product — Page 2

2M Series Timing Belts
Jaguar (Shenma Transmission) 2M series timing belts are toothed drive belts that mesh with pulleys for synchronous, slip-free transmission. They are widely used in automation equipment, packaging machinery, printers, and small speed-reduction drives. The catalog provides tooth profile diagrams and model designation details to guide selection. The key parameters are tooth profile (pitch), tooth count, and pitch length: the 2M type has a 2mm pitch, the 3M type has a 3mm pitch, and the XH type has a 22.225mm pitch (imperial tooth profile). Models are designated as “pitch length code-tooth profile code.” For example, 240-2M is a 2M profile timing belt with a pitch length of 240mm, while 300-3M is a 3M profile timing belt with a pitch length of 300mm. Belt width is specified separately by a width code; common widths include 3.5mm and 10mm. The same pitch length may be available in different widths and with different tooth counts. Catalog examples cover common sizes with pitch lengths of 81~744mm and tooth counts of 27~372. Standard items are regularly stocked for short lead times and can be selected and ordered directly by pitch length and tooth profile.

2MS-N Series Two-Phase Stepper Motors
The 2MS-N series consists of two-phase hybrid stepper motors with dual-shaft designs and a uniform step angle of 1.8° (200 full steps per revolution). Three mounting flange sizes are available: □28, □35, and □42. The series is divided into four motor compatibility groups, A, B, C, and D. Motors within the same group can replace equivalent products from Taiwanese and Japanese manufacturers, including SANYO, making it easier to balance cost and performance. Key specifications include a rated current of 0.67~1.68A, frame sizes from □28×31.3 to □42×47, a maximum energized holding torque of 0.06~0.44 N·m, and rotor inertia of 0.12×10⁻⁴~0.9×10⁻⁴ kg·m². All models can be paired with optional stepper drives such as the GTR22G-D. They are suitable for small linear modules, dispensing machines, inspection platforms, feeding mechanisms, and other automation applications requiring position holding and high torque at low speeds.

2P Series Fluid Control Valves (2-Port, 2-Position)
The 2P series consists of direct-acting, normally closed, 2-port, 2-position solenoid valves that switch quickly and responsively when energized. They are compact, small, lightweight, and easy to install and remove. The orifice diameter is 2.5mm, the Cv value is 0.23, and port sizes are G1/8 (2P025-06) and G1/4 (2P025-08). Suitable media include air, water, and oil, with a fluid viscosity below 20CST. Operating pressure is 0-0.7MPa, proof pressure is 1.05MPa, and valve response time is less than 0.03 seconds. The body is made of nylon 66 and the seals are VITON. The valve uses a 2P025 solenoid coil and supports AC 50/60Hz and DC. The allowable voltage range is ±10%~±15%, power consumption is 7.0VA, insulation is Class B, and the socket diameter is Φ35. The coil is rated IP65 and is available with terminal or lead-wire connections.

2Q Series Solenoid Valves
The 2Q series consists of direct-acting two-way solenoid valves suitable for air, water, oil, gas and other media. The body is made of brass, and the seal is made of polytetrafluoroethylene (PTFE). The operating temperature range is -5~100℃, and the fluid viscosity must be below 50CST. The operating pressure is 0~7MPa, the maximum pressure rating is 10.5MPa, and the control pressure is 3~6MPa. The valves are available in three flow orifice sizes: 22, 35 and 50mm, with corresponding Cv values of 12, 24 and 48. Port sizes include 3/4", 1", 1-1/2" and 2", with control port sizes of 2-G1/8" or 2-G1/4". Contact the manufacturer for custom voltages and specifications.

2S Series 2/2-Way Solenoid Valves
The 2S series 2/2-way solenoid valves are available in direct-acting and stroke-limit switch versions. Key models include 2S-040-10, 2S-200-20, and 2S-200-20D. Designed for pneumatic control systems, they switch fluid flow on and off. Their compact construction and fast response make them widely used in automation equipment and industrial piping systems.

