Pneumatic Cylinders

1730 Series Stopper Cylinders
1730 series stopper cylinders position, stop and cushion pallets or workpieces on automated conveyor lines. They provide stopping, cushioning and downward reset functions. The series includes F1730 and YGZX designs, with sizes such as 25.30, 25.35, 50.50, 32-40 and 50-50. Stopping loads range from 150~2000kg, with a stopping stroke of approximately 30~50mm and a lowering stroke of approximately 26~45mm. Options include no cushioning, spring cushioning and hydraulic cushioning to suit different impact energies and cycle times. Select the size and cushioning type based on the load, conveyor speed, stopping frequency and installation space.

AMT24 Series Stopper Cylinders
AMT24 series stopper cylinders intercept and position workpieces on automated conveyor and assembly lines. The cylinder drives a stopper that swings downward or rotates, temporarily stopping and precisely positioning the workpiece at a station. The series includes QCA (non-cushioned stoppers), QCB (cushioned stoppers), QCC (rotary stoppers), and SCA/SCB backstops. Key specifications include a stopping load of 60~800 kg, cushioning option, stopping stroke of 18~35 mm, and lowering stroke of 7~10 mm. Cushioned models use springs or hydraulic damping to absorb workpiece impacts, reducing collision noise and stopper wear. Rotary models have a compact footprint and are suitable for lateral stopping in confined stations. Backstops allow movement in one direction and prevent workpieces from moving backward. These products are widely used for conveyor lane diversion, merging, positioning, accumulation, and workstation stopping.

C55 Series Ultra-Thin Cylinder

JGL Series Lever Clamp Cylinder
Slim design with a compact size and low weight. Lever-style clamping ensures reliable operation. An optional magnetic ring facilitates control and automated operation.

RSG Series Stopper Cylinders

TWQ Series Stopper Cylinders

RSH Series Heavy-Duty Stopper Cylinder

HRSQ Series Stopper Cylinder
The HRSQ series is a fixed mounting height stopper cylinder designed to stop and position workpieces on conveyor lines. Its cylinder center height remains fixed after installation, facilitating rapid production line changeovers and alignment. Bore sizes include 16, 20, 32, 40, and 50. The Φ16 and Φ20 models use M5 port threads, while Φ32 and larger models offer Rc, NPT, and G port thread options. Two mounting styles are available: B (through-hole mounting) and A (threaded-hole mounting at both ends). Versions with or without a built-in magnetic ring can be selected as needed. Models with a magnetic ring can be paired with A73 or other magnetic switches for position detection, with a choice of 1 or 2 switches. The stroke is selected according to operating conditions. The D-shaped rod end withstands workpiece impact and provides cushioned stopping.

HTWH Series Stopper Cylinder
The HTWH series stopper cylinder is a pneumatic actuator used to stop and precisely position workpieces or pallets on automated conveyor lines and at assembly stations. Series codes include HTWH, HTDH, HTTH, and HTTM. Bore sizes are 20, 25, 32, 40, 50, 63, and 80mm, with the stroke selected to suit operating conditions (30mm in the catalog example). The magnet option is available without a magnet (blank) or with a magnet (S) for position detection by a magnetic switch. The self-locking option is available without self-locking (blank) or with self-locking (F); the latter maintains the stopping position if the air supply is lost, improving safety. The thread type code specifies the mounting thread. Applications include logistics sorting, assembly line positioning, and stopping and releasing items.

MG Series Cylinders
MG series cylinders are pneumatic actuators available in bore sizes of 6, 10, 16, 20, 25, 32, 40, 50 and 63 mm. Small bore sizes (6~16 mm) use a double-acting design, with a maximum operating pressure of 0.7 MPa and a minimum of 0.12 MPa. Medium and large bore sizes (20~40 mm) are available in a single-acting design, with a maximum of 1.0 MPa and a minimum of 0.18/0.23 MPa. The operating temperature is -10~70℃, and piston speed is 50~750 mm/s. Rubber or air cushioning is available. The cylinder body and end caps are generally made of aluminum alloy, while the piston rod is made of S45C hard alloy/stainless steel. Magnetic switches are optional. Standard stroke ranges vary by bore size, up to a maximum of 500 mm. Mounting dimensions are also provided.

