Drag Chain — Page 2

Z Series Miniature One-Piece Cable Carrier
The Z Series miniature cable carrier features a one-piece design and a small pitch for smooth operation with low vibration and noise. It protects cables and pneumatic hoses in space-constrained applications such as electronic equipment, precision machinery, semiconductor equipment, and medical instruments. Its smooth interior is gentle on cables and hoses, helping reduce cable wear, while a multi-point stop design ensures high stability during operation. Optional one-piece connectors support both forward and reverse mounting. Common specifications include an inner width (F) of 10~20 mm and an inner height (B) of 10~15 mm, with corresponding outer widths of 18~28.4 mm, outer heights of 13.2~19.3 mm, bend radii of 18~28 mm, and pitches of 13.6~28 mm. Materials, colors, and connector configurations can be selected as needed.

M Series Open-Frame Cable Carriers
M Series open-frame cable carriers support and protect cables, oil hoses, pneumatic hoses and other lines in machine tools and automated equipment, moving back and forth with moving components. Their open-frame design features crossbars that open on either the outer or inner radius for easy cable installation and maintenance. Optional one-piece mounting brackets can be installed in either orientation, and strain-relief comb plates are available. Internal separators can be added to keep multiple lines apart. The short-pitch design ensures smooth operation with low vibration and noise, while the smooth inner surfaces protect the lines. QN18/QN20 semi-enclosed cable carriers with opening crossbars have an inner width of 18~50mm, an inner height of 18/20mm, a bend radius of 28~70mm and a pitch of approximately 30~55mm. Select the model based on inner width, bend radius and number of links.

HXSD Lightweight Cable Carrier Series
The HXSD Lightweight Cable Carrier Series is ShengdA’s complete cable protection system, comprising bridge-type cable carriers, corrugated tubing, and fittings. The carrier body is made of PA6+GF30. Its crossbars can be opened from either the inner or outer bend radius, and the design supports S-shaped routing. Testing has demonstrated a service life of over 15 million cycles. The system comes with PP/PE corrugated tubing (operating temperature: -30 to 110°C; flame-retardant rating: FV-0 or V-2) and quick-connect fittings with German, metric, and imperial thread types (PG/M/G; IP68 protection rating). These products are widely used in robotics, industrial automation, new energy vehicles, aerospace equipment, and other fields, providing reliable cable protection and convenient plug-in installation.

Q(F)Z45 Heavy-Duty Cable Carrier
The Q(F)Z45 heavy-duty cable carrier is available in two designs: the Q series with an openable bridge-style structure and the F series with an openable enclosed structure. It runs smoothly and provides high stability, making it suitable for guiding and protecting cables, oil hoses and other lines in machine tools and automated equipment. The series has an inner height of 45 mm and inner widths of 50, 60, 75, 100, 125 and 150 mm, with corresponding outer widths of 82~182 mm, an outer height of 66 mm and a pitch of 68 mm. Bend radius options are 75, 100, 125, 150, 175, 200, 250 and 300 mm. Select the bend radius and number of links according to the available installation space and travel length. When ordering, use the format “carrier code-inner width-bend radius-number of links”; Q denotes the openable bridge-style design, and F denotes the openable enclosed design.

Q(F)Z Series Engineering Plastic Cable Chains
The Q(F)Z series consists of domestically manufactured engineering plastic cable chains that guide and protect cables and oil hoses in machine tools and automated equipment. They offer smooth, stable operation, wear resistance, and low noise. By construction, they are available in two types: the Q series (QZ, openable bridge type) and the F series (FZ, openable enclosed type). By load capacity, they are available as the Q(F)Z35 standard type and Q(F)Z45 reinforced type. Models use a four-part code: “cable chain code-inner width-bend radius-number of links.” The inner width is the internal cavity width F, the number of links is the chain link count, and the bend radius determines the minimum turning size. For example, the Q(F)Z45 reinforced type has an inner height of 45 mm and inner widths of 50/60/75/100/125/150 mm, corresponding to outer widths of 82/92/107/132/157/182 mm. Its outer height is 66 mm, available bend radii are 75/100/125/150/175/200/250/300 mm, and its pitch is 68 mm. To select a model, first determine the inner width and height based on the outside diameter of the cable bundle, then select the bend radius according to the available installation space and travel distance, and finally calculate the number of links from the required length.

