Bearings

Self-Lubricating Rod End Spherical Plain Bearing Series

Self-Lubricating Rod End Spherical Plain Bearing Series

This series of self-lubricating rod end spherical plain bearings is available in two configurations: female thread (S...T/K) and male thread (SA...T/K). The sliding contact surface is steel against PTFE composite material, requiring no maintenance. The rod end body is made of carbon steel with an environmentally friendly white zinc coating; the outer ring is bronze, and the inner ring is bearing steel with a hardened spherical surface coated in hard chromium. These bearings offer high load capacity, easy installation and removal, and simplified mechanisms. Size range: 5–50 mm bore. Stainless steel versions are available on request (add S before the model number).

Self-lubricating rod end spherical plain bearing series

Self-lubricating rod end spherical plain bearing series

This series of self-lubricating rod end spherical plain bearings is available in two configurations: female thread (S...T/K) and male thread (SA...T/K). The sliding contact surface consists of steel against PTFE composite material and requires no maintenance. The rod end body is made of carbon steel with an environmentally friendly white zinc plating; the outer ring is bronze; and the inner ring is hardened bearing steel with a hard chrome-plated spherical surface. These bearings offer high load capacity, easy installation and removal, and a simplified design. The female-thread series has bore diameters from 5 mm to 50 mm, as does the male-thread series. Left-hand threads (add 'L' to the model designation) and stainless steel (add 'S' before the model designation) are available as options. Dimensions are similar to those of the POS series, but the lubrication method differs. Multiple models and sizes are available to meet different load and application requirements.

PHS Series Rod End Bearings

PHS Series Rod End Bearings

PHS series female-threaded rod end bearings with liner inserts feature a carbon steel rod end body with an environmentally friendly zinc finish. The sliding surface is fitted with a bronze liner, and the inner ring (ball) is made of bearing steel with a hard-chrome-plated spherical surface. Lubrication is provided through a grease nipple or the rod end. These bearings support high axial loads, are easy to install and remove, and help simplify mechanisms. A range of sizes is available from PHS5 to PHS30, including PHS30-1, with bore diameters from 5 mm to 30 mm and thread sizes from M5×0.8 to M30×2. Left-hand-thread models use the suffix “L,” for example, PHSL20. The sliding contact pair is steel/bronze. Stainless steel versions are available to order; add “S” before the model designation when ordering.

POS Male-Threaded Lined Rod End Spherical Plain Bearing Series

POS Male-Threaded Lined Rod End Spherical Plain Bearing Series

The POS series of male-threaded lined rod end spherical plain bearings features carbon steel rod ends with an environmentally friendly zinc-plated protective coating. The sliding surfaces are lined with bronze, and the inner ring (ball) is made of bearing steel with a hard-chrome-plated spherical surface. Lubrication is available through a grease nipple or the rod end. These bearings offer high axial load capacity and are easy to install and remove. Size range: bore diameter d from 5 mm to 30 mm; thread sizes from M5×0.8 to M30×2. Left-hand threads (add L to the end of the model number) and stainless steel construction (add S to the beginning of the model number) are available to order. Dynamic load: 3.25–64 kN; static load: 5.7–88.6 kN; weight: 0.013–1.1 kg.

SI...ES Series

SI...ES Series

E-series rod end spherical plain bearings are available in two types: female-threaded (SI...ES) and male-threaded (SA...ES). They are assembled from a rod end body and a GE...E or GE...ES series radial spherical plain bearing. The rod end body is made of forged carbon steel with an environmentally friendly white zinc plating. Lubrication is provided through a grease nipple or the rod end eye. The steel-on-steel sliding contact surfaces offer high load capacity, easy installation and removal, and a simplified design. Models range from SIS5E to SIS80ES and SA5E to SA80ES, with bore diameters of 5–80 mm and thread sizes from M5×0.8 to M64×4. Left-hand threads are also available. These bearings are suitable for mechanical linkages, automation equipment, and other applications requiring oscillating or tilting motion.