2S Series Solenoid Valves
The 2S series consists of two-way solenoid valves with stainless steel bodies and stainless steel seals, as specified in the catalog. They are designed for on/off control of water, air, and other media in piping systems requiring corrosion resistance. The sizes listed on this page are 25-08 and 25-10 (corresponding to the common 08 and 10 port size categories). The nominal maximum working pressure column lists values including 3, 4, and 0.5MPa, indicating that the series covers pressure ratings from low-pressure air lines to medium-pressure liquid lines. Confirm the appropriate rating for the actual medium and pressure when selecting a valve. Both the body and seals are stainless steel, helping reduce corrosion of internal components and extend service life. The valves have a two-position, two-way, normally closed design: they open when energized and close when de-energized. They can be installed horizontally or vertically in the pipeline. The model column is missing from the scanned table, so refer to the product label or complete catalog for the exact model code. Multiple coil voltages, wiring methods, and connection thread sizes are also available within the series and must be specified when ordering.

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)
The 2S series comprises direct-acting, 2-port, 2-position solenoid valves with one inlet and one outlet. The solenoid coil directly actuates the valve element, allowing the valve to open at zero differential pressure without pilot pressure. These valves provide on/off control for neutral fluids such as air, water and oil. The direct-acting design ensures reliable operation even at low inlet pressures or under vacuum, with fast response, simple construction and easy maintenance. Valve bodies are typically made of brass or engineering plastic, with NBR/EPDM seals to suit different media. The series offers multiple flow orifice and connection sizes, with connection sizes from M5 to 2". The typical operating pressure range is 0~1.0MPa (up to 1.5MPa for some sizes), and the medium temperature range is approximately -5~80℃ (up to 185℃ for high-temperature versions). Common coil voltages are DC12V/DC24V/AC110V/AC220V, with an allowable voltage fluctuation of ±10%. These valves are widely used for fluid on/off control in automation equipment, water treatment, packaging machinery, medical devices and pneumatic control systems. When selecting a valve, confirm the medium, connection size, flow orifice size (Cv value), operating differential pressure and coil voltage. Contact the manufacturer for custom voltages or specifications.

2V/2P Series 2-Position, 2-Way Solenoid Valve
The 2V/2P series 2-position, 2-way solenoid valve features direct-acting operation and is suitable for compressed air filtered to 40 microns. The series includes two types, 2V and 2P, with orifice sizes of 010 (1.0 mm) and 025 (2.5 mm). Port sizes are available in M5, 1/8 in. (06), and 1/4 in. (08). The operating pressure is 0–8.0 kgf/cm², and the operating temperature is -5 to 50°C. It has an IP65 protection rating and terminal-style wiring. A wide range of voltages is supported: 12/24 V DC and 24/36/110/220/380 V AC (50/60 Hz). Power consumption is low: 2.0 VA at 220 V AC and 3.0 W at 24 V DC. The maximum operating frequency is 10 cycles per second, and the insulation class is F.

2V Series 2-Way, 2-Position Solenoid Valves
The 2V series of 2-way, 2-position solenoid valves includes the 2V025, 2V130 and 2V250 subseries, all normally closed. The direct-acting 2V025 is lightweight and compact, with fast, responsive switching. It has a Φ2.5mm orifice, a CV value of 0.23, PT1/8 and PT1/4 port sizes, and an operating pressure of 0-1.0MPa. The diaphragm pilot-operated 2V130 and 2V250 offer low power consumption and high flow rates. Their respective orifice diameters are Φ13mm and Φ25mm, CV values are 6.20 and 13.00, port sizes are PT3/8 and PT1/2 for the 2V130 and PT3/4 and PT1 for the 2V250, and operating pressure is 0.05-1.0MPa. The valve bodies are nickel-plated brass. The 2V025 uses VITON fluoroelastomer seals, while the 2V130 and 2V250 use NBR seals. The valves have a class B heat resistance rating, a proof pressure of 1.5MPa and a response time of less than 0.05 seconds. Suitable media include air, water and oil. PT threads are standard, with NPT and G threads available as options. Electrical connections are available in DIN connector or lead wire configurations, with a range of standard voltages.

2V Series 2-Position, 2-Way Solenoid Valves
The 2V series consists of 2-position, 2-way, direct-acting, normally closed solenoid valves for air, water, and oil, with an operating pressure range of 0-1.0MPa (0-145psi). Three sizes are available by flow orifice diameter: 2V025 (2.5mm, Cv 0.23), 2V130 (13.0mm, Cv 6.20), and 2V250 (25.0mm, Cv 13.00), with port sizes from PT1/8 to PT1. The valves are direct-acting and normally closed, providing on/off control for a variety of fluid lines. DIN connector and lead-wire versions are available to suit different installation requirements. They are widely used in automated equipment, water, air, and oil lines, and general industrial fluid control applications.

