Pneumatic Fittings · Speed Control Valves

HVSS Series, Threaded Connection Type
Threaded connection type.

CPC Series Threaded Straight Connector

CBL Series Quick-Connect L-Shaped Threaded Elbow

CPHT(2) Series Tandem Right Angle (2)

CPLM Series Bulkhead Elbow
CP Series Pipe Plug
Pipe Plug

ISC04-M5 Series Miniature Throttle Valve

BPU Series All-Brass Straight Connector

CSC Series Standard Throttle Valve

CPD Series Threaded Side Tee

HVFF Series Pipe Connection Type
Pipe Connection Type

CPOC Series Round-Thread Straight Connector
Round-Thread Straight Connector

CPK Series Plastic Five-Way Fitting

CPH Series Hex Nipple

SSB-G Series Threaded Equal Tee

BE Series All-Copper Equal Tee

CBE Series Quick-Control Equal Tee

CPX Series Y-Shaped Threaded Tee

CPCC Series Straight Thread Connector
CPCC series straight thread connectors connect pneumatic tubing to threaded ports and are suitable for tubing with outer diameters of 4 mm and 6 mm. Available thread sizes include M5, M6, R1/8, R1/4, R3/8, R1/2, and R3/4. The bore diameter ranges from 2 to 12 mm, L1 length from 3.5 to 15 mm, L2 length from 18 to 41 mm, and hex width across flats from 10 to 27 mm. Their compact design and reliable sealing make them widely used in pneumatic systems for automation equipment.

Push-in pneumatic plug
Push-in pneumatic plugs provide quick connections for pneumatic system piping and can be installed or removed without tools. The range includes two main models, CPD4 and CPD6, for tubing with outer diameters of 4 mm and 6 mm, respectively. Threaded ports are available in a variety of sizes, including M5, M6, R1/8, R1/4, R3/8 and R1/2. A wide range of lengths and outer diameters is available to suit different installation spaces and sealing requirements. Made from high-quality materials, these plugs offer high pressure resistance and reliable sealing. They are widely used in automation equipment, pneumatic tools and pneumatic piping systems.

CPXG Series Plastic Y-Type Five-Way Connector
The CPXG Series Plastic Y-Type Five-Way Connector is a plastic fitting for pneumatic piping, with five ports arranged in a Y configuration and designed for quick-connect and disconnect applications. Made of lightweight, corrosion-resistant plastic, this series is widely used in automation equipment, pneumatic systems, and other applications. A variety of specifications are available, with tube outer diameters ranging from 6 mm to 8 mm and body lengths from 11 mm to 15 mm to suit different piping requirements. Dimensions include port outer diameter, bore diameter, and overall length. See the model list for detailed dimensions.

CPXT Series Y-Type Threaded Five-Way Fitting
The CPXT series Y-type threaded five-way fitting is made of plastic and designed for pneumatic piping connections. It is available in multiple sizes, with tube diameters from 4 mm to 8 mm and threaded ports including R1/8, R1/4, R3/8, and R1/2. Its compact design makes installation easy, and it is widely used in the pneumatic systems of automation equipment.

CPGT Series Male Hexagonal Double-Ended Connector
The CPGT series male hexagonal double-ended connector joins tubing to threaded ports in pneumatic systems. Its hexagonal body makes it easy to tighten with a wrench, while the push-in connection provides a reliable seal. Model designations specify the tube outside diameter and thread size. A range of size combinations is available to suit different tubing diameters and threaded connections. Typically made of engineering plastic or metal, the connector is pressure-resistant and corrosion-resistant.

CPLF Series Female Threaded Elbow
The CPLF Series Female Threaded Elbow is a pipe fitting for pneumatic systems with female-thread connections. It is compatible with PU or nylon tubing with outside diameters of 4 mm, 6 mm, 8 mm, 10 mm, and 12 mm. Thread options include M5, M6, Rc1/8, Rc1/4, Rc3/8, and Rc1/2. Its compact design makes installation easy, and it is widely used in automation equipment and pneumatic piping systems.

