Drag Chain

10 Series Cable Carriers

10 Series Cable Carriers

The 10 Series is a range of plastic cable carriers designed to protect and guide moving cables and pneumatic hoses in machine tools and automation equipment. They operate smoothly and quietly, with a service life of 10 million cycles in reciprocating tests. Cables can be installed or removed without opening the carrier. The carriers are available in non-openable and openable designs for convenient cable routing and maintenance. The series comes in three bend radii, R18, R28 and R38, with corresponding external heights H of 50, 70 and 90 mm and external widths D of 40, 50 and 60 mm. Carrier length is calculated as chain length = S/2 + K, where S is the travel distance and K = π·R + safety allowance. The corresponding K values for the three radii are 90, 120 and 150. The actual installed height is H_F = H + 14 mm (load 0.2 kg/m). Select the size based on travel distance, bend radius and available installation space, and choose the appropriate mounting method for the connectors.

15 Series Semi-Enclosed Drag Chain with Inner Opening

15 Series Semi-Enclosed Drag Chain with Inner Opening

This series of 15 Series semi-enclosed drag chains opens from the inner side. It has an internal height of 15 mm and is available in internal widths of 15 mm and 20 mm. The external height is 20 mm or 23 mm, with external widths ranging from 23 mm to 50 mm. Five bend radii are available: 28, 38, 48, 75, and 100 mm. Opening styles include semi-enclosed and inner-side opening. The connector hole spacing is 14.5 mm. Suitable for protecting cables under light loads, it is easy to install and maintain.

Series 18 Non-Openable Cable Carrier

Series 18 Non-Openable Cable Carrier

Series 18 non-openable cable carrier with an internal height of 18 mm, an internal width of 25 mm, and an external height of 23.5 mm. Available external widths: 25, 28, 35, 47, and 50 mm. Choose from bend radii of 28, 38, 48, 75, or 100 mm. Available in outward-opening and inward-opening versions, with a connector hole spacing of A = 14.5 mm. Designed to protect and guide cables and hoses in automation equipment.

Series 18 cable carrier

Series 18 cable carrier

The Series 18 cable carrier has an inner height of 18 mm, an inner width of 25 mm, and an outer height of 23.5 mm. Available outer widths are 25, 28, 35, 47, and 50 mm, and available bend radii are 28, 38, 48, 75, and 100 mm. It is available with either an outer-opening or inner-opening design, with a connector hole spacing of A = 14.5 mm. It protects and guides cables, pneumatic hoses, and other lines in automation equipment.

18 Series Lightweight Cable Carriers (BF18/QS18)

18 Series Lightweight Cable Carriers (BF18/QS18)

The 18 Series lightweight plastic cable carriers include the BF18 (semi-enclosed, non-opening and opening designs) and QS18 models. Inner height: 18mm; inner width: 18mm / 25mm; outer height: 24mm; outer width: 29mm / 36mm. The standard bend radius is R28, with R38, R48, R60 and R75 also available. Pitch: 33.5mm; 30 links per meter; weight: approximately 0.313~0.351 kg/m. The carriers run smoothly and quietly, with a tested service life of up to 10 million reciprocating cycles. The outer side plates open for easy cable inspection or replacement. Suitable for cables up to 16mm in diameter. Calculate chain length using L = S/2 + K, where K = π·R + safety allowance. Refer to the table for H, D and K values for each bend radius. Actual installation height H_F = H + 24mm (load 0.5kg/m).

Series 25 Plastic Cable Carrier

Series 25 Plastic Cable Carrier

The Series 25 plastic cable carrier has an internal height of 25 mm and is available in internal widths of 25 mm, 38 mm, 57 mm, 77 mm, and 103 mm. Its external height is 35 mm/35.5 mm, and its external width varies according to the internal width. Available bend radii (R) are 55 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, and 250 mm. Opening styles include versions that open on both sides and one-piece versions that open from the inside. Connector hole spacing A is 13 mm, 23 mm, 45 mm, or 62 mm, depending on the internal width. Designed for guiding and protecting wires and cables in automation equipment, it offers high strength, wear resistance, and excellent flexibility.

