Pneumatic Components

0927 Series Solenoid Valves
The 0927 Series is a two-position, two-way, pilot-operated (normally closed) diaphragm solenoid valve with a stainless steel body. It is suitable for water, oil, gas, and other media. Thread options include G thread (standard) or NPT thread (T). Operating voltage options are AC 220 V (A), AC 110 V (B), and DC 24 V (C). Its compact design and reliable operation make it widely used in automation controls and industrial piping systems.

100M Series Base
These bases are designed for use with 100/200/300/400 series modules or valve plates. Made of aluminum alloy, they are available in a range of dimensions to suit different installation requirements. The ordering code consists of the series designation (100M/200M/300M/400M) and the F code for the number of stations (any number). The dimensional tables list the installation dimensions for each model, including A, B, C, E, F, G, H, K, M, R, S, W, X, Y, and threaded port Q. Dimension L is calculated based on the number of stations N (for example, for 100M-□F, L = (N-1) × 19 + 38). The bases support any number of stations, making them adaptable to a wide range of applications.

1730 Series Stopper Cylinders
1730 series stopper cylinders position, stop and cushion pallets or workpieces on automated conveyor lines. They provide stopping, cushioning and downward reset functions. The series includes F1730 and YGZX designs, with sizes such as 25.30, 25.35, 50.50, 32-40 and 50-50. Stopping loads range from 150~2000kg, with a stopping stroke of approximately 30~50mm and a lowering stroke of approximately 26~45mm. Options include no cushioning, spring cushioning and hydraulic cushioning to suit different impact energies and cycle times. Select the size and cushioning type based on the load, conveyor speed, stopping frequency and installation space.

200M Series Base
The 200M Series Base is designed for 200 Series pneumatic valves and provides mounting and connection functions. The order code is 200M-F, with any number of stations available (F). The dimensional table lists the overall dimensions: A=61mm, B=51mm, C=21mm, E=4.3mm, F=22.4mm, G=23mm, H=6mm, K=170mm, M=189mm, R=43mm, S=32mm, W=92.5mm, X=26mm, Y=35mm. The threaded port is G1/4".

2L Series Fluid Control Valve (2-Way, 2-Position)
The 2L series fluid control valve is a direct-acting, normally closed, 2-way, 2-position solenoid valve for on/off control of air, water, steam and other media. It has a brass body and an EPDM seal. It is suitable for liquids with a viscosity below 20CST, with an operating pressure range of 0~1.5MPa, a maximum pressure rating of 1.5MPa, an operating temperature range of -5~185℃ and a voltage tolerance of ±10%. Available flow orifice diameters include 17, 22, 30 and 50mm, with corresponding Cv values of 4.8~48 m³/h and port sizes from 1/2″ to 2″. The model designation consists of the main model (2L+flow orifice diameter code) and the port size code. For example, 2L170-15 indicates a 17mm flow orifice and a 1/2″ port. Contact the manufacturer for custom voltages and specifications.

2P Series Fluid Control Valves (2-Port, 2-Position)
The 2P series consists of direct-acting, normally closed, 2-port, 2-position solenoid valves that switch quickly and responsively when energized. They are compact, small, lightweight, and easy to install and remove. The orifice diameter is 2.5mm, the Cv value is 0.23, and port sizes are G1/8 (2P025-06) and G1/4 (2P025-08). Suitable media include air, water, and oil, with a fluid viscosity below 20CST. Operating pressure is 0-0.7MPa, proof pressure is 1.05MPa, and valve response time is less than 0.03 seconds. The body is made of nylon 66 and the seals are VITON. The valve uses a 2P025 solenoid coil and supports AC 50/60Hz and DC. The allowable voltage range is ±10%~±15%, power consumption is 7.0VA, insulation is Class B, and the socket diameter is Φ35. The coil is rated IP65 and is available with terminal or lead-wire connections.

2Q Series Solenoid Valves
The 2Q series consists of direct-acting two-way solenoid valves suitable for air, water, oil, gas and other media. The body is made of brass, and the seal is made of polytetrafluoroethylene (PTFE). The operating temperature range is -5~100℃, and the fluid viscosity must be below 50CST. The operating pressure is 0~7MPa, the maximum pressure rating is 10.5MPa, and the control pressure is 3~6MPa. The valves are available in three flow orifice sizes: 22, 35 and 50mm, with corresponding Cv values of 12, 24 and 48. Port sizes include 3/4", 1", 1-1/2" and 2", with control port sizes of 2-G1/8" or 2-G1/4". Contact the manufacturer for custom voltages and specifications.