2W/2P Series 2-Way, 2-Position Fluid Control Valves
The 2W/2P series 2-way, 2-position fluid control valves are direct-acting, normally closed solenoid valves for on/off control of air, water, oil, steam, and other media in pipelines. The 2P series (2P025-06, 2P025-08) has a nylon 66 body, VITON seals, a 2.5mm flow orifice, a Cv value of 0.23, G1/8 and G1/4 port sizes, and a response time below 0.03 seconds. Its coil has Class B insulation and IP65 protection, with direct wire leads for electrical connection. The 2W series (2W025~2W500) has a brass body and NBR or VITON oil seals, with flow orifices from 2.5~50mm, Cv values of 2.3~76, and port sizes of 1/8"~2". Its operating pressure is 0~0.7MPa, maximum proof pressure is 1.0MPa, operating temperature is -5~100℃, and voltage tolerance is ±10%. These valves switch quickly, have a compact, small design, and are easy to install and remove. They are widely used for automated fluid pipeline control.

2W Series 2/2-Way Solenoid Valve
The 2W Series direct-acting 2/2-way solenoid valve is designed for low-pressure fluid control, with air, water, oil, and gas as suitable media. The valve body is made of brass, and the seal is available in NBR, EPDM, or VITON. The operating pressure range is 0–7 kgf/cm², the maximum pressure is 10 kgf/cm², and the operating temperature range is -10 to 80°C. Various orifice sizes (2.5 mm, 4.0 mm, and 16 mm) and port sizes (1/8", 1/4", 1/2", etc.) are available. Choose a normally closed or normally open configuration, with AC 110 V or AC 220 V options.

2W Series Solenoid Valves
2W series solenoid valves are suitable for a range of media, including air, water, oil, and gas. They are widely used in automation, water treatment, and petrochemical applications. The series is available in multiple port sizes, including 2W160-10, 2W160-15, 2W200-20, 2W250-25, 2W350-35, 2W400-40, and 2W500-50, to meet different flow requirements. The compact valve body operates reliably and enables remote on/off control.

2W Series 2-Port, 2-Position Solenoid Valve
The 2W series consists of normally closed, 2-port, 2-position solenoid valves for on/off control of fluids such as air, water, and oil. The catalog identifies the series with the specification code 2W and provides a symbol table explaining the model code positions: the first position is the specification code 2W (2-port, 2-position, normally closed), followed in order by the flow orifice diameter (Φmm), working medium, operating method, and type. These sections are written together to form the complete model number. When selecting a valve, use the flow orifice diameter to determine the nominal bore and flow capacity, then select the appropriate code positions based on the working medium (air, water, oil, etc.), operating method (direct-acting, pilot-operated, etc.), and mounting type. The OCR text on this page is severely degraded and repetitive; only the specification code 2W and flow orifice code 160 can be clearly identified. The available values for the remaining positions (working medium, operating method, and type) were not fully preserved in the source and must be supplemented from the complete catalog page before model codes can be assembled. This entry should not be used as a complete selection reference at this time.

2WH Series 2-Way Solenoid Valve (High-Pressure Direct-Acting)
The 2WH Series comprises high-pressure, direct-acting 2-way solenoid valves suitable for air, water, oil, gas, and other media. The operating pressure range is 0–7 bar, with a maximum pressure rating of 10 bar and an operating temperature range of -10 to 80°C. The body is made of brass, and the seal is available in NBR, EPDM, or VITON. These valves feature a direct-acting, normally closed design, offering a simple construction and fast response. They are suitable for automation applications requiring direct operation under high pressure.

30 Series Bridge-Type Cable Carrier
This series of 30 Series bridge-type cable carriers includes two styles: inner-opening (WSL21N) and outer-opening (WSL21W). Made of reinforced nylon PA6+GF30, the carriers are black and rated for temperatures from -20°C to 120°C. The inner width is 30 mm, the outer height is 40 mm, and the outer width is 54 mm. Choose from bend radii of R38 or R55. The number of links per meter depends on the pitch. Cable carrier connectors are sold as a complete set (moving end + fixed end). Suitable for protecting cables on automation equipment.

30 Series Cable Carriers
30 Series cable carriers are engineering-plastic cable protection chains available in three types: all-black open, all-black enclosed, and quiet enclosed. Made from PA6+GF30 (or PA6+GFR30), they have a black finish and an operating temperature range of -20°C to 120°C. Lightweight, with a short pitch, they offer wear and corrosion resistance and quiet operation, making them suitable for fast cable routing in high-speed applications. Links per meter = 1000 ÷ pitch. Cable carrier end brackets are sold as a set (moving end + fixed end). A range of inner widths, bend radii, and styles is available to suit different applications.

