Fasteners

BLT-086 Series Lifting Rings

BLT-086 Series Lifting Rings

BLT-086 series lifting hooks are designed for industrial lifting and hoisting operations. With working load limits ranging from 0.75 to 60 tonnes, the series is available in 10 sizes. Made from high-strength alloy steel, these products offer a high safety factor and excellent wear resistance. Dimensions are specified across multiple parameters to ensure installation compatibility. Suitable for connection to a wide range of lifting equipment, wire ropes, and chains.

BLT-087 Series Lifting Eye Bolts

BLT-087 Series Lifting Eye Bolts

BLT-087 series lifting eye bolts have a working load limit of 0.75 to 35 tonnes and are designed for lifting and hoisting operations. Made from high-strength alloy steel, they are available in a range of sizes to suit different load capacities. Each eye bolt is marked with its rated load for safe use. Net weights range from 0.5 kg to 47.6 kg, while dimensions such as mounting hole diameter, outer diameter and height increase with load capacity. This series meets industry standards and is widely used for lifting in factories, ports, mines and other settings.

BLT081 Side-Pull Swivel Hoist Ring

BLT081 Side-Pull Swivel Hoist Ring

The BLT081 series side-pull swivel hoist ring features a metric thread and a working load limit of 10–22.5 tonnes. Thread sizes range from M42×4.5 to M64×6.0, with a safety factor of 4.1. Dimensions include E, A, B, C, D, F, G, L, N, S and SW. Tightening torque is 350–800 Nm (500–1,000 Nm for larger sizes), and net weight is 6.3–18 kg. Bolt length and thread size can be customized. The ring is available in two configurations: B (large structural components) and S (small structural components). Designed for heavy-duty lifting, it delivers high reliability and safety.

BLT082 Heavy-Duty Swivel Hoist Ring

BLT082 Heavy-Duty Swivel Hoist Ring

The BLT082 series of swivel hoist rings has working load limits from 0.5 to 9 tonnes and is available with metric threads from M8 to M36S and UNC threads from 1/2 to 1-1/4. It swivels 360° and pivots through a 180° load range, with a safety factor of 4.1. Bolt lengths and thread specifications can be customized. Available in B type (large body) and S type (small body), the series offers a range of sizes and load ratings for lifting applications.

BLT083 Swivel Hoist Ring

BLT083 Swivel Hoist Ring

The BLT083 series swivel hoist rings are made of high-strength alloy steel and have a safety factor of 4:1. They rotate 360° and tilt 230°. Available with metric (M8–M150) and imperial (5/16–4) threads, they have working load limits from 0.4 t to 50 t. Choose from standard (S) and heavy-duty (B) designs to suit different lifting requirements. Tightening torque ranges from 10 to 1,700 Nm, depending on the size. Ideal for lifting and hoisting applications in the mold, machinery, automotive, and other industries.

BLT092 Series Weld-On Lifting Lugs

BLT092 Series Weld-On Lifting Lugs

BLT092 Series Grade 80 weld-on lifting lugs (weld-on D-rings) feature metric threads and a design safety factor of 4:1, with working load limits ranging from 4T to 31.5T. The series includes five sizes: BLT092-04 (4T), BLT092-06 (6.7T), BLT092-10 (10T), BLT092-16 (16T), and BLT092-30 (31.5T). Dimensions include A, B, C, D, E, F, L, M, HV, and a. Net weights range from 1.1 kg to 5.7 kg (data for BLT092-30 is incomplete). Welding must be carried out by qualified welders in accordance with EN 287 or AWS standards. Suitable for lifting angles from 0° to 60° and for use with single- or multi-leg slings.

BLT094 Series Eye Bolts

BLT094 Series Eye Bolts

BLT094 series swivel eye bolts feature metric threads from M8 to M48 and working load limits of 0.3 to 12 tonnes, with 360° rotation. Forged from high-quality alloy steel, they comply with DIN EN 1677-1 and feature Grade 10.9 bolts and a safety factor of 4.1. Suitable for various load angles, they are available in a full range of sizes. Bolt lengths and thread specifications can be customized, and each product is traceable.

BLT095 Concrete Precast Element Lifting Point

BLT095 Concrete Precast Element Lifting Point

The BLT095 series concrete precast element lifting points have a 4:1 safety factor and are designed for lifting concrete precast elements. Made from high-strength materials, they feature 360-degree swivel capability and can handle heavy loads. Available in a range of sizes, with working load limits from 1.3 to 32 tonnes and complete dimensional specifications to suit different operating conditions. Product code format: BLT095-working load in tonnes-maximum load in tonnes. For example, BLT095-1-1.3 indicates a 1.3-tonne working load.

