Lightweight Economical Cable Carriers

18 Series Lightweight Cable Carriers (BF18/QS18)

18 Series Lightweight Cable Carriers (BF18/QS18)

The 18 Series lightweight plastic cable carriers include the BF18 (semi-enclosed, non-opening and opening designs) and QS18 models. Inner height: 18mm; inner width: 18mm / 25mm; outer height: 24mm; outer width: 29mm / 36mm. The standard bend radius is R28, with R38, R48, R60 and R75 also available. Pitch: 33.5mm; 30 links per meter; weight: approximately 0.313~0.351 kg/m. The carriers run smoothly and quietly, with a tested service life of up to 10 million reciprocating cycles. The outer side plates open for easy cable inspection or replacement. Suitable for cables up to 16mm in diameter. Calculate chain length using L = S/2 + K, where K = π·R + safety allowance. Refer to the table for H, D and K values for each bend radius. Actual installation height H_F = H + 24mm (load 0.5kg/m).

BF15/QS15 Series Lightweight Cable Carriers

BF15/QS15 Series Lightweight Cable Carriers

The BF15/QS15 series consists of lightweight engineering plastic cable carriers designed to guide and protect cables under 12mm in diameter. They operate smoothly and quietly, with a tested service life of up to 10 million cycles. The outer crossbars can be opened for easy cable inspection or replacement. The series is available in three configurations: semi-enclosed, non-opening and openable. All have an inner height of 15mm, with inner widths of 15/20/30/40/50mm, outer widths of 24~59mm, an outer height of 20mm and bend radii of R28/R38/R48. The pitch is 22mm, with 45 links per meter. Chain length is calculated as S/2+K (S is the travel distance, K=π·R+safety allowance). For R28/38/48, the respective K values are 140/160/200, H values are 76/96/116 and D values are 58/68/78. The actual installation height is HF=H+20mm (load 0.3kg/m). Connector options include BF15X15, BF15X20, BF15X30, BF15X40, BF15X50, QS15X15, QS15X20 and QS15X30, and

QZ80 Series Heavy-Duty Cable Chain

QZ80 Series Heavy-Duty Cable Chain

The QZ80 series is an open-frame cable chain with openable crossbars. It runs smoothly and offers high stability.

Lightweight Economy Cable Carrier

Lightweight Economy Cable Carrier

The lightweight economy cable carrier is a flexible protective chain that guides and protects moving cables, pneumatic lines, and hydraulic hoses in machine tools, automation equipment, and robotics. Designed for low weight and cost, the series offers six structural features: mounting brackets that can be attached in any direction on any surface for flexible installation; smooth interior surfaces that minimize wear on cables and hoses; crossbars and side plates with a double-locking connection for strong pull-out resistance and stable operation; interlocking side plates that provide high overall rigidity and stability when assembled; noise-reducing brakes for quiet operation; and a range of optional strain-relief accessories, such as clamps, separators, and comb plates, that can be configured to suit the cable and hose layout. It is suitable for reciprocating applications with short to medium travel and moderate loads. Users can select a model based on inner width, inner height, bend radius, travel length, and mounting method.

JGA(B)45 Series Lightweight, Economy Cable Chains

JGA(B)45 Series Lightweight, Economy Cable Chains

JGA(B)45 series lightweight, economy cable chains are injection-molded from engineering plastic. They have an inner height of 45mm, an outer height of 66mm, and a pitch of 68mm. Inner widths range from 50~300mm, with corresponding outer widths of 82~332mm, across 15 inner width options. Bend radii of 100, 125, 150, 175, 200, 250, and 300mm are available. Select the R value according to travel distance and installation space, along with the appropriate number of links N. Two designs are available: the JGA45 series is an open-style chain that can be opened, while the JGB45 series is an enclosed chain that can be opened. Both make it easy to install and maintain cables, hydraulic hoses, and pneumatic hoses. The chains run smoothly, offer high stability, and have an attractive appearance. They are suitable for guiding and protecting moving cables on machine tools, automated equipment, robots, and more. When ordering, use the JGA(B)45-F-R-N code, specifying the chain code, inner width F, bend radius R, and number of links N in sequence.

JGA(B)45 Series Lightweight, Economical Cable Carriers

JGA(B)45 Series Lightweight, Economical Cable Carriers

The JGA(B)45 series consists of lightweight, economical engineering-plastic cable carriers available in two designs with the same 45 link height: the JGA45 openable type has links that flip open for easy cable installation and maintenance, while the JGB45 enclosed openable type has an enclosed exterior that can be opened. Both have identical overall dimensions and pitch. All models have an inner height B of 45 mm, an outer height C of 66 mm, and a pitch P of 68 mm. Inner width F ranges from 50~300 mm in 15 options, with corresponding outer width E from 82 mm to 332 mm, increasing by approximately 25.5 mm per inner-width increment (inner width +32 mm). Seven bending radii R are available: 100/125/150/175/200/250/300 mm. The number of links N is determined by the actual travel and installation method. The carriers offer smooth operation, high stability, and an attractive appearance. They guide and protect cables and oil hoses in machine tools and automated equipment and can be customized on request.

JGA(B)55 Lightweight, Economical Cable Carrier

JGA(B)55 Lightweight, Economical Cable Carrier

The JGA(B)55 series is a lightweight, economical cable carrier designed to protect and guide cables, oil hoses and pneumatic hoses during reciprocating motion in machine tools and automated equipment. JGA55 has an openable bridge-style design, while JGB55 has an openable enclosed design. The inner height is 55mm, the inner width is 50~250mm, the outer width varies with the inner width, and the pitch is 89mm. Bend radius options are 125, 150, 175, 200, 250, 300, 400 and 500mm. The product code follows the format “cable carrier code.inner width F.bend radius R.number of links N”; users can complete the model designation according to the required bend radius and number of links. The links are made of engineering plastic and are lightweight, wear-resistant, economical and easy to install.

JGA(B)62 Lightweight Economy Cable Carrier

JGA(B)62 Lightweight Economy Cable Carrier

The JGA(B)62 lightweight economy cable carrier is available in two designs: the JGA62 series with an openable bridge-style construction and the JGB62 series with an openable enclosed construction. It protects and guides cables and oil hoses in machine tools and automated equipment. Inner width: 50mm; inner height: 62mm; outer width: 93mm; outer height: 90mm. Available bend radii include 125, 150, 175, 200, 250, 300, 400 and 500mm (refer to the specification table for details). The product code format is JGA62.50.R.N, where R is the bend radius and N is the number of links. The carrier can be customized to suit the required travel distance and installation space. Made of reinforced nylon, it is lightweight, economical, wear-resistant and quiet.

25 Lightweight Series Cable Chains (QS/FS/QB)

25 Lightweight Series Cable Chains (QS/FS/QB)

The 25 lightweight series cable chains are available in three configurations: QS (openable/semi-enclosed), FS (fully enclosed), and QB (non-openable). Made with engineering plastic links, they guide and protect cables less than 22mm in diameter. Tested service life reaches 10 million cycles. The inner and outer crossbars can be opened for easy cable inspection or replacement; vertical and horizontal separators can be added to divide the interior. Pitch is 46mm, with 22 links per meter. Chain length is calculated as S/2+K (S is the travel, K=πR+safety allowance). Bend radii range from R40 to R250, and the actual installation height is HE=H+35mm (load 1.0kg/m). This page lists the QS25 series, with inner widths of 25–103mm, an outer height of 35mm, and outer widths of 39–118mm, paired with QS25X series connectors.