Rotary Cylinder

MGP Series Compact Guided Cylinder

MGP Series Compact Guided Cylinder

CDRB2 Series Vane-Type Rotary Actuator

CDRB2 Series Vane-Type Rotary Actuator

With magnetic switch.

MHZL2 Series Air Gripper (Parallel Opening and Closing Type)

MHZL2 Series Air Gripper (Parallel Opening and Closing Type)

Parallel opening and closing air gripper.

MGJ Series Miniature Guided Cylinder

MGJ Series Miniature Guided Cylinder

CRA1 Series Rack-and-Pinion Rotary Actuator

CRA1 Series Rack-and-Pinion Rotary Actuator

The CRA1 Series rack-and-pinion rotary actuator is a double-acting pneumatic actuator that converts linear piston motion into rotary oscillation. It is suitable for workpiece turning, valve actuation, indexing and positioning. Standard bore sizes are 30, 50, 63, 80 and 100 mm. The maximum operating pressure is 1 MPa and the minimum is 0.1 MPa. Ambient and fluid temperatures range from 0~60℃ (no freezing), output torque is approximately 1.9~74 N·m, swing time is 0.2~5 seconds/90°, and port sizes range from Rc M5×0.8~3/8. Models can be configured by mounting, operation and shaft-end codes, bore size, swing angle and magnetic switch, for example CRA1BWU50-90-A73.

CRA1B Series Rotary Actuators

CRA1B Series Rotary Actuators

The CRA1B series consists of rotary actuators. This page provides overall dimensions and dimensions for the angle-adjustable type, covering U50, U63, U80, and U100 sizes. The tables list mounting and overall dimensions, including AU, BU, CU, +DU, EU, SU, and MU thread dimensions. Some sizes are identified as angle-adjustable types; for other dimensions, refer to the basic type. This series is suitable for pneumatic applications requiring limited-angle rotation, such as automated clamping, flipping, and indexing. The □ in model numbers represents options not detailed here; confirm the complete model number when selecting a product.

CRB1 Series Large Vane-Type Rotary Actuator

CRB1 Series Large Vane-Type Rotary Actuator

The CRB1 series large vane-type rotary actuator converts compressed air pressure into oscillating rotary motion, enabling bidirectional shaft rotation and angular positioning. It is suitable for turning, indexing, and clamping large workpieces where high torque is required. Bore sizes are 25, 32, 40, 50, 63, 80, and 100 mm, with a standard swing angle of 90°. The series includes the CRB1 without a built-in magnetic ring and the CDR1 with a built-in magnetic ring, which can be used with magnetic switches to detect swing position. Mounting options include basic, axial, rod-side flange, non-rod-side flange, rod-side trunnion, non-rod-side trunnion, and clevis types. A double-shaft configuration (W) is available. The working medium is filtered compressed air, and the actuator can be operated without lubrication or with oil-mist lubrication.

CRB2 Series Vane-Type Rotary Actuator

CRB2 Series Vane-Type Rotary Actuator

The CRB2 series vane-type rotary actuator uses compressed air to drive a vane in a reciprocating rotary motion. It features a compact design, small size, high torque, and no need for an external guide rod. It is available in a range of bore sizes, with standard rotation angles typically including 90°, 180°, and 270°. Magnetic switches can be fitted for position detection. It is widely used in automated equipment for workpiece turning, clamping, sorting, and valve operation. Various mounting options are available, including basic and flange types, to suit different operating conditions.

New CRB2 Series Rotary Actuators

New CRB2 Series Rotary Actuators

The new CRB2 series rotary actuators use compressed air to generate rotary torque, providing approximately 0~180° of oscillating motion for pneumatic automation applications such as flipping fixtures, opening and closing valves, and changing material direction. The series has two basic models: CRB2B (without a built-in magnetic ring) and CDR2B (with a built-in magnetic ring). Configurations include double shaft (W), basic (B), axial (L), rod-side flange (F), non-rod-side flange (G), rod-side trunnion (U), non-rod-side trunnion (T), and clevis (D). Bore sizes range from Φ20~Φ100, with a standard rotation angle of 180°. A protective cover and magnetic switch (Z) are available for position detection and integration with automated control systems.

CRBU2 Series Vane-Type Rotary Actuator

CRBU2 Series Vane-Type Rotary Actuator

The CRBU2 series is a vane-type rotary actuator that converts air pressure into rotary motion via an internal vane, producing oscillation through a set angle. A magnetic switch can be fitted for position detection. The bore size is Φ10, and the oscillation angle includes 180°. Shaft options include single-shaft and magnetic-switch-equipped types. It features a single vane. Suitable for rotary actuation, clamping, and other applications in automation equipment. Its compact design makes installation easy.