MSG/MTG Series Cylinders
MSG/MTG series cylinders are pneumatic actuators available in six bore sizes: 20, 25, 32, 40, 50, and 63 mm. They are offered in single-acting and double-acting versions. The working medium is air filtered through a mesh rated at 40 μm or greater. The operating pressure range is approximately 0.15~1.0 MPa, the proof pressure is 1.5 MPa, and the operating temperature range is -20~70℃. Standard strokes generally do not exceed 200 mm for smaller bores or 300 mm for larger bores; long-stroke versions are available up to 500 mm. The cylinders consist of a front cover, rear cover, piston rod, shock-absorbing sleeve, impact cushion, magnet, and lubricating alloy components. They are suitable for pushing, clamping, and positioning in automated equipment. Select a model using the bore, stroke, and mounting dimension charts.

SSA/SSAS Series Cylinders
SSA/SSAS cylinders are pneumatic actuators. This page provides their overall and mounting dimensions, along with those of the similarly constructed STA/STAS models. Eight bore sizes are available: 12, 16, 20, 25, 32, 40, 50 and 63 mm. Models are available without magnets (SSA, STA) or with magnets (SSAS, STAS). Magnetic models have switch mounting grooves in the cylinder body for installing sensors to detect stroke position. The catalog lists overall dimensions A, C, B1, D, E, F, G, K1, L and M, as well as mounting hole and air port dimensions O, P1, P3, P4, R, S, T1, T2, V, W, X and Y, separately for strokes of ≤10mm and >10mm. Air port threads increase from M5×0.8 to PT1/8 and PT1/4 as the bore size increases. Mounting hole combinations range from a φ4.2 through hole with an M5×0.8 thread to a φ6.5 through hole with an M8×1.25 thread. Larger-bore cylinders also have locating holes, supporting various mounting orientations, including horizontal and vertical installation.

STA/STAS Series Cylinders
STA/STAS series cylinders are pneumatic actuators for factory automation. The catalog page also lists the STA, STAS, SSA, and SSAS models. Available bore sizes are 12, 16, 20, 25, 32, 40, 50, and 63 mm, with magnetic and non-magnetic versions and two stroke ranges: ≤10 mm and >10 mm. The table provides overall and mounting dimensions such as A, C, B1, D, E, F, G, K1, L, M, and N2, as well as port and mounting hole parameters such as O, P1, P3, P4, R, and S, making it easy to select a cylinder by bore and stroke.

RQL/RDQL Series Foot-Mount Pneumatic Cylinders
The RQL/RDQL series consists of foot-mount pneumatic cylinders with a single-rod, double-acting design. They use air as the working medium and operate at pressures of 0.05~1.0 MPa. Common bore sizes include 20, 25, 32/40, 50/63 and 80/100 mm. The rod end has an internal thread, and the cylinders are available with or without a magnetic switch. The operating fluid temperature is approximately -10~70℃, or -10~60℃ with a magnetic switch. Foot, frame and frame-side flange (RQF/RDQF) mounting options are available. The listed mounting accessories, CQS-L020, CQS-L025, CQS-F020 and CQS-F025, accommodate strokes of 15~50 mm, making it easy to secure and adjust the cylinder's position in automated equipment.

RQF/RDQF Series Frame-Side Flange Pneumatic Cylinders
The RQF/RDQF series frame-side flange pneumatic cylinders from SNS Automation (Ningbo) Group Co., Ltd. feature a single-rod, double-acting design, with bore sizes of 20, 25, 32/40, 50/63, and 80/100 mm. They operate with air at a pressure of 0.05~1.0 MPa. The rod end has an internal thread, and versions are available without a magnetic switch (-10~70℃) or with a magnetic switch (-10~60℃). The space-saving frame-side flange mounting uses CQS-F020 mounting hardware for a 20 mm bore or CQS-F025 for a 25 mm bore, with a corresponding stroke range of 15~50 mm. These cylinders are suitable for automated pushing, pulling, and clamping in compact spaces.

CJPB Series Panel-Mount Cylinders
The CJPB series consists of panel-mount pneumatic cylinders that use air as the operating medium. They are suitable for pushing, clamping and lifting in compact spaces. Three bore sizes are available: 6, 10 and 15 mm. The operating pressure is 0.2~0.7 MPa for single-acting, spring-return models and 0.12~0.7 MPa for double-acting models. The operating temperature is -10~70℃ (no freezing), piston speed is 50~500 mm/s, stroke tolerance is approximately 1.0 mm, and port size is M5×0.8. Lubrication is generally not required. The panel-mount design allows direct attachment to a panel, and magnetic switches can be fitted for position detection.

