Solenoid Valve

0927 Series Solenoid Valves

0927 Series Solenoid Valves

The 0927 Series is a two-position, two-way, pilot-operated (normally closed) diaphragm solenoid valve with a stainless steel body. It is suitable for water, oil, gas, and other media. Thread options include G thread (standard) or NPT thread (T). Operating voltage options are AC 220 V (A), AC 110 V (B), and DC 24 V (C). Its compact design and reliable operation make it widely used in automation controls and industrial piping systems.

2L Series Fluid Control Valve (2-Way, 2-Position)

2L Series Fluid Control Valve (2-Way, 2-Position)

The 2L series fluid control valve is a direct-acting, normally closed, 2-way, 2-position solenoid valve for on/off control of air, water, steam and other media. It has a brass body and an EPDM seal. It is suitable for liquids with a viscosity below 20CST, with an operating pressure range of 0~1.5MPa, a maximum pressure rating of 1.5MPa, an operating temperature range of -5~185℃ and a voltage tolerance of ±10%. Available flow orifice diameters include 17, 22, 30 and 50mm, with corresponding Cv values of 4.8~48 m³/h and port sizes from 1/2″ to 2″. The model designation consists of the main model (2L+flow orifice diameter code) and the port size code. For example, 2L170-15 indicates a 17mm flow orifice and a 1/2″ port. Contact the manufacturer for custom voltages and specifications.

2P Series Fluid Control Valves (2-Port, 2-Position)

2P Series Fluid Control Valves (2-Port, 2-Position)

The 2P series consists of direct-acting, normally closed, 2-port, 2-position solenoid valves that switch quickly and responsively when energized. They are compact, small, lightweight, and easy to install and remove. The orifice diameter is 2.5mm, the Cv value is 0.23, and port sizes are G1/8 (2P025-06) and G1/4 (2P025-08). Suitable media include air, water, and oil, with a fluid viscosity below 20CST. Operating pressure is 0-0.7MPa, proof pressure is 1.05MPa, and valve response time is less than 0.03 seconds. The body is made of nylon 66 and the seals are VITON. The valve uses a 2P025 solenoid coil and supports AC 50/60Hz and DC. The allowable voltage range is ±10%~±15%, power consumption is 7.0VA, insulation is Class B, and the socket diameter is Φ35. The coil is rated IP65 and is available with terminal or lead-wire connections.

2Q Series Solenoid Valves

2Q Series Solenoid Valves

The 2Q series consists of direct-acting two-way solenoid valves suitable for air, water, oil, gas and other media. The body is made of brass, and the seal is made of polytetrafluoroethylene (PTFE). The operating temperature range is -5~100℃, and the fluid viscosity must be below 50CST. The operating pressure is 0~7MPa, the maximum pressure rating is 10.5MPa, and the control pressure is 3~6MPa. The valves are available in three flow orifice sizes: 22, 35 and 50mm, with corresponding Cv values of 12, 24 and 48. Port sizes include 3/4", 1", 1-1/2" and 2", with control port sizes of 2-G1/8" or 2-G1/4". Contact the manufacturer for custom voltages and specifications.

2S Series 2/2-Way Solenoid Valves

2S Series 2/2-Way Solenoid Valves

The 2S series 2/2-way solenoid valves are available in direct-acting and stroke-limit switch versions. Key models include 2S-040-10, 2S-200-20, and 2S-200-20D. Designed for pneumatic control systems, they switch fluid flow on and off. Their compact construction and fast response make them widely used in automation equipment and industrial piping systems.

2S Series Solenoid Valves

2S Series Solenoid Valves

The 2S series consists of two-way solenoid valves with stainless steel bodies and stainless steel seals, as specified in the catalog. They are designed for on/off control of water, air, and other media in piping systems requiring corrosion resistance. The sizes listed on this page are 25-08 and 25-10 (corresponding to the common 08 and 10 port size categories). The nominal maximum working pressure column lists values including 3, 4, and 0.5MPa, indicating that the series covers pressure ratings from low-pressure air lines to medium-pressure liquid lines. Confirm the appropriate rating for the actual medium and pressure when selecting a valve. Both the body and seals are stainless steel, helping reduce corrosion of internal components and extend service life. The valves have a two-position, two-way, normally closed design: they open when energized and close when de-energized. They can be installed horizontally or vertically in the pipeline. The model column is missing from the scanned table, so refer to the product label or complete catalog for the exact model code. Multiple coil voltages, wiring methods, and connection thread sizes are also available within the series and must be specified when ordering.