Q(F)Z55 Heavy-Duty Cable Carrier
The Q(F)Z55 heavy-duty cable carrier is made of engineering plastic and protects cables and oil hoses as it travels back and forth with moving components in machine tools and automated equipment. The series is available in two designs: QZ55 is an openable bridge type, while FZ55 is an openable enclosed type. Both offer smooth operation and high stability. All sizes have an inner height (B) of 55 mm, an outer height (C) of 82 mm, a pitch (P) of 78 mm, and a standard bend radius (R) of 100 mm. Nine inner widths (F) are available: 75, 100, 125, 150, 175, 200, 225, 250, and 300 mm, with corresponding outer widths (E) ranging from 110 mm to 335 mm. For every 25 mm increase in inner width, the outer width increases by 25 mm. The 75 mm inner width is available only in the QZ55 bridge design; all other widths are available in both QZ55 and FZ55 designs. When ordering, complete the model designation with the required bend radius (R) and number of links (N), based on the travel distance and available installation space.

Q(F)Z65 Heavy-Duty Cable Carrier
The Q(F)Z65 heavy-duty cable carrier is available in two designs: the QZ65 openable bridge type and the FZ65 openable enclosed type. Both provide smooth operation and high stability. The inner height is 65 mm, and inner widths start at 75 mm, with common sizes including 75, 100, 125, 150, 175, 200, 225, 250, and 300 mm. The outer width increases with the inner width; the 75 mm inner width corresponds to an outer width of 114 mm and an outer height of 95 mm. The bend radius R and number of links N can be selected according to equipment travel and installation space. Complete the model designation as Q(F)Z65.[inner width].[bend radius].[number of links]. Suitable for guiding and protecting cables, oil hoses, and pneumatic hoses in machine tools and automated equipment, the heavy-duty design improves load capacity and wear resistance.

Lightweight Economy Cable Carrier
The lightweight economy cable carrier is a flexible protective chain that guides and protects moving cables, pneumatic lines, and hydraulic hoses in machine tools, automation equipment, and robotics. Designed for low weight and cost, the series offers six structural features: mounting brackets that can be attached in any direction on any surface for flexible installation; smooth interior surfaces that minimize wear on cables and hoses; crossbars and side plates with a double-locking connection for strong pull-out resistance and stable operation; interlocking side plates that provide high overall rigidity and stability when assembled; noise-reducing brakes for quiet operation; and a range of optional strain-relief accessories, such as clamps, separators, and comb plates, that can be configured to suit the cable and hose layout. It is suitable for reciprocating applications with short to medium travel and moderate loads. Users can select a model based on inner width, inner height, bend radius, travel length, and mounting method.

JGA(B)45 Series Lightweight, Economy Cable Chains
JGA(B)45 series lightweight, economy cable chains are injection-molded from engineering plastic. They have an inner height of 45mm, an outer height of 66mm, and a pitch of 68mm. Inner widths range from 50~300mm, with corresponding outer widths of 82~332mm, across 15 inner width options. Bend radii of 100, 125, 150, 175, 200, 250, and 300mm are available. Select the R value according to travel distance and installation space, along with the appropriate number of links N. Two designs are available: the JGA45 series is an open-style chain that can be opened, while the JGB45 series is an enclosed chain that can be opened. Both make it easy to install and maintain cables, hydraulic hoses, and pneumatic hoses. The chains run smoothly, offer high stability, and have an attractive appearance. They are suitable for guiding and protecting moving cables on machine tools, automated equipment, robots, and more. When ordering, use the JGA(B)45-F-R-N code, specifying the chain code, inner width F, bend radius R, and number of links N in sequence.

JGA(B)45 Series Lightweight, Economical Cable Carriers
The JGA(B)45 series consists of lightweight, economical engineering-plastic cable carriers available in two designs with the same 45 link height: the JGA45 openable type has links that flip open for easy cable installation and maintenance, while the JGB45 enclosed openable type has an enclosed exterior that can be opened. Both have identical overall dimensions and pitch. All models have an inner height B of 45 mm, an outer height C of 66 mm, and a pitch P of 68 mm. Inner width F ranges from 50~300 mm in 15 options, with corresponding outer width E from 82 mm to 332 mm, increasing by approximately 25.5 mm per inner-width increment (inner width +32 mm). Seven bending radii R are available: 100/125/150/175/200/250/300 mm. The number of links N is determined by the actual travel and installation method. The carriers offer smooth operation, high stability, and an attractive appearance. They guide and protect cables and oil hoses in machine tools and automated equipment and can be customized on request.

Miniature bridge-type cable carrier, outward-opening, Series 18
The Miniature Bridge-Type Cable Carrier, Outward-Opening, Series 18 is a cable carrier system designed to protect cables and hoses. Its outward-opening design makes installation and maintenance from the outside easy. The number of links per meter is determined by the pitch (links per meter = 1000 + pitch). Cable carriers are sold as complete sets, including the moving end and the fixed end. This series offers a range of inner widths and bend radii, making it suitable for various automation equipment and compact moving applications. Specifications include inner width B1, bend radius R, outer height H2, and outer width B, allowing users to select a model to suit their needs. Cable carriers are typically made from engineering plastics and are lightweight, wear-resistant, and quiet in operation.

