Pneumatic Accessories

100M Series Base

100M Series Base

These bases are designed for use with 100/200/300/400 series modules or valve plates. Made of aluminum alloy, they are available in a range of dimensions to suit different installation requirements. The ordering code consists of the series designation (100M/200M/300M/400M) and the F code for the number of stations (any number). The dimensional tables list the installation dimensions for each model, including A, B, C, E, F, G, H, K, M, R, S, W, X, Y, and threaded port Q. Dimension L is calculated based on the number of stations N (for example, for 100M-□F, L = (N-1) × 19 + 38). The bases support any number of stations, making them adaptable to a wide range of applications.

200M Series Base

200M Series Base

The 200M Series Base is designed for 200 Series pneumatic valves and provides mounting and connection functions. The order code is 200M-F, with any number of stations available (F). The dimensional table lists the overall dimensions: A=61mm, B=51mm, C=21mm, E=4.3mm, F=22.4mm, G=23mm, H=6mm, K=170mm, M=189mm, R=43mm, S=32mm, W=92.5mm, X=26mm, Y=35mm. The threaded port is G1/4".

300M Series Base

300M Series Base

The 300M Series Base is a mounting base for 300 Series sub-base valves, providing air-line connections and mechanical support. Made of aluminum alloy, it features a compact design and can be configured with any number of stations to suit different valve assembly requirements. Overall dimensions vary depending on the number of stations. See the dimension table for details, including key dimensions such as width A, length B, and height H. Its rated pressure is suitable for low-pressure pneumatic systems. Standardized mounting holes and port specifications make integration easy.

400M Series Manifold Base

400M Series Manifold Base

The 400M Series Manifold Base is designed for 400 Series pneumatic valves. Its ordering code is 400M-□F, where □ indicates the number of connection positions (stations) and F denotes an unrestricted connection arrangement. The base has defined overall dimensions and is compatible with 4M manifold valve plates in various standard voltages. A common mounting accessory in pneumatic systems, it is suitable for integrating air circuits in automation equipment.

4M Manifold Base Plate

4M Manifold Base Plate

The 4M manifold base plate series provides mounting bases for pneumatic valve assemblies. It covers four sizes—100, 200, 300, and 400—with different port sizes and connection specifications (G1/4", G3/8", and G1/2"). The series offers a range of standard voltage options, including DC 12 V, DC 24 V, AC 24 V, AC 36 V, AC 110 V, AC 220 V, and AC 380 V, to suit different control requirements. The bases feature a modular design that allows any number of units to be combined, offering flexible installation for gas control systems on automated production lines.

D-Z73 Series Magnetic Switch

D-Z73 Series Magnetic Switch

The D-Z73 series magnetic switch is a magnetically actuated position sensor mounted on the outside of a pneumatic cylinder barrel. It detects changes in the magnetic field of a permanent magnet on the cylinder piston and outputs an on/off signal to identify the piston’s extended or retracted position. This enables end-of-stroke confirmation, interlocking, and automated control. Listed alongside the D-A73, D-C73, D-A93, and CS1-U/F/S/G series in the same catalog, it is a common sensor accessory for pneumatic actuators. It typically uses two-wire wiring and can be connected directly in series with a PLC input or relay coil circuit. When selecting a model, check the switch type (contact or solid-state, normally open or normally closed), wiring method and lead length, supply voltage (commonly DC24V), mounting thread (such as M5), and compatible cylinder bore sizes. The example ordering code shown on the right side of the catalog is YFSY3120-M5-DC24V-G, which can be used as a reference for the order format. The switch can be clipped or screw-mounted directly into the cylinder groove, and its position can be adjusted along the stroke to detect the required position for different stroke lengths.

D-A93 Series Magnetic Switches

D-A93 Series Magnetic Switches

Magnetic switches (magnetic proximity switches) mount in cylinder grooves or on mounting brackets to detect cylinder piston position without contact and output a switching signal for travel limit and position detection. They are the most commonly used position feedback devices for pneumatic actuators. The D-A93 series consists of a reed or Hall sensing element, a lead wire with an LED operation indicator, and a mounting clip. Contact (reed) and non-contact (solid-state) types are available, with two-wire or three-wire outputs. A common rated voltage is DC24V, with an M5 mounting configuration and a choice of lead wire lengths. When selecting a switch, confirm the switch type (contact/non-contact), wiring and output logic (normally open/normally closed), rated voltage and current, operation indicator, lead wire length, and cylinder groove compatibility of the mounting clip (such as the different profiles and groove types for the CS1 series and D-A73/D-Z73/D-C73). The example code on this page is YFSY3120-M5-DC24V-G, indicating the base model, mounting interface, rated voltage, and option suffix, respectively.

YFSY Series Solenoid Valves

YFSY Series Solenoid Valves

D-M9B Series Magnetic Switch

D-M9B Series Magnetic Switch

3V1 Series Solenoid Valves

3V1 Series Solenoid Valves

3-port, 2-position solenoid valve.