BLT098 Series Lifting Eye

BLT098 Series Lifting Eye

The BLT098 series comprises swivel lifting eyes for heavy-duty lifting, with working load limits ranging from 85 to 2,100 tonnes. Made from high-strength alloy steel, these products are available with multiple thread specifications (M42×4.5 or M48×5.0) to suit different lifting angles and sling-leg configurations. Dimensions (A, B, C, D and E) increase with load capacity to ensure structural strength. With a maximum capacity of 2,100 tonnes, the series meets the demands of lifting large, heavy loads. These lifting eyes are widely used in shipbuilding, heavy industry, mining and other heavy-lifting applications.

BLT118 Safety Swivel Hoist Ring

BLT118 Safety Swivel Hoist Ring

The BLT118 series safety swivel hoist rings are made of high-quality alloy steel and have a safety factor of 4.1. They are suitable for vertical, side, and multi-angle lifting. Available with a range of metric (M6–M64) and UNC (5/16–2-1/2) thread sizes, they have working load limits from 0.2 to 22.5 tons. Their compact design and smooth rotation make them ideal for industrial lifting applications involving molds, machinery, and automation equipment. Bolt length and thread specifications can be customized to customer requirements. For the M36 size, both a standard (S-type) and a large (B-type) design are available.

PTA Series Precision Motion Ball Screw

PTA Series Precision Motion Ball Screw

Materials: Body: S45C; balls: SUJ2. Hardness: Body: HRC 35°; balls: HRC 62°.

SSAC-V Series Low-Profile Square Rail

SSAC-C Series Low-Assembly Flange Slider

XR-A Series Axial Locking Nuts

Type A uses a three-point axial locking method. Its thickness is the same as that of the F series, and it is suitable for demanding special environmental conditions. Applications: machine tool spindles, ball screw support bearings, precision spindles, precision measuring instruments, and more.

XR12 Series Motor Integrated Base

This page features the XR12 Series Motor Integrated Base, including a parts list, product structure diagrams (XR12-57 Series / XR12-60 Series), and a technical specifications table.

JF Series Precision Locknuts

JF Series Precision Locknuts

JF Series Precision Locknuts provide axial positioning for bearings on shafts. Their evenly spaced copper locking pins are pressed against the shaft threads by hex-head set screws to prevent loosening. Four locking options are available: F (thread-ring locking), R (radial locking), A (axial locking), and K (clamping). They can compensate for mounting deviations. Thread sizes range from M8 to M200, with axial load capacities from 30 kN to 1,340 kN; loosening torque increases with size. They are easy to install and remove, require no additional locking washers or grooves, and maintain their precision even after repeated removal and reinstallation.

F-Series Thread-Flank Locking Nut

F-Series Thread-Flank Locking Nut

F-series thread-flank locking nuts feature locking inserts positioned at a 30° angle to the threads. They do not apply axial loads to the threads. When the nut is tightened, the thread flanks are not relieved of axial load, and the nut does not deform. The three equally spaced locking inserts can be adjusted to compensate for misalignment of other components mounted on the shaft. Precision is maintained even after repeated installation and removal. Material: 42CrMo/S45C; hardness: HRC 28°–32°; thread tolerance: ISO 4H; face runout: 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M300. Product model numbers begin with FM, followed by the thread size. Multiple sizes are available, including M12 to M68.

R Series

R Series

R Series radial locking nuts use a radial locking mechanism and have a slim profile, making them suitable for installations with limited space. Made from 42CrMo or S45C, they have a hardness of HRC 28°–32° and an ISO 4H thread tolerance. Face runout: 0.002–0.005 mm for M6–M200 and 0.005–0.008 mm for M210–M300. They securely retain precision bearings and prevent loosening. Sizes range from M5×0.5 to M270×4.0.

Axial Locking Nut Series A

Axial Locking Nut Series A

The Axial Locking Nut Series A uses an axial locking method and has the same thickness as Series F. It is suitable for applications where design or assembly constraints prevent the use of other products. Made from 42CrMo or S45C, it has a hardness of HRC 28°–32° and an ISO 4H thread tolerance. Face runout is 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M300. A range of thread sizes is available, from M12×1.0 to M90×2.0, with outer diameters (D) from 30 mm to 120 mm and heights (h) from 14 mm to 26 mm. Each nut is supplied with locking screws, with maximum tightening torques ranging from 3.5 Nm to 18 Nm. These nuts are widely used to secure and preload precision bearings, helping ensure stable operation.

