Speed Control Valves

SA Series Pipeline Valves

SA Series Pipeline Valves

TO-SQF Series Inline Flow Control Valve, Female Thread

TO-SQF Series Inline Flow Control Valve, Female Thread

TO-SLF-G Series Female Thread Flow Control Valve

TO-SLF-G Series Female Thread Flow Control Valve

ASC Series Speed Control Valves

ASC Series Speed Control Valves

ASC series speed control valves control the operating speed of cylinders and other actuators by adjusting the valve needle opening to change the airflow. The valve body is made of materials such as nickel-plated brass and zinc alloy. The plastic body and fitting body can rotate freely for easy adjustment of the tubing direction. The compatible fluid is air only (no other gases or liquids). The operating pressure range is 0.1~1.0 MPa, proof pressure is 1.5 MPa, and operating temperature is 0~60℃. The valves are suitable for PU and nylon tubing. Models cover metric tube diameters of 4, 6, 8, 10, and 12 mm and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include G1/8, G1/4, G3/8, and G1/2 (G threads), and NPT1/8, NPT1/4, NPT3/8, and NPT1/2 (N threads). By installation type, the valves are classified as exhaust throttling valves (standard installation) and inlet throttling valves (reverse installation).

ASA/ASC Series Flow Control Valves

ASA/ASC Series Flow Control Valves

ASA/ASC series flow control valves (speed control valves) regulate the operating speed of pneumatic actuators such as cylinders. Rotating the adjustment wheel changes the valve opening for stepless speed control: clockwise closes the valve and counterclockwise opens it. The valve body and fitting body can rotate relative to each other, allowing tubing to be connected in any direction. The same valve provides meter-out control when installed in the standard orientation and meter-in control when reversed. The valve body, adjustment wheel and locking wheel are made of nickel-plated copper; the seals are nitrile rubber (NBR), the N-Holder is brass, the zinc sleeve is zinc alloy, and the compression ring is polyoxymethylene (POM). The operating medium is air, with an operating pressure range of 0.1~1.0MPa(15~150psi), a proof pressure of 1.5MPa(225psi), and an operating temperature of 0~60℃(32~140℉). The valves are compatible with PU and nylon tubing. G-thread (ASC…G), NPT-thread (ASC…N), and ASA series models are available in a range of tube sizes.

AS-L Self-Locking Speed Control Valve

AS-L Self-Locking Speed Control Valve

The AS-L self-locking speed control valve regulates the speed of pneumatic actuators. Its self-locking design holds the adjustment in place once set, reducing flow changes caused by vibration or accidental operation. Common models in this series include AS1201F-M3/M5/M6, compatible with Φ3~Φ6 pneumatic tubing. The catalog provides tube outer diameter and installation and overall dimensions, including R, K, L, EA, EB, C, PA and PB, to assist with selection and layout in pneumatic piping systems.

AS Series In-Line Speed Control Valves

AS Series In-Line Speed Control Valves

AS series in-line speed control valves include AS-L self-locking, AS in-line, AS labeled in-line, and AS self-locking in-line designs. They accommodate Φ3~Φ6 mm pneumatic tubing, with model numbers indicating port thread sizes such as M3, M5, and M6 and tube diameters. Catalog tables provide overall and mounting dimensions including R, K, L, EA, EB, C, PA, PB, H, and A, K, P, E, C, J, and JC to simplify piping layout, selection, and replacement. They are suitable for flow regulation and speed control in pneumatic circuits, including applications requiring self-locking or identification.

SLW Series Universal Flow Control Valve

SLW Series Universal Flow Control Valve

The SLW series universal flow control valve (universal speed control fitting) regulates the speed of pneumatic actuators such as cylinders. Its mounting and piping arrangement can be adjusted in multiple directions. The catalog covers tube outer diameters Φ3, Φ4 and Φ6 and port threads M3 and M5, and lists overall and mounting dimensions including R, K, L, EA, EB, C, PA and PB. This makes it easier to select a valve for flow control and directional adjustment in automated equipment pneumatic circuits. Select a model that matches the tube outer diameter and port thread, such as SLW3-M3, SLW4-M5 or SLW6-M5.