D-F8B Series Magnetic Switch

D-F8B Series Magnetic Switch

2V Series Solenoid Valves

2V Series Solenoid Valves

2-port, 2-position solenoid valve.

D-C73 Series Magnetic Switches

D-C73 Series Magnetic Switches

D-C73 series magnetic switches, also known as magnetic proximity switches or cylinder position sensors, mount on the outside of a cylinder barrel and detect piston travel position by sensing the magnetic ring built into the piston. They are widely used for position detection in pneumatic actuators and in automation control circuits. These switches use non-contact magnetic sensing, eliminating mechanical wear and providing fast response. They can directly drive a PLC input or relay coil. An LED status indicator on the housing simplifies on-site setup and troubleshooting. The switches can be secured in the cylinder's T-slot using an M5 thread or a dedicated mounting clip. They fit cylinders with a range of bore sizes and are available with different wiring configurations and lead lengths to suit the application. The catalog gives YFSY-3120-M5-DC24V-G as an example ordering code, covering the brand, model code, thread size (M5), rated voltage (DC24V), and type (G). The same page also lists the D-A73, D-Z73, D-A93, and CS1-U/F/S/G magnetic switch series, which can be selected according to sensing method and wiring requirements.

CS1-F Series Magnetic Switch

CS1-F Series Magnetic Switch

The CS1-F series magnetic switch provides non-contact detection of pneumatic cylinder piston position. A magnetic field actuates a reed contact to produce a switching signal. Designed for pneumatic cylinders, it fits the mounting grooves on common cylinder types and offers easy installation, fast response and high repeatability. The catalog lists it alongside magnetic switches such as CS1-U, CS1-S, CS1-G, D-A73, D-Z73, D-C73 and D-A93, making it easy to select a model based on wiring, mounting and output requirements. Refer to the actual product or ordering specifications for cable length, contact type, operating voltage, protection rating and other parameters.

CS1-G Series Magnetic Switches

CS1-G Series Magnetic Switches

The CS1-G series magnetic switch is a sensor used to detect the position of a pneumatic cylinder piston. It is typically mounted in a groove on the cylinder barrel and outputs a switching signal by sensing the magnetic ring on the piston. Available with a range of wiring and output options, these switches are suitable for position detection and control in various cylinders. Their compact design and easy installation make them widely used in automation equipment and pneumatic control systems. They typically feature an LED status indicator for easy monitoring and can be used with a PLC or relay for automatic control.

CS1-S Series Magnetic Switch

CS1-S Series Magnetic Switch

CS1-S series magnetic switches (magnetic proximity switches) detect piston position in pneumatic cylinders. The switch fits into a groove on the outside of the cylinder barrel and outputs a switching signal when the magnetic ring on the piston passes by. It can be connected directly to a PLC input or relay for end-of-stroke detection and sequence control. The series offers multiple body shapes and cable configurations, alongside models such as CS1-U, CS1-F, CS1-G, D-A73, D-Z73, D-C73, and D-A93, to suit cylinders with different bore sizes and groove designs. A common mounting thread is M5, the rated voltage is DC24V, and wiring configurations include G. When selecting a switch, confirm the cylinder groove dimensions, cable exit direction and length, contact type (2-wire/3-wire, NPN/PNP), and operating voltage.

CS1 Series Sensor Switches

CS1 Series Sensor Switches

The CS1 series sensor switches include models CS1-F, CS1-U, CS1-S, CS1-J, CS1-M and CS1-G. The catalog also lists the D-C73. These switches detect the position of cylinders or moving parts in automated equipment and output an electrical signal. Catalog specifications include switching distance, sensor switch type, operating voltage, maximum switching current, maximum vibration capacity, internal current consumption, forced-on voltage drop, indicator light, cable length and sensing voltage. The D-C73 has a green indicator light. Most cells in the technical specifications table on this page are blank; refer to the product specification sheet or subsequent pages for actual values.

CS1-U Series Magnetic Switch

CS1-U Series Magnetic Switch

The CS1-U series magnetic switch is a pneumatic accessory mounted on the outside of a cylinder barrel to detect piston position. It contains a magnetically sensitive element whose contacts actuate and output a signal when the magnetic ring on the piston enters the sensing area. The signal can be used by control circuits such as PLCs, relays or solenoid valves to detect cylinder stroke endpoints or intermediate positions for automated control. This series is typically secured in the cylinder's mounting slot using an M5 or similar mounting thread, and DC24V is a common operating voltage. Selection should take into account the cylinder bore, mounting slot type, lead wire exit and output type. The switch's operating range and response frequency should also meet the required cycle rate.