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)

The 2S series comprises direct-acting, 2-port, 2-position solenoid valves with one inlet and one outlet. The solenoid coil directly actuates the valve element, allowing the valve to open at zero differential pressure without pilot pressure. These valves provide on/off control for neutral fluids such as air, water and oil. The direct-acting design ensures reliable operation even at low inlet pressures or under vacuum, with fast response, simple construction and easy maintenance. Valve bodies are typically made of brass or engineering plastic, with NBR/EPDM seals to suit different media. The series offers multiple flow orifice and connection sizes, with connection sizes from M5 to 2". The typical operating pressure range is 0~1.0MPa (up to 1.5MPa for some sizes), and the medium temperature range is approximately -5~80℃ (up to 185℃ for high-temperature versions). Common coil voltages are DC12V/DC24V/AC110V/AC220V, with an allowable voltage fluctuation of ±10%. These valves are widely used for fluid on/off control in automation equipment, water treatment, packaging machinery, medical devices and pneumatic control systems. When selecting a valve, confirm the medium, connection size, flow orifice size (Cv value), operating differential pressure and coil voltage. Contact the manufacturer for custom voltages or specifications.

2V/2P Series 2-Position, 2-Way Solenoid Valve

2V/2P Series 2-Position, 2-Way Solenoid Valve

The 2V/2P series 2-position, 2-way solenoid valve features direct-acting operation and is suitable for compressed air filtered to 40 microns. The series includes two types, 2V and 2P, with orifice sizes of 010 (1.0 mm) and 025 (2.5 mm). Port sizes are available in M5, 1/8 in. (06), and 1/4 in. (08). The operating pressure is 0–8.0 kgf/cm², and the operating temperature is -5 to 50°C. It has an IP65 protection rating and terminal-style wiring. A wide range of voltages is supported: 12/24 V DC and 24/36/110/220/380 V AC (50/60 Hz). Power consumption is low: 2.0 VA at 220 V AC and 3.0 W at 24 V DC. The maximum operating frequency is 10 cycles per second, and the insulation class is F.

2V Series 2-Way, 2-Position Solenoid Valves

2V Series 2-Way, 2-Position Solenoid Valves

The 2V series of 2-way, 2-position solenoid valves includes the 2V025, 2V130 and 2V250 subseries, all normally closed. The direct-acting 2V025 is lightweight and compact, with fast, responsive switching. It has a Φ2.5mm orifice, a CV value of 0.23, PT1/8 and PT1/4 port sizes, and an operating pressure of 0-1.0MPa. The diaphragm pilot-operated 2V130 and 2V250 offer low power consumption and high flow rates. Their respective orifice diameters are Φ13mm and Φ25mm, CV values are 6.20 and 13.00, port sizes are PT3/8 and PT1/2 for the 2V130 and PT3/4 and PT1 for the 2V250, and operating pressure is 0.05-1.0MPa. The valve bodies are nickel-plated brass. The 2V025 uses VITON fluoroelastomer seals, while the 2V130 and 2V250 use NBR seals. The valves have a class B heat resistance rating, a proof pressure of 1.5MPa and a response time of less than 0.05 seconds. Suitable media include air, water and oil. PT threads are standard, with NPT and G threads available as options. Electrical connections are available in DIN connector or lead wire configurations, with a range of standard voltages.

2V Series 2-Position, 2-Way Solenoid Valves

2V Series 2-Position, 2-Way Solenoid Valves

The 2V series consists of 2-position, 2-way, direct-acting, normally closed solenoid valves for air, water, and oil, with an operating pressure range of 0-1.0MPa (0-145psi). Three sizes are available by flow orifice diameter: 2V025 (2.5mm, Cv 0.23), 2V130 (13.0mm, Cv 6.20), and 2V250 (25.0mm, Cv 13.00), with port sizes from PT1/8 to PT1. The valves are direct-acting and normally closed, providing on/off control for a variety of fluid lines. DIN connector and lead-wire versions are available to suit different installation requirements. They are widely used in automated equipment, water, air, and oil lines, and general industrial fluid control applications.

2W/2P Series 2-Way, 2-Position Fluid Control Valves

2W/2P Series 2-Way, 2-Position Fluid Control Valves

The 2W/2P series 2-way, 2-position fluid control valves are direct-acting, normally closed solenoid valves for on/off control of air, water, oil, steam, and other media in pipelines. The 2P series (2P025-06, 2P025-08) has a nylon 66 body, VITON seals, a 2.5mm flow orifice, a Cv value of 0.23, G1/8 and G1/4 port sizes, and a response time below 0.03 seconds. Its coil has Class B insulation and IP65 protection, with direct wire leads for electrical connection. The 2W series (2W025~2W500) has a brass body and NBR or VITON oil seals, with flow orifices from 2.5~50mm, Cv values of 2.3~76, and port sizes of 1/8"~2". Its operating pressure is 0~0.7MPa, maximum proof pressure is 1.0MPa, operating temperature is -5~100℃, and voltage tolerance is ±10%. These valves switch quickly, have a compact, small design, and are easy to install and remove. They are widely used for automated fluid pipeline control.