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve

JSC series copper- and zinc-free push-in flow control valves (speed controllers) control the operating speed of pneumatic actuators. The push-in design allows the plastic valve body and metal fitting body to rotate relative to each other, allowing flexible tubing direction and installation. The entire series is copper- and zinc-free, making it suitable for applications sensitive to copper and zinc ions or subject to strict environmental requirements, such as electronics, semiconductors, food processing and medical equipment. The seal is EPDM, the retaining ring is aluminum, the spring is stainless steel, the release button is polyoxymethylene, and the valve body is PBT. Compatible tube outer diameters are 4, 6, 8, 10 and 12mm; thread sizes are M5, R1/8, R1/4, R3/8 and R1/2. Two control types are available: meter-out (standard configuration, default) and meter-in (reverse configuration, add B to the end of the model number). Turn clockwise to close and counterclockwise to open. Adjust safely to prevent the valve needle from suddenly ejecting, and do not force it, as this may damage the product or cause leakage.

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve

The copper- and zinc-free push-in flow control valve (speed controller) controls the operating speed of pneumatic actuators such as cylinders. Its body is made of PBT resin, with an aluminum release ring, stainless steel spring and EPDM seal. All components are free of copper and zinc, making the valve suitable for semiconductor, electronics and other applications sensitive to copper or zinc contamination. The resin body and metal fitting can rotate relative to each other, allowing flexible tubing orientation. Control types include the standard meter-out version (models such as FSC06-01 and the JSC series) and the reverse meter-in version (add B to the model number, as in FSC06-01B). Compatible tube diameters are 4/6/8/10/12mm, with M5, R1/8, R1/4, R3/8 and R1/2 connection threads. Note: A small amount of air leakage is permitted when the valve is fully closed. Do not use it where air leakage is strictly prohibited.

BKC-SL Series Stainless Steel Flow Control Valve

BKC-SL Series Stainless Steel Flow Control Valve

The BKC-SL series stainless steel pneumatic flow control valve (speed control valve) controls the operating speed of actuators. The valve body, adjustment wheel and locking wheel are made of corrosion-resistant stainless steel. The fitting body rotates freely to allow flexible tubing orientation. Suitable for air only; do not use with other gases or liquids. Operating pressure: 0~1.0 MPa; proof pressure: 1.5 MPa; operating temperature: 0~60℃. Compatible with PU and nylon tubing. The BKC-SL4-01 is a meter-out type; for a meter-in/reverse-flow type, add B to the end of the model number, as in BKC-SL4-01B.

KLA Series One-Way Flow Control Valves

KLA Series One-Way Flow Control Valves

The KLA series one-way flow control valve consists of a check valve and a throttle valve connected in parallel. It is a combined flow control valve, also known as a speed control valve. Airflow is throttled by the throttle valve in the forward direction and passes freely through the check valve in the reverse direction. The valve is commonly used to control the speed of actuators such as pneumatic cylinders. It is typically installed between the cylinder and the directional control valve and can be used for either meter-in or meter-out control. For slow, smooth cylinder movement, meter-out control is recommended to create back pressure and improve stability. The series covers nominal diameters of 3~50mm, uses compressed air as the working medium, and operates at pressures of 0.05~0.8MPa. Both medium and ambient temperatures are 5~50℃. The valves offer low leakage and a service life of 1.5 million cycles. Model numbers consist of KLA-L followed by the nominal diameter code. Some smaller diameters have a J suffix (e.g., KLA-L3-J), while larger diameters have no suffix (e.g., KLA-L20).

ASC Series One-Way Flow Control Valves

ASC Series One-Way Flow Control Valves

ASC series one-way flow control valves, also known as speed control valves or one-way speed control valves, consist of a check valve and a throttle valve connected in parallel. In the forward direction, the throttle valve restricts flow; in the reverse direction, air flows freely through the check valve. Typically installed between a cylinder and a directional control valve, they use exhaust throttling to create back pressure, smoothing actuator motion and controlling the speed of cylinders and other actuators. The working medium is compressed air filtered through a 40μm or larger filter. The operating pressure range is 0.05~0.95MPa (7~135psi), proof pressure is 1.5MPa (215psi), and operating temperature is -20~70℃. The valve body is made of aluminum alloy. Port sizes range from PT1/8~PT1/2, with standard rated flow rates of 200~1650L/min and check valve flow rates of 400~2500L/min. G or NPT port threads are available. Three body sizes are offered: ASC100/ASC200/ASC300.