28.65.FGP One-Piece Cable Separator

28.65.FGP One-Piece Cable Separator

The 28.65.FGP one-piece cable separator is an accessory for separating cables inside the 28.65 cleanroom cable chain. It significantly reduces installation time compared with conventional horizontal and vertical dividers. It measures 69 mm wide and 38.5 mm high and has 8 cable openings, with opening sizes A(5×14 mm), B(14×14.5 mm), and C(14×14.5 mm). The separator can be used on its own to divide the internal space in light-load, short-travel applications, or combined with medium-duty/heavy-duty support rails to separate and support cables and pneumatic hoses inside the chain. The catalog recommends 12~18 separators per meter. It is compatible with the 28.65 cable chain.

28.65 Series Cleanroom Conduit

28.65 Series Cleanroom Conduit

The 28.65 series cleanroom conduit (Cleanroom conduit 28.65) is made of TPU and provides protected guidance for cables and pneumatic tubing in clean environments. The conduit has an internal volume of 1515mm³, and cable and tubing fill must not exceed 70%. The standard version accommodates up to 6 cables or tubes of Φ8~Φ10 + 6 of Φ6~Φ7; with an integrated divider, it accommodates up to 6 of Φ6~Φ8 + 6 of Φ4~Φ5. The recommended divider density is 12~18 per meter. The minimum bend radius is R60, with R70 recommended. Unsupported length is ≤850mm, suitable travel is ≤1700mm, mounting height is 150~180mm, interference height is 170~220mm, and the external height of the carrier connector is 45mm. Acceleration is ≤3g, operating temperature is 30±5℃, operating relative humidity is 45±15%, service life is ≥15 million cycles, and the warranty is 18 months. Custom options include antistatic and flame-retardant versions. Accessories include the SZB cable comb plate (secured at the fixed connectors at both ends to prevent cables from tangling and rubbing), the 28.65.FGP integrated divider, and the JH.02.R70 heavy-duty support spine (suitable for

40.85.FGP Integrated Cable Separator

40.85.FGP Integrated Cable Separator

The 40.85.FGP integrated cable separator is a cable separation and support accessory designed specifically for use inside the 40.85 cleanroom conduit (Cleanroom conduit 40.85). Compared with conventional separation using a combination of vertical and horizontal dividers, its integrated design can significantly reduce installation time. It can be used with medium-duty or heavy-duty support spines to divide and support the space inside the conduit. Its overall dimensions are 92mm wide and 49mm high, with 8 cable openings. The three routing cavities measure A 18×15, B 18×15, and C 22.7×18.5 (width × height, in mm). It is compatible with cable carrier model 40.85. With this separator installed, the conduit can accommodate up to 4 Φ10~Φ12, 6 Φ8~Φ9, and 6 Φ6~Φ7 cables or hoses. The recommended quantity is 12~18 per meter to keep cables separated and prevent tangling and friction. It is suitable for cleanrooms, light loads, short travel distances, and applications requiring precise cable routing.

45 Series Cable Carrier

45 Series Cable Carrier

The 45 Series cable carrier is made of engineering plastic and is designed to protect cables and air hoses in machine tools, automation equipment, and similar applications. It is available in a range of internal dimensions, with internal heights of 45–80 mm and internal widths of 50–350 mm. The corresponding external dimensions are 20–30 mm greater. Choose from bend radii of 100, 125, 150, 200, or 250 mm; the pitch is fixed at 76 mm. Made from high-strength nylon, the carrier is wear- and corrosion-resistant and accommodates a variety of travel lengths and space requirements. Refer to the specification table for mounting dimensions A, B, C, D, and E, as well as hole diameters, to help with selection and installation.

5 Series Cable Carrier

5 Series Cable Carrier

The 5 Series cable carrier is available in non-opening and opening designs for guiding and protecting cables and pneumatic hoses in machine tools and automation equipment. It operates smoothly and quietly, with a tested service life of up to 10 million cycles. Cables can be installed or removed without opening the carrier, simplifying maintenance. Key specifications include inner height B, inner width F, outer height C, outer width E, bend radius R, weight (kg/m), number of links N, pitch P, hole diameter, connector hole spacing, and compatible connector models. The series offers three bend radii, R18, R28, and R38, with corresponding H values of 50/70/90, D values of 40/50/60, and K values of 90/120/150. Calculate chain length as chain length=S/2+K (S is the travel distance, and K=π·R+safety allowance). The actual installation height is H_F=H+14mm (load 0.2kg/m). The 7 Series and 10 Series are also available for selection based on load capacity and installation space.