CRBU2W Series Vane-Type Rotary Actuators

CRBU2W Series Vane-Type Rotary Actuators

CRBU2W series vane-type rotary actuators use compressed air to drive a vane back and forth through a limited angle, enabling workpiece flipping, indexing, clamping and turning. They are available in single-vane (S) and double-vane (D) versions, with bore sizes of 10, 15, 20, 30 and 40 mm and standard rotation angles of 90°, 180° and 270°. The working medium is air (unlubricated), allowing long-term operation without lubrication. The model designation CRBU2W+bore size identifies the body size, while the S/SE suffixes distinguish the vane type. For bore sizes 20 and 30, F can be added to indicate a quick-connect fitting suitable for nylon, soft nylon and polyurethane tubing. The catalog provides all A~X external and mounting dimensions and M3~M6 threaded ports, along with a dimension table for mounting units. The compact actuators can be used directly with mounting brackets and are suitable for rotary stations where space is limited.

HRQ Series Rotary Cylinder

HRQ Series Rotary Cylinder

The HRQ Series Rotary Cylinder features a dual-piston rack-and-pinion design and uses compressed air filtered through a filter rated at 40 μm or finer. It is available in 10 sizes: 2, 3, 7, 10, 20, 30, 50, 70, 100, and 200, to suit different torque and mounting requirements. The operating pressure range varies by size: 0.2–0.7 MPa for the smaller sizes (2 and 3), and 0.15–0.7 MPa for all other sizes. These cylinders are widely used in applications requiring rotary motion, such as automated assembly, material handling, and indexing. They feature a compact design, high output torque, and excellent rotational accuracy.

HSMZ Series Three-Position Rotary Cylinder

HSMZ Series Three-Position Rotary Cylinder

The HSMZ series is a range of three-position pneumatic rotary cylinders designed to rotate and position loads at three preset angles. Typical automation applications include workpiece flipping, indexing and fixture rotation. Cylinders of this type are generally driven by dual-piston or dual-rack mechanisms and use internal or external stops, limit screws and cushioning mechanisms to ensure reliable positioning at the intermediate and both end positions. Features include adjustable angles, high repeatability and smooth end-of-stroke cushioning. Key selection criteria include bore size, rotation angle range, intermediate positioning angle, port thread, operating pressure and mounting configuration. This page provides only the series and product names; specific bore sizes, angle ranges, ordering code rules and model lists are not provided. Consult the full catalog for detailed specifications.

HMGK Series Rotary Cylinders

HMGK Series Rotary Cylinders

The HMGK series consists of rack-and-pinion rotary cylinders. Compressed air drives the rack in a linear motion, which is converted into reciprocating rotation by the pinion and output shaft. They are suitable for automated applications such as workpiece flipping, indexing, valve operation, and fixture rotation. The series is available in medium, compact, and compact with switch configurations, with series designations HMGK-1, HMGK-2, HMGK-1R, and HMGK-2R. Three mounting styles are available: SD basic, FA top flange, and FB bottom flange, allowing direct mounting or flange attachment to different machine frames. Bore sizes include 20, 25, 32, and 63. Output shaft options are T single-ended and T2 double-ended, allowing loads to be driven from one end or synchronously from both ends. Two common rotation angles are available: 90° and 180°. Select the bore size, mounting style, shaft type, and rotation angle based on load torque, required rotation angle, and available installation space.

HSRC Series Rotary Cylinder

HSRC Series Rotary Cylinder

The HSRC series consists of pneumatic rotary cylinders that turn the output shaft clockwise or counterclockwise. They are commonly used for workpiece turning, rotary clamping, indexing, and other automated applications. The series code identifies the connection type: A has threaded holes at both ends, while B has through-holes. Bore sizes include 12, 16, 25, and 32, with selection based on stroke requirements. Rotation options are R (clockwise) and L (counterclockwise). Mounting options include no mounting accessory or a rear cover flange connection plate. When selecting a cylinder, confirm the series code, bore size, stroke, rotation direction, and mounting accessory to ensure an accurate fit with the fixture and mechanism.

MSQ Series Rack-and-Pinion Rotary Actuator

MSQ Series Rack-and-Pinion Rotary Actuator

The MSQ series rack-and-pinion rotary actuator converts the linear reciprocating motion of a piston into back-and-forth rotation of an output shaft. It is suitable for automated applications such as workpiece flipping, indexing, rotary clamping and opening and closing material stops. The double-acting actuator receives compressed air alternately from either side; the air supply side determines the direction and angle of rotation. The rotation angle can be adjusted using external limits or stops. The working medium is air, and no lubrication is required, allowing maintenance-free operation. Maximum operating pressure is 1MPa, with a typical operating range of approximately 0.2~1.0MPa (varying slightly by bore size). Standard bore sizes are φ10, φ20, φ30, φ50, φ70, φ100 and φ200 mm. Larger bores provide higher output torque; select a model based on the required torque, allowable axial and radial loads, and available installation space. The compact actuator delivers smooth torque and good positioning repeatability. It can be fitted with accessories such as magnetic switches, shock absorbers and adjustable stops, and is widely used for rotary motion on automated packaging, assembly, welding and material-handling lines.

