Rod End Bearings

POS Male-Threaded Lined Rod End Spherical Plain Bearing Series
The POS series of male-threaded lined rod end spherical plain bearings features carbon steel rod ends with an environmentally friendly zinc-plated protective coating. The sliding surfaces are lined with bronze, and the inner ring (ball) is made of bearing steel with a hard-chrome-plated spherical surface. Lubrication is available through a grease nipple or the rod end. These bearings offer high axial load capacity and are easy to install and remove. Size range: bore diameter d from 5 mm to 30 mm; thread sizes from M5×0.8 to M30×2. Left-hand threads (add L to the end of the model number) and stainless steel construction (add S to the beginning of the model number) are available to order. Dynamic load: 3.25–64 kN; static load: 5.7–88.6 kN; weight: 0.013–1.1 kg.

SI...ES Series
E-series rod end spherical plain bearings are available in two types: female-threaded (SI...ES) and male-threaded (SA...ES). They are assembled from a rod end body and a GE...E or GE...ES series radial spherical plain bearing. The rod end body is made of forged carbon steel with an environmentally friendly white zinc plating. Lubrication is provided through a grease nipple or the rod end eye. The steel-on-steel sliding contact surfaces offer high load capacity, easy installation and removal, and a simplified design. Models range from SIS5E to SIS80ES and SA5E to SA80ES, with bore diameters of 5–80 mm and thread sizes from M5×0.8 to M64×4. Left-hand threads are also available. These bearings are suitable for mechanical linkages, automation equipment, and other applications requiring oscillating or tilting motion.

SI..PK
The SI..PK series comprises steel-on-steel rod end spherical plain bearings. The outer ring is formed by extrusion, the spherical surface is lined with SF1 material, and the inner ring's spherical surface is chrome-plated. Each bearing has an extended shank with a slotted thread, available in left- or right-hand versions. The rod end body is zinc-plated or blackened. The sliding contact surface uses a steel/PTFE composite, making the bearing maintenance-free. These bearings offer high load capacity and are easy to install and remove. The static load range is 170–4,900 kgf, and weights range from 10 to 380 g. Suitable for automation equipment, mechanical linkages, and similar applications.

SQ Series Single-Ball Rod End Bearings
SQ Series single-ball rod end bearings feature a ball housing with an “L”-shaped projecting shank and an internal thread. The ball housing is made of zinc-based alloy, and the threads are available in left- and right-hand versions. Right-hand threads are supplied as standard; left-hand threads must be specified by adding “L” to the model designation. These bearings are available with a seal (suffix -RS) or without a seal (suffix omitted). A range of bore sizes is available from 5 mm to 22 mm, with thread sizes from M5×0.8 to M22×1.5. Overall lengths range from 29 to 95 mm, and weights are approximately 0.026–0.713 kg. Suitable for automation equipment, mechanical linkages, and other applications involving frequent oscillation and radial loads, they offer a compact design, easy installation, and good wear resistance.

GK...CK
The GK...CK series comprises maintenance-required rod end spherical plain bearings for hydraulic components, with an internal thread and locknut. The rod end body is available with a left- or right-hand internal thread and consists of a GE...LO radial spherical plain bearing and a rod end housing with a clamping slot and set screw. The rod end housing has a lubrication hole or grease nipple. The series is available with bore diameters from 12 mm to 125 mm, thread sizes from M12×1.25 to M100×3.0, dynamic loads from 10.8 kN to 950 kN, and static loads from 24.5 kN to 1,430 kN. The model designation follows the format GK[bore diameter]CK, for example, GK 12 CK. Add “L” to models with a left-hand thread, such as GKLL 12 CK. Models marked with an asterisk (GK 12 CK*) cannot be lubricated. Suitable for power-transmission connections in hydraulic systems.

GF...DO Series Rod End Spherical Plain Bearings
The GF...DO series comprises rod end spherical plain bearings for hydraulic components that require welding during maintenance. The rod end housing has a weldable base and locating pin, and consists of a GE...ES or GE...ES 2RS radial spherical plain bearing and a rod end housing. The housing has a lubrication hole or grease nipple for lubrication. Sealed -2RS versions are also available, such as the GF70 DO-2RS. Bore diameters range from 20 mm to 120 mm. These bearings withstand high dynamic and static loads and are suitable for hydraulic cylinders, construction machinery, and other applications.

GF..LO
This series of maintenance-required rod end spherical plain bearings is designed for hydraulic components and suitable for welding. Each unit consists of a GE..LO radial spherical plain bearing and a rod end housing fitted with a lubrication hole or grease nipple. Dimensions: bore diameter d = 20–110 mm; width B = 20–110 mm. See the catalog for other dimensions. Basic dynamic load rating C = 30–655 kN; basic static load rating C₀ = 74–1,490 kN; weight 0.36–49 kg. Sealed -2RS versions are also available.