Copper- and Zinc-Free Push-in Throttle Valves

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve
JSC series copper- and zinc-free push-in flow control valves (speed controllers) control the operating speed of pneumatic actuators. The push-in design allows the plastic valve body and metal fitting body to rotate relative to each other, allowing flexible tubing direction and installation. The entire series is copper- and zinc-free, making it suitable for applications sensitive to copper and zinc ions or subject to strict environmental requirements, such as electronics, semiconductors, food processing and medical equipment. The seal is EPDM, the retaining ring is aluminum, the spring is stainless steel, the release button is polyoxymethylene, and the valve body is PBT. Compatible tube outer diameters are 4, 6, 8, 10 and 12mm; thread sizes are M5, R1/8, R1/4, R3/8 and R1/2. Two control types are available: meter-out (standard configuration, default) and meter-in (reverse configuration, add B to the end of the model number). Turn clockwise to close and counterclockwise to open. Adjust safely to prevent the valve needle from suddenly ejecting, and do not force it, as this may damage the product or cause leakage.

JSC Series Copper- and Zinc-Free Push-in Flow Control Valve
The copper- and zinc-free push-in flow control valve (speed controller) controls the operating speed of pneumatic actuators such as cylinders. Its body is made of PBT resin, with an aluminum release ring, stainless steel spring and EPDM seal. All components are free of copper and zinc, making the valve suitable for semiconductor, electronics and other applications sensitive to copper or zinc contamination. The resin body and metal fitting can rotate relative to each other, allowing flexible tubing orientation. Control types include the standard meter-out version (models such as FSC06-01 and the JSC series) and the reverse meter-in version (add B to the model number, as in FSC06-01B). Compatible tube diameters are 4/6/8/10/12mm, with M5, R1/8, R1/4, R3/8 and R1/2 connection threads. Note: A small amount of air leakage is permitted when the valve is fully closed. Do not use it where air leakage is strictly prohibited.