K-Series Tightening Locknuts

K-Series Tightening Locknuts

K-type locknuts use 4–8 high-strength bolts to lock through axial deformation. They are suitable for harsh working environments, applications prone to loosening, and situations requiring high torque. The nut’s runout accuracy can be adjusted by varying the tightening force of the axial screws. Materials: 42CrMo or S45C; hardness: HRC 28°–32°; thread accuracy: ISO 4H. Face runout: 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M300. The table lists AM-series thread specifications, with outer diameters from 95 mm to 300 mm and pitches from 2.0 mm to 4.0 mm, along with dimensions such as bolt holes, threaded holes, and maximum torque.

KM Series Locknuts

KM Series Locknuts

KM series locknuts, also known as round nuts, are used to secure bearings or other components on a shaft in the axial direction. A comprehensive range is available, from KM12 to KM300, with nominal thread diameters from 12 mm to 300 mm and pitches from 1.0 to 4.0 mm. The outer diameter D ranges from 26 mm to 340 mm, and the height h from 15 mm to 43 mm. The nuts have multiple axial locking screw holes; tightening the screws prevents loosening. The maximum permissible torque increases with size, ranging from a minimum of 2.5 N·m to a maximum of 35 N·m. Suitable for securing bearings and positioning components axially in a wide range of machinery, these locknuts comply with DIN 981.

DN Series Square Lock Nuts

DN Series Square Lock Nuts

This series of square lock nuts is designed for bearing support housings. The internal threads and end faces are machined simultaneously to ensure assembly accuracy. Made from 42CrMo or S45C, the nuts have a hardness of HRC 28°–32°, thread tolerance class ISO 4H, and face runout of ≤0.005 mm. A range of metric thread sizes is available (M5×0.5 to M40×1.5), with outer diameters of 12.5–60 mm, inner diameters of 10–48 mm, heights of 5–25 mm, widths (L) of 2.7–18 mm, and T dimensions of 11–50 mm. Custom non-standard nuts are available.

KMT Series Locknuts

KMT Series Locknuts

KMT series locknuts are made of S45C steel, with a hardness of HRC 28°–32°, thread tolerance class ISO 4H, and face runout of 0.002–0.005 mm (M10–M200). Designed to secure machine-tool spindles and lead-screw bearings, they can be operated with a standard open-end wrench. Two subseries are available: KMT, with thread sizes from M10×0.75 to M140×2.0, and KMTA, from M20×1.0 to M200×3.0. The boss height is 2 mm for M35 and smaller, and 3 mm for M40 and larger. Custom non-standard nuts are available.

KMTA Series Locknuts

KMTA Series Locknuts

KMTA series locknuts are made of S45C steel with a hardness of HRC 28°–32°. Thread tolerance is ISO 4H, and face runout for sizes M20–M200 is 0.002–0.005 mm. They are commonly used to secure machine tool spindles and ball screw bearings. Sizes range from M20×1.0 to M200×3.0, with custom non-standard nuts available. Tighten with a standard open-end wrench. The boss height is 2 mm for M35 and smaller, and 3 mm for M40 and larger. The fixture holes have a positive tolerance.

KMK Series Precision Locknuts

KMK Series Precision Locknuts

KMK Series precision locknuts feature a threaded wedge embedded in the bore, which locks the nut in position on a shaft or sleeve. They are used to locate bearings in less demanding applications. Do not use them on shafts or sleeves with keyways. Sizes range from M10×0.75 to M100×2.0, with outside diameters of 20–130 mm, bore diameters of 16–122 mm, heights of 9–20 mm, slot widths of 3–10 mm, slot depths of 2–4 mm, locking screws from M5 to M10, and maximum torques of 4.5–35 Nm. Custom, non-standard nuts are available.

K Series

K Series

The K Series is a range of locknuts that includes models such as BKC01. Made from 42CrMo/S45C, it has a perpendicularity tolerance of 0.005 mm. Designed for precision machinery, these locknuts must be installed and removed according to the relevant precautions to ensure reliable bearing retention.