JGA(B)55 Lightweight, Economical Cable Carrier
The JGA(B)55 series is a lightweight, economical cable carrier designed to protect and guide cables, oil hoses and pneumatic hoses during reciprocating motion in machine tools and automated equipment. JGA55 has an openable bridge-style design, while JGB55 has an openable enclosed design. The inner height is 55mm, the inner width is 50~250mm, the outer width varies with the inner width, and the pitch is 89mm. Bend radius options are 125, 150, 175, 200, 250, 300, 400 and 500mm. The product code follows the format “cable carrier code.inner width F.bend radius R.number of links N”; users can complete the model designation according to the required bend radius and number of links. The links are made of engineering plastic and are lightweight, wear-resistant, economical and easy to install.

JGA(B)62 Lightweight Economy Cable Carrier
The JGA(B)62 lightweight economy cable carrier is available in two designs: the JGA62 series with an openable bridge-style construction and the JGB62 series with an openable enclosed construction. It protects and guides cables and oil hoses in machine tools and automated equipment. Inner width: 50mm; inner height: 62mm; outer width: 93mm; outer height: 90mm. Available bend radii include 125, 150, 175, 200, 250, 300, 400 and 500mm (refer to the specification table for details). The product code format is JGA62.50.R.N, where R is the bend radius and N is the number of links. The carrier can be customized to suit the required travel distance and installation space. Made of reinforced nylon, it is lightweight, economical, wear-resistant and quiet.

QHA(B)45 Series Economical Reinforced Cable Chains
The QHA(B)45 series consists of economical reinforced plastic cable chains that offer smooth operation, high stability and an attractive appearance. They guide and protect cables and hoses in machine tools and automated equipment. The series is available in two designs: the QHA45 series has an openable bridge-type structure for quick cable installation and maintenance, while the QHB45 series has an openable enclosed structure for greater protection against dust and chips. The series has an inner width (F) of 50 mm, inner height (B) of 45 mm, outer height (C) of 82 mm and pitch (P) of 100 mm. Bending radius (R) options include 71, 100, 125, 150, 175, 200, 250, 300, 350 and up to 5000 mm. Orders are configured using the required bending radius and number of links N. The model format is QHA(B)45.inner width.bending radius.number of links.

QHA(B)55 Economy Reinforced Cable Carrier
The QHA(B)55 economy reinforced cable carrier is available in two designs: the openable QHA55 open-frame type and the openable QHB55 enclosed type. Both protect moving cables on machine tools, automated equipment and similar machinery. The carrier operates smoothly, offers high stability and has an attractive appearance. It has an inner height of 55 mm, an outer height of 86 mm, inner widths of 50, 75, 100, 125, 150, 175, 200 and 250 mm, bend radius options of 125, 150, 175, 200, 250, 300, 400 and 500 mm, and a pitch of 89 mm. When ordering, complete the product model with the required bend radius (R) and number of links (N).

SZ Series Reinforced Multi-Row Cable Carriers
SZ Series reinforced multi-row cable carriers protect cables, hydraulic hoses, pneumatic tubes and other lines in machine tools and automation equipment. Their wedge-and-tenon construction provides a stable assembly, with mounting brackets that can be installed on any face. Smooth interior surfaces minimize friction on the lines, while multiple stop points ensure smooth, stable operation. A short pitch reduces vibration and noise. Available in two-compartment or multi-compartment configurations, with open or enclosed designs, the range includes SZ35, SZ45 and SZ55 models in various internal widths and heights, external widths and heights, and bend radii. They are suitable for reciprocating applications requiring segregated routing across multiple rows and compartments.

SZ Series Reinforced Double-Row Cable Carrier
The reinforced double-row cable carrier (SZ multi-row reinforced cable carrier) guides and protects cables, oil hoses, and pneumatic lines on machine tools and automated equipment. Its wedge-and-tenon construction allows connectors to be installed on any side for flexible assembly and disassembly and a secure fit. The smooth interior minimizes wear on cables and hoses, while a multi-point stop design ensures stability during high-speed reciprocating motion. The short pitch enables smooth operation with low vibration and noise. Double- or multi-compartment configurations and open or enclosed designs are available to accommodate different numbers of cables and hoses and protection requirements. Key dimensions include inner width (F1/F2), inner height (B), outer width (f1/f2), outer height (C), bend radius (R), and pitch (P). The main models are SZ35, SZ45, and SZ55, representing three cross-sectional sizes. Their model codes are completed using options such as inner width, bend radius, and pitch. Select a size based on the outer diameter of the cables and hoses and the available installation space.