2S Series 2/2-Way Solenoid Valves
The 2S series 2/2-way solenoid valves are available in direct-acting and stroke-limit switch versions. Key models include 2S-040-10, 2S-200-20, and 2S-200-20D. Designed for pneumatic control systems, they switch fluid flow on and off. Their compact construction and fast response make them widely used in automation equipment and industrial piping systems.

2S Series Solenoid Valves
The 2S series consists of two-way solenoid valves with stainless steel bodies and stainless steel seals, as specified in the catalog. They are designed for on/off control of water, air, and other media in piping systems requiring corrosion resistance. The sizes listed on this page are 25-08 and 25-10 (corresponding to the common 08 and 10 port size categories). The nominal maximum working pressure column lists values including 3, 4, and 0.5MPa, indicating that the series covers pressure ratings from low-pressure air lines to medium-pressure liquid lines. Confirm the appropriate rating for the actual medium and pressure when selecting a valve. Both the body and seals are stainless steel, helping reduce corrosion of internal components and extend service life. The valves have a two-position, two-way, normally closed design: they open when energized and close when de-energized. They can be installed horizontally or vertically in the pipeline. The model column is missing from the scanned table, so refer to the product label or complete catalog for the exact model code. Multiple coil voltages, wiring methods, and connection thread sizes are also available within the series and must be specified when ordering.

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)
The 2S series comprises direct-acting, 2-port, 2-position solenoid valves with one inlet and one outlet. The solenoid coil directly actuates the valve element, allowing the valve to open at zero differential pressure without pilot pressure. These valves provide on/off control for neutral fluids such as air, water and oil. The direct-acting design ensures reliable operation even at low inlet pressures or under vacuum, with fast response, simple construction and easy maintenance. Valve bodies are typically made of brass or engineering plastic, with NBR/EPDM seals to suit different media. The series offers multiple flow orifice and connection sizes, with connection sizes from M5 to 2". The typical operating pressure range is 0~1.0MPa (up to 1.5MPa for some sizes), and the medium temperature range is approximately -5~80℃ (up to 185℃ for high-temperature versions). Common coil voltages are DC12V/DC24V/AC110V/AC220V, with an allowable voltage fluctuation of ±10%. These valves are widely used for fluid on/off control in automation equipment, water treatment, packaging machinery, medical devices and pneumatic control systems. When selecting a valve, confirm the medium, connection size, flow orifice size (Cv value), operating differential pressure and coil voltage. Contact the manufacturer for custom voltages or specifications.

2V/2P Series 2-Position, 2-Way Solenoid Valve
The 2V/2P series 2-position, 2-way solenoid valve features direct-acting operation and is suitable for compressed air filtered to 40 microns. The series includes two types, 2V and 2P, with orifice sizes of 010 (1.0 mm) and 025 (2.5 mm). Port sizes are available in M5, 1/8 in. (06), and 1/4 in. (08). The operating pressure is 0–8.0 kgf/cm², and the operating temperature is -5 to 50°C. It has an IP65 protection rating and terminal-style wiring. A wide range of voltages is supported: 12/24 V DC and 24/36/110/220/380 V AC (50/60 Hz). Power consumption is low: 2.0 VA at 220 V AC and 3.0 W at 24 V DC. The maximum operating frequency is 10 cycles per second, and the insulation class is F.

2V Series 2-Way, 2-Position Solenoid Valves
The 2V series of 2-way, 2-position solenoid valves includes the 2V025, 2V130 and 2V250 subseries, all normally closed. The direct-acting 2V025 is lightweight and compact, with fast, responsive switching. It has a Φ2.5mm orifice, a CV value of 0.23, PT1/8 and PT1/4 port sizes, and an operating pressure of 0-1.0MPa. The diaphragm pilot-operated 2V130 and 2V250 offer low power consumption and high flow rates. Their respective orifice diameters are Φ13mm and Φ25mm, CV values are 6.20 and 13.00, port sizes are PT3/8 and PT1/2 for the 2V130 and PT3/4 and PT1 for the 2V250, and operating pressure is 0.05-1.0MPa. The valve bodies are nickel-plated brass. The 2V025 uses VITON fluoroelastomer seals, while the 2V130 and 2V250 use NBR seals. The valves have a class B heat resistance rating, a proof pressure of 1.5MPa and a response time of less than 0.05 seconds. Suitable media include air, water and oil. PT threads are standard, with NPT and G threads available as options. Electrical connections are available in DIN connector or lead wire configurations, with a range of standard voltages.