300M Series Base
The 300M Series Base is a mounting base for 300 Series sub-base valves, providing air-line connections and mechanical support. Made of aluminum alloy, it features a compact design and can be configured with any number of stations to suit different valve assembly requirements. Overall dimensions vary depending on the number of stations. See the dimension table for details, including key dimensions such as width A, length B, and height H. Its rated pressure is suitable for low-pressure pneumatic systems. Standardized mounting holes and port specifications make integration easy.
33 Series Miniature Nylon Casters
33 Series miniature nylon casters feature injection-molded polypropylene wheels with a bearing-free design. They offer impact resistance, easy rolling, resistance to delamination, and strong resistance to acids, alkalis, corrosion, and chemicals. The brackets are assembled with high-strength steel rivets and blue zinc-plated, with single- and double-raceway designs available for furniture, electronics, and other lightweight equipment. Models include rigid, swivel, threaded stem, and threaded stem with brake casters. Wheel diameters range from 25~75mm, wheel widths from 12~29mm, mounting heights from 36~95mm, and load capacities from 12~58kg per caster. Mounting dimensions, including the base plate, mounting holes, and M8×15 threaded stem, vary by specification. Bracket configurations include swivel, rigid, side brake, threaded stem, threaded stem with brake, stem, and stem with brake. The wheels are made of PP, and brackets are available with zinc-plated or electrophoretic finishes, with custom colors also available.
33 Series Miniature Rubber Casters
33 Series miniature rubber casters feature wheels molded from vulcanized recycled rubber. They offer good elasticity, strong insulating properties and quiet operation, and do not damage floors during use. They are suitable for lightweight equipment in the furniture and electronics industries. The brackets are stamped from high-strength steel rivets and zinc-plated for corrosion resistance. Single- and double-raceway designs are available, with fixed, swivel and swivel side-brake configurations, as well as threaded stem, threaded stem with brake, stem and stem with brake mounting options. Wheel diameters are 25, 30, 40, 50, 63 and 75mm, with wheel widths of 12~29mm, mounting heights of 33~95mm and load capacities of 12~58kg per wheel. Fixed and swivel mounting plates are available in different sizes (such as 37*19 fixed / 38*32 swivel). Mounting hole spacing and diameter vary by specification. Bracket colors and wheel materials and colors are optional.
33 Series Miniature Polyurethane Casters
The 33 Series is Luban Caster's range of miniature polyurethane casters. The wheel tread is integrally molded from a new high-strength polyurethane material, offering wear resistance, shock absorption, quiet operation, resistance to oil and dirt, and floor protection. The casters roll smoothly and easily. The wheels are secured to the brackets with high-strength rivets, and the brackets have a corrosion-resistant blue zinc-plated finish. Single- and double-raceway designs are available, with a choice of fixed or swivel mounting. The series has a bearing-free design, a load capacity of approximately 12-58kg, a typical wheel diameter of 80mm, wheel widths of 25mm or 30mm, and a mounting hole diameter of 4.1mm. These casters are primarily suited to short-distance movement and turning of light-duty equipment such as furniture, electronic equipment, and display fixtures. Representative models listed in the catalog are 3301-80C and 3311-80C. Users can select a model based on wheel width, mounting dimensions (fixed 37*19 / swivel 38*32 or fixed 29*13 / swivel 30*24), and load requirements.
33 Series Miniature TPR Resilient Casters
The 33 Series miniature TPR resilient casters are designed for furniture, electronics, and other light-duty equipment. Made from imported TPR, the wheels are wear-resistant, quiet, shock-absorbing, floor-friendly, environmentally friendly, colorfast, and suitable for high-speed operation. The rounded tread makes pushing easier, while the dual-bearing, anti-entanglement wheel core ensures smoother operation. The bracket features a double-raceway design with a reinforced central steel rivet, precision steel balls, and corrosion-resistant electroplated magnetic steel. Load capacity per wheel ranges from 13~25kg, with wheel diameters of 25mm, 32mm, and 38mm, widths of 13~17mm, and mounting heights of 39~53mm. Fixed, swivel, and swivel-with-wheel versions are available, along with optional side-brake, threaded-stem, threaded-stem with brake, plug-stem, and plug-stem with brake brackets. Brackets are available in zinc-plated or electrophoretic finishes, with any color available by custom order.