SJ Economy Double-Row Cable Carrier
The SJ economy double-row cable carrier protects cables with a double-row design, offering a choice of two or multiple compartments across its width and various open and enclosed configurations. It guides and protects cables, oil hoses and pneumatic lines on machine tools, automation equipment and other moving mechanisms. The series comes in four sizes based on inner height: SJ35, SJ45, SJ55 and SJ62, with inner heights of 35, 45, 55 and 62mm, respectively. Inner widths (F1/F2) are available in multiple options from 50~300mm; outer widths (f1) are 14.5, 16, 17.5 and 21.5mm, respectively; pitches (P) are 56, 68, 89 and 89mm, respectively; and bending radii (R) are available in multiple options from 75~500mm. When ordering, combine the carrier code SJ with the inner width F, bending radius R and number of links N to form the complete model designation. Calculate the number of links based on the actual travel and bending radius. The series is a low-cost, general-purpose double-row cable carrier solution.

SJ Economy Double-Row Cable Carrier
The SJ economy double-row cable carrier features a double-row compartment design, with two- or multi-compartment configurations and open or enclosed options. It protects and guides cables on machine tools and automated equipment. Four sizes are available by inner height: SJ35, SJ45, SJ55 and SJ62. Inner widths (F1/F2) range from 50~300mm, bending radii R from 75~500mm, and pitches from 56~89mm. Users can complete the model designation using the required bending radius (R) and number of links (N). The ordering code follows the format SJ35.F1.F2.R.N. The carrier is economical, practical, smooth-running and easy to install.

HGA Series Sliding Cable Carrier
The HGA series sliding cable carrier features an openable bridge-style design, smooth operation, high stability, and an attractive appearance. It is primarily used to protect and guide cables, oil hoses, and pneumatic lines in machine tools and automated equipment. Two sizes are available by inner height: HGA35 (inner height 35mm) and HGA45 (inner height 45mm). Inner width F ranges from 50~300mm, and bend radius R ranges from 75~300mm. The outer height is 55.5mm for HGA35 and 66mm for HGA45. The complete model designation consists of four parts: cable carrier code, inner width, bend radius, and number of links. Specify the required bend radius and number of links to complete the model designation. The openable design simplifies cable installation and routine maintenance, making it suitable for applications with frequent reciprocating motion.

WQ Series Multidirectional Cable Chains
WQ series multidirectional cable chains are injection-molded from engineering plastic. Their covers and crossbars can be opened for easy cable installation and maintenance. A mortise-and-tenon mounting structure provides secure link connections, while smooth interior surfaces minimize wear on cables and hoses. The short-pitch design reduces vibration and noise during operation, making the chains suitable for high-speed reciprocating motion. Optional integrated strain-relief connectors reduce stress at cable ends. Models range from WQ(F)40 to WQ(F)100, with A dimensions of 17.8~38 mm, pitches of 14~34.5 mm, and bending radii of 58~145 mm. Select a model based on available equipment space and cable outer diameter.

TL Series Steel Cable Carriers
TL series steel cable carriers consist of chrome-plated high-quality steel link plates, extruded aluminum alloy support plates, and alloy steel pins. Their triple-reinforced construction provides excellent resistance to deformation. During operation, they prevent cables and hoses from moving relative to the carrier or becoming twisted. They bend easily, with low resistance and noise, and resist deformation and sagging over long-term use. The chrome-plated link plates offer an attractive metallic finish and corrosion resistance. The maximum travel speed is 40 m/min, with a noise sound pressure level of no more than 68 dB at maximum speed. The safe service life is at least 1 million reciprocating cycles. The carriers meet export certification requirements such as CE/UL and can accommodate approximately 99% of CNC machine tool applications. Models range from TL45 to TL250, with pitches of 45–250 mm and inner widths of 50–1000 mm. Support plates are available in types I, II, III, and fully enclosed versions. Orders can be specified by bend radius, inner width, and outer width.

TL Type III Steel Cable Carrier
TL series steel cable carriers feature a triple-reinforced structure with excellent resistance to deformation. They guide and protect cables, oil hoses, and air hoses on CNC machine tools and other equipment. The chrome-plated side plates provide a metallic finish and corrosion resistance. With a service life of at least 1 million reciprocating cycles, the carriers meet 99% of CNC machine tool cable routing needs and comply with export certification requirements such as CE and UL. They are available with Type I, II, or III support plates; Type III is designed for heavier, thicker cables. When ordering, specify the carrier model (e.g., TL95), support plate type (III), bend radius R (e.g., 250), and support plate width dimensions, in that order. The catalog provides the following ordering example: TL95III-250x300x325.

