Magnetic Switches

D-Z73 Series Magnetic Switch
The D-Z73 series magnetic switch is a magnetically actuated position sensor mounted on the outside of a pneumatic cylinder barrel. It detects changes in the magnetic field of a permanent magnet on the cylinder piston and outputs an on/off signal to identify the piston’s extended or retracted position. This enables end-of-stroke confirmation, interlocking, and automated control. Listed alongside the D-A73, D-C73, D-A93, and CS1-U/F/S/G series in the same catalog, it is a common sensor accessory for pneumatic actuators. It typically uses two-wire wiring and can be connected directly in series with a PLC input or relay coil circuit. When selecting a model, check the switch type (contact or solid-state, normally open or normally closed), wiring method and lead length, supply voltage (commonly DC24V), mounting thread (such as M5), and compatible cylinder bore sizes. The example ordering code shown on the right side of the catalog is YFSY3120-M5-DC24V-G, which can be used as a reference for the order format. The switch can be clipped or screw-mounted directly into the cylinder groove, and its position can be adjusted along the stroke to detect the required position for different stroke lengths.

D-A93 Series Magnetic Switches
Magnetic switches (magnetic proximity switches) mount in cylinder grooves or on mounting brackets to detect cylinder piston position without contact and output a switching signal for travel limit and position detection. They are the most commonly used position feedback devices for pneumatic actuators. The D-A93 series consists of a reed or Hall sensing element, a lead wire with an LED operation indicator, and a mounting clip. Contact (reed) and non-contact (solid-state) types are available, with two-wire or three-wire outputs. A common rated voltage is DC24V, with an M5 mounting configuration and a choice of lead wire lengths. When selecting a switch, confirm the switch type (contact/non-contact), wiring and output logic (normally open/normally closed), rated voltage and current, operation indicator, lead wire length, and cylinder groove compatibility of the mounting clip (such as the different profiles and groove types for the CS1 series and D-A73/D-Z73/D-C73). The example code on this page is YFSY3120-M5-DC24V-G, indicating the base model, mounting interface, rated voltage, and option suffix, respectively.

YFSY Series Solenoid Valves

D-M9B Series Magnetic Switch

3V1 Series Solenoid Valves
3-port, 2-position solenoid valve.

D-F8B Series Magnetic Switch

2V Series Solenoid Valves
2-port, 2-position solenoid valve.

D-C73 Series Magnetic Switches
D-C73 series magnetic switches, also known as magnetic proximity switches or cylinder position sensors, mount on the outside of a cylinder barrel and detect piston travel position by sensing the magnetic ring built into the piston. They are widely used for position detection in pneumatic actuators and in automation control circuits. These switches use non-contact magnetic sensing, eliminating mechanical wear and providing fast response. They can directly drive a PLC input or relay coil. An LED status indicator on the housing simplifies on-site setup and troubleshooting. The switches can be secured in the cylinder's T-slot using an M5 thread or a dedicated mounting clip. They fit cylinders with a range of bore sizes and are available with different wiring configurations and lead lengths to suit the application. The catalog gives YFSY-3120-M5-DC24V-G as an example ordering code, covering the brand, model code, thread size (M5), rated voltage (DC24V), and type (G). The same page also lists the D-A73, D-Z73, D-A93, and CS1-U/F/S/G magnetic switch series, which can be selected according to sensing method and wiring requirements.

CS1-F Series Magnetic Switch
The CS1-F series magnetic switch provides non-contact detection of pneumatic cylinder piston position. A magnetic field actuates a reed contact to produce a switching signal. Designed for pneumatic cylinders, it fits the mounting grooves on common cylinder types and offers easy installation, fast response and high repeatability. The catalog lists it alongside magnetic switches such as CS1-U, CS1-S, CS1-G, D-A73, D-Z73, D-C73 and D-A93, making it easy to select a model based on wiring, mounting and output requirements. Refer to the actual product or ordering specifications for cable length, contact type, operating voltage, protection rating and other parameters.

CS1-G Series Magnetic Switches
The CS1-G series magnetic switch is a sensor used to detect the position of a pneumatic cylinder piston. It is typically mounted in a groove on the cylinder barrel and outputs a switching signal by sensing the magnetic ring on the piston. Available with a range of wiring and output options, these switches are suitable for position detection and control in various cylinders. Their compact design and easy installation make them widely used in automation equipment and pneumatic control systems. They typically feature an LED status indicator for easy monitoring and can be used with a PLC or relay for automatic control.

CS1-S Series Magnetic Switch
CS1-S series magnetic switches (magnetic proximity switches) detect piston position in pneumatic cylinders. The switch fits into a groove on the outside of the cylinder barrel and outputs a switching signal when the magnetic ring on the piston passes by. It can be connected directly to a PLC input or relay for end-of-stroke detection and sequence control. The series offers multiple body shapes and cable configurations, alongside models such as CS1-U, CS1-F, CS1-G, D-A73, D-Z73, D-C73, and D-A93, to suit cylinders with different bore sizes and groove designs. A common mounting thread is M5, the rated voltage is DC24V, and wiring configurations include G. When selecting a switch, confirm the cylinder groove dimensions, cable exit direction and length, contact type (2-wire/3-wire, NPN/PNP), and operating voltage.

CS1 Series Sensor Switches
The CS1 series sensor switches include models CS1-F, CS1-U, CS1-S, CS1-J, CS1-M and CS1-G. The catalog also lists the D-C73. These switches detect the position of cylinders or moving parts in automated equipment and output an electrical signal. Catalog specifications include switching distance, sensor switch type, operating voltage, maximum switching current, maximum vibration capacity, internal current consumption, forced-on voltage drop, indicator light, cable length and sensing voltage. The D-C73 has a green indicator light. Most cells in the technical specifications table on this page are blank; refer to the product specification sheet or subsequent pages for actual values.

CS1-U Series Magnetic Switch
The CS1-U series magnetic switch is a pneumatic accessory mounted on the outside of a cylinder barrel to detect piston position. It contains a magnetically sensitive element whose contacts actuate and output a signal when the magnetic ring on the piston enters the sensing area. The signal can be used by control circuits such as PLCs, relays or solenoid valves to detect cylinder stroke endpoints or intermediate positions for automated control. This series is typically secured in the cylinder's mounting slot using an M5 or similar mounting thread, and DC24V is a common operating voltage. Selection should take into account the cylinder bore, mounting slot type, lead wire exit and output type. The switch's operating range and response frequency should also meet the required cycle rate.

D-A73 Series Magnetic Switch
The D-A73 series magnetic switch is a position sensor mounted in a groove on a pneumatic cylinder barrel. It detects the permanent magnetic ring on the cylinder piston to determine the piston's position and sends a position signal to a PLC or solenoid valve control circuit. The appropriate snap-in mounting style is selected according to the cylinder's outside diameter and groove specifications. The switch clips directly into the barrel groove for easy installation and adjustment without an additional bracket. It has a two-wire connection, typically operates at DC24V, and features an indicator light for easy on-site confirmation of the switching status. Alongside similar magnetic switches such as the D-Z73, D-C73, and D-A93 series, it meets requirements for different sensing sensitivities, wiring configurations, and lead lengths. Common applications include cylinder end-of-stroke detection, fixture clamping confirmation, and position feedback on automated production lines. When selecting a switch, consider cylinder groove compatibility, operating voltage, wiring configuration (two-wire/three-wire), lead length, and protection rating.