Model · MSQ Series Rack-and-Pinion Rotary Actuator
MSQ Series Rack-and-Pinion Rotary Actuator
The MSQ series rack-and-pinion rotary actuator converts the linear reciprocating motion of a piston into back-and-forth rotation of an output shaft. It is suitable for automated applications such as workpiece flipping, indexing, rotary clamping and opening and closing material stops. The double-acting actuator receives compressed air alternately from either side; the air supply side determines the direction and angle of rotation. The rotation angle can be adjusted using external limits or stops. The working medium is air, and no lubrication is required, allowing maintenance-free operation. Maximum operating pressure is 1MPa, with a typical operating range of approximately 0.2~1.0MPa (varying slightly by bore size). Standard bore sizes are φ10, φ20, φ30, φ50, φ70, φ100 and φ200 mm. Larger bores provide higher output torque; select a model based on the required torque, allowable axial and radial loads, and available installation space. The compact actuator delivers smooth torque and good positioning repeatability. It can be fitted with accessories such as magnetic switches, shock absorbers and adjustable stops, and is widely used for rotary motion on automated packaging, assembly, welding and material-handling lines.
Overview
The MSQ series rack-and-pinion rotary actuator converts the linear reciprocating motion of a piston into back-and-forth rotation of an output shaft. It is suitable for automated applications such as workpiece flipping, indexing, rotary clamping and opening and closing material stops. The double-acting actuator receives compressed air alternately from either side; the air supply side determines the direction and angle of rotation. The rotation angle can be adjusted using external limits or stops. The working medium is air, and no lubrication is required, allowing maintenance-free operation. Maximum operating pressure is 1MPa, with a typical operating range of approximately 0.2~1.0MPa (varying slightly by bore size). Standard bore sizes are φ10, φ20, φ30, φ50, φ70, φ100 and φ200 mm. Larger bores provide higher output torque; select a model based on the required torque, allowable axial and radial loads, and available installation space. The compact actuator delivers smooth torque and good positioning repeatability. It can be fitted with accessories such as magnetic switches, shock absorbers and adjustable stops, and is widely used for rotary motion on automated packaging, assembly, welding and material-handling lines.
Product category: Pneumatic components/Rotary actuators