PBD Series Cylinders
SNS PBD series cylinders are pneumatic actuators suitable for linear pushing and pulling, clamping, and positioning in automated equipment. Bore sizes include Φ6, Φ8, Φ10, Φ12, Φ16, Φ20, Φ25, and Φ32 mm. Operating types include double-acting, single-acting extension, and single-acting retraction. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.7 MPa (1.5~7.0 bar), the pressure resistance is 1.2 MPa, the operating temperature is 0~70℃, and the operating speed range is 50~800 mm/s. The dimensional table provides mounting dimensions such as E and N1 for strokes of 10~200 mm, making selection and replacement easier.

TR Series Cylinders
TR Series cylinders are double-acting pneumatic actuators available in six bore sizes: 6, 10, 16, 20, 25 and 32mm. They are suitable for linear pushing and pulling, clamping and positioning in automated equipment. The operating medium is compressed air filtered through a filter rated 40μm or greater. Operating pressure is 0.15~1.0MPa (22~145psi), proof pressure is 1.5MPa, operating temperature is -20~70℃, operating speed is 30~500mm/s, and stroke tolerance is 0.1mm. A 5~10mm stroke adjustment mechanism is also provided. Cylinder mounting dimensions are specified by bore and stroke, with dimension codes including A, AB, AC, B, BA, C, CA, D, DA, G, JB, JC, LB, P, PA and PB. Standard strokes range from 10~200mm, with models selectable by stroke length.

Pneumatic Cylinders
This series of pneumatic cylinders is designed for factory automation equipment. These pneumatic actuators use compressed air to move a piston in a linear reciprocating motion and are widely used for fixture clamping, workpiece pushing, positioning, and transfer. The standard specifications table lists six bore sizes—6, 10, 15, 20, 25, and 32 mm—covering small to medium cylinders. The cylinders use hollow barrels, with dimensions and weights provided for barrel length, diameter, wall thickness, and weight. The instructions illustrate how and where to mount the cylinders to fixtures and state that the allowable lateral load must not exceed the values in the table. When selecting a cylinder, check the allowable and maximum lateral loads against the actual stroke and lateral forces to prevent off-center loading from causing premature piston rod wear or bending. The catalog focuses on dimensional tables and installation and usage precautions; model coding rules are not provided.

TCL/TCM Series Cylinders
The TCL/TCM series comprises small-bore pneumatic cylinders with bore sizes from 6 mm to 63 mm. TCL and TCM offer two different construction and mounting configurations to suit operating requirements. The dimensional table lists mounting and overall dimensions for each bore size, including A, AB, AC, AD, B, BA, C, CA, D, G, K, L, LA, LB, LC and LD, as well as port and thread dimensions including M, MA, MB, N, P, PD and PF. The end caps and connections use fine-pitch threads such as M2.5×0.45, M3×0.5 and M4×0.7 for a compact design. Stroke options are available in ranges of ≤30 mm, 31-100 mm, 101-200 mm and >200 mm. These cylinders are suitable for automated linear pushing and pulling, lifting and clamping in confined installation spaces.

HDM Series Cylinders
HDM series cylinders are double-acting pneumatic cylinders available in five bore sizes: 12, 16, 20, 25, and 32 mm. They use air as the operating medium, with an operating pressure range of 1.5-7 kgf/cm² (50-700 kPa), an operating temperature range of 0-60°C, and a maximum operating frequency of 100 cycles/min. Lubrication is optional. These compact cylinders are suitable for linear push-pull, clamping, and positioning applications in automated equipment. Models HDM-10, HDM-16, HDM-20, HDM-25, and HDM-32 correspond to the bore sizes listed above, respectively. Select the appropriate bore size based on the required output force.