35 Series
35 Series low-noise bridge-type cable carrier, made of PA6+GF30, black, and suitable for temperatures from -20°C to 120°C. The carrier opens on both sides for quick, easy cable routing. Its short pitch and light weight help reduce operating noise (depending on speed). It offers excellent wear and corrosion resistance, making it especially suitable for high-speed applications. The number of links per meter is calculated based on the pitch. Cable carrier connectors are sold as a complete set, including the moving-end and fixed-end connectors. Example order: WSL06J-35-50-R75L + length (in meters or number of links) + connector model.

Shenma 35 Series (06C) Standard Sprocket
The Shenma 35 Series (06C) standard sprocket is designed for 3/8-inch pitch (06C) roller chains. Its tooth profile conforms to 06C chain specifications, with a pitch P of 9.525mm, roller diameter DR of 5.08mm, inner plate width W of 4.78mm, and tooth thickness T of 4mm. It is suitable for light-duty drives, conveyor lines, packaging machinery, and small automation equipment. Select a sprocket based on parameters such as tooth count, outside diameter, hub diameter, overall thickness, bore diameter, and weight.

395 Series Round Containers
The 395 Series round containers are used for pressure setting and piping connections in pneumatic systems. Models include 395.211, 395.251, 395.261, 395.281 and 395.291, with bore sizes of 6, 8, 10, 15, 20 and 25 mm and pipe connections of G1/8, G1/4, G3/8, G1/2, G3/4 and G1. All models have a set pressure range of 0.05–1.0 MPa, a maximum working pressure of 1.0 MPa, and an ambient and medium temperature range of 0–+50℃. The dimensional table provides installation and connection dimensions A/B/C/D/E/F/G/J/K/L/V to support selection by bore size, port thread and available installation space.

396 Series Lubricators
The 396 series lubricator is a pneumatic air preparation component that atomizes lubricating oil and carries it with compressed air to downstream pneumatic equipment to lubricate moving parts. The series is available in six port sizes: 6, 8, 10, 15, 20, and 25 mm, with corresponding G1/8, G1/4, G3/8, G1/2, G3/4, and G1 connection threads. Bowl capacities are 40, 120, and 300 cm³, the maximum operating pressure is 1.0 MPa, and the ambient and medium temperature range is 0~+50℃. Before installation, blow the piping clean with air. Pipe fittings and vertical installation are recommended to ensure a stable oil mist output.

397 Series Filter Regulators
397 series filter regulators combine a filter and a pressure regulator to filter and regulate the air supply in pneumatic lines. Bore sizes range from 6~25 mm, with connection threads from G1/8~G1, a pressure setting range of 0.05~1.0 MPa, a maximum working pressure of 1.0 MPa, and bowl capacities of 40/120/300 cm³. The ambient and media temperature range is 0~+50℃. Depending on the model, filtration ratings include 50-75 μm, 25-50 μm, 10-25 μm, and 5-10 μm. Before installation, blow out the piping, use suitable fittings, and install the unit vertically wherever possible.

398 Series Air Filter Combination
The 398 Series air filter combination integrates an air filter, a pressure reducing valve (pressure regulator), and a lubricator into a three-piece air preparation unit. It filters and cleans compressed air, regulates pressure, and provides oil mist lubrication. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit should be installed vertically. The entire series has a pressure adjustment range of 0.05~1.0MPa, a maximum working pressure of 1.0MPa, and an ambient and media temperature range of 0~+50℃. The standard filter pore size is 50~75μm, with 25~50μm, 10~25μm, and 5~10μm options. Six connection pipe sizes are available: 6, 8, 10, 15, 20, and 25mm, corresponding to G1/8", G1/4", G3/8", G1/2", G3/4", and G1" threads. Overall and mounting dimensions A, B, C, D, E, F, Z, G, V, N, and M are provided to facilitate piping and bracket layout.

399 Series Air Filter Combination
The 399 series air filter combination (three-piece air preparation unit) consists of an air filter, pressure regulator and lubricator. It filters compressed air, regulates pressure and provides oil mist lubrication in compressed air lines. Connection sizes are 6mm, 8mm, 10mm, 15mm, 20mm and 25mm, corresponding to G1/8"~G1" threads. The pressure setting range is 0.05~1.0MPa, the maximum working pressure is 1.0MPa, and the ambient and medium temperature range is 0~+50℃. The standard filtration rating is 50~75μm; precision filter elements rated 25~50μm, 10~25μm and 5~10μm are also available. The valve body comes in three sizes according to port size, with M30×1.5, M50×1.5 and M67×1.5 mounting threads. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit must be installed vertically.

