Support Frames

Support spine
The support spine is a curved support and guide accessory for cleanroom-compatible, highly flexible flat cable carrier and moving cable harness systems. It works with clamping plates, spacers, filler adhesive and fasteners to define the cable harness path. The catalog lists two standard radius options: R40mm and R70mm, with corresponding material codes JH.07.R40 and JH.07.R70. Selected by radius, this series is suitable for applications with stringent cleanliness requirements, including semiconductors and 3C microelectronics, display panels, photovoltaic and new energy, medical devices and pharmaceuticals. Custom assemblies can also be made using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing and other components.

JH.02.R70 Heavy-Duty Support Frame
The JH.02.R70 heavy-duty support frame is designed for use with 28.65 series cleanroom cable carriers (cleanroom cable conduits). The carrier itself is flexible, and its bend height varies with the diameter and number of cables and pneumatic tubes inside it. Its unsupported length is also limited. For extra-long travel or applications requiring a longer unsupported span, a support frame must be installed to provide rigid support and control the bend radius. The heavy-duty frame is suitable for unsupported lengths of 900~1500mm and uses LG.28.02M/F frame connectors at both ends to connect to the carrier's fixed and moving ends. The 28.65.FGP integrated divider can be used inside the carrier to separate and support cables. The product is supplied fully assembled. It is widely used for long-travel linear motion with long unsupported spans in cleanroom environments, including semiconductor, display panel and pharmaceutical applications.

JH.03 Heavy-Duty Backbone System
The JH.03 heavy-duty backbone system is a flexible support assembly designed for use with cleanroom cable carriers (40.85 series). The cleanroom cable carrier itself has a flexible structure, so its bend height varies with the diameter and number of cables and pneumatic hoses inside it, and its unsupported length is limited. When a longer unsupported span or an extra-long travel distance is required, a backbone system must be added to provide robust support and maintain the carrier's bend radius. The JH.03.R70 heavy-duty backbone is suitable for 40.85 conduits and unsupported lengths of 1000~1800mm. It is assembled with LG.40.M/F backbone connectors and a 40.85.FGP integrated divider to keep the cable carrier running smoothly over medium to long unsupported spans, preventing collapse and tangling. It is suitable for guiding cables and pneumatic hoses over long travel distances in automated cleanroom equipment.