2W Series 2/2-Way Solenoid Valve

2W Series 2/2-Way Solenoid Valve

The 2W Series direct-acting 2/2-way solenoid valve is designed for low-pressure fluid control, with air, water, oil, and gas as suitable media. The valve body is made of brass, and the seal is available in NBR, EPDM, or VITON. The operating pressure range is 0–7 kgf/cm², the maximum pressure is 10 kgf/cm², and the operating temperature range is -10 to 80°C. Various orifice sizes (2.5 mm, 4.0 mm, and 16 mm) and port sizes (1/8", 1/4", 1/2", etc.) are available. Choose a normally closed or normally open configuration, with AC 110 V or AC 220 V options.

2W Series Solenoid Valves

2W Series Solenoid Valves

2W series solenoid valves are suitable for a range of media, including air, water, oil, and gas. They are widely used in automation, water treatment, and petrochemical applications. The series is available in multiple port sizes, including 2W160-10, 2W160-15, 2W200-20, 2W250-25, 2W350-35, 2W400-40, and 2W500-50, to meet different flow requirements. The compact valve body operates reliably and enables remote on/off control.

2W Series 2-Port, 2-Position Solenoid Valve

2W Series 2-Port, 2-Position Solenoid Valve

The 2W series consists of normally closed, 2-port, 2-position solenoid valves for on/off control of fluids such as air, water, and oil. The catalog identifies the series with the specification code 2W and provides a symbol table explaining the model code positions: the first position is the specification code 2W (2-port, 2-position, normally closed), followed in order by the flow orifice diameter (Φmm), working medium, operating method, and type. These sections are written together to form the complete model number. When selecting a valve, use the flow orifice diameter to determine the nominal bore and flow capacity, then select the appropriate code positions based on the working medium (air, water, oil, etc.), operating method (direct-acting, pilot-operated, etc.), and mounting type. The OCR text on this page is severely degraded and repetitive; only the specification code 2W and flow orifice code 160 can be clearly identified. The available values for the remaining positions (working medium, operating method, and type) were not fully preserved in the source and must be supplemented from the complete catalog page before model codes can be assembled. This entry should not be used as a complete selection reference at this time.

2WH Series 2-Way Solenoid Valve (High-Pressure Direct-Acting)

2WH Series 2-Way Solenoid Valve (High-Pressure Direct-Acting)

The 2WH Series comprises high-pressure, direct-acting 2-way solenoid valves suitable for air, water, oil, gas, and other media. The operating pressure range is 0–7 bar, with a maximum pressure rating of 10 bar and an operating temperature range of -10 to 80°C. The body is made of brass, and the seal is available in NBR, EPDM, or VITON. These valves feature a direct-acting, normally closed design, offering a simple construction and fast response. They are suitable for automation applications requiring direct operation under high pressure.

3A Series Solenoid Valves

3A Series Solenoid Valves

The 3A series comprises two-position, three-way, internally piloted solenoid valves designed for compressed air filtered to 40 microns. The operating pressure range is 0.15–0.8 kgf/cm², and the operating temperature range is -5 to 50°C. The maximum switching frequency is 5 cycles per second, with a minimum energization time of 0.05 seconds. The series includes four basic sizes: 100, 200, 300, and 400. It offers single-solenoid, two-position and double-solenoid, two-position configurations, with port sizes ranging from M5 and PT1/8 to PT1/4, PT3/8, and PT1/2. The initial position is available as normally closed (NC) or normally open (NO). Effective sectional area varies by series and specification, from 5.5 mm² to 50 mm². These valves are widely used in automated pneumatic control systems.

3V/3V1/2V/2P Series Solenoid Valves

3V/3V1/2V/2P Series Solenoid Valves

3V/3V1/2V/2P series solenoid valves control airflow and switch its direction in pneumatic control circuits. The catalog lists models including 3V110-06, 3V120-06, 3V210-08, 3V220-08, 3V310-10, 3V320-10, 3V410-15, and 3V420-15, with port sizes of 1/8, 1/4, 3/8, and 1/2 for pneumatic systems with different pipe diameters. Model codes distinguish specifications and port sizes. These valves are commonly used in automated equipment, jigs and fixtures, and general-purpose pneumatic systems. This page provides only model numbers and port sizes; confirm the voltage, valve function and number of positions, and seal material using the ordering instructions.

3V Series 3/2-Way Solenoid Valves

3V Series 3/2-Way Solenoid Valves

The 3V series 3/2-way solenoid valves are available in direct-acting and pilot-operated subseries. The direct-acting 3V1 series is designed for small port sizes and drives the spool directly for fast response. The pilot-operated 3V100/200/300/400 series uses a pilot head to control the main valve and is suitable for larger port sizes. Port sizes include 1/8", 1/4", 3/8", and 1/2". Available voltage options include DC 12 V, DC 24 V, AC 24 V, AC 36 V, AC 110 V, AC 220 V, and AC 380 V. The valves have an IP65 protection rating and Class F insulation, operate at temperatures from -5 to 50°C, and have a working pressure range of 0–8.0 kgf/cm². They are widely used in pneumatic control systems, automation equipment, and other applications.

