Model · CRA1 Series Rack-and-Pinion Rotary Actuator
CRA1 Series Rack-and-Pinion Rotary Actuator
The CRA1 Series rack-and-pinion rotary actuator is a double-acting pneumatic actuator that converts linear piston motion into rotary oscillation. It is suitable for workpiece turning, valve actuation, indexing and positioning. Standard bore sizes are 30, 50, 63, 80 and 100 mm. The maximum operating pressure is 1 MPa and the minimum is 0.1 MPa. Ambient and fluid temperatures range from 0~60℃ (no freezing), output torque is approximately 1.9~74 N·m, swing time is 0.2~5 seconds/90°, and port sizes range from Rc M5×0.8~3/8. Models can be configured by mounting, operation and shaft-end codes, bore size, swing angle and magnetic switch, for example CRA1BWU50-90-A73.
Overview
The CRA1 Series rack-and-pinion rotary actuator is a double-acting pneumatic actuator that converts linear piston motion into rotary oscillation. It is suitable for workpiece turning, valve actuation, indexing and positioning. Standard bore sizes are 30, 50, 63, 80 and 100 mm. The maximum operating pressure is 1 MPa and the minimum is 0.1 MPa. Ambient and fluid temperatures range from 0~60℃ (no freezing), output torque is approximately 1.9~74 N·m, swing time is 0.2~5 seconds/90°, and port sizes range from Rc M5×0.8~3/8. Models can be configured by mounting, operation and shaft-end codes, bore size, swing angle and magnetic switch, for example CRA1BWU50-90-A73.
Product category: Pneumatic Components/Rotary Actuators
Models & specifications
| Model / Name | Bore (mm) | Magnetic switch | Swing angle (deg) |
|---|---|---|---|
| CRA1BWU50-90-A73 CRA1 Series Rack-and-Pinion Rotary Actuator CRA1BWU50-90-A73 | 50 | A73 | 90 |






