Ball Screw

DFM Series for Precision Grinding

RLS Series Rotating Nut Ball Screw

SAC Series Low-Profile Linear Guide

SF Series Precision Ground Series

SFM Series – Precision Grinding Grade

SCN/SCI Series — Precision Ground Series

RSFY Series Nut-Rotating Ball Screw

OFV/DFV Series Precision Ground Ball Screws

ZT21 Series Gripper Pad (Round)

ZT21 Series Gripper Pad (Round)

Display name: Gripper Pad (Round).

SAH Series High-Assembly Linear Guideway

OFU/DFU Series (DIN 69051 FORM B) Precision Ground Grade Series

RLB Series Nut-Rotating Ball Screw

SFI/SF Series – Precision-Ground Series

SKF Series Precision Ground Ball Screw Series

The page is titled “SKF Precision Ground Series Specifications and Dimensions.”

AK Series (Square Fixed Side)

AK Series (Square Fixed Side)

The AK Series comprises square fixed-side support units designed for the fixed end of linear guide systems. Each unit includes a bearing housing, bearing, pressure plate, spacer, shaft seal, and locking nut to provide stable axial support. The units accommodate shaft diameters from 10 to 25 mm and feature standardized mounting dimensions for easy compatibility with AF Series support units. Made of metal; surface finish is not specified and should be confirmed.

AF Series (Square Support Block)

AF Series (Square Support Block)

The AF Series square support block is used on the driven side of linear guide systems in conjunction with the AK fixed-side support. It uses deep-groove ball bearings (600ZZ/6000ZZ/6002ZZ/6204ZZ/6205ZZ) and a C-shaped retaining ring to provide stable support. For shaft diameters of 8–25 mm, it features standardized mounting dimensions and a lightweight design, making it suitable for supporting linear motion in automation equipment.

EK Series

EK Series

EK series support units secure the ends of ball screws and provide stable support. Made from high-strength cast iron, they feature a compact design and are easy to install. They accommodate shaft diameters from 5 to 20 mm and are compatible with a range of screw diameters. Multiple mounting sizes are available to meet different application requirements. Suitable for linear transmission systems in automation equipment, machine tools, industrial robots, and more.

FK Series Ball Screw Motor Mount

FK Series Ball Screw Motor Mount

The FK Series Ball Screw Motor Mount is designed specifically for servo and stepper motors. The support assembly comes pre-fitted with bearings and a locknut, so no separate fixed-side support is required, making installation easy. It uses matched P5 angular-contact bearings with preload, providing zero axial clearance and high shaft alignment accuracy to minimize misalignment between the ball screw and motor shafts. Available in 11 sizes with d1 ranging from 5 mm to 40 mm to suit different shaft diameters. A frame oil seal keeps out dust, making it suitable for high-precision drive applications.

SSX Ball Screw Motor Mount Series

SSX Ball Screw Motor Mount Series

SSX30/SSX35 series ball screw motor mounts secure the end of the screw and connect it to the motor, providing high-precision support. SSX30 has a 30 mm shaft diameter, while SSX35 has a 35 mm shaft diameter. Two center heights are available (150/180 mm). The main body is made of cast iron and is fitted with bearings (7206/7207) and a frame oil seal. Mounting dimensions include the bolt-circle diameter (PCD), overall length (L), and height (H). Compatible with stepper motors (suffix B). Couplings must be ordered separately. Suitable for automation equipment, machine tools, and more.

SSXF Series Ball Screw Motor Mounts

SSXF Series Ball Screw Motor Mounts

The SSXF Series Ball Screw Motor Mount is a precision support component that connects a ball screw to a motor and provides support at the fixed end. It uses a bearing combination (such as 7210 bearings) and is compatible with different screw shaft diameters (6/8/10/12/15/20 mm). Various mounting hole spacings (D1 = 30/46/50 mm) and motor flange sizes (M3/M4 threads) are available, making it suitable for stepper or servo motors. The series includes multiple models, such as SSXF6/8-38, SSXF10-38, and SSXF12-57. Weights range from 0.29 kg to 0.66 kg, with installation lengths of 61 mm or 74 mm and heights of 17 mm or 22 mm. Suitable for linear transmission systems in automation equipment, CNC machine tools, engraving machines, and more.

DSG Steel Ball Screw Nut Housing

DSG Steel Ball Screw Nut Housing

DSG series steel ball screw nut housings are made from high-quality steel and designed to secure and support ball screws. A wide range of sizes is available, including DSG 16H, 20H, 25H, 32H and DSG 1616, 2020, 2525, 3232, 4040 and 5050. All dimensions comply with standards, and the mounting hole positions and overall dimensions are precisely manufactured to ensure a reliable fit with the ball screw. The housings feature center distances CL1 and CL2, with threaded mounting holes X and Y for easy installation. Suitable for precision drive applications in a wide range of automation equipment, machine tools and more.