3V Series Solenoid Valves

3V Series Solenoid Valves

The 3V series consists of 3-port, 2-position (2/3-position) pneumatic solenoid valves with electrically controlled switching for directional control of air circuits in automated equipment. The catalog model code includes the specification code 3V, electrical control type (1/2/3/4 correspond to the 100/200/300/400 series, respectively), initial state (10: two-position, single-solenoid control), standard voltage, electrical connection type, and thread code. The valves are commonly available in normally closed and normally open configurations, with small port sizes such as 06 (approximately PT1/8). They accommodate standard-voltage coils and direct-lead or DIN socket connections. The valve body connects directly to the piping and is widely used with cylinders and fixtures, as well as in packaging and electronics assembly. Note that the OCR text on this page contains extensive duplication, inflated content, and misaligned columns. The meanings and available options for some code segments should be verified against the product nameplate and the manufacturer's official selection catalog.

3V Series 3-Port, 2-Position Solenoid Valves

3V Series 3-Port, 2-Position Solenoid Valves

The 3V series consists of direct-acting, normally closed 3-port, 2-position solenoid valves for air and other working media filtered through a filter rated at 40μm or above. No lubrication is required. The compact aluminum alloy valve bodies can be grouped together to save installation space, and a manual override facilitates installation and commissioning. Standard port sizes are M5 and PT1/8, with an operating pressure range of 0-0.8MPa, a proof pressure of 1.5MPa, and an orifice diameter below 0.5mm. Standard voltage options include AC220V, AC110V, AC24V, DC24V, and DC12V. The valves have an IP65 protection rating and Class B heat resistance, with DIN connector or lead-wire electrical connections. Response time is under 0.05 seconds, and the maximum operating frequency is 10 cycles/second.

3V Series 3-Port, 2-Position Solenoid Valve

3V Series 3-Port, 2-Position Solenoid Valve

The 3V series 3-port, 2-position solenoid valve is available in model 3V308. It is direct-acting, with a PT1/4 port size, an effective area of 11mm² (Cv=0.62), and an operating pressure range of 0~0.8MPa. The working medium is air filtered through a 40μm or finer filter, and oil mist lubrication is not required. The valve controls airflow and direction in pneumatic systems. Its compact design, fast response, and ability to directly drive small cylinders make it suitable for 3-port, 2-position switching in automated equipment, packaging machinery, and assembly lines.

3V Series Solenoid Valves

3V Series Solenoid Valves

The 3V series consists of 3-port, 2-position pneumatic solenoid valves with aluminum alloy bodies, suitable for compressed air filtered through a 40μm or larger mesh. Operating pressure is 0.15-0.8MPa, proof pressure is 1.2MPa, operating temperature is -20~70℃, and effective area is 14.0mm² (Cv=0.78). Internal or external pilot operation is available. Port sizes are PT1/8 and PT1/4, with optional G and NPT threads. Standard voltage is AC220V, with operating voltage ranges of AC±15% and DC±10%. The series includes 3V110/3V120 DIN connector models and 3V210-06, 3V220-06, 3V210-08, and 3V220-08 models for directional control of air circuits in automated equipment.

3V Series Solenoid Valves

3V Series Solenoid Valves

3V series solenoid valves are commonly used directional control valves in industrial pneumatic control systems, typically featuring a 2-position, 3-way or 2-position, 5-way configuration. A sample product code is 3V 1 10 06 A, which includes parameters such as the series, position, port size, and voltage. These valves are suitable for controlling pneumatic circuits in automation equipment.

3V100-300 Series Solenoid Valve Manifold

3V100-300 Series Solenoid Valve Manifold

The 3V100-300 series solenoid valve manifold is designed for mounting 3V100, 3V200, and 3V300 series directional control valves. Multiple solenoid valves can be installed on one manifold to share air supply, exhaust, and wiring. The compact design saves space and cost, allows flexible configurations and the addition or removal of valve stations, and simplifies troubleshooting. Manifold sizes include 100M, 200M, and 300M. The operating medium is air filtered through a 40μm or finer filter, and the operating temperature is -20~70℃. The manifold assembly includes the manifold, gaskets, and screws; the blanking plate assembly includes a blanking plate and screws. Port threads are PT1/4 for 100M/200M and PT3/8 for 300M.

3V100 Series 3-Port, 2-Position Solenoid Valves

3V100 Series 3-Port, 2-Position Solenoid Valves

The 3V100 series consists of 3-port, 2-position pneumatic solenoid valves, available in two basic configurations: the 3V110 two-position single-solenoid valve and the 3V120 two-position double-solenoid valve. Port sizes are M5 and PT1/8 (06). The valves are suitable for air filtered through a 40μm or finer filter and use internal or external pilot operation. They have a working pressure of 0.15~0.6MPa, a proof pressure of 1.2MPa, an operating temperature of -20~70℃, and an aluminum alloy body. Standard voltages are AC220V, AC110V, AC24V, DC24V, and DC12V. They are rated IP65 and available with DIN socket or lead-wire electrical connections. Response time is less than 0.05 seconds, and the maximum operating frequency is 5 cycles/second. G and NPT port threads are available.

