combines the nominal model, roller diameter and slide table length. Select the specification according to the available installation space, stroke and load requirements.

LBV Series Crossed Roller Guideway Sets

LBV Series Crossed Roller Guideway Sets

The LBV series crossed roller guideway is a linear guidance component that uses cylindrical rollers arranged at 90° to one another. It can support both vertical and lateral loads simultaneously and offers high rigidity, low friction, and high positioning accuracy. It is suitable for automated equipment requiring high-rigidity, high-precision linear motion. The series comprises two cross-sectional sizes: LBV1 (assembled width 10mm, main dimension 5mm) and LBV2 (assembled width 15mm, main dimension 5mm). Each size is available in multiple assembled lengths (20~80mm for LBV1 and 30~180mm for LBV2), with a corresponding number of rollers (5Z~32Z) and maximum strokes of 12~102mm. Select a model based on parameters including maximum stroke, assembled dimensions, roller count, allowable load, and basic load rating.

LBV Series Anti-Creep Crossed Roller Guide Set

LBV Series Anti-Creep Crossed Roller Guide Set

The LBV series anti-creep crossed roller guide set provides precise linear motion while preventing misalignment. Its built-in rack-and-pinion mechanism features a gear on the cage that engages with a rack on the guide rail. This completely prevents rolling element slip (creep), addressing the challenge of preventing misalignment in lifting devices and high-cycle applications. The width of the guide rail mounting surface on the mounting base must be no greater than B1. The series includes 8 sizes, from LBV1 to LBV15, covering roller diameters Da of 1.5~15mm and guide rail widths B of 3.8~34mm. Basic dynamic load ratings C1 range from 0.107kN to 19.62kN, and static load ratings C01 range from 0.118kN to 22.32kN. These guide sets are suitable for high-precision linear guidance and rapid lifting applications where misalignment must be prevented.

V Series Crossed Roller Guideways

V Series Crossed Roller Guideways

V Series crossed roller guideways are high-precision linear motion guide components. They use cylindrical rollers arranged in a crossed pattern to support loads from multiple directions, making them suitable for machine tools, precision measuring equipment, and automation systems. During installation, the mating mounting surfaces must have flatness and parallelism tolerances tighter than the guideway's final running accuracy; grinding is usually required. Preload is adjusted using preload adjustment screws aligned with the rollers. Adjustment must be performed in two stages, preliminary and fine, with repeated tightening in a crisscross sequence at equal torque. Excessive preload can shorten guideway life, damage the tracks, and cause cylindrical rollers to tilt and lock. The catalog lists adjustment screw sizes and recommended tightening torques for V1, V2, V3, V4, V6, V9, and V12 models, ranging from M2~M6 and 0.008~0.80 N·m, respectively, for reference when setting preload during installation.

LWRE Crossed Roller Guide

LWRE Crossed Roller Guide

The LWRE crossed roller guide is a high-rigidity linear motion guide featuring a cross-arranged roller design for high load capacity, precision, and low friction. An optional anti-creep mechanism (ACS type) helps prevent cage displacement. It is suitable for precision positioning, semiconductor equipment, machine tools, and other applications. The series conforms to SKF standards and is available in a range of sizes; see the catalog for specific dimensions and specifications.

R-Type Crossed Roller Guideway

R-Type Crossed Roller Guideway

The R-Type crossed roller guideway is part of SCHNEEBERGER’s standard product range. Its cylindrical rollers are arranged crosswise to provide high rigidity and highly precise linear motion. The guideway and cage are designed as an integrated unit for easy installation. A range of widths and lengths is available, making it suitable for precision positioning in applications such as precision machinery, semiconductor equipment and measuring instruments. The numbers in the model designation indicate the guideway width and length combination; see the specifications table for exact dimensions.