2V Series 2-Position, 2-Way Solenoid Valves
The 2V series consists of 2-position, 2-way, direct-acting, normally closed solenoid valves for air, water, and oil, with an operating pressure range of 0-1.0MPa (0-145psi). Three sizes are available by flow orifice diameter: 2V025 (2.5mm, Cv 0.23), 2V130 (13.0mm, Cv 6.20), and 2V250 (25.0mm, Cv 13.00), with port sizes from PT1/8 to PT1. The valves are direct-acting and normally closed, providing on/off control for a variety of fluid lines. DIN connector and lead-wire versions are available to suit different installation requirements. They are widely used in automated equipment, water, air, and oil lines, and general industrial fluid control applications.

2W/2P Series 2-Way, 2-Position Fluid Control Valves
The 2W/2P series 2-way, 2-position fluid control valves are direct-acting, normally closed solenoid valves for on/off control of air, water, oil, steam, and other media in pipelines. The 2P series (2P025-06, 2P025-08) has a nylon 66 body, VITON seals, a 2.5mm flow orifice, a Cv value of 0.23, G1/8 and G1/4 port sizes, and a response time below 0.03 seconds. Its coil has Class B insulation and IP65 protection, with direct wire leads for electrical connection. The 2W series (2W025~2W500) has a brass body and NBR or VITON oil seals, with flow orifices from 2.5~50mm, Cv values of 2.3~76, and port sizes of 1/8"~2". Its operating pressure is 0~0.7MPa, maximum proof pressure is 1.0MPa, operating temperature is -5~100℃, and voltage tolerance is ±10%. These valves switch quickly, have a compact, small design, and are easy to install and remove. They are widely used for automated fluid pipeline control.

2W Series 2/2-Way Solenoid Valve
The 2W Series direct-acting 2/2-way solenoid valve is designed for low-pressure fluid control, with air, water, oil, and gas as suitable media. The valve body is made of brass, and the seal is available in NBR, EPDM, or VITON. The operating pressure range is 0–7 kgf/cm², the maximum pressure is 10 kgf/cm², and the operating temperature range is -10 to 80°C. Various orifice sizes (2.5 mm, 4.0 mm, and 16 mm) and port sizes (1/8", 1/4", 1/2", etc.) are available. Choose a normally closed or normally open configuration, with AC 110 V or AC 220 V options.

2W Series Solenoid Valves
2W series solenoid valves are suitable for a range of media, including air, water, oil, and gas. They are widely used in automation, water treatment, and petrochemical applications. The series is available in multiple port sizes, including 2W160-10, 2W160-15, 2W200-20, 2W250-25, 2W350-35, 2W400-40, and 2W500-50, to meet different flow requirements. The compact valve body operates reliably and enables remote on/off control.

2W Series 2-Port, 2-Position Solenoid Valve
The 2W series consists of normally closed, 2-port, 2-position solenoid valves for on/off control of fluids such as air, water, and oil. The catalog identifies the series with the specification code 2W and provides a symbol table explaining the model code positions: the first position is the specification code 2W (2-port, 2-position, normally closed), followed in order by the flow orifice diameter (Φmm), working medium, operating method, and type. These sections are written together to form the complete model number. When selecting a valve, use the flow orifice diameter to determine the nominal bore and flow capacity, then select the appropriate code positions based on the working medium (air, water, oil, etc.), operating method (direct-acting, pilot-operated, etc.), and mounting type. The OCR text on this page is severely degraded and repetitive; only the specification code 2W and flow orifice code 160 can be clearly identified. The available values for the remaining positions (working medium, operating method, and type) were not fully preserved in the source and must be supplemented from the complete catalog page before model codes can be assembled. This entry should not be used as a complete selection reference at this time.

