Splitters

28.65.FGP One-Piece Cable Separator
The 28.65.FGP one-piece cable separator is an accessory for separating cables inside the 28.65 cleanroom cable chain. It significantly reduces installation time compared with conventional horizontal and vertical dividers. It measures 69 mm wide and 38.5 mm high and has 8 cable openings, with opening sizes A(5×14 mm), B(14×14.5 mm), and C(14×14.5 mm). The separator can be used on its own to divide the internal space in light-load, short-travel applications, or combined with medium-duty/heavy-duty support rails to separate and support cables and pneumatic hoses inside the chain. The catalog recommends 12~18 separators per meter. It is compatible with the 28.65 cable chain.

40.85.FGP Integrated Cable Separator
The 40.85.FGP integrated cable separator is a cable separation and support accessory designed specifically for use inside the 40.85 cleanroom conduit (Cleanroom conduit 40.85). Compared with conventional separation using a combination of vertical and horizontal dividers, its integrated design can significantly reduce installation time. It can be used with medium-duty or heavy-duty support spines to divide and support the space inside the conduit. Its overall dimensions are 92mm wide and 49mm high, with 8 cable openings. The three routing cavities measure A 18×15, B 18×15, and C 22.7×18.5 (width × height, in mm). It is compatible with cable carrier model 40.85. With this separator installed, the conduit can accommodate up to 4 Φ10~Φ12, 6 Φ8~Φ9, and 6 Φ6~Φ7 cables or hoses. The recommended quantity is 12~18 per meter to keep cables separated and prevent tangling and friction. It is suitable for cleanrooms, light loads, short travel distances, and applications requiring precise cable routing.

40.85 Series 40.85 Cleanroom Cable Carrier
The cable carrier has an internal cross-sectional area of 3056mm². Cable and hose fill must not exceed 70%. The standard version accommodates a maximum of 4 cables or hoses of Φ10~Φ12+10 of Φ8~Φ9+8 of Φ6~Φ7. The version with integrated separators accommodates a maximum of 4 cables or hoses of Φ10~Φ12+6 of Φ8~Φ9+6 of Φ6~Φ7. 12~18 separators per meter are recommended.

Silent Series Separators
Silent series separators (internal separators) are components installed inside silent engineering plastic cable carriers to separate power cables, signal cables, pneumatic tubes, hydraulic hoses and other lines within the same cavity. They prevent friction, tangling and wear during operation while complementing the low-noise design to reduce noise during high-speed reciprocating motion. Separators can be inserted at any pitch position as needed, allowing the inner width F to be divided into multiple compartments. When selecting separators, ensure compatibility with the cable carrier's inner height B, inner width F, outer height C, outer width E, bend radius R, pitch P, number of links N and JY-28 mounting bracket hole spacing. They are generally made of wear-resistant engineering plastics such as PA66 and offer self-lubricating, wear-resistant and impact-resistant properties. They are suitable for high-speed, low-noise applications involving machine tools, robots, automated production lines and material handling systems.