3V100 Series Solenoid Valves

3V100 Series Solenoid Valves

The 3V100 series consists of 3-port, 2-position (3/2-way) solenoid directional control valves using 080-size coils (coil inner diameter Φ8.0mm). The same coils and terminal accessories can also be used with the 4V100 and 4M100 series. Coils are available in two types: CD DIN connector type (terminal type) and CL lead-wire type. Two coil inner diameter options are available: A080 (Φ8.0mm) and A090 (Φ9.0mm). Five standard voltages are offered: A AC220V, B DC24V, C AC110V, E AC24V and F DC12V. Terminal model PL1515T-P1 is suitable for both AC and DC CDA080 coils, PL1515T-P2 for AC coils, and PL1515T-P3 for DC coils. Terminals for DC coils have a built-in polarity indicator. Connect “1” to positive and “2” to negative; if the connections are reversed, the indicator will not light, but the valve will still operate. The working medium is air filtered through a 40μm or finer filter, and the operating temperature range is -20~70℃.

3V300 Series 3-Port, 2-Position Solenoid Valves

3V300 Series 3-Port, 2-Position Solenoid Valves

The 3V300 series comprises 3-port, 2-position pilot-operated solenoid valves with a spool design that provides reliable sealing and fast response. Double-solenoid models have a memory function. The specially machined bore reduces friction and operating pressure, extends service life, and requires no oil lubrication. A manual override simplifies installation and commissioning. Internal and external pilot options are supported, with standard voltages including AC 220V. Port sizes are PT1/4 (08) and PT3/8 (10), with a working pressure of 0.15~0.8 MPa and a proof pressure of 1.2 MPa. The valves can be mounted on a manifold to save installation space.

3V310/3V320 Series Solenoid Valves

3V310/3V320 Series Solenoid Valves

The 3V310/3V320 series solenoid valves control the on/off state and direction of airflow in pneumatic systems. The series includes basic models such as the 3V310 and 3V320, with a choice of DIN connector or lead wire electrical connections to suit different control cabinets and field wiring arrangements. The compact valve assembly includes a fixed magnetic plate, manual pin, springs, shaped O-rings, pilot body, spool, O-rings, valve body, sealing gasket, bottom cover, round-head screws and vibration-resistant ring. It can be disassembled for seal replacement during maintenance. The catalog page provides dimensional drawings in millimeters for checking installation space. Flow rate, operating pressure, voltage, response time and other specifications should be confirmed using the complete selection table.

4A Series Solenoid Valves

4A Series Solenoid Valves

The 4A series pneumatic solenoid valves use a segmented model code: the base model 4A110 is followed by a port size code and an option field. The catalog example is 4A110-06 (port size code 06). The code structure is 4A110-[port size]-[option], with the final □ serving as an option placeholder for additional specifications such as voltage, wiring method, or accessories. This series controls airflow direction in automated equipment and can be used with standard air preparation components, actuators, and pipe fittings. This page focuses on the model code and provides only the base model, port size code, and option field. For details such as valve function (e.g., two-position/three-position, single-solenoid/double-solenoid), operating pressure range, and flow characteristics, refer to the specification tables in the full catalog. When selecting a valve, choose the port size code according to the actual pipe diameter, then complete the option field based on the electrical and installation requirements at the site.

4M Series Manifold-Mount Solenoid Valves

4M Series Manifold-Mount Solenoid Valves

The 4M series consists of manifold-mounted solenoid valves with die-cast bodies machined on imported machining centers and imported seals fitted as standard. Standard models include 4M210-08, 4M210-08L, convertible 4M210-08, 4M220-08, 4M230-08, 4M310-08, and 4M310-10, with port sizes of 1/4 and 3/8. The A4M310-08 can be converted between 5/2-way and 3/2-way operation. In addition to general-purpose models, the series includes valves for specialized applications: 4N310-08B for tool-release cylinders, SY4V210-08 for high-frequency operation, 4V220-08-12KG and 3V210-08-12KG rated for 12 kg pressure in door pump applications, 2KA310-08 for the automotive industry, stainless steel-bodied S4M310-08 and S4V210-08, and the high-flow 2-position, 2-way Sy025-08 and 2M-3F valve assembly. A 4M series speed control plate is also available. New plug-in coils requiring no wiring are optional across the series at an additional cost of 2 yuan each.