Female Thread Elbow
Female-thread elbows are used to connect tubing in pneumatic systems. One end has a female-thread port, while the other is a push-in tube fitting, allowing the line to turn 90°. The products are available in three series: CPLF, CPX, and CPU, covering a range of tube outer diameters (ΦD) and thread sizes (Rc/PT). The CPLF and CPX series suit tube outer diameters of 4–12 mm and offer thread sizes including M5, M6, Rc1/8, Rc1/4, Rc3/8, and Rc1/2, with various lengths (L1, L2, L3) and body diameters (ΦD1, Φ). The CPU series features compact elbows for tube outer diameters of 4–188 mm (the last two digits of the model code indicate the outer diameter). Its compact design is suitable for space-constrained applications. All series are made from high-quality materials for pressure and wear resistance, and are widely used in automation equipment, pneumatic tools, and piping connections.

CPU Series Female-Thread Elbow
The CPU Series Female-Thread Elbow is a high-quality fitting for pneumatic piping systems. Its elbow design allows airflow direction to be changed in confined spaces. Product codes begin with CPU, and the number indicates the tube outside diameter (ΦD). Standard models include CPU04 (ΦD=4 mm), CPU06 (6 mm), CPU08 (8 mm), CPU10 (10 mm), CPU12 (12 mm), CPU14 (14 mm), and CPU16 (16 mm). The extended CPU18 series offers a range of sizes from 6 mm to 184 mm (for example, CPU18-04 corresponds to 6 mm, CPU18-06 to 8 mm, CPU18-08 to 8 mm, and CPU18-10 to 10 mm, increasing in sequence up to CPU18-184, which corresponds to 184 mm). Detailed dimensions are provided for each model, including ΦD1, ΦD2, ΦD3, and overall length L, ensuring a proper fit during installation. These fittings are widely used in automation equipment, pneumatic tools, and industrial piping systems, and offer reliable connections, easy installation, and good pressure resistance.

CPY Series Plastic Y-Shaped Tee
CPY series plastic Y-shaped tees are push-to-connect fittings for pneumatic systems. Made of lightweight, corrosion-resistant plastic, they connect air tubing with a quick push-in, pull-out action to create a branch in the line. They are suitable for compressed-air systems. The number in each model indicates the tubing outside diameter in millimeters. Sizes from 4 mm to 18 mm are available to suit different tube diameters. Detailed dimensions are listed for each model, including the tubing outside diameter, fitting outside diameter, mounting-hole diameter, and the length of each section, making product selection and installation easier. These fittings are widely used in automation equipment, pneumatic tools, and piping systems.

CPV Series Plastic Elbow
The CPV series plastic elbow is a German-style push-in pneumatic fitting designed for applications where airflow direction needs to be changed in pneumatic piping systems. Made from engineering plastic, it is corrosion-resistant, lightweight, and quick to install. The series includes eight models, from CPV04 to CPV18, for tube outer diameters ranging from 4 mm to 18 mm, meeting a variety of connection requirements. Its compact design and reliable sealing make it widely used in automation equipment, pneumatic tools, packaging machinery, and other applications.

CPM Series Bulkhead Union
The CPM Series Bulkhead Union is a push-in pneumatic fitting used to connect tubing through a bulkhead or panel. Its collet-style quick-connect design makes installation easy and provides a reliable seal. Specifications include tubing outer diameters of 4–18 mm, thread sizes from M12×1 to M26×1, and overall lengths of 30.5–48 mm. Made of engineering plastic and copper alloy, it is suitable for compressed-air piping systems.

CPLM/CPE Series Bulkhead Elbow
CPLM/CPE series bulkhead elbows are elbow fittings used to connect tubing through a panel in pneumatic piping systems. The series is available in a range of sizes, including CPLM04 to CPLM12 and CPE04 to CPE20, for tube diameters from 4 mm to 20 mm. The compact design comes in various mounting dimensions, with L1 lengths from 38 mm to 64 mm and L2 lengths from 14 mm to 33 mm. Depending on the model, the bulkhead elbows are made of plastic or metal. They are suitable for pneumatic connections in pneumatic control systems and offer easy installation and reliable sealing.