TLGA Series Steel Cable Carrier
TLGA series steel cable carriers are designed for machine tools, mobile machinery and other equipment to carry large numbers of heavy cables and oil hoses. They can achieve long unsupported spans without support rollers. Support plates can be customized to customer requirements, with chain plate heights of 35-150mm and support plate widths of 150-600mm available as needed. The spacing between holes is 5mm, the bending radius is 50-600mm, and the maximum travel is 32m. The carrier can be lengthened or shortened as required, and its bending radius can be adjusted by changing the pivot pins. When selecting a model, the chain plate height is determined by the largest cable diameter. For widths over 300mm and lengths over 4m, selecting the next larger size is recommended for stability.

TL/TLGA Series Steel Cable Carriers
TL/TLGA series steel cable carriers support cables, oil lines, and pneumatic and hydraulic hoses in reciprocating applications such as machine tools and mobile machinery. The TLGA model can carry a large number of heavy lines over a long unsupported span, with support plates made to order. Bending radius: 50-600 mm; chain plate height: 35-150 mm; maximum travel: 32 m; support plate width: 150-600 mm; hole spacing: 5 mm. Support plates are available in one-piece, split, and frame styles, selected according to line load, connector size, and installation, removal, and maintenance requirements. Wide carriers can be fitted with a third chain plate to improve stability and separate conduits from cables.

TLGA Series Steel Cable Carriers
TLGA series steel cable carriers guide and protect cables and hoses in machine tools and automation equipment. Their steel links and adjustable support plates make them suitable for high-speed, long-travel applications. The main models are TLGA20, TLGA30, TLGA40 and TLGA50, with pitches of 75, 100, 125 and 175 mm respectively. Bending radii range from 100~700 mm, carrier widths from 70~700 mm, and maximum support plate hole diameters from 30~110 mm; the internal height is 30 mm. Support plate styles include I, II, III and full type. Depending on the style, the external width is 12~30 mm greater than the carrier width. Orders can be specified by travel length, bending radius, cable/hose diameter and mounting configuration. Ordering example: TLGA50/350x6875/350-D/E“S”.

TLGB Series Aluminum Alloy Cable Carriers
The TLGB series aluminum alloy cable carrier features support plates made from aluminum alloy profiles, providing a robust solution for applications requiring large steel cable carriers. The support plates can be custom-made to customer specifications, with a maximum width of 1200mm. Plastic dividers are supplied as standard and can be freely repositioned to create various internal compartments, offering an economical and practical solution for applications involving cables of different sizes. A foam support plate option is also available for optimal cable protection in high-speed travel applications. Long used by many automotive manufacturers, this design positions all cables within centrally located fibers. A stainless steel strip option is also available, with flexible steel strips mounted on the outside and inside to protect cables and keep the interior clean. These safe, reliable carriers are widely used to protect cables and hoses in machine tools, automotive production lines, and automated equipment.

HXSD-HD Series Cable Carriers
The HXSD-HD series is a heavy-duty cable carrier range designed for short travel, suspended applications, and installations with limited space. It features thinner links and thinner crossbars (HD45 and HD55 series), reducing weight while providing more internal space at an affordable price. Typical applications include toolboxes, warehousing and transport systems, stone-cutting machines, woodworking machines, vehicles, construction machinery, specific long-travel applications, and general mechanical engineering. Testing has demonstrated a service life of more than 10 million cycles. Inner-opening, outer-opening, and S-type designs are available. Example codes include HXSDHE5 and HXSDHE5-48-50C.

HXSD-HD Heavy-Duty Cable Carrier Series
The HXSD-HD Heavy-Duty Cable Carrier Series, also known as the HZ Cable Carrier Series, is designed for short travel distances, suspended applications, and confined spaces. The series features thinner links and thinner crossbars (HD45 and HD55 series), reducing weight while providing more interior space at an affordable price. Typical applications include toolboxes, warehousing and conveying systems, stone-cutting machines, woodworking machines, vehicles, construction machinery, specific long-travel applications, and general mechanical engineering. Testing has demonstrated a service life of over 10 million cycles. The series is available in various models, including the HXSDHE5 base model, with length suffixes such as -48-50C.

Reinforced Bridge-Type Cable Drag Chain, Side-Opening on Both Sides, Series 35
The Reinforced Bridge-Type Cable Drag Chain, Side-Opening on Both Sides, Series 35 features a multi-crossbar design with both sides opening for quick installation and maintenance of cables, air hoses, and other lines. It is made of black nylon PA6 reinforced with 30% glass fiber (PA6+G30) and operates at temperatures from -20°C to 120°C. The product comes with dedicated connectors for both the moving and fixed ends and is sold as a complete set. The pitch determines the number of links per meter (links per meter = 1000 ÷ pitch). The bending radius ranges from 50 mm to 6750 mm, and inner width B1 is available in various sizes (50 mm–6750 mm? Should the actual inner width be fixed?). It is suitable for protecting cables in a wide range of automated equipment.