RN Crossed Roller Guideways

RN Crossed Roller Guideways

RN crossed roller guideways are part of SCHNEEBERGER’s standard product range. Their crossed-roller arrangement delivers high rigidity and highly precise linear motion. They are available in a variety of rail cross-section sizes, including the 30, 40, 61, 92 and 122 series, and in a wide range of lengths up to 1,000 mm. They are suitable for applications requiring high load capacity and low friction, such as precision machine tools, measuring instruments and semiconductor equipment. The rollers are made of bearing steel, and the cages are available in stainless steel or resin. An anti-creep feature is available (RNG type). Mounting dimensions comply with international standards, making replacement easy.

RNG anti-creep crossed roller guideway

RNG anti-creep crossed roller guideway

The RNG anti-creep crossed roller guideway is a premium product in the SCHNEEBERGER standard range. Its anti-creep cage design effectively prevents roller drift and slippage, ensuring high-precision, high-rigidity linear motion. It is suitable for precision positioning applications requiring heavy loads and high rigidity, such as CNC machine tools, semiconductor equipment, and measuring instruments. The product is available in three widths—RNG40, RNG60, and RNG90—with guideway lengths from 50 to 500 mm to meet a range of travel requirements. The guideway and cage are precisely matched to provide smooth, low-friction motion, along with excellent service life and reliability.

SWRG Anti-Creep Crossed Roller Guideway

SWRG Anti-Creep Crossed Roller Guideway

The SWRG anti-creep crossed roller guideway is part of Swissberger’s standard product range. Its crossed roller arrangement provides high rigidity, high precision, and anti-creep performance, making it suitable for precision equipment that requires smooth linear motion. The guideway is available in two cross-sectional sizes, 6 mm and 9 mm, with a range of stroke options achieved by combining different cage lengths and roller counts. Basic load rating data is available. Lightweight and easy to install, it is widely used in automation equipment, optical instruments, medical devices, and other applications.

LGC Series Crossed Roller Guides and Tables

LGC Series Crossed Roller Guides and Tables

The LGC series of three-row crossed roller guides is a standardized AIRTAC product line. Its rollers are arranged in three crossed rows to provide linear guidance with high rigidity, precision, and load capacity. The series comprises two subseries, LGC1A and LGC2A, with guide widths of 17 mm and 24 mm and heights of 4.5 mm and 6.5 mm, respectively. Lengths range from 20 mm to 180 mm, with increments varying by subseries. Counterbored mounting holes feature a consistent pitch—10 mm for the LGC1A series and 15 mm for the LGC2A series—for easy installation. These guides are suited to applications requiring compact linear guides, such as precision automated machinery, material-handling equipment, and industrial robots. Dynamic and static load ratings are calculated based on the number of rolling elements; exact values vary by model. The products meet AIRTAC standards and are compatible with leading brands on the market.

VR-type crossed roller guide

VR-type crossed roller guide

The THK-standard VR-type crossed roller guide is a high-rigidity linear motion component featuring a crossed roller arrangement for high load capacity and precision. The product range includes several sub-series, such as VR1, VR2, VR9, VR12, VR15, and VR18. Rail lengths range from 20 mm to 1,200 mm, with maximum strokes from 12 mm to 750 mm. It is suitable for automated equipment requiring high-precision guidance and heavy-load capacity, including machine tools, semiconductor equipment, and industrial robots. The guide consists of a cage and rollers, with a basic dynamic load rating of up to 4.31 kN per roller. Preload is adjustable, the unit is lightweight, and mounting dimensions are standardized.

VB-type crossed roller guide

VB-type crossed roller guide

THK standard VB-type crossed roller guides feature a crossed-roller design for high rigidity and precision, making them ideal for precision positioning and linear motion in automation equipment. The series includes models such as VB1, VB3, VB4, and VB6, with strokes ranging from 12 mm to 298 mm. Different roller counts (Z suffix) are available to meet load requirements. The compact mounting dimensions, adjustable preload, and high rated load make these guides a versatile choice.