7 Series Cable Carrier

7 Series Cable Carrier

The 7 Series is an engineering plastic cable carrier designed to support, guide and protect cables, pneumatic lines and hydraulic hoses during reciprocating motion in machine tools, automation equipment and robots. It helps prevent cables from wearing, tangling or breaking. The series operates smoothly and quietly, with a tested service life of up to 10 million cycles. Cables can be installed or removed without opening the carrier, simplifying maintenance and routing. Mounting bracket options are available to suit different equipment frame interfaces. Key dimensions include bend radius R, external height H, width D and chain length constant K. The 7 Series offers three bend radii, R18, R28 and R38, with corresponding H values of 50/70/90mm, D values of 40/50/60mm and K values of 90/120/150. Chain length is calculated using the formula: chain length = S/2 + K, where S is the travel distance and K = π·R + safety allowance. The actual installed height is H_F = H + 14mm (load 0.2kg/m).

BF15/QS15 Series Lightweight Cable Carriers

BF15/QS15 Series Lightweight Cable Carriers

The BF15/QS15 series consists of lightweight engineering plastic cable carriers designed to guide and protect cables under 12mm in diameter. They operate smoothly and quietly, with a tested service life of up to 10 million cycles. The outer crossbars can be opened for easy cable inspection or replacement. The series is available in three configurations: semi-enclosed, non-opening and openable. All have an inner height of 15mm, with inner widths of 15/20/30/40/50mm, outer widths of 24~59mm, an outer height of 20mm and bend radii of R28/R38/R48. The pitch is 22mm, with 45 links per meter. Chain length is calculated as S/2+K (S is the travel distance, K=π·R+safety allowance). For R28/38/48, the respective K values are 140/160/200, H values are 76/96/116 and D values are 58/68/78. The actual installation height is HF=H+20mm (load 0.3kg/m). Connector options include BF15X15, BF15X20, BF15X30, BF15X40, BF15X50, QS15X15, QS15X20 and QS15X30, and

JX28 Series Silent Cable Carrier

Smooth, highly stable, and silent operation.

HGA35 Series Sliding Cable Chain

HGA35 Series Sliding Cable Chain

The HGA35 series features an openable bridge design, smooth operation, high stability, and an attractive appearance.

HXSD-J/JM Series Hose Elbow Connectors

HXSD-J/JM Series Hose Elbow Connectors

Product Features: The special design of the internal locking clip and body allows installation and removal by simply pushing in or pulling out, without the need for tools.

TL155 Series Steel Drag Chain

TL155 Series Steel Drag Chain

Ordering example: TL155 drag chain, Type II support plate, bend radius R=250, support plate width Bi=300, drag chain length=8800. Type I has an integral support plate; Type II has separate upper and lower sections; Type III has aluminum plates on the top and bottom, with separators inside, and can be made to customer specifications.

HXSD-PP Series Flame-Retardant Polypropylene Conduit

HXSD-PP Series Flame-Retardant Polypropylene Conduit

Made of PP (polypropylene), with a corrugated structure inside and out. The operating temperature range is −30°C to +110°C, with short-term temperatures up to +110°C. Flame-retardant rating: FV-0. Available in black; other colors can be customized on request. Features include excellent flexibility, a glossy surface, and resistance to chemical corrosion. Applications include robotics, industrial automation, new-energy vehicle wiring harnesses, aerospace equipment, high-speed rail and subway systems, ships, power, and the chemical industry. Suitable for both dynamic and static environments. The page indicates RoHS certification.

40.85 Series 40.85 Cleanroom Cable Carrier

40.85 Series 40.85 Cleanroom Cable Carrier

The cable carrier has an internal cross-sectional area of 3056mm². Cable and hose fill must not exceed 70%. The standard version accommodates a maximum of 4 cables or hoses of Φ10~Φ12+10 of Φ8~Φ9+8 of Φ6~Φ7. The version with integrated separators accommodates a maximum of 4 cables or hoses of Φ10~Φ12+6 of Φ8~Φ9+6 of Φ6~Φ7. 12~18 separators per meter are recommended.

QZ80 Series Heavy-Duty Cable Chain

QZ80 Series Heavy-Duty Cable Chain

The QZ80 series is an open-frame cable chain with openable crossbars. It runs smoothly and offers high stability.