CPE Series Plastic Tube Fittings
The CPE series plastic tube fittings include various types, such as bulkhead elbows and equal tees. Made from high-quality plastic, they are designed for piping connections in pneumatic systems. The range runs from CPE04 to CPE20, covering air tubing outside diameters from 4 mm to 20 mm in nine sizes. Bulkhead elbows feature a compact design for easy panel mounting and provide reliable sealing. Equal tees are used for branch lines, adding flexibility to the system. These fittings are widely used in industrial applications, including automation equipment and pneumatic controls.

CPZ Series Plastic Four-Way Connector
The CPZ Series Plastic Four-Way Connector is a fitting for pneumatic piping systems, allowing flow to be split into or combined from four paths. Made of plastic, it is suitable for low-pressure pneumatic systems. Specific specifications are not listed on this page; please refer to the full catalog.

CPMF Series Bulkhead Female-Thread Straight Fitting
The CPMF series bulkhead female-thread straight fitting is a pneumatic connector that allows tubing to pass through a panel and connect to a female thread. Made of metal or engineering plastic, it is suitable for media such as compressed air and water. The tubing outer diameter ranges from 4 to 12 mm. Thread sizes include Rc1/8, Rc1/4, Rc3/8, and Rc1/2; the mounting thread is metric fine-pitch (such as M12×1 and M14×1). Its compact design, reliable sealing, and easy installation make it widely used in automation equipment and pneumatic piping systems.

CPHF Inline Fitting
The CPHF inline fitting connects pneumatic lines and is available for a range of tube outer diameters and thread sizes. Its compact design enables quick connection and sealing, making it suitable for automation equipment, pneumatic systems, and other applications. The model code specifies the tube outer diameter and thread size. A variety of threaded connections are available, including M5, R1/8, R1/4, R3/8, and R1/2, with tube outer diameters from 4 mm to 12 mm to suit different piping requirements.

CPHF External Hex Connector
The CPHF external hex connector is a push-in fitting for pneumatic systems, with an external hex shape for easy tightening. It is suitable for air tubing with diameters from 4 mm to 12 mm and is available with common thread sizes including M5, R1/8, R1/4, R3/8, and R1/2. Made from nickel-plated brass or engineering plastic, it offers pressure and corrosion resistance and is widely used in automation equipment and pneumatic piping connections. Key specifications include tube diameter, thread size, section lengths, and fitting outer diameter.

De Push-In Pneumatic Fittings
The De push-in pneumatic fitting series includes a range of products, such as CPP tube plugs, PPF tube caps, CPYJ push-in Y-tees, and CPGJ push-in straight unions. They are designed for connecting and plugging pipes in pneumatic systems. The push-in design makes installation easy and provides reliable sealing. Models are available for different tube diameters (4–12 mm), with reducing options, and are widely used in automation equipment and pneumatic lines.

CPP Tube Plug
CPP tube plugs are push-in pneumatic fittings used to seal pneumatic lines. Their push-in design makes them easy to install and provides a reliable seal. The range includes sizes CPP04 to CPP12, for tube outer diameters from 4 mm to 12 mm.

PPF Tube Cap
The PPF tube cap is a common component in push-in pneumatic fittings, used to seal unused tubing ports. Made from high-quality plastic or metal, it offers pressure resistance and a reliable seal. The number in the model indicates the tubing outer diameter (mm); for example, PPF-04 is suitable for 4 mm tubing. Available for tubing sizes from 4 mm to 12 mm, these caps meet a variety of pneumatic circuit requirements.

CPYJ Push-In Y Tee
The CPYJ series push-in Y tees are designed for pneumatic piping systems and use push-in connections for tubing from 4 mm to 12 mm. The range includes equal-size models (such as CPYJ04 and CPYJ06) and reducing models (such as CPYJ06-04 and CPYJ12-10), allowing flexible connections between different tube sizes. The body is typically made of engineering plastic, offering easy installation and reliable sealing. Dimensions include the outside diameters of the main tube and branch tubes; refer to the model code for specific sizes. These fittings are widely used in automation equipment, pneumatic tools, and similar applications.