CRW-type crossed roller guide

CRW-type crossed roller guide

CRW-type crossed roller guides are high-precision linear motion components that meet IKO standards. Their cylindrical rollers are arranged crosswise, allowing them to withstand loads in all directions. The series includes various sizes, such as CRW1, CRW3, CRW6, CRW9, and CRW12, each with a different guide width and rated load capacity. Lengths can be selected as required. These products are suitable for high-rigidity, high-precision automation equipment, including precision machine tools, semiconductor equipment, and medical instruments. Technical specifications such as key dimensions, rated dynamic load, static load, and allowable load are detailed in the catalog.

CRWM Three-Row Crossed Roller Guide

CRWM Three-Row Crossed Roller Guide

The CRWM three-row crossed roller guide is a standard IKO product. Its three-row cylindrical roller arrangement provides high rigidity, precision, and load capacity. It is suitable for linear motion applications requiring high load capacity and rigidity, such as machine tools, industrial robots, and precision measuring equipment. The guide is available in three width series—CRWM1, CRWM2, and CRWM3—with lengths ranging from 20 mm to 300 mm. Its basic dynamic load rating is at least 125 N, and it supports high permissible loads. Precise mounting dimensions ensure excellent interchangeability.

CRWG Anti-Creep Crossed Roller Guideway

CRWG Anti-Creep Crossed Roller Guideway

The CRWG anti-creep crossed roller guideway is a high-rigidity linear motion component designed to IKO standards. Its crossed cylindrical rollers effectively prevent creeping at low speeds, ensuring smooth, stable linear motion. It is suitable for applications requiring high-precision positioning, including precision machine tools, semiconductor equipment, and medical devices. The guideways are available in widths of 4 mm and 6 mm, and lengths from 80 mm to 350 mm to suit different stroke requirements. Basic dynamic and static load ratings are provided to meet a range of load requirements.

CRWMG Three-Row Anti-Creep Crossed Roller Guide

CRWMG Three-Row Anti-Creep Crossed Roller Guide

The CRWMG three-row anti-creep crossed roller guide is part of IKO’s standard product range. It features a three-row cylindrical roller design with anti-creep functionality, making it suitable for high-precision linear motion applications. The guide comes with side protectors and is available in various mounting dimensions. Its basic dynamic load rating starts at 1,230 N, its basic static load rating at 1,180 N, and its allowable load is 392 N. Models range from CRWMG4-80 to CRWMG4-320 in 40 mm length increments to accommodate different travel requirements. Its compact design and high rigidity make it widely used in automation equipment, machine tools, semiconductor equipment, and other fields.

CRW-H Series Crossed Roller Guides and Slides

CRW-H Series Crossed Roller Guides and Slides

The CRW-H crossed roller guide is part of IKO’s standard product range. Its crossed-roller design, with rollers arranged alternately, provides high rigidity and precision. It is suitable for linear motion applications involving heavy loads and frequent reciprocating movement. The series comes in two basic sizes, CRW2 and CRW3, with guide lengths ranging from 30 mm to 300 mm to accommodate different stroke requirements. Mounting dimensions, rated loads, and other specifications vary by model. These guides are widely used in industrial automation equipment, precision machinery, measuring instruments, and other applications.

CRWG-H Anti-Creep Crossed Roller Guide

CRWG-H Anti-Creep Crossed Roller Guide

The CRWG-H Anti-Creep Crossed Roller Guide is a standard IKO product featuring cylindrical rollers arranged in a crossed pattern. Its anti-creep design offers high rigidity and precision, making it suitable for applications requiring precise positioning under heavy loads. It is available in a range of specifications, with rail lengths from 80 mm to 320 mm and maximum strokes from 59.4 mm to 241.8 mm. The basic dynamic load rating ranges from 10,500 to 35,700 N, the basic static load rating from 17,100 to 81,900 N, and the allowable load from 5,690 to 27,800 N. It has 1 to 7 roller groups (40 mm per group) to accommodate different stroke and load requirements.