OM Series Open Cable Carrier

OM Series Open Cable Carrier

Optional one-piece mounting brackets can be installed in either orientation; crossbars can be opened along the outer or inner radius; smooth interior surfaces; small pitch for low vibration and noise; strain relief comb plates can be fitted to the brackets; internal dividers can be added.

HXSD-W/WM/WG Series Quick-Connect Hose Elbow Fittings

HXSD-W/WM/WG Series Quick-Connect Hose Elbow Fittings

Material: PA6 nylon (PA6/polyamide). Features an internal locking mechanism for tool-free installation and removal by inserting or pulling out the fitting. Colors: black and gray; other colors available on request.

HXSD-PE Series Polyethylene Flexible Conduit

HXSD-PE Series Polyethylene Flexible Conduit

Material: PE (polyethylene). Operating temperature: -30°C to +110°C, with short-term exposure up to +130°C. Certification: RoHS compliant. Structure: Corrugated inside and out. Color: Black; other colors available on request. Can be supplied with a slit as required. Features: Excellent flexibility, glossy surface, and chemical corrosion resistance. Applications: Robots, industrial automation equipment, aerospace equipment, high-speed rail and rail transit equipment, ships, the chemical industry, robotic arms, machine tools and machinery, lighting equipment, engineering installations, electrical insulation protection systems, and more. Commonly used in static environments.

DS25 Series Low-Noise Cable Carrier (Openable on Both Sides)

DS25 Series Low-Noise Cable Carrier (Openable on Both Sides)

The DS25 series low-noise cable carrier opens on both sides, allowing cables, pneumatic hoses and hydraulic hoses to be inserted or replaced directly from the side without stopping the machine. It is particularly suitable for protecting moving cables and hoses on machine tools, automated production lines, robots and CNC equipment. Optimized link contact surfaces and stops reduce operating noise, making it suitable for high-speed, long-travel reciprocating motion. The catalog specifies dimensions including inner height B, inner width F, outer height C, outer width E, bend radius R, weight Kg/m, number of links N and pitch P. The inner height is 45 mm, with inner widths from 50~200 mm; the outer width increases with the inner width. Bend radii include R75/R100/R125/R150, allowing selection based on available equipment space and the number of cables and hoses. Similar sizes such as DS35 and alternative models such as JY55 are also available.

DS35 Series Quiet Cable Carrier (Openable on Both Sides)

DS35 Series Quiet Cable Carrier (Openable on Both Sides)

The DS35 Series quiet cable carrier (openable on both sides) features engineering plastic links and is designed to support and protect cables, pneumatic lines, and hydraulic hoses in machine tools, automation equipment, robots, and new energy equipment. The catalog lists an inner height of 45 mm and inner widths of 50, 62, 70, 75, 80, 125, 150, 175, and 200 mm, with corresponding outer heights, outer widths, and weights (approximately 1.23~1.51 kg/m). The pitch is 65~115 mm. The quiet link design reduces impact noise during high-speed reciprocating motion. Links on both sides can be opened for easy cable installation, maintenance, and later additions without dismantling the entire carrier. Available bend radii are R75, R100, R125, and R150. JY-35 end connectors are provided; select connector hole spacing and mounting hole diameter from the catalog dimension table. Users can choose the carrier length according to travel distance, installation space, and cable outer diameter.

Miniature Series Plastic Cable Carrier

Miniature Series Plastic Cable Carrier

The miniature series plastic cable carrier is a flexible carrier that protects cables and tubing in compact spaces, such as those found in automation equipment and robots. It features a non-opening design and is available in internal heights of 7 mm, 10 mm, and 15 mm, with a range of internal widths from 6 mm to 50 mm. The external height and width vary according to the internal dimensions. Bend radii (R) of 18 mm, 28 mm, and 38 mm are available, and the mounting hole spacing is specified as value A or B depending on the model. Made from engineering plastic, it is lightweight and wear-resistant, making it suitable for high-speed applications.

Miniature Series 7 Plastic Cable Carrier

Miniature Series 7 Plastic Cable Carrier

The Miniature Series 7 plastic cable carrier has an internal height of 7 mm, an internal width of 7 mm, an external height of 10 mm, and an external width of 12.5 mm. Choose from bend radii of 18 mm, 28 mm, or 38 mm. Its non-openable design protects small-diameter cables in confined spaces. The connector hole spacing, A, is 8 mm. Compact, lightweight, and smooth-running, it is widely used in automation and electronic equipment.