SFT Series Ball Screws

SFT Series Ball Screws

SFT Series ball screws are standard precision assemblies featuring a recirculating ball design, with high precision, high rigidity, and low friction. The model code example is SFT R 025 05 B 2 D G C5 1000-Po, and includes parameters such as type, diameter, lead, thread direction, number of ball circuits, preload, accessories, accuracy grade, overall length, and suffix. They are suitable for precision transmission applications such as CNC machine tools and automation equipment.

SFU Ball Screw Assemblies

SFU Ball Screw Assemblies

The SFU series ball screw assembly is a precision transmission component that converts rotary motion into linear motion and complies with DIN 69051. It features a single- or double-nut design, with nominal diameters of 12–100 mm, leads of 4–20 mm, ball diameters of 2.381–9.525 mm, and 3–6 ball circuits. Dynamic load ratings range from 593 to 9420 kgf, static load ratings from 1129 to 39183110 kgf, and stiffness from 12.5 to 100 kgf/μm. It is widely used in CNC machine tools, automation equipment, precision machinery, and other fields.

DFU Series Ball Screw Nuts

DFU Series Ball Screw Nuts

DFU series ball screw nuts comply with the DIN 69051 FORM B standard. Nominal diameter: 16–100 mm; lead: 4–20 mm; number of ball circuits: 3–6. Dynamic load rating: 629–9420 kgf; static load rating: 1240–39183 kgf; stiffness: 15–300 kgf/μm. Suitable for precision transmission, machine tools, automation equipment, and more.

SFI Ball Screw Nut

SFI Ball Screw Nut

The SFI series ball screw nut features a recirculating design and complies with DIN standards. It is available with a range of lead and ball diameter options, and offers high rigidity and load capacity. Parameters include lead (I), ball diameter (Da), number of ball circuits (N), rigidity (K), dynamic load rating (Ca), and static load rating (Coa). It is widely used in industrial automation equipment.

SFE Series Ball Screw Assembly

SFE Series Ball Screw Assembly

SFE series ball screws are available in a range of diameters (16–50 mm) and leads (16–64 mm) for precision linear motion. They offer high rigidity and load capacity, with dynamic load ratings of 410–7,260 kgf and static load ratings of 680–27,600 kgf. Flange-mounted and equipped with dust seals, they are suitable for automation equipment, machine tools, and other industries.

DFI Series Ball Screw Nut

DFI Series Ball Screw Nut

The DFI series consists of ball screw nuts. This page provides only the type designation and does not list specific models or specifications. It is shown on the same page as the SFE series, but no further information is available.

BK Support Unit Series

BK Support Unit Series

This series of fixed-side support units (SUPPORT UNIT BK) provides axial and radial support for the fixed end of a ball screw. Product illustrations show the mounting holes and overall dimensions (such as 2-x drill Ø Y counterbore depth Z and the B and L series dimensions). Refer to other pages for specific specifications. These units typically feature a cast-iron or steel housing with built-in precision bearings and are suitable for a range of linear motion systems.

Support Unit Series

Support Unit Series

This series of fixed-side support units (round type), models FK-6 to FK-280, is designed to support the fixed end of ball screws. The round housing contains deep-groove ball bearings, providing high rigidity and easy installation. Shaft diameters range from 6 mm to 280 mm to meet different load requirements. The compact design features standardized mounting-hole locations for easy integration with linear modules. Made from high-quality alloy steel, the units are available with electroplated or black-oxide finishes. They are widely used in automation equipment, machine tools, assembly lines, and other applications. This series is dimensionally compatible with the FK series from renowned international brand THK, making it an excellent alternative.

PTB Precision Ball Screw

PTB Precision Ball Screw

PTB Series precision ball screws are made with an SCM21 alloy steel body and SUJ2 bearing steel balls. The body has a hardness of HRC 32°–38°, while the balls have a hardness of HRC 62°. Designed for precision mechanical transmission, they are available in various sizes to meet different stroke and load requirements.

BK Series (Square Fixed Type)

BK Series (Square Fixed Type)

The BK Series is a square fixed-side support unit designed to support the fixed end of a ball screw. It uses deep-groove ball bearings (Class C7) or angular-contact bearings (Class C5), with axial clearances controlled to 0.005–0.01 mm and 0.01 mm, respectively. The bearings are German-made and assembled in a DF configuration, making the unit suitable for ball screw nut installation. The assembly consists of a bearing housing, bearings, shims, a spacer ring, an oil seal, locking screws, and other components, providing stable axial positioning and rotational support.