2WH Series 2-Way Solenoid Valve (High-Pressure Direct-Acting)
The 2WH Series comprises high-pressure, direct-acting 2-way solenoid valves suitable for air, water, oil, gas, and other media. The operating pressure range is 0–7 bar, with a maximum pressure rating of 10 bar and an operating temperature range of -10 to 80°C. The body is made of brass, and the seal is available in NBR, EPDM, or VITON. These valves feature a direct-acting, normally closed design, offering a simple construction and fast response. They are suitable for automation applications requiring direct operation under high pressure.

300M Series Base
The 300M Series Base is a mounting base for 300 Series sub-base valves, providing air-line connections and mechanical support. Made of aluminum alloy, it features a compact design and can be configured with any number of stations to suit different valve assembly requirements. Overall dimensions vary depending on the number of stations. See the dimension table for details, including key dimensions such as width A, length B, and height H. Its rated pressure is suitable for low-pressure pneumatic systems. Standardized mounting holes and port specifications make integration easy.

395 Series Round Containers
The 395 Series round containers are used for pressure setting and piping connections in pneumatic systems. Models include 395.211, 395.251, 395.261, 395.281 and 395.291, with bore sizes of 6, 8, 10, 15, 20 and 25 mm and pipe connections of G1/8, G1/4, G3/8, G1/2, G3/4 and G1. All models have a set pressure range of 0.05–1.0 MPa, a maximum working pressure of 1.0 MPa, and an ambient and medium temperature range of 0–+50℃. The dimensional table provides installation and connection dimensions A/B/C/D/E/F/G/J/K/L/V to support selection by bore size, port thread and available installation space.

396 Series Lubricators
The 396 series lubricator is a pneumatic air preparation component that atomizes lubricating oil and carries it with compressed air to downstream pneumatic equipment to lubricate moving parts. The series is available in six port sizes: 6, 8, 10, 15, 20, and 25 mm, with corresponding G1/8, G1/4, G3/8, G1/2, G3/4, and G1 connection threads. Bowl capacities are 40, 120, and 300 cm³, the maximum operating pressure is 1.0 MPa, and the ambient and medium temperature range is 0~+50℃. Before installation, blow the piping clean with air. Pipe fittings and vertical installation are recommended to ensure a stable oil mist output.

397 Series Filter Regulators
397 series filter regulators combine a filter and a pressure regulator to filter and regulate the air supply in pneumatic lines. Bore sizes range from 6~25 mm, with connection threads from G1/8~G1, a pressure setting range of 0.05~1.0 MPa, a maximum working pressure of 1.0 MPa, and bowl capacities of 40/120/300 cm³. The ambient and media temperature range is 0~+50℃. Depending on the model, filtration ratings include 50-75 μm, 25-50 μm, 10-25 μm, and 5-10 μm. Before installation, blow out the piping, use suitable fittings, and install the unit vertically wherever possible.

398 Series Air Filter Combination
The 398 Series air filter combination integrates an air filter, a pressure reducing valve (pressure regulator), and a lubricator into a three-piece air preparation unit. It filters and cleans compressed air, regulates pressure, and provides oil mist lubrication. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit should be installed vertically. The entire series has a pressure adjustment range of 0.05~1.0MPa, a maximum working pressure of 1.0MPa, and an ambient and media temperature range of 0~+50℃. The standard filter pore size is 50~75μm, with 25~50μm, 10~25μm, and 5~10μm options. Six connection pipe sizes are available: 6, 8, 10, 15, 20, and 25mm, corresponding to G1/8", G1/4", G3/8", G1/2", G3/4", and G1" threads. Overall and mounting dimensions A, B, C, D, E, F, Z, G, V, N, and M are provided to facilitate piping and bracket layout.

399 Series Air Filter Combination
The 399 series air filter combination (three-piece air preparation unit) consists of an air filter, pressure regulator and lubricator. It filters compressed air, regulates pressure and provides oil mist lubrication in compressed air lines. Connection sizes are 6mm, 8mm, 10mm, 15mm, 20mm and 25mm, corresponding to G1/8"~G1" threads. The pressure setting range is 0.05~1.0MPa, the maximum working pressure is 1.0MPa, and the ambient and medium temperature range is 0~+50℃. The standard filtration rating is 50~75μm; precision filter elements rated 25~50μm, 10~25μm and 5~10μm are also available. The valve body comes in three sizes according to port size, with M30×1.5, M50×1.5 and M67×1.5 mounting threads. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit must be installed vertically.