MD Series Cylinders
MD series cylinders are pneumatic actuators available in double-acting (MD, MDJ) and single-acting versions (MSD single-acting extension and MTD single-acting retraction). Bore sizes are 6, 10, 16, 20, 25, and 32 mm. The working medium is compressed air filtered through a filter rated 40μm or above. Operating pressure is 0.15–1.0 MPa (22–145 psi) for double-acting models and 0.2–1.0 MPa (28–145 psi) for single-acting models. Proof pressure is 1.5 MPa (215 psi), and operating temperature is -20–70°C. G or NPT port threads are available. Applications include automated clamping, pushing, and positioning. The original stroke table and some cushioning, speed, and port size data are incomplete due to scan damage. Confirm bore size, action type, and stroke when selecting a model.

MSD Series Cylinders
The MSD series comprises double-acting and single-acting pneumatic cylinders, divided into three types by operation: MD/MDJ (double-acting), MSD (single-acting extension), and MTD (single-acting retraction). Six bore sizes are available: 6, 10, 16, 20, 25, and 32mm. They support pushing, pulling, ejecting, and clamping in compact automation equipment. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.15~1.0MPa (22~145psi) for double-acting models and 0.2~1.0MPa (28~145psi) for single-acting models. The proof pressure is 1.5MPa (215psi), and the operating temperature is -20~70℃. G and NPT port threads are available for compatibility with domestic and international piping. Select a model based on bore, stroke, action type (double-acting or single-acting), and port thread. A cushioned design is available for applications subject to greater impact.

MDJ Series Cylinders
The MDJ series includes MD/MD/MDJ double-acting cylinders and MSD/MTD single-acting cylinders in extension and retraction types. The operating medium is air filtered through a 40μm or finer filter. Bore sizes are 6, 10, 16, 20, 25, and 32 mm. Operating pressure is 0.15-1.0 MPa for double-acting models and 0.2-1.0 MPa for single-acting models. Proof pressure is 1.5 MPa, and operating temperature is -20-70℃. G or NPT port threads are available. Dimensions include through-holes, counterbores, and stroke-dependent mounting dimensions. Select the model based on bore size, action type, stroke, and port thread type.

RMS Series Cylinders
The RMS series comprises pneumatic actuators (cylinders) manufactured by SNS Automation (Ningbo) Group. The catalog lists two subseries, RMS and RMSF. RMS cylinders are available in six bore sizes: 10, 16, 20, 25, 32, and 40 mm. RMSF cylinders are available in three bore sizes: 16, 20, and 32 mm. They support pushing, pulling, clamping, and lifting of small to medium-sized components in confined installation spaces. The catalog lists selection parameters such as action type, working medium, operating pressure range, proof pressure, and operating temperature range; the values shown in these rows should be verified against the manufacturer's complete specification sheet. Bore size is the primary selection parameter. Rod and mounting configurations, such as non-rotating rods, foot mounts, and single or double clevis mounts, are selected as needed. Mounting components such as foot mounts are selected according to bore size. These general-purpose cylinders are suitable for automation equipment, fixtures, packaging, and assembly lines.

RMSF Series Cylinders
The TWSNS RMSF series cylinders belong to the same product family as the RMS series. Their parameters are listed in series specification tables in the catalog. The RMSF series is available in bore sizes of 16, 20, and 32 mm, while the RMS series covers 10, 16, 20, 25, 32, and 40 mm; both series offer 16, 20, and 32 mm bores. The specification table has separate columns for each series and lists parameters such as operating type, working medium, operating pressure range, proof pressure, and operating temperature range. These pneumatic actuators are used in industrial automation equipment for linear pushing and pulling, clamping, lifting, and similar operations. Select the specific model based on bore size, stroke, mounting type, and accessory requirements.

RSQ Series Stopper Cylinders
The RSQ series stopper cylinders are pneumatic stopping devices with a fixed mounting height, designed to position and stop workpieces or slides on conveyor lines, indexing tables, and similar equipment. Bore sizes are 12, 16, 20, 32, 40, and 50 mm. Three operating types are available: double-acting, double-acting with built-in spring, and single-acting with spring extension. Rod end options include cylindrical, flat-sided, and roller types to suit the desired stopping contact. The roller type provides rolling contact with moving workpieces to reduce wear. The operating medium is compressed air, with a pressure range of 0.15~1.0 MPa (1.5~10.2 kgf/cm²) and an ambient and fluid temperature range of -10~70℃, with no freezing. No lubrication is required, and the cylinders can be connected directly to a standard dry air supply. The fixed mounting height allows quick interchange and replacement in equipment. Stroke tolerance is +1.4 mm.