CRWM-H Three-Row Crossed Roller Guide

CRWM-H Three-Row Crossed Roller Guide

The IKO standard CRWM-H three-row crossed roller guide features a three-row crossed roller design that provides high rigidity, precision, and load capacity. It is suitable for precision linear motion applications subject to heavy loads and moments. The series is available in three width options—CRWM2, CRWM3, and CRWM4—with different cross-sectional dimensions. Lengths range from 30 mm to 500 mm, in increments of 15 mm, 25 mm, and 40 mm, respectively. Its high basic dynamic and static load ratings meet heavy-duty requirements. Standardized mounting dimensions make it easy to integrate into a variety of automation equipment. Caged cylindrical rollers reduce friction and extend service life. Suitable for precision machinery applications such as machine tools, industrial robots, and semiconductor equipment.

CRWMG-H Three-Row Anti-Creep Cross Roller Guide

CRWMG-H Three-Row Anti-Creep Cross Roller Guide

This series of three-row anti-creep cross roller guides features an IKO standard design and anti-creep functionality, making it suitable for high-precision linear motion applications. Key specifications: available in Type 2 and Type 4 widths, with lengths ranging from 30 mm to 320 mm in increments of 15 mm or 40 mm. The guides offer high basic dynamic and static load ratings, high permissible loads, and precise mounting dimensions. The guide rail weighs 0.99 kg/m (Type 2) or 3.28 kg/m (Type 4). Each set includes three guide rails.

SV-Type Crossed Roller Guide

SV-Type Crossed Roller Guide

NB standard SV-type crossed roller guides are high-rigidity, high-precision linear motion guide components. They use staggered rollers as rolling elements and can support loads in all directions. The series includes standard SV and H-type (high-load) models in a wide range of sizes, making them suitable for automation equipment, machine tools, semiconductor equipment, and other applications requiring high load capacity and precision positioning. Specifications include stroke, number of rollers, cage dimensions, combined dimensions, mounting dimensions, basic dynamic load rating, basic static load rating, and permissible load. Strokes range from 12 mm to 720 mm, and the number of rollers varies by model.

SVW Triple-Row Crossed Roller Guide

SVW Triple-Row Crossed Roller Guide

The SVW triple-row crossed roller guide is designed to NB standards and features a three-row crossed roller arrangement. It offers high rigidity, precision, and load capacity, making it suitable for linear motion applications that require a compact installation space and the ability to handle heavy loads. With strokes ranging from 12 mm to 70 mm and a variety of models available, it features high dynamic and static load ratings and is ideal for automation equipment, machine tools, semiconductor equipment, and other applications.

SV-H Crossed Roller Guideway

SV-H Crossed Roller Guideway

The SV-H crossed roller guideway is a high-precision linear motion component that uses alternately arranged rollers as rolling elements. It offers high rigidity, high precision, and low friction. The series is available in a range of sizes, with strokes from 22 mm to 180 mm and roller counts from 8 to 60. It has a basic dynamic load rating of up to 16,000 N, a basic static load rating of up to 27,200 N, and an allowable load of up to 9,070 N. It is suitable for applications requiring precise positioning, such as automation equipment, machine tools, and precision instruments. The guideway is made of high-quality bearing steel and features 2.35 mm diameter rollers with a hardened surface for excellent wear resistance.

NV-Type Round-Pin Crossed Roller Guideway

NV-Type Round-Pin Crossed Roller Guideway

The NV-type round-pin crossed roller guideway features a crossed cylindrical roller arrangement for highly rigid, high-precision linear motion. It is suitable for precision positioning and heavy-duty applications. Available in a range of sizes, it offers strokes of 18–275 mm and 5–74 rollers, with basic dynamic load ratings of up to 104,000 N and static load ratings of up to 187,000 N. Models range from NV030-52 to NV6400-39Z; different suffixes indicate different sizes and load ratings to suit a variety of applications.