RE Series Flow Control Valve

RE Series Flow Control Valve

The RE series flow control valve (speed control valve / one-way throttle valve) regulates the operating speed of actuators, such as cylinders, in pneumatic circuits by throttling airflow. The working medium is compressed air filtered through a filter rated 40μm or greater. The operating pressure range is 0-0.95MPa (0-135psi), and the operating temperature range is -5~60℃ (28-140℉). Four port sizes are available: RE-01 corresponds to PT1/8, RE-02 to PT1/4, RE-03 to PT3/8, and RE-04 to PT1/2, covering common pneumatic lines from φ4 to larger diameters. Manufactured by SNS Automation (Ningbo) Group Co., Ltd., the valve is compact and offers responsive adjustment for speed and flow control in a variety of pneumatic systems.

SC/SL Series Flow Control Valves

SC/SL Series Flow Control Valves

SC/SL series flow control valves regulate actuator speed and are designed for use with air at pressures of 0~150 PSI (approximately 0~990 kPa). Turn the needle counterclockwise to open and clockwise to close. Adjusting the needle opening changes the flow rate and thus the actuator speed. Standard body diameters include Φ4, Φ6, Φ10 and Φ12, with port threads M5, R1/8, R1/4, R3/8 and R1/2. The SC-N/SL standard NPT-thread version offers connections including UNF10-32 and NPT1/8. A small amount of air leakage is permitted, so the product is unsuitable for applications where leakage is strictly prohibited. During adjustment, open the needle slowly to prevent sudden actuator movement, and do not force or rotate the product.

SC/SL Series Flow Control Valves

SC/SL Series Flow Control Valves

SC/SL series flow control valves (speed control valves) regulate the operating speed of pneumatic actuators such as cylinders. A needle adjusts the flow passage to throttle inlet and exhaust air. The valve body combines plastic and metal; because wear occurs between the plastic body and the contact surface, the outlet can rotate freely to facilitate tubing layout. The operating medium is air only, with no other gases or liquids permitted. The operating pressure range is 0~150 PSI (0.9~9.9 kgf/cm², 0~990 kPa). The products are available in two main versions: standard R (BSP) threaded and SC-N/SL series NPT threaded. R thread sizes include M5, R1/8, R1/4, R3/8 and R1/2, with corresponding tube diameters of Φ4, Φ6, Φ10 and Φ12. NPT versions include UNF10-32 and NPT1/8, with a corresponding tube diameter of 5/32". The suffix (B) denotes an optional version as marked in the source. The valve design permits a small amount of air leakage at the fully throttled position and is not suitable where leakage is strictly prohibited. When adjusting, slowly open the needle from the fully closed position: turn counterclockwise to open and clockwise to close. Do not force or overtighten it, as this may cause damage or leakage.

AS Series Speed Control Valves with Push-in Fittings

AS Series Speed Control Valves with Push-in Fittings

AS series speed control valves with push-in fittings are one-way flow control valves for pneumatic circuits. They regulate the extension and retraction speeds of cylinders and other actuators through a throttling orifice. The integrated push-in fitting allows tubing to be inserted directly for quick installation. Thread sizes include M3x0.5, M5x0.8, M6x1.0 and 1/8", while compatible tubing outside diameters are Φ3, Φ3.2, Φ4, Φ6, Φ8, Φ10 and Φ12. Fitting styles include tube-end and flat types, with control types 0 and 1 available. Some models have a sealant coating, designated S, to ensure a tight threaded connection. These valves are widely used for speed and flow control in pneumatic systems for automated equipment, packaging machinery and assembly lines.

TWAS Series Speed Control Valve

TWAS Series Speed Control Valve

The new TWAS series speed control valve is a direct-mount valve with a plastic body and a push-in fitting. It regulates the speed of actuators such as cylinders in pneumatic circuits and is available in meter-out and meter-in configurations. The working fluid is air. The proof pressure is 1.5MPa, the maximum operating pressure is 1MPa, and the minimum operating pressure is 0.1MPa. Ambient and fluid temperatures range from -5~60℃ (no freezing). The valve is suitable for nylon, soft nylon, and polyurethane tubing. Connection threads include M3×0.5, M5×0.8, 1/8, 1/4, 3/8, and 1/2; tube sizes include 04, 06, 10, and 12; and body sizes 1, 2, 3, and 4 accommodate different flow rates and installation space requirements.