D-A73 Series Magnetic Switch

D-A73 Series Magnetic Switch

The D-A73 series magnetic switch is a position sensor mounted in a groove on a pneumatic cylinder barrel. It detects the permanent magnetic ring on the cylinder piston to determine the piston's position and sends a position signal to a PLC or solenoid valve control circuit. The appropriate snap-in mounting style is selected according to the cylinder's outside diameter and groove specifications. The switch clips directly into the barrel groove for easy installation and adjustment without an additional bracket. It has a two-wire connection, typically operates at DC24V, and features an indicator light for easy on-site confirmation of the switching status. Alongside similar magnetic switches such as the D-Z73, D-C73, and D-A93 series, it meets requirements for different sensing sensitivities, wiring configurations, and lead lengths. Common applications include cylinder end-of-stroke detection, fixture clamping confirmation, and position feedback on automated production lines. When selecting a switch, consider cylinder groove compatibility, operating voltage, wiring configuration (two-wire/three-wire), lead length, and protection rating.

AG Series Air Guns

AG Series Air Guns

AG Series air guns are handheld pneumatic tools for blowing away dust, chips and water and performing other air cleaning tasks. They connect directly to a factory compressed air line and are commonly used in machining, assembly, electronics manufacturing and packaging lines to quickly remove residue from workpiece surfaces, equipment crevices and fixtures. The series includes three models: AG110, AG250 and AG300. Three nozzle types are available—short, medium and long—to suit the available workspace, blowing distance and required air force. Short nozzles are suitable for localized cleaning at close range, while long nozzles can reach into cavities or blow debris away from a distance. The guns are lightweight, comfortable to hold, easy to operate, provide even airflow and offer good durability. When selecting a model, consider the air supply operating pressure, air consumption, inlet thread specification and required nozzle length. This catalog page lists only the models and nozzle types; it does not specify the nozzle length, inlet thread, operating pressure or air consumption for each model. Confirm these details with the manufacturer before ordering.

DG Series Air Blow Guns

DG Series Air Blow Guns

DG series air blow guns are handheld pneumatic tools for blowing, cleaning, and cooling with compressed air. They connect to workshop compressed air lines via push-in or threaded connections and are available with short, medium, or long nozzles for different working distances and applications, including narrow gaps, deep holes, and wide-area blow-off. Models are distinguished by nozzle length: DG-10-S has a short nozzle, DG-10-M has a medium nozzle, and DG-10-L has a long nozzle. The final letters S/M/L correspond to Short/Middle/Long nozzle, respectively. The catalog lists this series alongside pneumatic line accessories such as PU tubing, nylon tubing (PA6/PA12/PA11), push-in fittings, and tube cutters, which can be combined to form a complete pneumatic circuit from the air supply to the end device. Key selection parameters include nozzle length, connection size, and working fluid (air). Choose the nozzle length according to the blow-off distance and available installation space, and match the fitting to the air supply line specifications.

Air Blow Guns

Air Blow Guns

Air blow guns use compressed air to remove dust and clean the surfaces of factory equipment, molds, and parts. They can also be used for drying and cooling. The range includes A001, A018, and CS1 models with PT1/4" air inlet connections. Nozzle options include standard, long, small, adjustable-flow, and large-bore nozzles. PM20 and quick-connect fittings are available as accessories. Models come in various lengths, including 25~350mm, for use in confined spaces or at a distance.

XDH/XCL Series Plastic Air Blow Guns

XDH/XCL Series Plastic Air Blow Guns

The XDH/XCL series air blow guns feature plastic bodies and an ergonomic design for a comfortable grip, easy operation and economical performance. The barrel has a highly corrosion-resistant protective sleeve that helps prevent metal corrosion and scratches to workpieces. The barrel itself is made of hard anodized aluminum tubing for strength and durability. The working medium is filtered compressed air, with a working temperature of -10~50℃ and a working pressure of 0~10.0 kgf/cm². The body is made of plastic. Standard models include XDH-1 and XCH-1, with options for A and L dimensions, connection, material and accessories. Custom barrel lengths are available. Suitable for compressed-air applications such as removing dust and debris from equipment and drying. Do not point the gun at anyone's eyes or operate it in high-pressure environments.

JA Series Floating Joint

JA Series Floating Joint

The JA Series Floating Joint connects a cylinder to a load and compensates for misalignment during installation. Example model code: F M10 x 125 - U, where F denotes the series, M10 the thread size, 125 the length, and U the type.

TC-01 Tube Cutter

TC-01 Tube Cutter

The TC-01 is a handheld cutter for pneumatic tubing, including PU polyurethane tubing and nylon tubing (PA6/PA12/PA11). It produces clean, burr-free cuts without easily flattening the tubing, making it convenient for quick on-site cutting. Lightweight, portable, and easy to use, it is a common tool for pneumatic tubing installation and maintenance. The catalog lists this cutter in a single model, TC-01, for use with nylon tubing in this series (4x2.5, 6x4, 8x6, 10x8, 10x7.5, 12x10, 12x9; 100M/200M per roll).