SVW-H Three-Row Crossed Roller Guideway

SVW-H Three-Row Crossed Roller Guideway

The SVW-H three-row crossed roller guideway meets NB standards. Its three rows of cylindrical rollers are arranged in a crossed configuration to deliver high rigidity and precise linear motion. It is suitable for precision equipment subject to loads from multiple directions, such as machine tools and automated assembly lines. Model SVW2030H-8Z has a 22 mm stroke and 8 rollers, with a compact design and excellent load capacity.

NVW Three-Row Crossed Roller Guideway

NVW Three-Row Crossed Roller Guideway

The NVW three-row crossed roller guideway is a high-precision linear motion component built to NB standards. Its three rows of crossed rollers support loads from multiple directions, making it suitable for automated equipment requiring high rigidity and precision. The series is available in three guideway widths—20 mm, 30 mm, and 40 mm—with a range of length and roller-count combinations for each width. Key dimensions include guideway length and mounting-hole spacing. The basic dynamic load rating ranges from 1,900 to 7,110 N, the static load rating from 1,170 to 9,080 N, and the allowable load from 390 to 3,020 N. Weight per set ranges from 28 to 255 kg. Stroke ranges from 18 to 170 mm, with 5 to 43 rollers. These products are widely used in machine tools, semiconductor equipment, industrial robots, and other applications.

LWR Crossed Roller Guideways

LWR Crossed Roller Guideways

LWR crossed roller guideways are precision linear motion components manufactured to SKF standards. Their crossed roller arrangement provides high load capacity, excellent rigidity and smooth movement. Available in a range of sizes from LWR3050 to LWR6400, this series is suited to applications in automated equipment that require high-precision positioning and heavy-load transfer. The rollers make line contact with the guideway surfaces, resulting in low friction and long service life. They are also easy to install. The optional anti-creep LWRECAS series is suitable for vertical or inclined mounting.

LWRECAS Anti-Creep Crossed Roller Guide

LWRECAS Anti-Creep Crossed Roller Guide

The LWRECAS anti-creep crossed roller guide is designed to SKF standards and features an anti-creep mechanism that prevents the rollers from shifting during operation. It is suitable for high-precision linear motion applications. Its compact structure and high rigidity deliver stable, reliable guidance.

Schneeberger N/O and NOG Crossed Needle Roller Guideways

Schneeberger N/O and NOG Crossed Needle Roller Guideways

This series comprises Schneeberger standard N/O crossed needle roller guideways and NOG anti-creep crossed needle roller guideways. The crossed needle roller arrangement provides high rigidity and load capacity. The N/O is the standard type, while the NOG features an anti-creep design for precision positioning and high-speed motion. Guideway cross-section widths range from 31 to 78 mm, heights from 15 to 45 mm, and needle roller diameters from 2 to 3.5 mm. A wide range of lengths is available, up to 1,600 mm. Compatible with HW-type cages, the needle rollers have load capacities of 530–3,600 N each. These guideways are widely used in automation equipment, machine tools, semiconductor equipment, and other applications requiring precise linear motion.

NOG anti-creep crossed needle roller guideways

NOG anti-creep crossed needle roller guideways

NOG anti-creep crossed needle roller guideways are standard SCHNEEBERGER products. Their crossed needle roller arrangement provides anti-creep performance, making them suitable for high-precision, high-rigidity linear motion applications. The guideways are made of hardened steel and use needle rollers with diameters from 2 mm to 3.5 mm. Width A ranges from 31 mm to 78 mm, and height B from 15 mm to 45 mm. A range of sizes is available: 62015, 92025, 22025, 23525, 3045 and 3555, each in multiple standard lengths from 100 mm to 1,400 mm. Precision mounting holes are provided, and an HW-type cage is available as an option. These guideways are suitable for machine tools, automation equipment, precision measuring instruments and other applications requiring backlash-free, low-friction linear guidance.