TWAS Series Inline Control Fittings

TWAS Series Inline Control Fittings

The TWAS series consists of inline control fittings (inline throttle/control fittings) for adjusting flow and pressure in pneumatic lines. The tube fitting and control valve body are integrated into a compact inline assembly that connects directly to tubing at both ends, eliminating the need for a separate mounting plate. The series is available in two sealing types: gasket-sealed (M5 thread) and sealant-sealed (R thread). The former has a compact M5 threaded connection, while the latter has a tapered pipe thread with sealant. NPT threads are also available (dimensions shown in parentheses in the diagram). Nominal sizes are expressed by the applicable tubing outside diameter d and include d2, d3.2, d4, d6, d8, d10, d12, and d16 mm. The fittings are grouped into four connection combinations, 01, 02, 03, and 04; models within each group share the same external shape but have different connection combinations at the two ends. The model suffix (S) indicates sealant, and A is the series end designation. The catalog dimensional drawings provide d, T, H, D1, D3, L1~L4, A, M, and weight, all in millimeters.

AS Series In-Line Speed Controllers

AS Series In-Line Speed Controllers

In-line speed controllers, also known as in-line flow control fittings or speed control valves, regulate the operating speed of cylinders or actuators in pneumatic circuits. They are installed directly in series within the air line. Turning the adjustment screw changes the throttle opening to provide meter-out speed control. The products are available with gasket-sealed threads (M5) or sealant-sealed threads (R), and fit tubing with outside diameters of φ4, φ6, or φ8. Nominal sizes include the 10 series (AS1001F) and 20 series (AS2001F), with variants including the panel-mount AS**1F-3 and screwdriver-adjustable AS**01F-D. Key dimensional parameters include thread size d, overall height H, outside diameters D1/D3, section lengths L1~L4, and weight. The operating medium is compressed air.

AS Series Bulkhead-Mounted Speed Control Valves

AS Series Bulkhead-Mounted Speed Control Valves

AS series bulkhead-mounted speed control valves (pneumatic flow control valves) regulate the intake or exhaust flow of pneumatic actuators for precise speed control of cylinders and other moving components. The bulkhead (panel) mounting design allows the valve to be fixed directly to a frame or panel, with tubing connected during installation. The valve body uses an in-line adjustable fitting design. Turning the adjustment screw by hand or with a screwdriver changes the throttle opening to regulate flow in one direction. Model numbers use AS as the main designation, with suffixes identifying the series (AS1001F or AS2001F) and compatible tube outer diameter (04/06/08, corresponding to φ4/φ6/φ8mm). Key dimensions include overall length L, height H, mounting thread φ1, and tubing port φ4. Gasket-seal and sealant-seal versions are available, along with thread options such as R/NPT.

AS Series Speed Control Valves

AS Series Speed Control Valves

AS series speed control valves are one-way flow control valves installed at the inlet and outlet ports of pneumatic actuators such as cylinders. They control cylinder extension and retraction speeds by adjusting the throttle opening. The series includes AS**1F piping-type control fittings that screw directly into cylinder ports, AS**1F-3 panel-mounted speed control valves, screwdriver-adjustable AS**01F-D models, and AS2201F/AS3201F/AS4201F models with Uni threads. Applicable tube outside diameters range from φ4~φ16. Thread types include M5, R1/8~R1/2, and Uni threads, with gasket-sealed and sealant-sealed versions available. The valve body has a graduated adjustment knob or a screwdriver adjustment mechanism, which maintains the set flow rate when locked. Release rings are available in gray, blue, or black for convenient piping and maintenance. Select a model according to the cylinder port thread, tube outside diameter, and mounting method. For example, AS2201F-U01-04 specifies a 1/8 thread and φ4 pneumatic tubing.

TO-SLL Series Swivel Speed Control Valves

TO-SLL Series Swivel Speed Control Valves

TO-SLL series swivel speed control valves regulate the speed of pneumatic actuators (cylinders). The valve body swivels freely to simplify tubing installation in confined spaces. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm, with connection threads of M5, R1/8, R1/4, R3/8 and R1/2. The model number consists of a main model code (TO-SLL + tube outside diameter) and a thread code (M5/01/02/03/04). The catalog table provides overall dimensions including L1, L2, L3, S and H. These valves are suitable for flow control in pneumatic circuits in automated equipment.

TO-SL-G Series One-Way Flow Control Valves

TO-SL-G Series One-Way Flow Control Valves

TO-SL-G series one-way flow control valves regulate actuator speed in pneumatic circuits. They allow free flow in one direction and restrict flow in the opposite direction. Push-in fittings provide quick connections for Φ4 and Φ6 tubing. Valve port thread sizes include G1/8, G1/4, G3/8 and G1/2. Models are distinguished by tubing outside diameter and port thread combinations. The catalog provides overall and mounting dimensions, including L1, L2, L3, H and S. These valves are suitable for cylinder speed control and flow regulation in pneumatic fixtures and automated equipment. They are standard pneumatic flow control components and can be selected according to tubing size and port thread.