FA Series Locknut

FA Series Locknut

FA Series locknuts are used to secure precision bearings. Made from 42CrMo/S45C steel, they offer a perpendicularity tolerance of 0.005. They are suitable for threaded shafts in a range of sizes, including the K, R, DN, A, and F series. During installation, use a hook spanner or torque wrench to tighten to the specified torque. Before removal, loosen the locking screw, then gently tap to release the locking pin.

Precision locking nuts

Precision locking nuts

This series of precision locking nuts features a locking-pin design. Three phosphor bronze locking pins, evenly spaced around the circumference, provide axial positioning. Locking is achieved through friction between the pins and the shaft threads, as well as friction between the thread flanks; the pins do not bear axial loads. Multiple locking methods are available: F toothed locking, R radial locking, A axial locking, K clamping, E radial locking, and DN radial locking. The nuts are available for thread sizes from M8 to M200, with various axial load capacities and flat-point set-screw tightening torques. Types F and R are adjustable to keep the nut perpendicular to the shaft and compensate for mounting errors. The phosphor bronze locking pins minimize nut deformation, allowing repeated assembly and disassembly without loss of precision.

F-Series F-Type Locknuts

F-Series F-Type Locknuts

F-type locknuts feature a 30° locking steel design, do not withstand axial loads, and can be repeatedly disassembled and reassembled without losing precision. Made from 42CrMo steel, they have a hardness of HRC 28°–32° and an ISO 4H thread tolerance. Face runout is 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M450. Available in a range of metric thread sizes from M12 to M55, with pitches of 1.0, 1.5, and 2.0. Outer diameters range from 30 mm to 75 mm, heights from 14 mm to 22 mm, and inner diameters from 25 mm to 68 mm. Each nut has three locking steel elements and locking screws, with a maximum torque of 8–18 Nm. Suitable for precision machinery fastening, bearing locking, and similar applications.

Thread-Flank Locking Nut F Series

Thread-Flank Locking Nut F Series

The Thread-Flank Locking Nut F Series is designed for mechanical fastening and features a thread-flank design for reliable locking. The range includes multiple sizes, from R6 to R282, covering dimensions from 16 mm to 562 mm to meet the locking requirements of different shaft diameters. The products share consistent weight and torque specifications and are suitable for a wide range of industrial equipment. See the product catalog for detailed specifications.

A-Series Axial Locking Nuts

A-Series Axial Locking Nuts

A-series axial locking nuts provide axial positioning and secure fastening to prevent loosening. Suitable for fastening applications in mechanical assemblies.

K-Type Lock Nut

K-Type Lock Nut

K-type lock nuts use 3–8 high-strength bolts to lock the threads through axial deformation. They are suitable for harsh operating environments, applications prone to loosening, and situations requiring high torque. Runout precision can be adjusted by varying the tightening force applied to the axial bolts. Made from 42CrMo or S45C, they have a hardness of HRC 28°–32° and a thread tolerance of ISO 4H. Face runout: 0.002–0.005 mm for M16–M200; 0.005–0.008 mm for M210–M300. A range of sizes from M16 to M60 is available, with pitches of 1.0, 1.5, or 2.0 mm and maximum torque of 4.5 Nm, meeting a variety of application requirements.

E-Type Locknut

E-Type Locknut

E-type locknuts use a symmetrical two-point locking design. The locking sections are cut through the threads, distributing the load across the entire thread profile for excellent resistance to loosening. Available in 42CrMo and S45C steel, they have a hardness of HRC 28°–32°, an ISO 4H thread tolerance, and end-face runout of 0.002–0.005 mm. The range includes various thread sizes from M22 × 1.5 to M150 × 2.0. Detailed specifications include outer diameter (D), inner diameter (d), height (h), groove dimensions (n × g), thickness (t), and locking screw size (M), along with unlocking torque and maximum axial load. Suitable for high-strength fastening applications requiring reliable resistance to loosening.

DN Series Locknuts

DN Series Locknuts

The DN Series locknuts include DN-type and E-type nuts. They feature a symmetrical two-point locking design and fully cut threads, with the entire thread profile bearing the load for excellent resistance to loosening. Made from 42CrMo or S45C, they have a hardness of HRC 28°–32°, an ISO 4H thread tolerance, and face runout of 0.002–0.005 mm. DN-type nuts are available in thread sizes from M5 to M40, with models DN5 through DN40. E-type nuts are available in thread sizes from M22 to M150 and provide high locking torque and axial load capacity, making them suitable for precision fastening applications.