Schneeberger HW-Type Cage

Schneeberger HW-Type Cage

The HW-type cage is an essential component of Schneeberger standard crossed-roller guideway systems and is suitable for N/O-type and NOG-type guideways. Made from high-strength engineering plastic or metal, it offers high rigidity, low friction, and excellent wear resistance. It is available in six sizes (10, 15, 16, 20, 25, and 30) for different needle roller specifications (Dw from 2 mm to 3.5 mm). Load capacity per needle roller ranges from 530 N to 3,600 N, and the maximum length is 1,990 mm. The cage spacing (e) and widths (t, w) are precisely designed to ensure even roller distribution and stable operation. Widely used in precision positioning, heavy-load handling, and automation equipment, it effectively prevents creeping and improves motion accuracy and service life.

NO-H Crossed Roller Guideway

NO-H Crossed Roller Guideway

The NO-H Crossed Roller Guideway is part of SCHNEEBERGER’s standard range. It uses cylindrical rollers arranged alternately to provide high rigidity and precision linear motion. It is suitable for automation equipment requiring heavy-load capacity, high rigidity and high precision, such as machine tools, robots and semiconductor equipment. A range of cross-sectional sizes is available (A: 31–78 mm, B: 15–45 mm, roller diameter: 2–3.5 mm), with custom lengths available on request. The guideways and roller cages can be separated for easy installation and maintenance. The model designation follows the format NO + size + height + H, for example, NO62015H.

NOG-H Anti-Creep Crossed Needle Roller Guide Rail

NOG-H Anti-Creep Crossed Needle Roller Guide Rail

The standard NOG-H anti-creep crossed needle roller guide rail from ShineTop features a crossed-roller design with anti-creep functionality, making it suitable for high-precision linear motion applications. It is available in several sizes: NO62015H, NO92025H, NO225H, NO235H, NO3045H and NO3555H. Each size has different width (A), height (B) and needle diameter (Dw) dimensions. Rail lengths can be selected to suit requirements, ranging from 200 mm to 600 mm, with common increments of 50 mm or 100 mm. This series offers high rigidity and load capacity, with standardized mounting dimensions for easy replacement. Needle diameters range from 2 mm to 3.5 mm, widths from 31 mm to 78 mm, and heights from 15 mm to 45 mm to accommodate different load and space requirements. Suitable for automation equipment, machine tools, precision machinery and more.

SHW Series Crossed Roller Guides

SHW Series Crossed Roller Guides

This series comprises Schneeberger standard crossed roller guides and SHW-type cages, including standard NO-H, anti-creep NOG-H, MV-H, and MVG-H types. Roller diameters range from 2 mm to 3.5 mm, guide widths from 15 mm to 50 mm, and lengths from 100 mm to 1,500 mm (standard lengths: 100–600 mm; maximum length: 1,500 mm). SHW cages are available in four sizes—15, 20, 25, and 30—corresponding to roller diameters of 2–3.5 mm. Load capacity per roller ranges from 750 N to 3,600 N. These products offer high rigidity, low friction, and high precision, making them suitable for precision linear motion applications in automation equipment, machine tools, semiconductor equipment, and more.

SCHNEEBERGER Standard M/V Crossed Needle Roller Guideways

SCHNEEBERGER Standard M/V Crossed Needle Roller Guideways

SCHNEEBERGER Standard M/V crossed needle roller guideways are high-precision linear guidance components consisting of guideways and cages. They are designed for applications requiring low friction, high rigidity, and high load capacity. The guideways use a crossed needle roller design, with rollers arranged alternately to support loads in both directions. The range includes standard M/V models and anti-creep MVG models, which differ slightly in their dimensions. The MVG models use a specially designed cage to prevent roller creep. Guideway sizes range from 3015 to 8050, with several lengths available up to 1,500 mm. HW-type cages are available in sizes 10 to 30 and can be ordered separately. These products are widely used in precision machinery, including semiconductor equipment, machine tools, and measuring instruments.