Mini 10 Series Plastic Cable Carrier

Mini 10 Series Plastic Cable Carrier

The Mini 10 Series plastic cable carrier has an inner height of 10 mm and is available in inner widths of 6 mm, 10 mm, 15 mm, and 20 mm. The corresponding outer widths are 13.5 mm, 17.5 mm, 23 mm, and 28.5 mm, and the outer heights are 13.5 mm, 14 mm, 15.5 mm, and 15.5 mm, respectively. Three bend radii are available: 18 mm, 28 mm, and 38 mm. Its non-opening design is suitable for protecting cables in confined spaces. Connector hole spacing varies by inner width: A = 8 mm (inner widths 6 and 10 mm); A = 10 mm, B = 0 mm (inner width 15 mm); or A = 10 mm, B = 5 mm (inner width 20 mm).

Reinforced Nylon Cable Carrier

Reinforced Nylon Cable Carrier

This series of reinforced nylon cable carriers is designed to protect and guide cables, oil hoses, and other lines on machinery. Made from high-strength nylon, the carriers are wear-resistant, corrosion-resistant, and impact-resistant. Available in a range of configurations, including open, fully enclosed, double-row enclosed, double-row open, and S-shaped designs. Inner dimensions range from 20 × 38 mm to 45 × 125 mm, with corresponding variations in outer dimensions. Available bend radii are 55, 75, 100, 125, 150, and 200 mm. Pitch is fixed at 45.5 or 76 mm (76 mm for the 45 series). Specific values are provided for installation dimensions A, B, C, D, and E, as well as the hole diameter, to suit a variety of applications.

TL-Type Steel Cable Drag Chain

TL-Type Steel Cable Drag Chain

The TL-type steel cable drag chain is a machine tool accessory designed to protect cables and pipes. Made from high-strength steel plate, it is wear-resistant, corrosion-resistant, and has high tensile strength. The series includes seven models: TL45, TL65, TL95, TL125, TL180, TL225, and TL250. Pitch ranges from 45 mm to 250 mm; available bend radii vary by model from 50 mm to 750 mm; minimum widths range from 145 mm to 1,000 mm; and link lengths range from 35 mm to 190 mm. Custom bend radii are available on request. These chains are widely used in cable carrier systems for CNC machine tools, automation equipment, robots, and other applications.

Silver Star Cover Plate (GLE Type)

Silver Star Cover Plate (GLE Type)

The Silver Star Cover Plate (GLE Type) is a fully enclosed cover made of aluminum alloy, developed specifically for TCL drag chain links to protect cables and piping. Its attractive appearance is matched by a stable, robust construction. It can be up to 1,000 mm wide, and the drag chain can be opened at any point for easy maintenance. Cover plates can be added at any time as needed. Available order numbers are 10B, 20B, and 30B (10B is the most commonly used size). Example order: GLE100 fully enclosed – R300×350×6800. When the drag chain exceeds the permitted length, support rollers must also be installed underneath it to prevent sagging.

GLE Cable Carrier

GLE Cable Carrier

The GLE cable carrier is a fully enclosed aluminum-alloy carrier that effectively protects cables and hoses. Its cover panels feature a “Silver Star” design, combining an attractive appearance with a sturdy construction proven in over 15 years of practical use. It is available in widths of up to 1,000 mm, and can be opened at any point for easy maintenance. Additional cover panels can be fitted at any time to meet user requirements. If the carrier exceeds the permitted length, support wheels must be installed to prevent sagging. Example order specification: GLE100 fully enclosed, R300 × 350 × 6800.

TCL-Type Cable Carrier

TCL-Type Cable Carrier

The TCL-type cable carrier is an aluminum-alloy, fully enclosed cable carrier designed for use with Silver Star protective panels. The panel design has been proven over more than 15 years. It is attractive, stable, and robust, with a maximum width of 1,000 mm. The carrier can be opened at any point, and additional sections can be added at any time as needed. If the carrier exceeds its allowable length, support rollers must be added to prevent sagging. Example order specification: GLE100 fully enclosed-R300×350×6800.