3A/4A Series Air-Controlled Valves
The 3A/4A series consists of pneumatic directional control valves, including 3A 3-port, 2-position valves; 4A 5-port, 2-position valves; 3H 3-port, 3-position valves; 4H 5-port, 3-position valves; and 3R/4R series manually operated valves. Valve bodies are available in the 100, 200, 300, 400, 1000/2000/3000/4000, and 10000/20000/30000/40000 series sizes, with various air control methods, port sizes, and initial states, such as NO (normally open). They are suitable for directional switching and pilot control in pneumatic circuits on automated equipment. Model numbers combine the series code, series size, air control method, port size, initial state, and other fields. Confirm both the port size and control method when selecting a model.

3A Series Solenoid Valves
The 3A series comprises two-position, three-way, internally piloted solenoid valves designed for compressed air filtered to 40 microns. The operating pressure range is 0.15–0.8 kgf/cm², and the operating temperature range is -5 to 50°C. The maximum switching frequency is 5 cycles per second, with a minimum energization time of 0.05 seconds. The series includes four basic sizes: 100, 200, 300, and 400. It offers single-solenoid, two-position and double-solenoid, two-position configurations, with port sizes ranging from M5 and PT1/8 to PT1/4, PT3/8, and PT1/2. The initial position is available as normally closed (NC) or normally open (NO). Effective sectional area varies by series and specification, from 5.5 mm² to 50 mm². These valves are widely used in automated pneumatic control systems.

3A100 Series 3-Port, 2-Position Air-Operated Valves
The 3A100 series consists of externally piloted 3-port, 2-position air-operated valves with a spool design for reliable sealing and responsive operation. Double-piloted models have a memory function. The specially machined bore reduces friction and starting pressure, extends service life, and requires no lubrication. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.8MPa (21~114psi), the pressure retention/proof pressure is 1.2MPa, and the operating temperature is -20~70℃. The body is made of aluminum alloy, and the maximum operating frequency is 5 cycles/second under no load. Port sizes are M5 and PT1/8 (06). Basic models include 3A110 (2-position, single-piloted) and 3A120 (2-position, air-operated). G and NPT port threads are available; leave the thread code blank for M5 ports. The valves can be mounted in multiple orientations and integrated with a manifold to save installation space.

3A200 Series Air-Operated Valves
The 3A200 series comprises 3-port, 2-position externally air-operated valves for directional control in pneumatic circuits using compressed air. The working medium must be filtered through a filter rated 40μm or above. Port sizes are PT1/8 and PT1/4, with an effective area of 14.0~16.0mm² and corresponding Cv values of 0.76~0.69. The operating pressure range is 0.15~0.8MPa, the proof pressure is 1.2MPa, and the operating temperature range is -20~70℃. The body is made of aluminum alloy, the maximum operating frequency is 5 cycles/second, and no lubrication is required. Standard models include 3A210-06, 3A220-06, 3A210-08, and 3A220-08. Their compact design makes them suitable for pneumatic circuit control in automated equipment.

3A300 Series Air-Operated Valves (3-Port, 2-Position)
The 3A300 series consists of 3-port, 2-position externally air-operated directional valves. External pilot air pressure shifts the valve spool, making these valves suitable for dusty or damp environments and applications where solenoid coils are unsuitable. The valve body is made of copper alloy, and the working medium is compressed air filtered through a 40μm or finer filter. Lubrication is not required; if lubrication is used, it must be supplied continuously, with ISO VG32 or equivalent oil recommended. The operating pressure range is 0.15~0.8MPa (21~114psi), proof pressure is 1.2MPa (175psi), effective area is 25.0mm² (Cv=1.39), maximum operating frequency is 5 cycles/second (no load), and operating temperature is -20~70℃. Port sizes are available in -08 (PT1/4) and -10 (PT3/8), with G or NPT threads optional. Common models include 3A310-08, 3A220-08, 3A310-10, and 3A320-10. They are widely used for cylinder directional control, blow-off and waste removal, and pneumatic control on automated production lines.

3GT Series Timing Pulleys
High-molybdenum 3GT timing pulley with a 3GT tooth profile, designed for 3GT timing belts. Made of stainless steel, with an optional flange. Available in a range of bore diameters and widths for precision drive applications.