SA...ES Series

SA...ES Series

This series comprises externally threaded assembled (E-series) rod end spherical plain bearings, assembled from a rod end body and GE...E, GE...ES, or GE...ES-2RS series radial spherical plain bearings. The rod end body is made of forged carbon steel with an environmentally friendly white zinc-plated finish. It can be lubricated through a grease nipple or the rod end eye. These bearings offer high load capacity, easy installation and removal, and a simplified design. The sliding contact surfaces are steel-on-steel. A wide range of sizes is available, with bore diameters from 5 mm to 80 mm and thread sizes from M5×0.8 to M64×4. Dynamic load ratings range from 3.4 kN to 400 kN, and static load ratings from 3.9 kN to 750 kN. They are suitable for automation equipment operating under high loads and frequent motion.

Internal-threaded, lined rod end spherical plain bearings (inch series)

Internal-threaded, lined rod end spherical plain bearings (inch series)

This series comprises internal-threaded, lined rod end spherical plain bearings in inch sizes. Each bearing has a projecting threaded shank, available with either left-hand or right-hand threads. Types include PHSB...S (standard), PHSB...L (left-hand thread), and PHSB...C (other type); their design features correspond to the respective types in the PHS series. The inner ring's spherical surface is chrome-plated, and the rod end body is zinc-plated. These bearings are designed for connections using inch-based dimensions. Load ratings and dimensional specifications follow the applicable standards. For left-hand thread models, add “L” after the bearing number and “H” to the thread designation. For example: PHSB10S 5/8-18-3BLH.

Male-Threaded Insert-Type Rod End Bearings (Inch Series)

Male-Threaded Insert-Type Rod End Bearings (Inch Series)

This inch-series range of male-threaded, insert-type rod end bearings features an extended threaded shank available with left- or right-hand threads. The inner ring’s spherical surface is chrome-plated, and the rod end body is zinc-plated for good wear and corrosion resistance. A range of sizes is available for applications involving oscillating or tilting motion, such as construction machinery and automation equipment. Rated loads and dimensions conform to inch-series standards.

SI..PK

SI..PK

The SI..PK series comprises steel-on-steel rod end spherical plain bearings. The outer ring is formed by extrusion, the spherical surface is lined with SF1 material, and the inner ring's spherical surface is chrome-plated. Each bearing has an extended shank with a slotted thread, available in left- or right-hand versions. The rod end body is zinc-plated or blackened. The sliding contact surface uses a steel/PTFE composite, making the bearing maintenance-free. These bearings offer high load capacity and are easy to install and remove. The static load range is 170–4,900 kgf, and weights range from 10 to 380 g. Suitable for automation equipment, mechanical linkages, and similar applications.

SQ Series Single-Ball Rod End Bearings

SQ Series Single-Ball Rod End Bearings

SQ Series single-ball rod end bearings feature a ball housing with an “L”-shaped projecting shank and an internal thread. The ball housing is made of zinc-based alloy, and the threads are available in left- and right-hand versions. Right-hand threads are supplied as standard; left-hand threads must be specified by adding “L” to the model designation. These bearings are available with a seal (suffix -RS) or without a seal (suffix omitted). A range of bore sizes is available from 5 mm to 22 mm, with thread sizes from M5×0.8 to M22×1.5. Overall lengths range from 29 to 95 mm, and weights are approximately 0.026–0.713 kg. Suitable for automation equipment, mechanical linkages, and other applications involving frequent oscillation and radial loads, they offer a compact design, easy installation, and good wear resistance.

GIHO-K...DO

GIHO-K...DO

The GIHO-K...DO series of maintenance-required rod end spherical plain bearings is designed for hydraulic components and features an internal thread and locknut. The rod end body is available with a left- or right-hand internal thread and consists of a GE...ES or GE...ES 2RS radial spherical plain bearing fitted into the rod end body. It features a locking slot and set screw, and the rod end body has a lubrication hole or grease fitting. Suitable for hydraulic system connections that require frequent adjustment and must withstand heavy loads.