3A/4A Series Air-Controlled Valves
The 3A/4A series consists of pneumatic directional control valves, including 3A 3-port, 2-position valves; 4A 5-port, 2-position valves; 3H 3-port, 3-position valves; 4H 5-port, 3-position valves; and 3R/4R series manually operated valves. Valve bodies are available in the 100, 200, 300, 400, 1000/2000/3000/4000, and 10000/20000/30000/40000 series sizes, with various air control methods, port sizes, and initial states, such as NO (normally open). They are suitable for directional switching and pilot control in pneumatic circuits on automated equipment. Model numbers combine the series code, series size, air control method, port size, initial state, and other fields. Confirm both the port size and control method when selecting a model.

3A Series Solenoid Valves
The 3A series comprises two-position, three-way, internally piloted solenoid valves designed for compressed air filtered to 40 microns. The operating pressure range is 0.15–0.8 kgf/cm², and the operating temperature range is -5 to 50°C. The maximum switching frequency is 5 cycles per second, with a minimum energization time of 0.05 seconds. The series includes four basic sizes: 100, 200, 300, and 400. It offers single-solenoid, two-position and double-solenoid, two-position configurations, with port sizes ranging from M5 and PT1/8 to PT1/4, PT3/8, and PT1/2. The initial position is available as normally closed (NC) or normally open (NO). Effective sectional area varies by series and specification, from 5.5 mm² to 50 mm². These valves are widely used in automated pneumatic control systems.

3A100 Series 3-Port, 2-Position Air-Operated Valves
The 3A100 series consists of externally piloted 3-port, 2-position air-operated valves with a spool design for reliable sealing and responsive operation. Double-piloted models have a memory function. The specially machined bore reduces friction and starting pressure, extends service life, and requires no lubrication. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.8MPa (21~114psi), the pressure retention/proof pressure is 1.2MPa, and the operating temperature is -20~70℃. The body is made of aluminum alloy, and the maximum operating frequency is 5 cycles/second under no load. Port sizes are M5 and PT1/8 (06). Basic models include 3A110 (2-position, single-piloted) and 3A120 (2-position, air-operated). G and NPT port threads are available; leave the thread code blank for M5 ports. The valves can be mounted in multiple orientations and integrated with a manifold to save installation space.

3A200 Series Air-Operated Valves
The 3A200 series comprises 3-port, 2-position externally air-operated valves for directional control in pneumatic circuits using compressed air. The working medium must be filtered through a filter rated 40μm or above. Port sizes are PT1/8 and PT1/4, with an effective area of 14.0~16.0mm² and corresponding Cv values of 0.76~0.69. The operating pressure range is 0.15~0.8MPa, the proof pressure is 1.2MPa, and the operating temperature range is -20~70℃. The body is made of aluminum alloy, the maximum operating frequency is 5 cycles/second, and no lubrication is required. Standard models include 3A210-06, 3A220-06, 3A210-08, and 3A220-08. Their compact design makes them suitable for pneumatic circuit control in automated equipment.

3A300 Series Air-Operated Valves (3-Port, 2-Position)
The 3A300 series consists of 3-port, 2-position externally air-operated directional valves. External pilot air pressure shifts the valve spool, making these valves suitable for dusty or damp environments and applications where solenoid coils are unsuitable. The valve body is made of copper alloy, and the working medium is compressed air filtered through a 40μm or finer filter. Lubrication is not required; if lubrication is used, it must be supplied continuously, with ISO VG32 or equivalent oil recommended. The operating pressure range is 0.15~0.8MPa (21~114psi), proof pressure is 1.2MPa (175psi), effective area is 25.0mm² (Cv=1.39), maximum operating frequency is 5 cycles/second (no load), and operating temperature is -20~70℃. Port sizes are available in -08 (PT1/4) and -10 (PT3/8), with G or NPT threads optional. Common models include 3A310-08, 3A220-08, 3A310-10, and 3A320-10. They are widely used for cylinder directional control, blow-off and waste removal, and pneumatic control on automated production lines.