MVG anti-creep crossed needle roller guideway

MVG anti-creep crossed needle roller guideway

The MVG anti-creep crossed needle roller guideway is a standard Shinaibo product. Its crossed needle roller design prevents creeping, making it suitable for high-precision, high-rigidity linear motion applications. Available in a range of sizes, including MVG3015, MVG4020, MVG5025, MVG6035, MVG7040 and MVG8050, each model has its own cross-sectional dimensions (A, B, Dw, etc.) and length range (100 mm to 1,500 mm). Needle roller diameters range from 2 mm to 3.5 mm, providing high load capacity. The HW (KZST) cage keeps the needle rollers evenly spaced. These guideways are widely used in machine tools, automation equipment and precision instruments, and offer low friction, long service life and easy installation.

MV-H Crossed Needle Roller Guideway

MV-H Crossed Needle Roller Guideway

The MV-H crossed needle roller guideway is designed to the Schneberger standard, with needle rollers arranged crosswise to provide high rigidity and precision. It is suitable for precision machinery, machine tools, automation equipment, and more. The guideway is 30–80 mm wide and 15–50 mm high, with roller diameters of 2–3.5 mm. Standard lengths range from 100 to 600 mm, with a maximum length of 1,500 mm. The matching SHW cage ensures even roller distribution and reduces friction. For detailed dimensions such as mounting-hole spacing and counterbores, see the specification table.

MVG-H Anti-Creep Crossed Needle Roller Guideway

MVG-H Anti-Creep Crossed Needle Roller Guideway

The MVG-H series comprises SCHNEEBERGER standard anti-creep crossed needle roller guideways. Their crossed-needle design prevents creep, making them suitable for high-precision, high-rigidity linear motion applications. Six sizes are available: 3015, 4020, 5025, 6035, 7040 and 8050. Widths range from 30 mm to 80 mm, heights from 15 mm to 50 mm, and needle roller diameters from 2 mm to 3.5 mm. Depending on the size, lengths range from 100 mm to 1,500 mm. The guideways are compatible with SHW (KZST) cages, with needle roller diameters of 2 mm to 3.5 mm and high load capacity of 750–3,600 N per needle roller. They are suitable for machine tools, industrial automation, precision instruments and other applications.

FVR2 Series Crossed Roller Guides

FVR2 series crossed roller guides feature rails and rollers made from Gcr15 bearing steel and a SUS304 cage. The rails have a hardness above HRC58 and the rollers above HRC60, providing high rigidity, low friction and high-precision linear guidance. Assembly dimensions are M=12mm, A=6mm and L=30mm, with M3 mounting hole threads. Eight sizes are available, from FVR2-30×5Z to FVR2-135×23Z, covering maximum strokes of 18~84mm. They are suitable for limited-stroke linear motion requiring high rigidity and precision in machine tools, precision measuring instruments, semiconductor equipment and optical equipment. Basic load ratings are calculated per roller; dynamic and static load ratings are expressed in kN.

FVR3 Series Crossed Roller Guides

The FARAY FVR3 series consists of miniature crossed roller guides made up of rails, rollers and cages. The rollers are arranged at 90° to one another, allowing the guides to support radial and lateral loads simultaneously while providing high-rigidity, low-friction, backlash-free linear motion. The assembled dimensions are M=18mm wide and A=8mm high. Seven standard lengths are available, with maximum strokes of 28~138mm and rail lengths of 50~225mm. Mounting holes are evenly spaced at n×25mm, and mounting screws are M4. The rails and rollers are made of GCr15 bearing steel, with hardness ratings above HRC58 and HRC60 respectively. The cages are made of SUS304 stainless steel. These guides are suitable for short-stroke precision guidance in precision measuring instruments, small optical platforms, semiconductor equipment and automation systems.