RSA Series Stopper Cylinder
The RSA Series stopper cylinder is a pneumatic stopping device manufactured by SNS Automation (Ningbo) Group Co., Ltd. Turning the adjustment dial changes the resistance of the built-in roller shock absorber, providing adjustable cushioning and a controlled stop for moving loads. It has the same specifications and operating range as the RS1H Series and is interchangeable with cylinders of the same size, sharing the same mounting dimensions. Model designations consist of RSA followed by the bore size, such as RSA 50. Different sizes can be selected by bore. Typical applications include positioning and stopping workpieces on conveyor lines, braking rotary tables, and stopping slide tables at their end positions in automated systems that require a cushioned stop. The catalog page is in Traditional Chinese, and the model designation table was not fully readable in the original scan. For dimensions other than bore size, including stroke, cushion stroke, and port thread, refer to the manufacturer's latest catalog or technical documentation.

BDF Series Positioning Cylinder
The BDF series is a magnetic-type positioning cylinder; the same series coding also includes the standard BDU type. The model number consists of five parts: series code, bore, stroke, piston rod height, and magnet code. For example, BDF-40-30-L25-S indicates a 40mm bore, 30mm stroke, L25 piston rod height, and a magnet. A blank magnet code means no magnet, while S indicates a magnet. The series is suitable for automated fixtures, tooling, and small actuators requiring position holding or positioning. Select the piston rod height and magnet option according to the bore, stroke, and available installation space.

MPE Series Threaded Cylinder
The MPE series threaded cylinder is a pneumatic actuator designated by the series code MPE in the catalog. Models are selected by bore, stroke, and the orientation of the piping port on the rodless end cap. The example model MPE 16 X 15 - N indicates a 16 mm bore, a 15 mm stroke, and port orientation N. This series is suitable for compact pneumatic applications requiring threaded mounting or a specific piping orientation. Confirm the bore, stroke, and port orientation combination when selecting a model. This page explicitly provides only the example combination; refer to the applicable selection table for other specifications.

ZDQ Series Stopper Cylinders
ZDQ series stopper cylinders are pneumatic actuators used for station positioning and accumulation on automated conveyor lines, including belt conveyors, roller conveyors, and double-speed chain conveyors. The piston rod extends to stop a carrier pallet or workpiece, then retracts to release it after assembly, inspection, routing, or other operations are complete. Magnetic models can be fitted with external magnetic switches to provide stop and release position feedback for PLC interlock control. ZDQ is the primary model designation for the series. The model suffix 32 indicates the bore size, while the number following it indicates the effective stopping stroke (for example, ZDQ32-10 has a 32 mm bore and a 10 mm stroke). The suffix S (magnetic) indicates a built-in magnetic ring for use with a magnetic switch. The series also includes models designated ZHQ. Key selection factors include bore size, stopping stroke, permissible stopping load, cushioning, and magnetic sensing. During installation, ensure the stopping direction is aligned with the workpiece's direction of travel and provide rigid support for the cylinder body.

QX Series Stopper Cylinders
QX series stopper cylinders stop, position and release workpieces or pallets on automated conveyor lines. Their hydraulic cushioning absorbs impact smoothly under heavy stopping loads, reducing noise and damage to workpieces. The series includes QX-1, QX-2, QX-3, QX-4 and QX-4-2 models. The QX-4 corresponds to specification 4-250, with a stopping load of 250 kg, a stopping stroke of 30 mm and a lowering stroke of 27.5 mm. The QX-4-2 corresponds to specification 4-2-300, with a stopping load of 300 kg, a stopping stroke of 40 mm and a lowering stroke of 30 mm. Both feature hydraulic cushioning. Select a model based on stopping load (kg), stopping stroke (mm) and lowering stroke (mm) to match the line cycle time and workpiece weight. The cylinder mounts on the side of the conveyor line for cushioned stopping and rapid release.