XK Series Low-Noise Cable Chains
XK series low-noise cable chains are made of engineering plastic and support, guide and protect cables and pneumatic lines in machine tools, automated equipment, robots and other applications. They offer quiet operation and low wear. The covers open from both sides for easy cable installation, maintenance and replacement. Taking the XK18 as an example, it has an inner height of 18mm and an outer height of 25mm, with inner widths from 18~75mm and outer widths from 29~86mm. Bend radius options include R28, R38 and R50. The connector hole diameter is 30mm, the weight is 0.305~0.552 kg/m, and the chain has 56 links. Pitch varies with inner width and is approximately the inner width plus 10.5mm (for example, a pitch of 28.5 for an inner width of 18, and 85.5 for an inner width of 75). Larger sizes such as XK22 and XK35 are also available in the series, with connector hole spacing specified for selection based on travel length and bend radius.

XK Series Low-Noise Cable Carrier
The XK series low-noise cable carrier is molded from engineering plastic for smooth, quiet operation. It protects cables on machine tools, automated equipment, robots and more. The XK18 has an inner height of 18mm and an outer height of 25mm, with inner widths from 18~75mm (outer widths 29~86mm). Available bending radii are R28/R38/R50, with a pitch of 28.5~85.5mm, a weight of 0.305~0.552 kg/m and a connector mounting hole diameter of 30mm. Links open on both sides for easy cable installation and maintenance, and the number of links can be customized to suit the travel distance. Larger sizes, including XK22 and XK35, are also available. Specify the inner width, bending radius and length when ordering.

Silent Series Separators
Silent series separators (internal separators) are components installed inside silent engineering plastic cable carriers to separate power cables, signal cables, pneumatic tubes, hydraulic hoses and other lines within the same cavity. They prevent friction, tangling and wear during operation while complementing the low-noise design to reduce noise during high-speed reciprocating motion. Separators can be inserted at any pitch position as needed, allowing the inner width F to be divided into multiple compartments. When selecting separators, ensure compatibility with the cable carrier's inner height B, inner width F, outer height C, outer width E, bend radius R, pitch P, number of links N and JY-28 mounting bracket hole spacing. They are generally made of wear-resistant engineering plastics such as PA66 and offer self-lubricating, wear-resistant and impact-resistant properties. They are suitable for high-speed, low-noise applications involving machine tools, robots, automated production lines and material handling systems.

HXSD Silent Cable Carrier Series
The JY Series is HXSD’s silent cable carrier series. It features ultra-quiet operation and low vibration, making it ideal for linear drive modules sensitive to vibration. The cable carrier runs with virtually no polygonal effect and has been certified for ultra-quiet performance by Rheinland. A variety of sizes and separator options are available to meet the needs of different industries. Typical applications include cleanrooms, stages, printing presses, automation systems, machine tools, measuring equipment, semiconductors, and medical equipment. Service life exceeds 20 million cycles.

25 Lightweight Series Cable Chains (QS/FS/QB)
The 25 lightweight series cable chains are available in three configurations: QS (openable/semi-enclosed), FS (fully enclosed), and QB (non-openable). Made with engineering plastic links, they guide and protect cables less than 22mm in diameter. Tested service life reaches 10 million cycles. The inner and outer crossbars can be opened for easy cable inspection or replacement; vertical and horizontal separators can be added to divide the interior. Pitch is 46mm, with 22 links per meter. Chain length is calculated as S/2+K (S is the travel, K=πR+safety allowance). Bend radii range from R40 to R250, and the actual installation height is HE=H+35mm (load 1.0kg/m). This page lists the QS25 series, with inner widths of 25–103mm, an outer height of 35mm, and outer widths of 39–118mm, paired with QS25X series connectors.