TO-SQ-G Straight One-Way Flow Control Valve

TO-SQ-G Straight One-Way Flow Control Valve

The TO-SQ-G series comprises straight one-way flow control valves (in-line throttle valves) with push-in tube connections and G threads. They regulate the speed of pneumatic actuators such as cylinders. Each valve combines a check valve with an adjustable throttle, restricting flow in one direction and allowing free flow in the other. Flow is adjusted by turning the adjustment screw. The valves accommodate tube outer diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm, with G1/8, G1/4, G3/8 and G1/2 connection threads. The catalog provides overall and mounting dimensions including L1, L2, L3, H and S to facilitate piping layout.

TO-SQF-G Inline Speed Control Valve with Female Threads

TO-SQF-G Inline Speed Control Valve with Female Threads

The TO-SQF-G series consists of inline speed control valves with female threads for regulating the speed and airflow of pneumatic actuators. The valve body has female threaded connections in G1/8, G1/4, G3/8, and G1/2 sizes. An inline adjustment knob changes the throttle opening to regulate the operating speed of cylinders and other actuators. The catalog provides overall and connection dimensions including L1, L2, L3, H, T, T2, S, and H2. Models range from TO-SQF1/8-01G to TO-SQF1/2-04G. Compact and easy to adjust, these valves are suitable for pneumatic circuits in automated equipment.

KN-SL All-Steel One-Way Flow Control Valve

KN-SL All-Steel One-Way Flow Control Valve

KN-SL series all-steel one-way flow control valves, including the BXGKN-SL stainless steel version, regulate the speed of pneumatic actuators. Their one-way throttling design allows free intake flow and throttled exhaust flow. They accommodate Φ4 and Φ6 tubing, with port threads of M5, R1/8, R1/4, R3/8 and R1/2. The catalog table provides overall and mounting dimensions, including L, L1, L2, S1, S2 and H, as well as the D×d(Φ) parameter. Select a model based on tube diameter, thread size and dimensions. The all-steel valve body offers high strength, while the stainless steel version is suited to corrosive environments.

TO-SL Series One-Way Speed Control Valves

TO-SL Series One-Way Speed Control Valves

TO-SL series one-way speed control valves are pneumatic flow control components installed at cylinder ports to regulate actuator speed. They combine a push-in metal tube connection with a threaded connection. The one-way flow control design restricts incoming air to regulate speed while allowing return air to flow freely through a check valve, controlling cylinder speed in one direction. The tube connection accommodates metal or nylon tubing with outside diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16. Thread sizes include M5, R1/8, R1/4, R3/8 and R1/2, and can be screwed directly into female threaded ports on cylinders or valve bodies. For each tube diameter and thread combination, the catalog specifies overall lengths L1 and L2, hex widths across flats S1 and S2, and dimensions H and D1 to assist with product selection and piping clearance calculations. These valves are widely used for cylinder speed and flow control in automated equipment, fixtures and packaging machinery.

BXG-SL Series One-Way Flow Control Valves

BXG-SL Series One-Way Flow Control Valves

BXG-SL series one-way flow control valves are pneumatic components used to throttle and regulate compressed air flow in one direction. They combine push-in tube fittings with threaded connections and accommodate tube outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm. Thread sizes include M5, M6, R1/8, R1/4, R3/8 and R1/2. The catalog provides overall and connection dimensions, including L1, L2, H, S, T, D1 and D2, to assist with piping layout and installation selection. The series covers a range of tube diameter and thread combinations for applications such as cylinder speed control, circuit throttling and directional control. Dimensional data for some 14 mm and 16 mm models is not yet listed in the catalog.

IN503 Air Flow Control Valve

IN503 Air Flow Control Valve

IN503 series air flow control valves regulate compressed air flow in pneumatic systems. Three rated flow ranges are available: 54 (50-500L/min), 55 (100-1000L/min), and 56 (200-2000L/min), allowing selection based on actuator air consumption. The valve can be mounted with bracket A (ZS-56-A) or bracket B (ZS-56-B), each supplied with 4 M5×10L cross-recessed pan-head screws. Different cable end types are also available. The valves are suitable for air line speed adjustment and flow control in factory automation equipment.