CRQB Series Rotary Cylinder

CRQB Series Rotary Cylinder

The CRQB series rotary cylinder (swing cylinder) is a double-acting vane-type pneumatic actuator available in five bore sizes: Φ10, Φ15, Φ20, Φ30 and Φ40. Standard swing angles are 90° and 180°, with an adjustment range of ±5°. The operating medium is air. Maximum operating pressure is 0.7MPa for Φ10/Φ15 and 0.99MPa for Φ20~Φ40; minimum operating pressure is 0.15MPa and 0.1MPa, respectively. Ambient and fluid temperatures range from 0~60℃. Cushioning options include no cushioning or air cushioning (C air cushioning is available for Φ20 and above). Single-rod (S) and double-rod (W) versions are available, with an optional built-in magnetic ring and optional magnetic switches such as D-90AL, D-A72L, D-A73L and D-A76L for swing position detection. Port size is M5×0.8 for Φ10/Φ15 and 1/8 for Φ20 and above. Suitable for automated rotary applications such as workpiece turning, clamping, indexing and diverting.

MSQ Series Rack-and-Pinion Rotary Cylinder

MSQ Series Rack-and-Pinion Rotary Cylinder

The MSQ series rack-and-pinion rotary cylinder converts the linear reciprocating motion of a piston into rotary oscillation of the output shaft. It offers high output torque, smooth rotation, a compact design, and slip-free startup. Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm, selectable according to the load and required torque. Mounting and configuration options include basic, axial, rod-side flange, non-rod-side flange, rod-side trunnion, non-rod-side trunnion, and clevis types. A protective cover is also available. The cylinder can be fitted with a built-in magnetic ring for use with a magnetic switch to detect the end of rotation. The non-lubricated type uses rubber cushioning and can be operated with or without lubrication. The series is widely used for turning, clamping, indexing, and shifting workpieces, as well as opening and closing valves, dampers, and material gates. To specify a complete model, combine the series number, bore size, protective cover, configuration, and magnetic switch model in that order.

MQR Series Low-Torque Rotary Cylinder

MQR Series Low-Torque Rotary Cylinder

The MQR series low-torque rotary cylinder (described in the catalog as a low-rotational-torque rotary joint) is a compact oscillating/rotary cylinder from Haoda Pneumatic (H&N). An internal vane or rack mechanism drives the output shaft at low torque for automated applications such as workpiece turning, indexing, clamping, and oscillating light loads. The model code begins with MQR, followed by the bore size and rotation angle, with protection and magnetic switch codes appended after the angle. For example, MQR20-180SZ specifies a Φ20 bore, a 180° rotation angle, S protection, and a Z magnetic switch. An optional built-in magnetic ring allows a magnetic switch to be fitted for position detection. Basic configurations include a dual-shaft version. The catalog page provides only an example model code and basic parameters (bore size and rotation angle). Final selection must take load inertia, rotation time, and allowable kinetic energy into account. The operating medium is clean compressed air, and use without oil lubrication is recommended.

HCRB2 Series Vane-Type Rotary Actuator

HCRB2 Series Vane-Type Rotary Actuator

The HCRB2 series consists of vane-type rotary actuators that produce rotary motion through a specified angle as a vane oscillates within the cylinder body. They are suitable for automated applications such as workpiece turning, indexing, and changing clamping direction. The main model is HCRB2BW, with standard rotation angles of 90° and 180° and common bore sizes such as 20. The series is available without a magnetic switch or with a magnetic switch (D) for detecting the end of rotation. An optional U angle adjustment unit allows fine adjustment of the rotation angle. Supply ports can be positioned on the side of the body or axially for convenient piping. Lead wire options include a 0.5m direct lead, L 3m lead, C 0.5m connector type, CL 3m connector type, and CN without lead wires, accommodating different wiring distances to the electrical control cabinet. When ordering, write the complete model code in the following order: main model+magnetic switch+angle adjustment unit+bore size+rotation angle+supply port position+lead wire option.

XYFC91 Series

XYFC91 Series

XYFC91 series rotary actuators are available in several sizes (47, 47A, 47B, 63, 63A, and 63B), with different rotation angles E (120°, 135°, and 150°), load capacities from 4.2 kg to 7.3 kg, and reference weights of 0.04 kg or 0.06 kg. They are suitable for oscillating or rotary applications in automation equipment. Mounting dimensions vary by size.