3H/4H Series Hand Lever Valves
The 3H/4H series hand lever valves are manually operated directional control valves for pneumatic control systems. The 3H is a three-port, two-position valve (three-position, three-way), while the 4H is a five-port, two-position valve (two-position, five-way). The series is available in 100, 200, 300, and 400 sizes, corresponding to different flow capacities. The position code is fixed at 10 (single/double position). Port sizes are G1/8, G1/4, G3/8, and G1/2, represented by codes 06, 08, 10, and 15, respectively. The working medium is compressed air. These valves are widely used to switch air circuits in automation equipment.

3H Series Hand-Operated Valve
The 3H series hand-operated valve is a manually operated, direct-acting, two-port, two-position pneumatic valve. Its spool is driven directly by hand to switch airflow on and off. The working medium is air filtered through a screen rated at approximately 40μm or above; no lubrication is required. Port sizes include G1/8, G1/4, G3/8 and G1/2, with effective flow areas of 14.0~50.0mm² (Cv 0.78~2.79) to suit different flow requirements. The operating pressure range is 0~0.8MPa (0~114psi), proof pressure is 1.2MPa (170psi), and operating temperature is -50~60℃. The body is made of aluminum alloy. G and NPT port threads are available. The valve is suitable for manual switching, exhaust and commissioning in various pneumatic control circuits.

3L/4L Series Hand-Pull Valves
The 3L/4L Series Hand-Pull Valve is a manually operated pneumatic directional control valve used to control airflow and switch flow direction. The 3L is a 3-port, 2-position valve, while the 4L is a 5-port, 2-position valve. The series is available in four sizes—100, 200, 300, and 400—with different valve body dimensions and flow rates. Connection sizes include G1/8", G1/4", G3/8", and G1/2". The position code is fixed at 10 (single/double position). The valve body is made of aluminum alloy for easy operation and reliable sealing. These valves are widely used for manual control in automation equipment and pneumatic systems.

3R/4R Series Hand-Pull and Hand-Rotary Valves
The 3R/4R series hand-pull and hand-rotary valves are manually operated pneumatic control valves used to open, close, or redirect airflow. Hand-pull valve models include 3R210-08, 3R310-10, 4R210-08, and 4R310-10, with port sizes of 1/4 and 3/8. Hand-rotary valve models include K34R6-08A, K34R6-08D, and K34R6-08S, with a G1/4 port size. These valves are suitable for pneumatic circuits without electrical power or requiring manual intervention, and can control cylinder movement and airflow. Compact and easy to operate, they are commonly used in automated equipment, fixtures, and packaging machinery.

3R Series Hand-Pull Valve (3-Port, 2-Position)
The 3R series consists of 3-port, 2-position, direct-acting hand-pull pneumatic directional control valves for pneumatic circuits requiring manual positioning or holding. The working medium is air filtered through a 40μm or finer filter. Port sizes range from PT1/8 to PT3/8, with effective areas of 12.0~30.0mm² (Cv=0.67~1.67). Operating pressure is 0~1.0MPa, proof pressure is 1.5MPa, and operating temperature is -50~70℃. The body is made of aluminum alloy. The model designation comprises 3R, the series code, position code, port size, and thread type code. Thread options are PT, G, and NPT. Lubrication is optional; if used, ISO VG32 is recommended and lubrication must not be stopped once started.

3V/3V1/2V/2P Series Solenoid Valves
3V/3V1/2V/2P series solenoid valves control airflow and switch its direction in pneumatic control circuits. The catalog lists models including 3V110-06, 3V120-06, 3V210-08, 3V220-08, 3V310-10, 3V320-10, 3V410-15, and 3V420-15, with port sizes of 1/8, 1/4, 3/8, and 1/2 for pneumatic systems with different pipe diameters. Model codes distinguish specifications and port sizes. These valves are commonly used in automated equipment, jigs and fixtures, and general-purpose pneumatic systems. This page provides only model numbers and port sizes; confirm the voltage, valve function and number of positions, and seal material using the ordering instructions.

