Model · Self-Lubricating Rod End Spherical Plain Bearing Series
Self-Lubricating Rod End Spherical Plain Bearing Series
This series of self-lubricating rod end spherical plain bearings is available in two configurations: female thread (S...T/K) and male thread (SA...T/K). The sliding contact surface is steel against PTFE composite material, requiring no maintenance. The rod end body is made of carbon steel with an environmentally friendly white zinc coating; the outer ring is bronze, and the inner ring is bearing steel with a hardened spherical surface coated in hard chromium. These bearings offer high load capacity, easy installation and removal, and simplified mechanisms. Size range: 5–50 mm bore. Stainless steel versions are available on request (add S before the model number).
Overview
This series of self-lubricating rod end spherical plain bearings is available in two configurations: female thread (S...T/K) and male thread (SA...T/K). The sliding contact surface is steel against PTFE composite material, requiring no maintenance. The rod end body is made of carbon steel with an environmentally friendly white zinc coating; the outer ring is bronze, and the inner ring is bearing steel with a hardened spherical surface coated in hard chromium. These bearings offer high load capacity, easy installation and removal, and simplified mechanisms. Size range: 5–50 mm bore. Stainless steel versions are available on request (add S before the model number).
Product category: Bearings / Spherical Plain Bearings / Rod End Spherical Plain Bearings
Models & specifications
| Model / Name | Weight (kg) | B_mm | C1_max_mm | L1_max_mm | L4_max_mm | L5_max_mm | Rss_min_mm | W_mm | A deg | D2 max (mm) | D4 (mm) | D5 (mm) | D (mm) | Dk (mm) | Dynamic kN | H1 (mm) | Static kN | thread | B (mm) | Maximum C1 (mm) | Maximum L1 (mm) | Maximum L4 (mm) | Maximum L5 (mm) | Minimum Rss (mm) | W (mm) | Angle a (deg) | Maximum d2 (mm) | d4 (mm) | d5 (mm) | d (mm) | dk (mm) | Dynamic load rating (kN) | h1 (mm) | Static load rating (kN) | Thread | Weight (kg) | Minimum L1 (mm) | Maximum L2 (mm) | Maximum angle a (deg) | Minimum angle a (deg) | h (mm) | Minimum angle (deg) | Maximum angle (deg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S15T/K S15T/K | 0.016 | 8 | 6 | 10 | 36 | 4 | 0.3 | 9 | 13 | 18 | 8.5 | 11 | 5 | 11.11 | 5.7 | 27 | 6 | M5×0.8 | |||||||||||||||||||||||||
| S16T/K S16T/K | 0.022 | 9 | 6.75 | 12 | 40 | 5 | 0.3 | 11 | 13 | 20 | 10 | 13 | 6 | 12.7 | 7.2 | 30 | 7.65 | M6×1.0 | |||||||||||||||||||||||||