BF Series (Square Support Side)

BF Series (Square Support Side)

The BF Series (Square Support Side) is a support unit for the driven end of a ball screw, used together with the BK Series (fixed side). Its square-body design makes installation easy. Suitable for a wide range of linear drive systems.

EK Series Support Unit (Raised Fixed Side)

EK Series Support Unit (Raised Fixed Side)

The EK Series raised fixed-side support unit supports the fixed end of a ball screw and uses German-brand bearings. Choose between C7 deep-groove ball bearings (axial clearance: 0.005–0.01 mm) and C5 angular-contact bearings (preloaded, zero axial clearance). The assembly consists of a bearing housing, bearings, mounting plate, spacer rings, shaft seal, shaft sleeve, and other components. It is suitable for high-precision linear motion systems.

EF Series Yisika (Raised Support Side)

EF Series Yisika (Raised Support Side)

The EF Series Yisika (Raised Support Side) is the support side of a fixed-support-type support unit and is mounted using a rectangular flange. It is suitable for auxiliary support of ball screws and carries radial loads only. It uses a C7-precision deep-groove ball bearing (6000 series), with a maximum axial clearance of 0.005–0.01 mm. The compact assembly consists of a bearing housing, bearing, C-type retaining ring, and other components, and is easy to install.

FK Series Round Fixed-End Support

FK Series Round Fixed-End Support

The FK Series Round Fixed-End Support is a support unit designed to support one end of a ball screw. It features a bearing housing and bearing assembly and accommodates shaft diameters from 6 to 30 mm. It uses either German-brand deep-groove ball bearings (Class C7, axial clearance of 0.005–0.01 mm) or angular-contact ball bearings (Class C5, adjustable preload, zero axial clearance), assembled in a DF configuration. It is suitable for precision linear drive systems. Mounting options A and B are available, with identical dimensions. Multiple models are offered to suit different shaft diameters.

AK Series (Square Fixed End)

AK Series (Square Fixed End)

The AK Series square fixed-end unit supports ball screws. Its square bearing-housing design is compact and easy to install. The product is available in C7 precision (using 6xxx-series deep-groove ball bearings, with maximum axial clearance of 0.005–0.01 mm) and C5 precision (using preloaded 7xxx-series angular-contact bearings, with zero axial clearance). It features German-brand bearings in a DF arrangement, making it particularly suitable for ball screw applications. The series is available in five shaft diameters: 10 mm, 12 mm, 15 mm, 20 mm, and 25 mm, with model numbers AK10 through AK25. Detailed overall dimensions are provided for each size, including total length, width, height, and mounting-hole spacing. Weights range from 0.5 to 1.92 kg, making these units suitable for a variety of small- to medium-sized ball screw drive systems.

FKA Series (Round Fixed Support Unit)

FKA Series (Round Fixed Support Unit)

The FKA Series round fixed support units are products by YSK (Yiska), designed specifically to provide fixed support for ball screws. Preloaded bearings provide zero axial clearance, and the bearings are assembled in a DF configuration, making these units ideal for securing ball screws. Surface treatments include phosphating or blackening. Multiple shaft diameters are available (6 mm to 20 mm), with precision grades including C3, C5, N, and C5N. Two mounting methods, A and B, are available. See the table for overall dimensions and mounting hole locations.

MC Series Nut Housing

MC Series Nut Housing

The MC Series Nut Housing is a nut mounting block for ball screws used in FA machinery. Made from high-quality steel, it is available in a range of sizes to suit different ball screw models. Widths (W) range from 48 mm to 86 mm, lengths (L) from 32 mm to 55 mm, and weights from 0.2 kg to 1 kg. It is compatible with various ball screw series, including BAK, BNK, W, R, FSW, and FSIC, and can replace comparable products from international brands such as THK, NSK, HIWIN, and PMI. Standardized mounting holes and overall dimensions make replacement easy.

MGD Series Nut Mounts

MGD Series Nut Mounts

MGD Series nut mounts are mounting brackets for ball screw nuts. They accommodate a range of screw diameters and leads, provide precise mounting dimensions, and are suitable for FA machinery. Models include MGD12, MGD16, MGD20, and MGD20L, each with different mounting-hole spacing and overall dimensions.

WBK Series High-Load Fixed Support Unit

WBK Series High-Load Fixed Support Unit

The WBK Series High-Load Fixed Support Unit supports ball screws and features high-precision preload adjustment. The bearings are prefilled with grease. The support body, bearings, cover, spacer, and oil seal form an integrated, non-disassemblable assembly. The locking nut is specially designed for ball screws, with the perpendicularity of the triangular thread end face strictly controlled to prevent loosening. The surface is phosphated for rust resistance. DF combination models are available, with shaft diameters from 17 mm to 40 mm to suit different specifications.