4M Series Solenoid Valves

4M Series Solenoid Valves

The 4M series consists of 5-port, 2-position solenoid valves, with 5-port, 3-position models also available. Their internally piloted spool design provides good sealing and a responsive operation. Double-solenoid, 2-position valves have a memory function. The working medium is air filtered through a 40μm or larger filter. The operating pressure range is 0.15~0.8MPa (21~114psi), the guaranteed proof pressure is 1.2MPa (175psi), and the operating temperature is -20~70℃. The aluminum alloy body has a specially machined bore for low friction and low starting pressure, with no oil lubrication required. The maximum operating frequency is 5 cycles/second (no load). The valves are available in 100/200/300 series by nominal bore, with M5, 1/8″, 1/4″, and 3/8″ ports and effective areas of 5.5~30.0mm². Control options include 2-position single-solenoid and 2-position double-solenoid configurations. Standard voltages are AC220V, AC110V, AC24V, DC24V, and DC12V. The protection rating is IP65 (DIN40050), the heat resistance class is B, and energization time is less than 0.05 seconds. Electrical connections are available as DIN connectors or lead wires. Side plate mounting allows direct connection to the actuator

4M Series Solenoid Valves

4M Series Solenoid Valves

The 4M series 5-port, 2-position solenoid valves feature an internally piloted sliding spool design, reliable sealing, fast response, lubrication-free operation, side-plate mounting, and a manual override. Standard models include 4M110, 4M210, and 4M310, with M5, PT1/8, and PT1/4 port sizes and optional G or NPT threads. The effective flow area is 5.5~30.0 mm², Cv is 0.31~1.68, operating pressure is 0.15~0.8 MPa, proof pressure is 1.2 MPa, and operating temperature is -20~70℃. The body is made of aluminum alloy, and the maximum operating frequency is 5 cycles/second or 4 cycles/second. These valves control the direction of pneumatic actuators and can be integrated into valve manifolds.

4M100 Series Solenoid Valves

4M100 Series Solenoid Valves

The 4M100 series solenoid valve is a pneumatic directional control valve designed for a 100M base. It uses an integrated valve manifold with directional control valves from the same series and is interchangeable with 4V100 series solenoid valves, enabling centralized piping and reducing installation space. The working medium is compressed air filtered through a 40μm or higher mesh filter, and the operating temperature range is -20~70℃. The valve body is fitted with a CDA080 terminal-type (DIN connector) coil or a CL lead-wire coil. The coil has an inner diameter of Φ8.0mm (A080 specification); an A090 (Φ9.0mm) specification is also available. Five standard voltages are available: AC220V, DC24V, AC110V, AC24V and DC12V. For DC coils with a polarity indicator on the terminal, connect “1” to positive and “2” to negative. If the indicator is wired in reverse, it will not light, but the valve will still operate. Optional terminal models are PL1515T-P1, PL1515T-P2 and PL1515T-P3.

4S Series High-Flow Solenoid Valves

4S Series High-Flow Solenoid Valves

The 4S series consists of high-flow solenoid valves with die-cast bodies. Their mounting dimensions match those of the 4V series, allowing direct replacement. The valve bodies are machined on imported machining centers and fitted with imported seals as standard. Port sizes include 1/8, 1/4, 3/8 and 1/2. These valves are suitable for controlling airflow direction in automated equipment. Common models include 4S110-06, 4S120-06, 4S210-08, 4S220-08, 4S310-10, 4S320-10, 4S410-15 and 4S420-15. A new wiring-free coil is available as an option for an additional 2 yuan per unit.

4V/4M Series Solenoid Valves

4V/4M Series Solenoid Valves

The 4V/4M series 5-port, 2-position solenoid valves feature an internal pilot and sliding spool design for good sealing and responsive operation. Double-solenoid, 2-position models have a memory function. The specially machined bore reduces friction and starting pressure, extends service life, and requires no lubrication. The valves are side-plate mounted and can be connected directly to actuators. A manual override facilitates commissioning. The working medium is air filtered through a screen of approximately 40μm or greater. Operating pressure is 0.15-0.8MPa, proof pressure is 1.2MPa, and operating temperature is -20~70℃. The body is made of aluminum alloy. Port sizes M5, PT1/8, and PT1/4 are available, with optional G or NPT threads. Effective area is 5.5~30mm² (Cv=0.31~1.68), and maximum operating frequency is 5 cycles/second or 4 cycles/second.

4V Series Modular Solenoid Valves

4V Series Modular Solenoid Valves

The 4V series modular solenoid valves are directional control components for pneumatic control systems. Their modular design facilitates integrated manifold installation. The catalog lists common port sizes of 1/6, 1/4, 3/8 and 1/2, with models including 4V110-06-ZH, 4V210-08-ZH, 4V310-10-ZH, 4V410-15-ZH, 4V120-06-ZH, 4V220-08-ZH, 4V320-10-ZH and 4V420-15-ZH. Copper-free and zinc-free versions are available for automated pneumatic applications with restrictions on copper and zinc content. Select the appropriate model based on the required port size and valve function.

4V Series Solenoid Valves

4V Series Solenoid Valves

The premium white 4V series solenoid valves feature die-cast valve bodies machined on imported machining centers and come standard with imported seals. They are designed for directional control in pneumatic systems. These 2-position, 5-port solenoid valves are available with port thread sizes of 1/8, 1/4, 3/8, and 1/2. Models include 4V110-06, 4V120-06, 4V210-08, 4V220-08, 4V310-10, 4V320-10, 4V410-15, and 4V420-15. The final two digits of the model number indicate the port size: 06 corresponds to 1/8, 08 to 1/4, 10 to 3/8, and 15 to 1/2. A new wiring-free coil is available for an additional 2 yuan each. These valves are commonly used in pneumatic control circuits for automation equipment, robotic arms, and packaging machinery.