| S18T/K S18T/K | 0.047 | 12 | 9 | 16 | 48 | 5 | 0.3 | 14 | 14 | 24 | 12.5 | 16 | 8 | 15.875 | 11.6 | 36 | 12.9 | M8×1.25 | |||||||||||||||||||||||||
| S110T/K S110T/K | 0.077 | 14 | 10.5 | 20 | 57 | 6.5 | 0.3 | 17 | 13 | 28 | 15 | 19 | 10 | 19.05 | 14.5 | 43 | 18 | M10×1.5 | |||||||||||||||||||||||||
| S110T/K-1 S110T/K-1 | 0.077 | 14 | 10.5 | 20 | 57 | 6.5 | 0.3 | 17 | 13 | 28 | 15 | 19 | 10 | 19.05 | 14.5 | 43 | 18 | M10×1.25 | |||||||||||||||||||||||||
| S112T/K S112T/K | 0.1 | 16 | 12 | 22 | 66 | 6.5 | 0.3 | 19 | 13 | 32 | 17.5 | 22 | 12 | 22.225 | 17 | 50 | 24 | M12×1.75 | |||||||||||||||||||||||||
| S112T/K-1 S112T/K-1 | 0.1 | 16 | 12 | 22 | 66 | 6.5 | 0.3 | 19 | 13 | 32 | 17.5 | 22 | 12 | 22.225 | 17 | 50 | 24 | M12×1.25 | |||||||||||||||||||||||||
| S114T/K S114T/K | 0.16 | 19 | 13.5 | 25 | 75 | 8 | 0.3 | 22 | 16 | 36 | 20 | 25 | 14 | 25.4 | 24 | 57 | 31 | M14×2.0 | |||||||||||||||||||||||||
| S114T/K-1 S114T/K-1 | 0.16 | 19 | 13.5 | 25 | 75 | 8 | 0.3 | 22 | 16 | 36 | 20 | 25 | 14 | 25.4 | 24 | 57 | 31 | M14×1.5 | |||||||||||||||||||||||||
| S116T/K S116T/K | 0.22 | 21 | 15 | 28 | 85 | 8 | 0.3 | 22 | 15 | 42 | 22 | 27 | 16 | 28.575 | 28.5 | 64 | 39 | M16×2.0 | |||||||||||||||||||||||||
| S116T/K-1 S116T/K-1 | 0.22 | 21 | 15 | 28 | 85 | 8 | 0.3 | 22 | 15 | 42 | 22 | 27 | 16 | 28.575 | 28.5 | 64 | 39 | M16×1.5 | |||||||||||||||||||||||||
| S118T/K S118T/K | 0.32 | 23 | 16.5 | 32 | 93 | 10 | 0.3 | 27 | 15 | 46 | 25 | 31 | 18 | 31.75 | 42.5 | 71 | 47.5 | M18×1.5 | |||||||||||||||||||||||||
| S120T/K S120T/K | 0.42 | 25 | 18 | 33 | 102 | 10 | 0.3 | 30 | 14 | 50 | 27.5 | 34 | 20 | 34.925 | 42.5 | 77 | 57 | M20×1.5 | |||||||||||||||||||||||||
| S122T/K S122T/K | 28 | 20 | 37 | 111 | 12 | 0.3 | 32 | 15 | 54 | 30 | 38 | 22 | 38.1 | 57 | 84 | 68 | M22×1.5 | 0.54 | |||||||||||||||||||||||||
| S125T/K S125T/K | 31 | 22 | 42 | 124 | 12 | 0.3 | 36 | 15 | 60 | 33.5 | 42 | 25 | 42.85 | 68 | 94 | 85 | M24×2 | 0.72 | |||||||||||||||||||||||||
| S128T/K S128T/K | 35 | 24 | 51 | 136 | 14 | 0.3 | 41 | 15 | 66 | 37 | 46 | 28 | 47.6 | 86 | 103 | 107 | M27×2 | 0.82 | |||||||||||||||||||||||||
| S130T/K S130T/K | 37 | 25 | 51 | 145 | 15 | 0.3 | 41 | 17 | 70 | 40 | 50 | 30 | 50.8 | 88 | 110 | 114 | M30×2 | 1.1 | |||||||||||||||||||||||||
| S130T/K-1 S130T/K-1 | 37 | 25 | 51 | 145 | 15 | 0.3 | 41 | 17 | 70 | 40 | 50 | 30 | 50.8 | 88 | 110 | 114 | M27×2 | 1.1 | |||||||||||||||||||||||||