CPGJ Push-In Straight Union
The CPGJ push-in straight union is a quick-connect pneumatic fitting for joining PU or nylon tubing with different outside diameters in a straight reducing configuration. Its body is made of engineering plastic and its seal is made of NBR. It operates at pressures from 0 to 1.0 MPa and temperatures from 0 to 60°C. Multiple size combinations from 4 mm to 12 mm are available. Its compact design makes installation easy.

CPKD Series Five-Way Fittings
CPKD Series five-way fittings are designed for pneumatic piping connections and are available in threaded and plastic versions. Tube diameters are 4 mm, 6 mm, 8 mm, and 10 mm. The threaded version offers M5, R1/8, R1/4, R3/8, and R1/2 ports, while the plastic version features push-to-connect fittings. Compact and easy to install, these fittings are widely used in automation equipment and pneumatic control systems.

CSC/CSS/CSU Series Throttle Valves
This series of throttle valves includes the CSC standard type, CSS free-rotating type, and CSU free-rotating type. They are designed to regulate gas or liquid flow in pneumatic systems. Available for tubing diameters of 4–12 mm, with threaded connections in various sizes, including M5, R1/8, R1/4, R3/8, and R1/2. Made from copper alloy or engineering plastic, they offer good corrosion resistance and precise flow adjustment. The CSC is a direct-acting standard type, while the CSS and CSU can rotate freely to make installation orientation easier to adjust. These valves are widely used in industrial automation, pneumatic equipment, and fluid control.

CSS Series Flow Control Valves
The CSS Series flow control valves include the CSC standard type and the CSS and CSU swivel types. They regulate airflow in pneumatic systems and support one-way flow control or exhaust flow control. Their compact design suits a wide range of pneumatic circuits. Multiple tube outside diameters (ΦD 4–12 mm) and thread sizes (M5, R1/8, R1/4, R3/8, R1/2) are available to meet different installation requirements.

CSU Series Free-Rotating Flow Control Valve
The CSU Series Free-Rotating Flow Control Valve regulates airflow in pneumatic systems. Its free-rotation feature allows installation in any direction. It accommodates tube outer diameters from 4 to 12 mm and is available with a range of threaded connections (M5, R1/8, R1/4, R3/8, R1/2) to suit different piping interfaces. Its compact, reliable design makes it suitable for automation equipment, pneumatic lines, and pneumatic control systems.

CSPC Series Connectors
This series includes three types of connectors—CSPC, CSPL, and CSPU—for pneumatic piping. CSPC is a straight connector, CSPL is an elbow connector, and CSPU is a straight push-in connector. The tube outside diameter ΦD ranges from 4 to 12 mm. Thread sizes include R1/8, R1/4, R3/8, R1/2, M5, and M6. A variety of sizes are available to meet different installation requirements.

CSPL Series Push-in Fittings
CSPL series push-in fittings provide quick connections between tubing and equipment in pneumatic systems. They are available for tube outer diameters of 4, 6, 8, 10, and 12 mm, with metric M5 and M6 ports and inch-thread ports R1/8, R1/4, R3/8, and R1/2. A range of L1 and L2 lengths is available to suit different installation spaces. Designed for compressed-air lines, they are easy to install and provide reliable sealing.

CSPU Series Connectors
The CSPU series connector is a straight-through pneumatic fitting for hoses with outer diameters of 4–12 mm. Its push-to-connect design makes installation easy. The body is made of engineering plastic, and the seal is made of nitrile rubber. It operates at pressures from 0 to 1.0 MPa and temperatures from -20°C to +80°C. Models include CSPU04, CSPU06, CSPU08, CSPU10, and CSPU12 for different tube diameters. Featuring a compact design and high reliability, these connectors are widely used in automation equipment, pneumatic systems, and other applications.

HVFF/HVFS/HVSF Push-In Fittings
This series of pneumatic fittings comes in three configurations: HVFF straight-through type, HVFS tube-to-thread type, and HVSF threaded-to-tube type. Designed for connecting piping in pneumatic systems, they are available in a range of tube diameters and thread sizes. They are easy to install and provide reliable sealing. These products are widely used in automation equipment, pneumatic tools, machinery manufacturing, and other fields.