GD Series Long-Span Cable Chains
The GD series long-span cable chain features a new mechanically engineered design with embedded steel pins. Its side plates have a three-layer composite construction secured by embedded steel pins, making the structure strong, easier to open and less likely to come apart. This substantially increases load capacity and unsupported length, allowing a 6 m unsupported span without sagging. A single crossbar has been load-tested to 101KG, and dividers can be added to separate cables into layers. The carefully selected metal mounting brackets are wear-resistant, durable and resistant to breakage. They can be installed on the inside or outside of the chain body (installation at the outer “A” position increases the overall width by 16mm). Mounting hole specifications are 38/44 for the distance between holes. The inner channel has smooth, rounded corners that prevent abrasion of cables and tubing and reduce friction-related wear. The series is divided by inner height into two extra-long-span subseries, GD65 and GD80: GD65 offers 16 inner widths from 50–300mm (50/60/75/90/100/110/117/125/130/150/175/200/225/250/275/300), with an outer width approximately 42mm greater than the inner width; GD80 offers dozens of inner widths from 75–340mm. All sizes in the catalog share a bending radius of R=390,

JY Cable Carrier Series
The Shengda JY cable carrier series is designed to guide and protect cables, oil hoses, and air hoses in automation equipment. Made from high-strength engineering plastics or stainless steel, these products are wear-resistant, corrosion-resistant, and quiet in operation. A variety of inner widths (B1) and bend radii (R) are available, with different styles, such as open and enclosed types, available to order. The outer height (H2), outer width (B2), mounting-hole spacing, and hole diameters accommodate a range of wiring requirements. Suitable for horizontal or vertical installation, these cable carriers are widely used in CNC machine tools, robots, and automated production lines.

SRLF Series 3D Cable Carrier
The SRLF series is a 3D cable carrier made of black PA6+G3. It bends and rotates freely in multiple directions through three-dimensional space, protecting and guiding cables and hoses on robotic automation equipment to provide a safe energy supply system. It is available in three inner widths: 65 mm, 87.5 mm, and 100 mm, with corresponding bend radii of R100, R135, and R145. The inner cavity dimensions range from 24.4 to 37.5 mm, the outer width ranges from 70.2 to 108 mm, the number of links per meter ranges from 29 to 44, and the pitch ranges from 23.1 to 34.5 mm. Operating temperature: -20°C to 120°C. Cable carrier connectors are sold as a set (moving end + fixed end); connector models are coded according to inner width and bend radius.

TL-Type Steel Cable Carrier
The TL Series steel cable carrier is made up of chain plates (chrome-plated high-quality steel), support plates (extruded aluminum alloy), and pins (alloy steel). This design prevents relative movement between the cables or rubber hoses and the carrier, avoiding twisting and deformation. The chrome-plated chain plates offer a distinctive appearance, a well-designed structure, high strength, and easy installation. High-strength, wear-resistant materials and alloy steel pins improve wear resistance. The carrier bends smoothly with low resistance and noise, and retains its shape without sagging even after prolonged use. It supports a maximum travel speed of 40 m/min, with a noise sound pressure level of no more than 68 dB and a safe service life of at least 1 million cycles (reciprocating). Suitable for machine tools and other applications, it enhances both appearance and competitiveness. Models include TL45, TL65, TL80, TL95, TL115, TL125, TL150, TL180, TL225, and TL250. Pitches range from 45 mm to 250 mm, with a choice of bend radii. Inner widths correspond to the model number (35 mm for TL45, 50 mm for TL65, and the same as the model number for all other models).

TL Series Steel Cable Carrier
The TL Series steel cable carrier is a mechanical component designed to protect cables and pipes. It is suitable for industrial applications such as machine tools and automation equipment. The series includes two models, TL115 and TL125, with pitches of 115 mm and 125 mm, respectively. The carrier is available in three designs: one-piece (Type I), top-and-bottom split (Type II), and frame-style (Type III). It supports several connection methods: standard, Type A, and Type B. The support plates can be drilled as needed to make it easier to route cables inside the carrier. The overall carrier length is calculated by multiplying the number of links by the pitch. Made of steel, it offers high strength and wear resistance, making it suitable for high-load and high-speed applications.

TLG Steel Drag Chain
TLG steel drag chains can carry large quantities of cables and oil hoses. They can run unsupported without support wheels. The bend radius ranges from 75 to 600 mm, chain plate height from 50 to 150 mm, maximum travel is 32 m, support plate width ranges from 50 to 600 mm, and the pitch is 5 mm. They are suitable for machine tools, mobile machinery, and other applications. Two configurations are available: TLGA (top and bottom sections separate) and TLGB (with removable separators). Support plates can be made to order, and bend radii from 50 to 600 mm are available. Connection hole positions follow the KRS standard.

TLE Aluminum Alloy Cable Carrier
The TLE aluminum alloy cable carrier is an excellent alternative to larger steel cable carriers. Made from aluminum alloy, it features a robust construction and support plates up to 1,200 mm wide. Movable plastic separators inside the carrier can be repositioned as needed to provide a variety of configurations for separating cables and air hoses, making the carrier especially suitable for applications with many different cable sizes. The bend radius and chain plate height can be customized to meet specific requirements, and support plates can be manufactured to the user's specifications. This series is suitable for machine tools, mobile machinery, and other equipment. It can be freely suspended, and its length can be extended or shortened. Compared with steel cable carriers, the aluminum alloy version is lighter and offers a high load capacity.