Cleanroom Cable Carrier

Cleanroom Cable Carrier

The cleanroom cable carrier features a flat design that reduces installation height while protecting the cables and air tubes inside. Its sheath is made from a polymer PU and e-PTFE composite, offering high cleanliness, self-cleaning properties, flex and fatigue resistance, antistatic performance, low noise, and a long service life of tens of millions of cycles. The support chain is made from modified PA for precise angles and a robust structure. It houses highly flexible cables and air tubes, with the cables wrapped using e-PTFE and shielding to improve signal transmission stability. It is suitable for high-cleanliness applications in semiconductors, 3C microelectronics, display panels, mobile electronics, photovoltaics and new energy, medical devices, and pharmaceuticals. Sheath configurations include 1P, 2P, 3P, 4P, and special three-hole/five-hole versions. The sheath is 1.4mm thick, with an internal opening width of 20.5/29mm and an overall width of 39~138mm.

Cleanroom Cable Carrier

Cleanroom Cable Carrier

A cleanroom cable carrier is a flat cable carrier designed for highly controlled environments. It reduces installation height and extends the service life of internal cables and components. Made from a polymer PU and e-PTFE composite, it offers self-cleaning, flex and fatigue resistance, resistance to acids, alkalis and aging, low noise, and antistatic properties. The support chain is made from modified PA for precise angles and a robust structure. It houses highly flexible cables and pneumatic tubing, with cables wrapped using a combination of e-PTFE and shielding wire to improve signal transmission stability. It is suitable for industries with stringent cleanliness requirements, including semiconductors, 3C microelectronics, display panels, mobile electronics, photovoltaic energy, medical devices, and pharmaceuticals.

TMY Cleanroom High-Flex Flat Cable Carrier

TMY Cleanroom High-Flex Flat Cable Carrier

The TMY cleanroom high-flex flat cable carrier is made from polymer silicone and consists of flexible cables, network cables, signal cables, pneumatic tubing, and push-in connectors. Its modular design allows flexible assembly. Cleanroom-compatible and resistant to repeated bending and fatigue, it provides a connection solution for motion-control cable assemblies. The product is widely used in clean environments with stringent cleanliness requirements, including semiconductor and 3C microelectronics, display panels and mobile electronics, photovoltaics and new energy, and medical and pharmaceutical applications. Custom configurations are available using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing, and other components. Accessories are also available for installation and fastening, including clamp plates (2HL~6HL), support spines (R40/R70), spacers, filling adhesive, internally threaded screws, hex standoffs, and flat-head screws.

HL Series Clamp Plates

HL Series Clamp Plates

HL series clamp plates are accessories for cleanroom cable carriers with highly flexible flat cables and their support frame systems. They secure the support frame and cable routing assembly, ensuring stable positioning of the cable carrier during high-speed reciprocating motion. The series comes in five sizes: 2HL, 3HL, 4HL, 5HL and 6HL. The three key dimensions are A (overall length), R (arc radius) and C (height). C is 46mm for all models, while A ranges from 56.5~134.1mm and R from 47~124.1mm, increasing with each model size. Users can select a model based on the support frame radius (R40, R70) and available installation space. Each size has a unique material code (JH.06.2HL ~ JH.06.6HL) for convenient purchasing and inventory management. These plates are commonly used with support frames, spacer blocks, filling compound, internally threaded screws, hex studs, flat-head screws and other accessories. They are widely used on automated production lines with stringent cleanroom requirements, including semiconductor and 3C microelectronics, display panels, photovoltaics and new energy, medical devices and pharmaceuticals.

Support spine

Support spine

The support spine is a curved support and guide accessory for cleanroom-compatible, highly flexible flat cable carrier and moving cable harness systems. It works with clamping plates, spacers, filler adhesive and fasteners to define the cable harness path. The catalog lists two standard radius options: R40mm and R70mm, with corresponding material codes JH.07.R40 and JH.07.R70. Selected by radius, this series is suitable for applications with stringent cleanliness requirements, including semiconductors and 3C microelectronics, display panels, photovoltaic and new energy, medical devices and pharmaceuticals. Custom assemblies can also be made using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing and other components.