4V Series 5-Port, 2-Position/3-Position Solenoid Valves

4V Series 5-Port, 2-Position/3-Position Solenoid Valves

The 4V series 5-port, 2-position and 5-port, 3-position solenoid valves (including the 4V400 series) feature a spool design for reliable sealing and responsive operation. The specially processed bore ensures low friction, low starting pressure and a long service life without oil lubrication. Three-position valves are available with three center functions: closed center (30C), exhaust center (30E) and pressure center (30P). Dual-solenoid two-position valves have a memory function. The valve body includes a manual override for easy installation and commissioning, and the valves can be mounted on a manifold to save space. The port size is 1/2". Standard voltage options are AC220V (A), DC24V (B), AC110V (C), AC24V (E) and DC12V (F). Electrical connections are available as DIN connectors or lead wires, with P or NPT threads. The valves are internally piloted.

4V100 Series Solenoid Valves

4V100 Series Solenoid Valves

The 4V100 series 5-port, 2-position and 5-port, 3-position solenoid valves are pneumatic directional control valves that control the flow and direction of compressed air to operate cylinders and other pneumatic actuators. In this series, the 4V110 is a 5-port, 2-position valve and the 4V130 is a 5-port, 3-position valve. The model suffix C denotes a closed-center function, while -M5 indicates M5 threaded ports for compact pneumatic circuits. The compact valve assembly comprises a fixed magnetic plate, manual pin, spring, shaped O-ring, guide body, spool, O-rings, sealing gasket, bottom cover, round-head screws, vibration-resistant ring and other components. It offers fast switching, reliable sealing and a long service life. Available wiring options include DIN connectors and lead wires. These valves are widely used in directional control circuits for automation equipment, packaging machinery, electronics manufacturing and light industrial assembly.

4V100 Series Solenoid Valves

4V100 Series Solenoid Valves

The 4V100 series consists of pneumatic directional control valves (solenoid valves) used to shut off and switch the direction of airflow. The working medium must be filtered through a filter rated at 40μm or above. The operating temperature range is -20~70℃. The valves can be combined with manifolds such as the 100M to form integrated valve banks for centralized installation and piping. The matching CDA080 terminal-type DIN connector coil has an inner diameter of Φ8.0mm. A CL lead-wire coil is also available in the A090 specification (inner diameter Φ9.0mm). Standard voltages include AC220V, DC24V, AC110V, AC24V and DC12V. When wiring DC models, observe the polarity of the terminal indicator light: connect “1” to positive and “2” to negative. Optional PL1515T-P1/P2/P3 terminal assemblies are compatible with AC/DC, AC and DC coils, respectively.

4V110/4V200 Series Solenoid Valves

4V110/4V200 Series Solenoid Valves

This series of pneumatic directional control solenoid valves includes the 4V110 and 4V200 sub-series, with 5-port, 2-position and 5-port, 3-position configurations. They are commonly used to control airflow direction and cylinder operation in automated equipment. The 4V200 standard specification table lists models including 4V210-06, 4V220-06, 4V230C-06, 4V230P-06, 4V210-08, and 4V230E-08. The working medium is air filtered through a 40μm or finer filter, and the valves are internally or externally piloted. OCR errors have caused misalignment in the catalog tables, and some pressure, port size, and temperature specifications are incomplete. Refer to the full catalog for model selection.

4V200 Series Solenoid Valves

4V200 Series Solenoid Valves

The 4V200 series consists of 5-port, 2-position and 5-port, 3-position pilot-operated solenoid valves. Their spool design provides good sealing and responsive operation. Port sizes are PT1/8 (-06) and PT1/4 (-08), with an effective flow area of 12.0~16.0mm² (Cv 0.67~0.89). Operating pressure is 0.15~0.8MPa, proof pressure is 1.2MPa, and operating temperature is -20~70℃. The valve body is made of aluminum alloy. Control options include 2-position single solenoid (10), 2-position double solenoid (20), and 3-position double solenoid versions with closed center (30C), exhaust center (30E), or pressure center (30P). Three center functions are available for 3-position valves, while 2-position double-solenoid valves have a memory function. No oil lubrication is required. The maximum operating frequency is 5 cycles per second. A manifold base can be used to save installation space, and a manual override is provided for easy commissioning. AC220V is available as a standard voltage.