GK...CK

GK...CK

The GK...CK series comprises maintenance-required rod end spherical plain bearings for hydraulic components, with an internal thread and locknut. The rod end body is available with a left- or right-hand internal thread and consists of a GE...LO radial spherical plain bearing and a rod end housing with a clamping slot and set screw. The rod end housing has a lubrication hole or grease nipple. The series is available with bore diameters from 12 mm to 125 mm, thread sizes from M12×1.25 to M100×3.0, dynamic loads from 10.8 kN to 950 kN, and static loads from 24.5 kN to 1,430 kN. The model designation follows the format GK[bore diameter]CK, for example, GK 12 CK. Add “L” to models with a left-hand thread, such as GKLL 12 CK. Models marked with an asterisk (GK 12 CK*) cannot be lubricated. Suitable for power-transmission connections in hydraulic systems.

GK...DO / GF...DO

GK...DO / GF...DO

This series of rod-end spherical plain bearings is designed for hydraulic components and is available in two types: GK...DO and GF...DO. The GK type has a rod-end body with a weldable base and locating pin, and consists of a GE...ES or GE...ES 2RS radial spherical plain bearing and a rod-end body fitted with a lubrication hole or grease nipple. The GF type has a similar design, but its rod-end housing can be welded. These bearings require maintenance; some models (marked with *) are unlubricated. A 2RS sealed version is available. Dimensions: bore diameter d from 10 mm to 120 mm; outside diameter D from 22 mm to 180 mm; dynamic load from 8.15 kN to 950 kN; static load from 15.6 kN to 3,250 kN.

GF...DO Series Rod End Spherical Plain Bearings

GF...DO Series Rod End Spherical Plain Bearings

The GF...DO series comprises rod end spherical plain bearings for hydraulic components that require welding during maintenance. The rod end housing has a weldable base and locating pin, and consists of a GE...ES or GE...ES 2RS radial spherical plain bearing and a rod end housing. The housing has a lubrication hole or grease nipple for lubrication. Sealed -2RS versions are also available, such as the GF70 DO-2RS. Bore diameters range from 20 mm to 120 mm. These bearings withstand high dynamic and static loads and are suitable for hydraulic cylinders, construction machinery, and other applications.

GF..LO

GF..LO

This series of maintenance-required rod end spherical plain bearings is designed for hydraulic components and suitable for welding. Each unit consists of a GE..LO radial spherical plain bearing and a rod end housing fitted with a lubrication hole or grease nipple. Dimensions: bore diameter d = 20–110 mm; width B = 20–110 mm. See the catalog for other dimensions. Basic dynamic load rating C = 30–655 kN; basic static load rating C₀ = 74–1,490 kN; weight 0.36–49 kg. Sealed -2RS versions are also available.

GE..ES

GE..ES

GE..ES series radial spherical plain bearings (standard series) feature a split outer ring and a spherical inner ring. They can support radial loads and some axial loads. Suitable for applications requiring maintenance, they are also available with seals on both sides (2RS type). A wide range of bore sizes is available, from 4 mm to 260 mm, to meet different load requirements. Dynamic and static load ratings increase with bearing size. These bearings are widely used in hydraulic components, construction machinery, automation equipment, and other applications.

GEG Series Radial Spherical Plain Bearings

GEG Series Radial Spherical Plain Bearings

This series comprises single-split radial spherical plain bearings (medium series). Models beginning with GEG use the suffix ES or E (for smaller sizes) to indicate the standard type; ES-2RS sealed versions are also available (specific dimensions not listed). The outer ring is formed by extrusion and lined with a PTFE composite spherical surface, while the inner ring’s spherical surface is chrome-plated. These bearings are self-lubricating and suitable for radial loads and certain axial loads. Size range: bore diameter d = 4–260 mm, outer diameter D = 14–400 mm, width B = 7–205 mm, dynamic load rating 3.4–3550 kN, static load rating 17–18,000 kN, and contact angle 12°–21°. They are widely used in construction machinery, hydraulic cylinders, automation equipment, and other applications.