Clamp Plates / Guide Ribs / Accessories

Clamp Plates / Guide Ribs / Accessories

Clamp plates, guide ribs, and accessories are installation components for cleanroom-compatible, highly flexible flat cable carriers and cable management systems used in semiconductor, 3C microelectronics, display panel, photovoltaic and renewable energy, medical, and pharmaceutical applications. Clamp plates secure the cable carrier or cable bundle and are available in five sizes based on curved surface dimensions: 2HL, 3HL, 4HL, 5HL, and 6HL. A increases from 56.5mm to 134.1mm, R increases from 47mm to 124.1mm, and C is 46mm throughout, accommodating different bend radii and installation heights. Guide ribs provide curved guidance for the cable carrier and are available in R40mm and R70mm radii. Accessories include fasteners and fillers such as 4mm spacers, filling compound, 10-M4 internally threaded screws, 8-10-M4 hex studs, and M4-8 flat-head screws. The materials are suited to cleanroom requirements and resist bending and fatigue. Modular assemblies can be customized using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing, and other components.

22.40 Cleanroom Conduit

22.40 Cleanroom Conduit

The 22.40 cleanroom conduit is a cable conduit designed for clean environments. It is made of TPU and comes in standard white or black, with custom colors available. It is intended for use at 30±5℃ and a relative humidity of 45±15, with operating acceleration not exceeding 3g. It has a service life of at least 15 million cycles and an 18-month warranty. Antistatic and flame-retardant versions are also available on request. Cable and hose fill must not exceed 70% of the conduit interior: the standard version holds up to 6 cables of Φ7~Φ8 plus 4 of Φ4~Φ6; the version with horizontal and vertical dividers holds up to 4 of Φ6~Φ7 plus 4 of Φ4~Φ5; and the version with a lightweight support frame holds up to 2 of Φ6~Φ7 plus 2 of Φ4~Φ5. For horizontal and vertical dividers, 12 sets per meter are recommended. The available bend radii are 60 (minimum) and 70 (recommended). The connector's external height is 38mm, the unsupported length is no more than 800, the applicable travel is no more than 1600, the installation height is 140~170, and the clearance height is 160~210. The product features a new patented design that resists tensile forces without coming apart. It locks at the fixed connectors on both ends and includes a cable comb to prevent cables

35.65 Cleanroom Cable Carrier

35.65 Cleanroom Cable Carrier

The 35.65 cleanroom cable carrier is made of TPU and designed to guide cables and pneumatic tubing in cleanrooms. Its internal volume is 2025 mm³, and a maximum fill of 70% is recommended. The standard version holds up to 8 cables of Φ8~Φ10 plus 6 of Φ6~Φ7. With integrated dividers, it holds up to 6 cables of Φ8~Φ8 plus 10 of Φ4~Φ6; 12~18 dividers per meter are recommended. The minimum bend radius is 70 mm, with 90 mm recommended. It supports travel lengths ≤1700 mm and unsupported lengths ≤850 mm, with an installation height of 155~190 mm and an interference height of 200~250 mm. The product is available in white, black, or custom colors, with options such as antistatic and flame-retardant customization. Service life is ≥20 million cycles, and the warranty is 18 months.

40.85 Cleanroom Cable Carrier

40.85 Cleanroom Cable Carrier

The 40.85/40.110 series cleanroom cable carriers are made of TPU and guide, separate, and protect cables and pneumatic hoses in cleanrooms. The 40.85 carrier has an internal volume of 3056mm³, and the 40.110 has 4000mm³; cable and hose fill must not exceed 70%. The standard 40.85 model can accommodate up to 4 cables or hoses of Φ10~Φ12 + 10 of Φ8~Φ9 + 8 of Φ6~Φ7. With an integrated divider, it can accommodate 4 of Φ10~Φ12 + 6 of Φ8~Φ9 + 6 of Φ6~Φ7; 12~18 dividers per meter are recommended. The minimum bend radius is 100mm, with 130mm recommended. Unsupported length is ≤900mm, and travel is ≤1800mm. Operating acceleration is ≤3g, operating temperature is 30±5℃, and operating relative humidity is 45±15%. Service life is ≥20 million cycles, with an 18-month warranty. Optional accessories include a cable comb (SZB), an integrated divider (FGP), horizontal and vertical separators, and a heavy-duty support spine JH.03.R70 (for unsupported lengths of 1000~1800mm) for extra-long