3H/4H Series Hand Lever Valves
The 3H/4H series hand lever valves are manually operated directional control valves for pneumatic control systems. The 3H is a three-port, two-position valve (three-position, three-way), while the 4H is a five-port, two-position valve (two-position, five-way). The series is available in 100, 200, 300, and 400 sizes, corresponding to different flow capacities. The position code is fixed at 10 (single/double position). Port sizes are G1/8, G1/4, G3/8, and G1/2, represented by codes 06, 08, 10, and 15, respectively. The working medium is compressed air. These valves are widely used to switch air circuits in automation equipment.

3H Series Hand-Operated Valve
The 3H series hand-operated valve is a manually operated, direct-acting, two-port, two-position pneumatic valve. Its spool is driven directly by hand to switch airflow on and off. The working medium is air filtered through a screen rated at approximately 40μm or above; no lubrication is required. Port sizes include G1/8, G1/4, G3/8 and G1/2, with effective flow areas of 14.0~50.0mm² (Cv 0.78~2.79) to suit different flow requirements. The operating pressure range is 0~0.8MPa (0~114psi), proof pressure is 1.2MPa (170psi), and operating temperature is -50~60℃. The body is made of aluminum alloy. G and NPT port threads are available. The valve is suitable for manual switching, exhaust and commissioning in various pneumatic control circuits.

3L/4L Series Hand-Pull Valves
The 3L/4L Series Hand-Pull Valve is a manually operated pneumatic directional control valve used to control airflow and switch flow direction. The 3L is a 3-port, 2-position valve, while the 4L is a 5-port, 2-position valve. The series is available in four sizes—100, 200, 300, and 400—with different valve body dimensions and flow rates. Connection sizes include G1/8", G1/4", G3/8", and G1/2". The position code is fixed at 10 (single/double position). The valve body is made of aluminum alloy for easy operation and reliable sealing. These valves are widely used for manual control in automation equipment and pneumatic systems.

3M Series 3M
3M-series polyurethane timing belts with a 3 mm pitch and trapezoidal teeth. Available in lengths from 105 to 843 mm, with 35 to 281 teeth. Designed for high-precision drive systems, they are wear-resistant, quiet, and maintenance-free, with no lubrication required. Widely used in automation equipment, CNC machine tools, packaging machinery, printing machinery, and other applications.

3M toothed timing belt
The 3M toothed timing belt has a 3 mm pitch and a curvilinear tooth profile, making it suitable for low-power precision drives. It offers low noise and high transmission efficiency, with smooth engagement between the belt teeth and pulleys. The series is available in a range of pitch lengths from 90 mm to 1,063 mm, with 30 to 356 teeth to suit different center distances. It is widely used in office automation equipment, medical devices, textile machinery, packaging machinery, and more.

3M Timing Pulley
Tongcheng (Shenma Transmission) 3M timing pulleys are a standard B-type series designed for 3M curvilinear-tooth timing belts with a 3 mm pitch. Pulley specifications include tooth count, tooth outside diameter D0, pitch diameter, tooth-edge outside diameter D0, tooth height H and bore diameter B. Various bore sizes are available. These pulleys are commonly used in compact precision drives, office equipment, packaging machinery and automation systems. Precision-finished tooth surfaces ensure smooth belt engagement, an accurate transmission ratio and low noise. Select the pulley by tooth count and required bore diameter B; customization is available to suit the shaft diameter and installation space.

3M Timing Belt
The 3M timing belt is a curvilinear tooth (HTD) belt in Shenma Transmission's “Jaguar” series. With a 3.0mm pitch, it is designed for light-load, high-speed drives. Its flat back and wear-resistant tooth surface make it suitable for synchronous drives in office equipment, printers, packaging machinery, and small automation equipment. Models are designated by “pitch length-model”; for example, 300-3M is a 3M belt with a pitch length of 300mm. Pitch length = number of teeth × 3mm. The catalog lists pitch lengths from 81mm (27 teeth) to 3390mm. The complete ordering code has three parts: pitch length code, model (pitch code 3M), and belt width code. For example, 670-5M-15 specifies a pitch length of 670mm, a 5M model (5.00mm pitch), and a belt width of 15.0mm. For this series, the format is “pitch length-3M-belt width code”. Jaguar timing belts are regularly stocked and can ship as early as the same day.