Lock Nuts

Lock Nuts

This series of lock nuts secures the ends of ball screws or drive shafts to prevent loosening. The fine-pitch thread design offers 0.01 mm precision. Models range from RN4 (M4x0.5) to RN40 (M40x1.5), with outside diameters from 11.5 mm to 62 mm and inside diameters from 5 mm to 48 mm. The nuts feature raised bosses: models M3–M8 have one boss, while M10–M40 have two. They come with hex socket set screws and lock washers for secure installation. Suitable for securing shaft ends in precision mechanical drive systems.

XYFL Series Countersunk Hole Type

XYFL Series Countersunk Hole Type

XYFL Series countersunk-hole nuts are an economical option for general industrial fastening needs. Available in a range of materials and surface finishes: XYFL02 features a brushed SUS201 finish; XYFL11 is made of SUS304 with an electropolished finish; XYFL12 has a brushed finish; XYFL13 has a ground and polished finish; and the material for XYFL16 is unspecified. The nuts feature a countersunk-hole design, with 4-hole and 6-hole mounting options. A wide range of sizes is available, with load capacities from a few kilograms up to 30 kg. Their low reference weight makes them suitable for light-duty fastening applications.

XYH Series Stud Bolts

XYH Series Stud Bolts

The XYH Series stud bolts are heavy-duty fasteners made of 304 stainless steel with a polished finish. Designed for fastening connections in industrial machinery and equipment, they offer excellent corrosion resistance and load-bearing capacity. Available models include XYH1040-5-Z, XYH1050-6-Z, and XYH1060-6-Z to meet a range of size requirements.

R-Type/F-Type Locknuts

R-Type/F-Type Locknuts

R-type and F-type locknuts are precision locking devices manufactured by KAKA for axially positioning bearings and other components on shafts. They feature three locking pins evenly spaced around the circumference, which are pressed against the shaft threads by hex-socket flat-point screws to prevent the nut from rotating. The locking pins and threads are machined in a single operation; the pins have a thread profile and lock by friction, without carrying axial loads. F-type nuts are adjustable and can be used to correct misalignment between a support surface and an adjacent component. The thread tolerance is 4H precision-machined grade, with a perpendicularity accuracy of 0.005 mm. They are made from high-strength steel (42CrMo, 45#, 40Cr), with a hardness of HRC 28°–32° and a phosphate-coated surface. The locking pins are made of phosphor bronze, and the flat-point screws are grade 12.9. They are easy to install and can be repeatedly assembled and disassembled without loss of precision. The product range covers various thread sizes from M8 to M200, with axial load capacities of 30–1,340 kN. Corresponding tightening torque data is available.

R-Type Precision Locknut

R-Type Precision Locknut

KAKA R-type precision locknuts use a three-point radial locking system and have a slim profile, making them suitable for installations with limited space. The locking ring is perpendicular to the male thread; excessive tightening torque may reduce the axial load. Materials include 42CrMo, 45Cr, and 40Cr. Thread tolerance: ISO 4H; hardness: HRC 28°–32°; face runout: ≤0.005 mm (standard) or ≤0.002 mm (precision-ground). Common applications include machine-tool spindles, ball-screw support bearings, precision spindles, and precision measuring equipment.

XR-RN Series Nuts

XR-RN Series Nuts

XR-RN series precision locknuts are available for M4 to M10 threads, with pitches including 0.5P, 0.75P, 1.0P, and 1.5P. The nuts have outer diameters of 11.5–19 mm, inner diameters of 8–15 mm, and lengths of 5–8 mm. Square flange sizes range from 10 × 10 to 16 × 16 mm, and each nut is supplied with a matching set screw. Made from high-quality steel, these nuts are widely used for axial positioning and preventing loosening on ball screws, mechanical drive shafts, and other components.

XR-R Series Nuts

XR-R Series Nuts

XR-R series nuts are slotted round lock nuts available in a range of thread diameters and pitches from M6 to M80. They are suitable for mechanical fastening and applications requiring resistance to loosening. The nuts have outer diameters (D) from 16 mm to 105 mm, inner diameters (d) from 12 mm to 98 mm, thicknesses (B) from 3 mm to 8 mm, lengths (L) from 8 mm to 18 mm, and slot widths (S) of either 0.5 mm or 1 mm. Each nut has three evenly spaced mounting holes, with sizes ranging from M4 to M8. Made from carbon steel or stainless steel, the products can be surface-treated.