3V Series 3/2-Way Solenoid Valves
The 3V series 3/2-way solenoid valves are available in direct-acting and pilot-operated subseries. The direct-acting 3V1 series is designed for small port sizes and drives the spool directly for fast response. The pilot-operated 3V100/200/300/400 series uses a pilot head to control the main valve and is suitable for larger port sizes. Port sizes include 1/8", 1/4", 3/8", and 1/2". Available voltage options include DC 12 V, DC 24 V, AC 24 V, AC 36 V, AC 110 V, AC 220 V, and AC 380 V. The valves have an IP65 protection rating and Class F insulation, operate at temperatures from -5 to 50°C, and have a working pressure range of 0–8.0 kgf/cm². They are widely used in pneumatic control systems, automation equipment, and other applications.

3V Series Solenoid Valves
The 3V series consists of 3-port, 2-position (2/3-position) pneumatic solenoid valves with electrically controlled switching for directional control of air circuits in automated equipment. The catalog model code includes the specification code 3V, electrical control type (1/2/3/4 correspond to the 100/200/300/400 series, respectively), initial state (10: two-position, single-solenoid control), standard voltage, electrical connection type, and thread code. The valves are commonly available in normally closed and normally open configurations, with small port sizes such as 06 (approximately PT1/8). They accommodate standard-voltage coils and direct-lead or DIN socket connections. The valve body connects directly to the piping and is widely used with cylinders and fixtures, as well as in packaging and electronics assembly. Note that the OCR text on this page contains extensive duplication, inflated content, and misaligned columns. The meanings and available options for some code segments should be verified against the product nameplate and the manufacturer's official selection catalog.

3V Series 3-Port, 2-Position Solenoid Valves
The 3V series consists of direct-acting, normally closed 3-port, 2-position solenoid valves for air and other working media filtered through a filter rated at 40μm or above. No lubrication is required. The compact aluminum alloy valve bodies can be grouped together to save installation space, and a manual override facilitates installation and commissioning. Standard port sizes are M5 and PT1/8, with an operating pressure range of 0-0.8MPa, a proof pressure of 1.5MPa, and an orifice diameter below 0.5mm. Standard voltage options include AC220V, AC110V, AC24V, DC24V, and DC12V. The valves have an IP65 protection rating and Class B heat resistance, with DIN connector or lead-wire electrical connections. Response time is under 0.05 seconds, and the maximum operating frequency is 10 cycles/second.

3V Series 3-Port, 2-Position Solenoid Valve
The 3V series 3-port, 2-position solenoid valve is available in model 3V308. It is direct-acting, with a PT1/4 port size, an effective area of 11mm² (Cv=0.62), and an operating pressure range of 0~0.8MPa. The working medium is air filtered through a 40μm or finer filter, and oil mist lubrication is not required. The valve controls airflow and direction in pneumatic systems. Its compact design, fast response, and ability to directly drive small cylinders make it suitable for 3-port, 2-position switching in automated equipment, packaging machinery, and assembly lines.

3V Series Solenoid Valves
The 3V series consists of 3-port, 2-position pneumatic solenoid valves with aluminum alloy bodies, suitable for compressed air filtered through a 40μm or larger mesh. Operating pressure is 0.15-0.8MPa, proof pressure is 1.2MPa, operating temperature is -20~70℃, and effective area is 14.0mm² (Cv=0.78). Internal or external pilot operation is available. Port sizes are PT1/8 and PT1/4, with optional G and NPT threads. Standard voltage is AC220V, with operating voltage ranges of AC±15% and DC±10%. The series includes 3V110/3V120 DIN connector models and 3V210-06, 3V220-06, 3V210-08, and 3V220-08 models for directional control of air circuits in automated equipment.

3V Series Solenoid Valves
3V series solenoid valves are commonly used directional control valves in industrial pneumatic control systems, typically featuring a 2-position, 3-way or 2-position, 5-way configuration. A sample product code is 3V 1 10 06 A, which includes parameters such as the series, position, port size, and voltage. These valves are suitable for controlling pneumatic circuits in automation equipment.

3V100-300 Series Solenoid Valve Manifold
The 3V100-300 series solenoid valve manifold is designed for mounting 3V100, 3V200, and 3V300 series directional control valves. Multiple solenoid valves can be installed on one manifold to share air supply, exhaust, and wiring. The compact design saves space and cost, allows flexible configurations and the addition or removal of valve stations, and simplifies troubleshooting. Manifold sizes include 100M, 200M, and 300M. The operating medium is air filtered through a 40μm or finer filter, and the operating temperature is -20~70℃. The manifold assembly includes the manifold, gaskets, and screws; the blanking plate assembly includes a blanking plate and screws. Port threads are PT1/4 for 100M/200M and PT3/8 for 300M.

