Model · D-Z73 Series Magnetic Switch

D-Z73 Series Magnetic Switch

The D-Z73 series magnetic switch is a magnetically actuated position sensor mounted on the outside of a pneumatic cylinder barrel. It detects changes in the magnetic field of a permanent magnet on the cylinder piston and outputs an on/off signal to identify the piston’s extended or retracted position. This enables end-of-stroke confirmation, interlocking, and automated control. Listed alongside the D-A73, D-C73, D-A93, and CS1-U/F/S/G series in the same catalog, it is a common sensor accessory for pneumatic actuators. It typically uses two-wire wiring and can be connected directly in series with a PLC input or relay coil circuit. When selecting a model, check the switch type (contact or solid-state, normally open or normally closed), wiring method and lead length, supply voltage (commonly DC24V), mounting thread (such as M5), and compatible cylinder bore sizes. The example ordering code shown on the right side of the catalog is YFSY3120-M5-DC24V-G, which can be used as a reference for the order format. The switch can be clipped or screw-mounted directly into the cylinder groove, and its position can be adjusted along the stroke to detect the required position for different stroke lengths.

Overview

The D-Z73 series magnetic switch is a magnetically actuated position sensor mounted on the outside of a pneumatic cylinder barrel. It detects changes in the magnetic field of a permanent magnet on the cylinder piston and outputs an on/off signal to identify the piston’s extended or retracted position. This enables end-of-stroke confirmation, interlocking, and automated control. Listed alongside the D-A73, D-C73, D-A93, and CS1-U/F/S/G series in the same catalog, it is a common sensor accessory for pneumatic actuators. It typically uses two-wire wiring and can be connected directly in series with a PLC input or relay coil circuit. When selecting a model, check the switch type (contact or solid-state, normally open or normally closed), wiring method and lead length, supply voltage (commonly DC24V), mounting thread (such as M5), and compatible cylinder bore sizes. The example ordering code shown on the right side of the catalog is YFSY3120-M5-DC24V-G, which can be used as a reference for the order format. The switch can be clipped or screw-mounted directly into the cylinder groove, and its position can be adjusted along the stroke to detect the required position for different stroke lengths.

Product category: Pneumatic components / Pneumatic accessories / Magnetic switches

Models & specifications

Models and Specifications

ModelNameSpecifications
D-Z73D-Z73 Series Magnetic Switch

Original catalogs

D-Z73 Series Magnetic Switch — Catalog page
D-Z73 Series Magnetic Switch — Catalog page