XR-F Series Locking Nuts

XR-F Series Locking Nuts

F-type locking nuts feature a 30° thread design that prevents the locking interface from carrying axial loads applied to the threads. When the nut is tightened, the thread surfaces are not subjected to axial loads, and the nut does not deform. Tightening three nuts at intervals can be used to adjust the alignment of other components to be mounted on the shaft. Applications include machine-tool spindles, ball screw support bearings, precision spindles, and precision measuring instruments. This series is available in a range of metric fine-thread sizes, with diameters D of 38–105 mm and heights of 16–24 mm, and is suitable for high-precision axial positioning.

RN Series Heavy-Duty Locknuts

RN Series Heavy-Duty Locknuts

RN Series heavy-duty locknuts feature a black oxide, electroless nickel-plated, or sulfide surface finish, delivering high precision and load capacity. They integrate seamlessly with WBK and SBK support units and motor mounts, making them ideal for tight installation spaces. They are widely used in heavy-duty CNC machine tools, laser equipment, and other applications. The series includes models RN17W to RN40W (including -N versions) and RNW-F17 to RNW-F40, with custom designs available.

Heavy-duty toothed locknut

Heavy-duty toothed locknut

This series of heavy-duty toothed locknuts features anti-corrosion surface treatments: black oxide and electroless plating for the RN series, or black oxide and sulfurizing for the RNW-F series. The products offer high precision and load-bearing capacity, and fit seamlessly with WBK and SBK support units and motor mounts. Their design helps overcome limited installation space. They are widely used in heavy-duty CNC machine tools, laser equipment, and other applications. A range of models is available, with custom specifications supported. Key dimensions include thickness L, boss height E, outer diameter D, inner diameter d (RNW-F series only), mounting thread M, hole diameter Y, counterbore depth R, pitch circle diameter PCD, and thread specification G.

K-Series Locking Nuts

K-Series Locking Nuts

K-series locking nuts use four to six high-strength bolts. Axial deformation locks the threads, making them suitable for harsh operating conditions, applications prone to loosening, and situations requiring high torque. The nut's runout precision can be adjusted by changing the tightening force of the axial screws. Applications include machine-tool spindles, ball-screw support bearings, precision spindles, and precision measuring instruments. Materials: 42CrMo, 45# and 40Cr; hardness: HRC 28–32; face runout: ≤0.005 mm. Available in a range of thread sizes from M18×1.5 to M80×2.0, with outer diameters of 38–110 mm, heights of 18–32 mm, and maximum torque of 3.5–8 Nm.

KMT Series Heavy-Duty Lock Nut

KMT Series Heavy-Duty Lock Nut

KMT Series heavy-duty lock nuts feature four circumferential slots. Nuts size 15 and smaller have two opposing flats and can be tightened with a standard wrench. Available in 42CrMo, 45# and 40Cr, they offer ISO 4H thread accuracy, hardness of HRC 28°–32°, and face runout of ≤0.005 mm. Designed for high precision, easy installation and secure locking. Twelve sizes are available, from M25×1.0 to M80×2.0. Parameters include outside diameters d1 and D, wrench slot d, inside diameter d2, thickness h, slot depth g, slot width t, thread diameter M and maximum tightening torque MAX.Nm.

Type A locknut

Type A locknut

Type A locknuts use an axial three-point locking mechanism and have the same thickness as the F series. They are suitable for assemblies subject to special environmental constraints. Applications include machine-tool spindles, ball-screw support bearings, precision spindles, and precision measurement equipment. Materials include 42CrMo, 45# steel, or 40Cr. Thread tolerance class: ISO 4H; hardness: HRC 28°–32°; face runout: ≤0.005 mm. A range of thread sizes is available from M12×1.0 to M80×2.0. Outer diameter, thickness, number of slots, and other parameters vary by model.

F-Series Lock Nuts

F-Series Lock Nuts

F-series lock nuts have the same thickness as Type A nuts and are suitable for machine-tool spindles, ball-screw support bearings, precision spindles, precision measuring equipment, and similar applications. They use an axial three-point locking mechanism, making them suitable for applications with special assembly constraints. Available materials include 42CrMo, 45 steel, and 40Cr. Thread tolerance: ISO 4H; hardness: HRC 28–32; face runout: ≤0.005 mm.