YGZX Series Stopper Cylinders
YGZX series stopper cylinders, also known as stop cylinders or hydraulic-buffered stoppers, stop, position and release individual workpieces or pallets on automated conveyor, assembly and logistics sorting lines. Their hydraulic cushioning smoothly absorbs kinetic energy under high impact loads, reducing workpiece impact and operating noise. Key specifications include bore or size code (such as 32 and 50), stopping stroke (40 and 50 mm), lowering stroke (28.5~45 mm), stopping load (500 and 2000 kg), and cushioning type (spring SB, hydraulic SH). Select the stopping load and stroke based on workpiece weight and line speed. The cylinders are compact, easy to install and can be used with sensors for automated interlock control.

TWH Series Stopper Cylinders
TWH series stopper cylinders are pneumatic actuators used to stop and position workpieces at stations on automated conveyor and assembly lines. The piston rod or stop block extends to stop workpiece pallets or positioning fixtures, controlling the production cycle and holding workpieces in place. The catalog provides parameters including model, specifications, bore, stroke, operating type, weight and overall dimensions. When selecting a cylinder, determine the bore and stroke based on the combined weight of the workpiece and pallet, conveyor speed and available mounting space. Also confirm the operating type (such as single-acting or double-acting, normally closed or normally open) and mounting method. The specification table on this page contains repeated fields and missing values following scan recognition. Refer to the complete catalog or the manufacturer's technical documentation for exact bore sizes, strokes, overall dimensions and weights.

TWG Series Stopper Cylinders
TWG series stopper cylinders are pneumatic actuators used to block, position, or stop workpieces on automated conveyor and assembly lines. The series offers a range of bore sizes, strokes, and operating modes, including single-acting and double-acting options, to suit different load and cycle-time requirements. Typically mounted beside or below the line, the cylinder extends its piston rod to stop a workpiece and retracts it to let the workpiece pass. Compact, fast-responding, and impact-resistant, these cylinders are widely used on automated production lines in the automotive, electronics, logistics, and other industries.

R5Q Series Stopper Cylinders
The R5Q series consists of stopper cylinders for positioning and stopping workpieces on conveyor and assembly lines. The piston rod extends to stop and release pallets or workpieces. The catalog organizes model selection by series number + mounting type + bore + stroke + action type + rod end shape. The series is available in standard R5Q and R5Q built-in magnetic ring versions; the latter has a magnetic ring inside the cylinder and can be fitted with a magnetic switch to provide a position signal. Mounting options are B through-hole (standard) and A internal through magnetic-hole mounting. The bore is 20 mm, and the action type is designated D. The unmarked cylindrical rod end can contact the workpiece directly and allows easy replacement of the cushioning tip. The compact design and simple mounting hole arrangement make the cylinder suitable for stopping small to medium loads in confined spaces. Select the bore and cushioning type according to workpiece weight, conveyor speed, and impact energy, and determine whether magnetic switch detection is required.

RS1H Series Stopper Cylinders
RS1H series stopper cylinders are pneumatic actuators installed on conveyor lines or at assembly stations to stop and position workpieces precisely at predetermined locations. An integrated roller-type shock absorber absorbs impact and reduces noise and vibration when workpieces arrive at high speed. The related RSA series stopper cylinders use a rotating adjustment dial to vary the resistance of the built-in roller-type shock absorber, accommodating different workpiece weights and conveyor speeds. Their specifications and applications are the same as those of the RS1H series. Products are available in different bore sizes, such as 50. When selecting a model, consider workpiece weight, conveyor speed, stopping position accuracy, and mounting method to determine the required cushioning capacity and stroke.

RS2H Series Roller Lever Stopper Cylinder
The RS2H series consists of roller lever stopper cylinders with bore sizes of 50, 63, and 80 mm, designed to position and stop workpieces on conveyor lines. Air is the working medium, and operating types include double-acting and single-acting (spring-extended). The rod end has a roller lever mechanism with a built-in shock absorber and standard rubber cushioning. The maximum operating pressure is 1.0MPa, and the ambient temperature range starts at approximately -10℃ (with no freezing of air). Stroke length tolerance is +1.4/0. Lubrication is generally not required; if needed, use turbine oil No. 1 ISOVG32. The cylinders are flange-mounted, with Rc1/8 or Rc1/4 port sizes. Model numbers follow the format RS2H[bore]-[stroke][action type], such as RS2H50-30DL and RS2H80-40DM. Magnetic switches such as D-M9BL can be fitted using the built-in magnet. Select the bore size using the conveyed weight and speed together with the friction coefficient charts.