4V200 Series Solenoid Valves

4V200 Series Solenoid Valves

The 4V200 series consists of 5-port, 2-position and 5-port, 3-position pneumatic solenoid directional control valves, commonly used to control cylinder direction in automated equipment. Models are classified by function: 4V210 (5-port, 2-position, single solenoid), 4V220 (5-port, 2-position, double solenoid), and 4V230 (5-port, 3-position, with C closed-center, E exhaust-center, and P pressure-center functions). Two port sizes are available: 06 (G1/8) and 08 (G1/4). The working medium is compressed air filtered through a mesh rated at 40μm or greater. Internal or external pilot operation is available, and the valve body is made of aluminum alloy. Common standard voltages include DC24V and AC220V. Selection is based primarily on valve function (number of positions, single or double solenoid, and center function), port size, operating pressure range, operating temperature, and coil voltage.

4V200 Series Solenoid Valves

4V200 Series Solenoid Valves

The 4V200 series consists of manifold-mounted pneumatic solenoid valves in 5-port, 2-position and 5-port, 3-position configurations. Models include the 4V210 (single-solenoid, 5-port, 2-position), 4V220 (double-solenoid, 5-port, 2-position), and 4V230C (5-port, 3-position, closed-center), with DIN socket versions such as the 4V210DIN and 4V220DIN also available. The valves use internal or external pilot operation and run on compressed air filtered through a filter rated 40μm or above. Common port sizes are PT1/4 and PT3/8; exhaust configurations and effective areas vary with port size. These valves are commonly used for directional and intermediate-stop control of cylinders and actuators. DIN socket coil connections are available for convenient centralized wiring and maintenance. Select a model based on the number of positions, control type (single-solenoid/double-solenoid/closed-center), and port size.

4V300 Series Solenoid Valves

4V300 Series Solenoid Valves

The 4V300 series comprises 5-port, 2-position and 5-port, 3-position pneumatic solenoid valves for directional and on/off control in automated equipment. The working medium is air filtered through a filter rated at 40μm or finer. Internal and external pilot configurations are available. Port sizes include PT1/4 (-08) and PT3/8 (-10). Catalog models include the 4V310 and 4V320 2-position valves and the 4V330C and 4V330P 3-position valves. The compact valve bodies are suitable for directional control of pneumatic systems such as cylinders and actuators.

4V400 Series 5-Port 2-Position/5-Port 3-Position Solenoid Valves

4V400 Series 5-Port 2-Position/5-Port 3-Position Solenoid Valves

The 4V400 series comprises 5-port 2-position and 5-port 3-position solenoid valves with a pilot-operated spool design for reliable sealing and responsive operation. The 3-position valves offer closed-center, exhaust-center and pressure-center functions, while the double-solenoid 2-position valves have a memory function. The specially processed valve bore reduces friction and operating pressure, extends service life and eliminates the need for lubrication. The valves can be mounted on a manifold to save installation space. A manual override simplifies installation and commissioning. Standard voltages include AC220V, DC24V, AC110V, AC24V and DC12V. The port size is 1/2, with a choice of DIN connector or lead wire electrical connections and P or NPT threads.

50-VFE Series Pilot-Operated Explosion-Proof Solenoid Valves

50-VFE Series Pilot-Operated Explosion-Proof Solenoid Valves

The 50-VFE series consists of pilot-operated explosion-proof solenoid valves for hazardous locations where flammable gases may be present. An explosion-proof coil and pilot-operated design provide high-flow, 5-port directional control. The series is available in two valve sizes: 50-VFE3000 (size 3) and 50-VFE5000 (size 5), covering port sizes from 1/8~3/8. Electrical actuation options include single solenoid (1) and double solenoid (2), with functions such as closed center and exhaust center available as needed. Valve body options include standard (0), separate air supply to the main and pilot valves (3), and a centralized exhaust port (4, etc.). The centralized exhaust design allows exhaust to be routed away from the valve, preventing hazardous gases from accumulating nearby. Manual override options include non-push-button type (blank), push-button type (T), and tool-operated push/turn-locking type (□), for commissioning and emergency operation during power outages. Select the model using the code combination “50-VFE+valve size+electrical actuation/function+valve body option - coil voltage and manual override - port size and thread”. The coil voltage and wiring method must be compatible with the explosion-proof rating required at the installation site.

5404 Series Solenoid Valves

5404 Series Solenoid Valves

The 5404 series consists of pilot-operated, normally closed two-way solenoid valves suitable for air, water, and oil. The valve body is brass, and the oil seal is polytetrafluoroethylene (PTFE/PFPE). The sliding-spool pilot design provides reliable sealing and responsive operation, while the specially processed bore reduces friction, lowers the starting air pressure, and extends service life. Three port sizes are available: 04 (1/2″), 06 (3/4″), and 08 (1″), with respective orifice diameters of 12/20/25mm and Cv values of 2.0/5.0/10.0. Operating pressure: 5404-04, gas 1~50 and liquid 1~50; 5404-06/08, gas 1~40 and liquid 1~25. Maximum pressure resistance is 75 and 60, respectively. Operating temperature is -5~150℃, allowable voltage variation is ±10%, protection rating is IP65, insulation class is F, and power consumption is AC 5.5VA / DC 9W. Contact the manufacturer for special voltages and specifications.