MBK Series High-Load Support Units

MBK Series High-Load Support Units

MBK Series High-Load Support Units are precision components designed to support the ends of ball screws. They feature high-precision preload adjustment and an integrated design combining the support housing, bearings, cover, spacer, oil seal, and locknut, so no disassembly is required. The bearings are pre-filled with grease. The locknut is specially designed for ball screws, with tightly controlled end-face perpendicularity, and is fitted with a small anti-loosening screw. The surface is phosphated for corrosion resistance. DF (single-support) and DFF (double-support) configurations are available for shaft diameters φd ≤ 20 mm. Models include MBK15DF, MBK17DF, MBK17DFF, MBK20DF, and MBK20DFF, covering different shaft diameters and load capacities. The basic dynamic load rating reaches 47,500 N, and the allowable speed is 7,600 min⁻¹. These units are suitable for high-rigidity, high-precision linear motion systems.

BK support unit

BK support unit

The BK support unit is a support block for the fixed end of a ball screw, providing reference dimensions for shaft-end machining and accommodating a range of screw diameters. Precision-machined and used with a locknut, it ensures stable, accurate installation of the screw. Models range from BK10 to BK40, for screw diameters of 12–50 mm and thread specifications from M10×1.0 to M40×1.5, covering common ball screw sizes. Widely used in CNC machine tools, automation equipment, precision machinery, and other applications.

YSK Series Integrated Drive Mount

YSK Series Integrated Drive Mount

The YSK Series Integrated Drive Mount combines the motor mount and bearing housing in a single machined component, ensuring that the motor shaft, coupling shaft, bearing bore, and lead screw axes are all coaxial. This overcomes the alignment difficulties associated with separate mounting components. Suitable for servo and stepper motors, it improves precision and simplifies installation. It uses matched P5 DF angular-contact bearings with zero axial clearance, making it suitable for ball screws. Available with a range of flange sizes (57/60/80/86/90/100/110/130 mm) and thread sizes (M4/M5/M6/M8) to fit different motors.

FK/EK/AK Series Support Units

FK/EK/AK Series Support Units

FK/EK/AK series support units are fixed-side support units for ball screws, used to secure and support the screw shaft end. The series includes three subseries: FK, EK, and AK. The FK series is suitable for shaft diameters of 6–40 mm, the EK series for 6–28 mm, and the AK series for 12–28 mm. These support units offer standard shaft-end machining dimensions, including ball screw shaft outer diameter, shaft-end outer diameter, nominal thread, and sleeve length, ensuring stable and precise screw installation. Common models include FK4 to FK30, EK4 to EK20, and AK10 to AK20.

SFU/DFU Series Ball Screws

SFU/DFU Series Ball Screws

This series of ball screws includes SFU and DFU types, designed for precision transmission and positioning. Diameters range from 12 mm to 63 mm, with leads of 5 mm and 10 mm, ball diameters of 3.175 mm and 6.35 mm, and 3- or 4-circuit designs. They offer high rigidity and load capacity and are widely used in machine tools, automation equipment, and other applications.

DFU Series Ball Screws

DFU Series Ball Screws

The DFU series features internally recirculating ball screws with a large lead, making them suitable for high-speed feeds and heavy-load applications. The series offers high rigidity, high precision, and a long service life, and is widely used in CNC machine tools, automation equipment, and precision positioning systems. Key specifications for model DFU 6310-4: screw diameter 63 mm, lead 10 mm, ball diameter 6.350 mm, dynamic load 5,070 kg, static load 16,600 kg, and rigidity 122 kg/μm. The nut mounting dimensions follow standard specifications for easy replacement and installation.

BK Series Support Units

BK Series Support Units

BK Series support units are designed to secure and support the ends of lead screws. They are typically used with ball screws to provide axial positioning and support. The series includes fixed-side and support-side units: the fixed-side unit secures the screw axially, while the support-side unit supports its free end. Featuring high-precision bearings and a robust housing, BK Series support units ensure stability and long service life during high-speed operation. They are widely used in linear motion systems, including CNC machine tools, automation equipment, and industrial robots.

FF Series Support Units

FF Series Support Units

FF Series Support Units support the shaft ends of linear motion systems and are available in two types: fixed side (FK) and support side (FF). Featuring high-precision bearings and a retaining-ring design, they are easy to install and suitable for linear motion shafts with diameters of 6–30 mm. The housing is made of aluminum alloy, and the bearings are sealed with metal dust covers. A range of sizes is available to meet different load and precision requirements.