GEBK...S

GEBK...S

The GEBK...S series comprises radial spherical plain bearings with a PTFE liner, designed for heavy loads and low-speed or oscillating motion. They offer self-lubrication, low friction, and wear resistance. Size range: 5–30 mm bore diameter, 16–66 mm outside diameter, 8–37 mm inner ring width, and 6–25 mm outer ring width. They support radial loads, with dynamic load ratings of 3.3–63 kN, static load ratings of 7.8–148 kN, and tilt angles of 6–16°. The series is available in a variety of sizes to suit different installation requirements.

Self-Lubricating Radial Spherical Plain Bearings

Self-Lubricating Radial Spherical Plain Bearings

The self-lubricating radial spherical plain bearing series (GE...C) is maintenance-free and uses self-lubricating materials. It is suitable for low-speed oscillating or tilting motion. Bore diameters range from 4 to 30 mm, outside diameters from 12 to 47 mm, and widths from 5 to 22 mm. Rated dynamic loads range from 2.1 to 65 kN, and static loads from 5.4 to 166 kN. Made of bearing steel, these bearings have contact angles of 6–16°. They are widely used in construction machinery, automation equipment, and agricultural machinery.

GE...UK-2RS

GE...UK-2RS

This series consists of self-lubricating radial spherical plain bearings. The outer ring has a single axial split, and the inner ring has cylindrical extensions at both ends. The 2RS type has seals at both ends, lubrication grooves and oil holes, and phosphated component surfaces. These bearings are suitable for combined radial and axial loads and can accommodate misalignment. Bore diameters range from 15 to 80 mm, with load capacities from a few kN to several hundred kN.

GE...FW-2RS

GE...FW-2RS

The GE...FW-2RS series self-lubricating radial spherical plain bearings feature a single axial slot in the outer ring and seals on both sides. PTFE fabric bonded to the outer ring’s spherical surface provides maintenance-free self-lubrication. The inner ring’s spherical surface is chrome-plated for improved wear resistance. These bearings are suited to low-speed, heavy-load applications where maintenance-free operation is required, such as construction machinery, metallurgical equipment, and automated production lines. Size range: 15–100 mm bore diameter, 30–160 mm outside diameter, 13–21 mm inner ring width, and a fixed 12 mm outer ring width. Available in a range of sizes, these sealed bearings offer good dust protection.

GEZ...ES radial spherical plain bearing series

GEZ...ES radial spherical plain bearing series

This series comprises self-lubricating radial spherical plain bearings in inch sizes. The inner ring has a chrome-plated spherical surface, while the outer ring has a PTFE fabric liner. Both sides are fitted with seals (-2RS type). These bearings are wear-resistant and maintenance-free. The model designation begins with GEZ, followed by a number indicating the bore size; ES denotes the standard version, and -2RS indicates seals on both sides. A range of sizes is available, with bore diameters from 12.7 mm to 84.5 mm and outside diameters from 22.225 mm to 187.325 mm. They are suitable for low-speed, heavy-load or oscillating applications.

Self-Lubricating Radial Spherical Plain Bearings, GE...LO Series

Self-Lubricating Radial Spherical Plain Bearings, GE...LO Series

The GE...LO series comprises self-lubricating radial spherical plain bearings with a split outer ring and cylindrical extensions at both ends of the inner ring. Both rings feature lubrication grooves and oil holes, and their surfaces are phosphated to provide self-lubricating properties. These bearings are suitable for oscillating motion under heavy radial and axial loads and are commonly used in construction machinery, hydraulic cylinders, and automation equipment. The series is available in a range of sizes to suit different installation requirements.