40.110 Cleanroom Cable Carrier

40.110 Cleanroom Cable Carrier

The 40.110 cleanroom cable carrier guides and protects cables and pneumatic tubing in cleanrooms and factory automation equipment. Its body is made of TPU and is available in white, black, and custom colors. The carrier has an internal volume of approximately 4000 mm³, with cable and tubing fill limited to 70%. It accommodates multiple Φ6~Φ12 cables or tubes, and 12~18 separators per meter are recommended to divide the internal space. The product supports acceleration of ≤3g, operates at 30±5℃ and 45±15% relative humidity, has a service life of ≥20 million cycles, and carries an 18-month warranty. Special versions, including antistatic and flame-retardant products, are available on request. The series includes 40.110C mounting brackets, 40.110.SZB comb plates, 40.110.FGP integrated separators, and the JH.03.R70 heavy-duty support frame system for long-travel or long unsupported applications. Example configuration: 40.110 R60 L1000 + 40.110C + (SZB) + (FGP).

CFX Series Cable Carriers

CFX Series Cable Carriers

The CFX series strain-relief components include cable clamps, comb plates, mounting brackets and C-channels, providing secure cable retention and strain relief in cable carrier systems. Cable clamps are available in single-, double- and triple-layer versions, securing one to three cables at a time and accommodating cable diameters from 6 to 42 mm. C-channels serve as mounting bases and can be integrated inside engineering-plastic connectors or used independently. They are available in galvanized or stainless steel, with custom lengths available on request. The tie plates offer single- or double-row cable tying, using cable ties to secure the cables. All components are designed for compatibility with cable carrier systems, and their installation height must be less than the carrier’s external height. Operating temperature: −40°C to +80°C. Suitable for indoor and outdoor environments, including dusty and chemically exposed areas.

CR Series

CR Series

This series includes strain-relief components such as C-channels, cable clamps and cable tie plates, which secure and protect cables in cable carriers. The C-channel serves as a mounting channel for cable clamps or cable tie plates. It can be integrated into an MFB connector or used separately, and is available in galvanized steel or stainless steel. Custom lengths are available with a tolerance of ±1 mm. Cable clamps are available in single-, double- and triple-layer versions for different cable diameters (6–42 mm), and can secure one to three cables at a time. Cable tie plates accommodate single- or double-row cable ties and can be mounted independently or attached to a C-channel. All components are suitable for indoor and outdoor use and are dustproof, dirt-resistant and resistant to chemicals.

HXSD-MINI Small Cable Carrier Series

HXSD-MINI Small Cable Carrier Series

The HXSD-MINI series of small plastic cable carriers comes in a wide range of styles and sizes, with ample stock on hand to ensure short lead times. The extensive selection includes multiple opening styles—non-opening, inner-opening, semi-enclosed, and bridge-type—to suit different solutions and applications. Testing has confirmed a service life of over 15 million cycles. The connectors support four mounting options: T1, T2, T3, and T4. T1 is the default.

Miniature Bridge-Type Cable Drag Chain, Non-Opening, Series 5

Miniature Bridge-Type Cable Drag Chain, Non-Opening, Series 5

This is a miniature, non-opening bridge-type cable drag chain with a 5 mm inner width, R10 bend radius, B (non-opening) style, 8 mm outer height, 8.6 mm outer width, 2.4 mm hole diameter, A hole spacing, and C color. The allowable temperature is 8.5°C (to be confirmed). Included accessory: model HXSD01-5-5C. Suitable for cables under 5 mm in diameter. The material is not specified, and the operating temperature range has not been confirmed.

Miniature bridge-type cable carrier, non-openable, Series 7

Miniature bridge-type cable carrier, non-openable, Series 7

This series of miniature bridge-type cable carriers features a non-openable design and is suitable for guiding and protecting cables with a diameter of less than 5 mm. It is made of PA6+G30 (nylon 6 with 30% glass fiber), is black, and has an allowable operating temperature range of -20°C to 120°C. The number of carrier links per meter = 1000 + pitch. Cable carrier connectors are sold as a complete set (including moving-end and fixed-end connectors). Model HXSD02 is the base model, with an internal height of 7 mm and options including a bend radius of R15. It can be paired with fixed-end connectors such as HXSD02-7-C. Ordering example: HXSD02-7-7-R15B + length + connector model. Some models are currently in mold development.