| S135T/K S135T/K | 43 | 28 | 56 | 165.5 | 17 | 0.3 | 50 | 16 | 81 | 46 | 58 | 35 | 57.1 | 125 | M36×2 | 1.6 | |||||||||||||||||||||||||||
| S140T/K S140T/K | 49 | 33 | 60 | 187.5 | 19 | 1 | 55 | 17 | 91 | 53 | 65 | 40 | 66.6 | 142 | M42×2 | 2.4 | |||||||||||||||||||||||||||
| S150T/K S150T/K | 60 | 45 | 65 | 218.5 | 23 | 1 | 65 | 12 | 117 | 65 | 75 | 50 | 82.5 | 160 | M48×2 | 5 | |||||||||||||||||||||||||||
| SA5T/K SA5T/K | 8 | 6 | 18 | 5 | 11.11 | 5.7 | 6 | M5×0.8 | 0.013 | 19 | 42 | 13 | 0.3 | 33 | |||||||||||||||||||||||||||||
| SA6T/K SA6T/K | 9 | 6.75 | 20 | 6 | 12.7 | 7.2 | 7.65 | M6×1.0 | 0.02 | 21 | 46 | 13 | 0.3 | 36 | |||||||||||||||||||||||||||||
| SA8T/K SA8T/K | 12 | 9 | 24 | 8 | 15.875 | 11.6 | 12.9 | M8×1.25 | 0.038 | 25 | 54 | 14 | 0.3 | 42 | |||||||||||||||||||||||||||||
| SA10T/K SA10T/K | 14 | 10.5 | 28 | 10 | 19.05 | 14.5 | 18 | M10×1.5 | 0.055 | 28 | 62 | 13 | 0.3 | 48 | |||||||||||||||||||||||||||||
| SA12T/K SA12T/K | 16 | 12 | 32 | 12 | 22.225 | 17 | 24 | M12×1.75 | 0.85 | 32 | 70 | 13 | 0.3 | 54 | |||||||||||||||||||||||||||||
| SA14T/K SA14T/K | 19 | 13.5 | 36 | 14 | 25.4 | 24 | 31 | M14×2.0 | 0.14 | 36 | 78 | 16 | 0.3 | 60 | |||||||||||||||||||||||||||||
| SA16T/K SA16T/K | 21 | 15 | 42 | 16 | 28.575 | 28.5 | 39 | M16×2.0 | 0.21 | 37 | 87 | 15 | 0.3 | 66 | |||||||||||||||||||||||||||||
| SA18T/K SA18T/K | 23 | 16.5 | 46 | 18 | 31.75 | 42.5 | 47.5 | M18×1.5 | 0.29 | 41 | 94 | 15 | 72 | 0.3 | |||||||||||||||||||||||||||||
| SA20T/K SA20T/K | 25 | 18 | 50 | 20 | 34.925 | 42.5 | 57 | M20×1.5 | 0.38 | 45 | 103 | 78 | 0.3 | 14 | |||||||||||||||||||||||||||||
| SA22T/K SA22T/K | 28 | 20 | 54 | 22 | 38.1 | 57 | 68 | M22×1.5 | 0.48 | 48 | 111 | 84 | 0.3 | 15 | |||||||||||||||||||||||||||||
| SA25T/K SA25T/K | 31 | 22 | 60 | 25 | 42.85 | 68 | 85 | M24×2 | 0.64 | 55 | 124 | 94 | 0.3 | 15 | |||||||||||||||||||||||||||||
| SA28T/K SA28T/K | 35 | 24 | 66 | 28 | 47.6 | 86 | 107 | M27×2 | 0.8 | 62 | 136 | 103 | 0.3 | 15 | |||||||||||||||||||||||||||||
| SA30T/K SA30T/K | 37 | 25 | 70 | 30 | 50.8 | 88 | 114 | M30×2 | 1.1 | 66 | 145 | 110 | 0.3 | 17 | |||||||||||||||||||||||||||||
| SA35T/K SA35T/K | 43 | 28 | 81 | 35 | 57.1 | M36×2 | 1.64 | 85 | 180.5 | 140 | 0.3 | 16 | |||||||||||||||||||||||||||||||
| SA40T/K SA40T/K | 49 | 33 | 91 | 40 | 66.6 | M42×2 | 2.4 | 90 | 195.5 | 150 | 1 | 17 | |||||||||||||||||||||||||||||||
| SA50T/K SA50T/K | 60 | 45 | 117 | 50 | 82.5 | M48×2 | 4.8 | 105 | 243.5 | 185 | 1 | 12 |