3R/4R Series Hand-Pull and Hand-Rotary Valves
The 3R/4R series hand-pull and hand-rotary valves are manually operated pneumatic control valves used to open, close, or redirect airflow. Hand-pull valve models include 3R210-08, 3R310-10, 4R210-08, and 4R310-10, with port sizes of 1/4 and 3/8. Hand-rotary valve models include K34R6-08A, K34R6-08D, and K34R6-08S, with a G1/4 port size. These valves are suitable for pneumatic circuits without electrical power or requiring manual intervention, and can control cylinder movement and airflow. Compact and easy to operate, they are commonly used in automated equipment, fixtures, and packaging machinery.

3R Series Hand-Pull Valve (3-Port, 2-Position)
The 3R series consists of 3-port, 2-position, direct-acting hand-pull pneumatic directional control valves for pneumatic circuits requiring manual positioning or holding. The working medium is air filtered through a 40μm or finer filter. Port sizes range from PT1/8 to PT3/8, with effective areas of 12.0~30.0mm² (Cv=0.67~1.67). Operating pressure is 0~1.0MPa, proof pressure is 1.5MPa, and operating temperature is -50~70℃. The body is made of aluminum alloy. The model designation comprises 3R, the series code, position code, port size, and thread type code. Thread options are PT, G, and NPT. Lubrication is optional; if used, ISO VG32 is recommended and lubrication must not be stopped once started.

3V/3V1/2V/2P Series Solenoid Valves
3V/3V1/2V/2P series solenoid valves control airflow and switch its direction in pneumatic control circuits. The catalog lists models including 3V110-06, 3V120-06, 3V210-08, 3V220-08, 3V310-10, 3V320-10, 3V410-15, and 3V420-15, with port sizes of 1/8, 1/4, 3/8, and 1/2 for pneumatic systems with different pipe diameters. Model codes distinguish specifications and port sizes. These valves are commonly used in automated equipment, jigs and fixtures, and general-purpose pneumatic systems. This page provides only model numbers and port sizes; confirm the voltage, valve function and number of positions, and seal material using the ordering instructions.

3V Series 3/2-Way Solenoid Valves
The 3V series 3/2-way solenoid valves are available in direct-acting and pilot-operated subseries. The direct-acting 3V1 series is designed for small port sizes and drives the spool directly for fast response. The pilot-operated 3V100/200/300/400 series uses a pilot head to control the main valve and is suitable for larger port sizes. Port sizes include 1/8", 1/4", 3/8", and 1/2". Available voltage options include DC 12 V, DC 24 V, AC 24 V, AC 36 V, AC 110 V, AC 220 V, and AC 380 V. The valves have an IP65 protection rating and Class F insulation, operate at temperatures from -5 to 50°C, and have a working pressure range of 0–8.0 kgf/cm². They are widely used in pneumatic control systems, automation equipment, and other applications.

3V Series Solenoid Valves
The 3V series consists of 3-port, 2-position (2/3-position) pneumatic solenoid valves with electrically controlled switching for directional control of air circuits in automated equipment. The catalog model code includes the specification code 3V, electrical control type (1/2/3/4 correspond to the 100/200/300/400 series, respectively), initial state (10: two-position, single-solenoid control), standard voltage, electrical connection type, and thread code. The valves are commonly available in normally closed and normally open configurations, with small port sizes such as 06 (approximately PT1/8). They accommodate standard-voltage coils and direct-lead or DIN socket connections. The valve body connects directly to the piping and is widely used with cylinders and fixtures, as well as in packaging and electronics assembly. Note that the OCR text on this page contains extensive duplication, inflated content, and misaligned columns. The meanings and available options for some code segments should be verified against the product nameplate and the manufacturer's official selection catalog.

3V Series 3-Port, 2-Position Solenoid Valves
The 3V series consists of direct-acting, normally closed 3-port, 2-position solenoid valves for air and other working media filtered through a filter rated at 40μm or above. No lubrication is required. The compact aluminum alloy valve bodies can be grouped together to save installation space, and a manual override facilitates installation and commissioning. Standard port sizes are M5 and PT1/8, with an operating pressure range of 0-0.8MPa, a proof pressure of 1.5MPa, and an orifice diameter below 0.5mm. Standard voltage options include AC220V, AC110V, AC24V, DC24V, and DC12V. The valves have an IP65 protection rating and Class B heat resistance, with DIN connector or lead-wire electrical connections. Response time is under 0.05 seconds, and the maximum operating frequency is 10 cycles/second.