Cable Carrier Accessories

28.65.FGP One-Piece Cable Separator

28.65.FGP One-Piece Cable Separator

The 28.65.FGP one-piece cable separator is an accessory for separating cables inside the 28.65 cleanroom cable chain. It significantly reduces installation time compared with conventional horizontal and vertical dividers. It measures 69 mm wide and 38.5 mm high and has 8 cable openings, with opening sizes A(5×14 mm), B(14×14.5 mm), and C(14×14.5 mm). The separator can be used on its own to divide the internal space in light-load, short-travel applications, or combined with medium-duty/heavy-duty support rails to separate and support cables and pneumatic hoses inside the chain. The catalog recommends 12~18 separators per meter. It is compatible with the 28.65 cable chain.

40.85.FGP Integrated Cable Separator

40.85.FGP Integrated Cable Separator

The 40.85.FGP integrated cable separator is a cable separation and support accessory designed specifically for use inside the 40.85 cleanroom conduit (Cleanroom conduit 40.85). Compared with conventional separation using a combination of vertical and horizontal dividers, its integrated design can significantly reduce installation time. It can be used with medium-duty or heavy-duty support spines to divide and support the space inside the conduit. Its overall dimensions are 92mm wide and 49mm high, with 8 cable openings. The three routing cavities measure A 18×15, B 18×15, and C 22.7×18.5 (width × height, in mm). It is compatible with cable carrier model 40.85. With this separator installed, the conduit can accommodate up to 4 Φ10~Φ12, 6 Φ8~Φ9, and 6 Φ6~Φ7 cables or hoses. The recommended quantity is 12~18 per meter to keep cables separated and prevent tangling and friction. It is suitable for cleanrooms, light loads, short travel distances, and applications requiring precise cable routing.

40.85 Series 40.85 Cleanroom Cable Carrier

40.85 Series 40.85 Cleanroom Cable Carrier

The cable carrier has an internal cross-sectional area of 3056mm². Cable and hose fill must not exceed 70%. The standard version accommodates a maximum of 4 cables or hoses of Φ10~Φ12+10 of Φ8~Φ9+8 of Φ6~Φ7. The version with integrated separators accommodates a maximum of 4 cables or hoses of Φ10~Φ12+6 of Φ8~Φ9+6 of Φ6~Φ7. 12~18 separators per meter are recommended.

HL Series Clamp Plates

HL Series Clamp Plates

HL series clamp plates are accessories for cleanroom cable carriers with highly flexible flat cables and their support frame systems. They secure the support frame and cable routing assembly, ensuring stable positioning of the cable carrier during high-speed reciprocating motion. The series comes in five sizes: 2HL, 3HL, 4HL, 5HL and 6HL. The three key dimensions are A (overall length), R (arc radius) and C (height). C is 46mm for all models, while A ranges from 56.5~134.1mm and R from 47~124.1mm, increasing with each model size. Users can select a model based on the support frame radius (R40, R70) and available installation space. Each size has a unique material code (JH.06.2HL ~ JH.06.6HL) for convenient purchasing and inventory management. These plates are commonly used with support frames, spacer blocks, filling compound, internally threaded screws, hex studs, flat-head screws and other accessories. They are widely used on automated production lines with stringent cleanroom requirements, including semiconductor and 3C microelectronics, display panels, photovoltaics and new energy, medical devices and pharmaceuticals.

Support spine

Support spine

The support spine is a curved support and guide accessory for cleanroom-compatible, highly flexible flat cable carrier and moving cable harness systems. It works with clamping plates, spacers, filler adhesive and fasteners to define the cable harness path. The catalog lists two standard radius options: R40mm and R70mm, with corresponding material codes JH.07.R40 and JH.07.R70. Selected by radius, this series is suitable for applications with stringent cleanliness requirements, including semiconductors and 3C microelectronics, display panels, photovoltaic and new energy, medical devices and pharmaceuticals. Custom assemblies can also be made using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing and other components.

Clamp Plates / Guide Ribs / Accessories

Clamp Plates / Guide Ribs / Accessories

Clamp plates, guide ribs, and accessories are installation components for cleanroom-compatible, highly flexible flat cable carriers and cable management systems used in semiconductor, 3C microelectronics, display panel, photovoltaic and renewable energy, medical, and pharmaceutical applications. Clamp plates secure the cable carrier or cable bundle and are available in five sizes based on curved surface dimensions: 2HL, 3HL, 4HL, 5HL, and 6HL. A increases from 56.5mm to 134.1mm, R increases from 47mm to 124.1mm, and C is 46mm throughout, accommodating different bend radii and installation heights. Guide ribs provide curved guidance for the cable carrier and are available in R40mm and R70mm radii. Accessories include fasteners and fillers such as 4mm spacers, filling compound, 10-M4 internally threaded screws, 8-10-M4 hex studs, and M4-8 flat-head screws. The materials are suited to cleanroom requirements and resist bending and fatigue. Modular assemblies can be customized using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing, and other components.

Silent Series Separators

Silent Series Separators

Silent series separators (internal separators) are components installed inside silent engineering plastic cable carriers to separate power cables, signal cables, pneumatic tubes, hydraulic hoses and other lines within the same cavity. They prevent friction, tangling and wear during operation while complementing the low-noise design to reduce noise during high-speed reciprocating motion. Separators can be inserted at any pitch position as needed, allowing the inner width F to be divided into multiple compartments. When selecting separators, ensure compatibility with the cable carrier's inner height B, inner width F, outer height C, outer width E, bend radius R, pitch P, number of links N and JY-28 mounting bracket hole spacing. They are generally made of wear-resistant engineering plastics such as PA66 and offer self-lubricating, wear-resistant and impact-resistant properties. They are suitable for high-speed, low-noise applications involving machine tools, robots, automated production lines and material handling systems.

JH.02.R70 Heavy-Duty Support Frame

JH.02.R70 Heavy-Duty Support Frame

The JH.02.R70 heavy-duty support frame is designed for use with 28.65 series cleanroom cable carriers (cleanroom cable conduits). The carrier itself is flexible, and its bend height varies with the diameter and number of cables and pneumatic tubes inside it. Its unsupported length is also limited. For extra-long travel or applications requiring a longer unsupported span, a support frame must be installed to provide rigid support and control the bend radius. The heavy-duty frame is suitable for unsupported lengths of 900~1500mm and uses LG.28.02M/F frame connectors at both ends to connect to the carrier's fixed and moving ends. The 28.65.FGP integrated divider can be used inside the carrier to separate and support cables. The product is supplied fully assembled. It is widely used for long-travel linear motion with long unsupported spans in cleanroom environments, including semiconductor, display panel and pharmaceutical applications.

JH.03 Heavy-Duty Backbone System

JH.03 Heavy-Duty Backbone System

The JH.03 heavy-duty backbone system is a flexible support assembly designed for use with cleanroom cable carriers (40.85 series). The cleanroom cable carrier itself has a flexible structure, so its bend height varies with the diameter and number of cables and pneumatic hoses inside it, and its unsupported length is limited. When a longer unsupported span or an extra-long travel distance is required, a backbone system must be added to provide robust support and maintain the carrier's bend radius. The JH.03.R70 heavy-duty backbone is suitable for 40.85 conduits and unsupported lengths of 1000~1800mm. It is assembled with LG.40.M/F backbone connectors and a 40.85.FGP integrated divider to keep the cable carrier running smoothly over medium to long unsupported spans, preventing collapse and tangling. It is suitable for guiding cables and pneumatic hoses over long travel distances in automated cleanroom equipment.