3V100 Series 3-Port, 2-Position Solenoid Valves
The 3V100 series consists of 3-port, 2-position pneumatic solenoid valves, available in two basic configurations: the 3V110 two-position single-solenoid valve and the 3V120 two-position double-solenoid valve. Port sizes are M5 and PT1/8 (06). The valves are suitable for air filtered through a 40μm or finer filter and use internal or external pilot operation. They have a working pressure of 0.15~0.6MPa, a proof pressure of 1.2MPa, an operating temperature of -20~70℃, and an aluminum alloy body. Standard voltages are AC220V, AC110V, AC24V, DC24V, and DC12V. They are rated IP65 and available with DIN socket or lead-wire electrical connections. Response time is less than 0.05 seconds, and the maximum operating frequency is 5 cycles/second. G and NPT port threads are available.

3V100 Series Solenoid Valves
The 3V100 series consists of 3-port, 2-position (3/2-way) solenoid directional control valves using 080-size coils (coil inner diameter Φ8.0mm). The same coils and terminal accessories can also be used with the 4V100 and 4M100 series. Coils are available in two types: CD DIN connector type (terminal type) and CL lead-wire type. Two coil inner diameter options are available: A080 (Φ8.0mm) and A090 (Φ9.0mm). Five standard voltages are offered: A AC220V, B DC24V, C AC110V, E AC24V and F DC12V. Terminal model PL1515T-P1 is suitable for both AC and DC CDA080 coils, PL1515T-P2 for AC coils, and PL1515T-P3 for DC coils. Terminals for DC coils have a built-in polarity indicator. Connect “1” to positive and “2” to negative; if the connections are reversed, the indicator will not light, but the valve will still operate. The working medium is air filtered through a 40μm or finer filter, and the operating temperature range is -20~70℃.

3V300 Series 3-Port, 2-Position Solenoid Valves
The 3V300 series comprises 3-port, 2-position pilot-operated solenoid valves with a spool design that provides reliable sealing and fast response. Double-solenoid models have a memory function. The specially machined bore reduces friction and operating pressure, extends service life, and requires no oil lubrication. A manual override simplifies installation and commissioning. Internal and external pilot options are supported, with standard voltages including AC 220V. Port sizes are PT1/4 (08) and PT3/8 (10), with a working pressure of 0.15~0.8 MPa and a proof pressure of 1.2 MPa. The valves can be mounted on a manifold to save installation space.

3V310/3V320 Series Solenoid Valves
The 3V310/3V320 series solenoid valves control the on/off state and direction of airflow in pneumatic systems. The series includes basic models such as the 3V310 and 3V320, with a choice of DIN connector or lead wire electrical connections to suit different control cabinets and field wiring arrangements. The compact valve assembly includes a fixed magnetic plate, manual pin, springs, shaped O-rings, pilot body, spool, O-rings, valve body, sealing gasket, bottom cover, round-head screws and vibration-resistant ring. It can be disassembled for seal replacement during maintenance. The catalog page provides dimensional drawings in millimeters for checking installation space. Flow rate, operating pressure, voltage, response time and other specifications should be confirmed using the complete selection table.

400M Series Manifold Base
The 400M Series Manifold Base is designed for 400 Series pneumatic valves. Its ordering code is 400M-□F, where □ indicates the number of connection positions (stations) and F denotes an unrestricted connection arrangement. The base has defined overall dimensions and is compatible with 4M manifold valve plates in various standard voltages. A common mounting accessory in pneumatic systems, it is suitable for integrating air circuits in automation equipment.

4A Series
The 4A series of graphic symbols includes hundreds of models, ranging from 4A10 to 4A910. Each model number begins with 4A, followed by three digits indicating the size series; the two digits after the hyphen indicate the interface or function code. The series is available in a range of specifications, such as 4A10-06, 4A10-08, 4A10-10, and 4A10-15. It covers sizes from 10 mm to 910 mm, with interface codes including 06, 08, 10, and 15, and is used to represent and apply graphic symbols in industrial automation systems.