HGA45 Sliding Cable Carrier
The HGA45 series sliding cable carrier features an openable bridge-style design that protects and guides cables, oil hoses, pneumatic hoses and other lines on machine tools and automated equipment. It offers smooth operation, high stability and an attractive appearance. The inner height (B) is 45mm and the outer height (C) is 66mm. Inner widths (F) are available in 50, 60, 75, 80, 90, 100, 110, 125, 130, 150, 175, 200, 225, 250 and 300mm, with corresponding outer widths (E) ranging from 82mm to 332mm. Bend radius (R) options are 100, 125, 150, 175, 200, 250 and 300mm. Select the inner width, bend radius and number of links (N) according to the available installation space and application requirements to complete the model number. The ordering format is HGA45-inner width-bend radius-number of links. The series also includes the HGA35, with an inner height of 35mm, for selection according to load and routing requirements.

HGA55 Series Sliding Cable Carrier
The HGA55 series is a sliding cable carrier made of engineering plastic with an openable bridge-style design. It guides and protects cables, oil hoses and pneumatic lines on moving parts of machine tools, automated equipment, robots and other machinery. The inner height B is 55 mm, and the inner width F is available in 8 sizes: 50, 75, 100, 125, 150, 175, 200 and 250 mm. The corresponding outer width E is 85~285 mm, the outer height C is 85 mm, and the pitch P is 89 mm. The bridge-style structure opens for easy cable installation and maintenance, offering smooth operation, high stability and an attractive appearance. Bend radius R options are 125, 150, 175, 200, 250, 300, 400 and 500 mm. The number of links N is determined by the actual travel distance and installation space. Write the complete model in the order “cable carrier code-inner width-bend radius-number of links”.

HGA62 Series Sliding Cable Carrier
The HGA62 series consists of openable, bridge-style sliding cable carriers (drag chains) with a uniform inner height of 62mm and outer height of 90mm. Inner widths range from 50/75/100/125/150/175/200/250mm, with corresponding outer widths of 93~293mm. These carriers operate smoothly, offer high stability, and have an attractive appearance. They are primarily used to protect and guide cables, oil hoses, and air hoses in machine tools and automated equipment, and support long-travel sliding operation. The complete model designation is formed as “carrier code HGA62 - inner width(F) - bending radius(R) - number of links(N)”. The bending radius and number of links must be specified according to actual operating conditions. The product codes listed in the table (such as HGA62.50.R.N) provide reference dimensions for inner width, inner height, outer width, and outer height to help determine the main specifications during selection.

HXSD03 Series Cable Drag Chains
The HXSD03 series cable drag chain is an industrial accessory designed to protect cables and tubing. It is available in two versions: HXSD03B and HXSD03C. The HXSD03B offers various inner widths (11 mm, 10 mm, and 20 mm) and bend radii (R18, R28, and R38) to suit different wiring needs. The HXSD03C is a side-opening version with an inner width of 10 mm, an inner height of 15 mm, bend radii of R18 and R38, an outer height of 15.6 mm, and an outer width of 22.1 mm. It comes with mounting connectors. This series is suitable for automation equipment, machine tools, and other applications, helping extend cable service life.

HXSD17 Series Plastic Cable Drag Chain
The HXSD17 Series is a side-opening plastic cable drag chain designed to guide and protect cables, air hoses, and oil hoses in automated machinery. It is available in a range of combinations, with inner widths of 20–75 mm and bend radii of R20–R60. The outer height is fixed at 35 mm, and hole diameters and spacing are standardized for each specification. Made from engineering plastic, the chain is wear-resistant and strong, helping reduce cable bending stress and extend service life. It is easy to install and features F-type connectors for convenient assembly. Common applications include cable management for machine tools, robots, and electronic equipment.

HXSD19 Series Cable Drag Chains
The HXSD19 Series comprises engineering plastic cable drag chains with an inner width of 25 mm, suitable for protecting cables in a variety of industrial automation applications. Models are available with bend-radius options from R40 to R200, corresponding to bend radii of 60 mm, 55 mm, 75 mm, 100 mm, 150 mm, 175 mm, and 200 mm. Dedicated connectors are also available, such as HXSD19-25-25C. The chains have outer heights ranging from 40 mm to 120 mm and outer widths from 42 mm to 117 mm; hole diameters and spacing vary by model. With excellent wear resistance and flexibility, this series is widely used for cable management in machine tools, robotics, automated production lines, and other applications.