Solenoid Valve — Page 2

4M(NAMUR) Series Solenoid Valve (5-Port, 2-Position)

4V400 Series Solenoid Valves

5-port, 2-position and 5-port, 3-position.

4V Series Solenoid Valve

4V Series Solenoid Valve

4R/3R Series Hand Lever Valve

4R/3R Series Hand Lever Valve

The page title is “4R/3R Series Hand Lever Valve”. The page displays models 3R210-08 and 4R210-08.

2L Series Two-Position, Two-Way Flange-Connected Solenoid Valve (Normally Closed)

2L Series Two-Position, Two-Way Flange-Connected Solenoid Valve (Normally Closed)

K25J Series Poppet Directional Control Valve

K25J Series Poppet Directional Control Valve

Two-position, five-way pneumatic poppet directional control valve.

3V3 Series Solenoid Valve (3-Port, 2-Position)

Dimensional drawings include DIN connector and wire lead versions.

6VSC Series Solenoid Valves

6VSC Series Solenoid Valves

MCF-MM Series Solenoid Pulse Valve (Submerged Type)

Submerged type.

080/090 Series Solenoid Valve Coils

080/090 Series Solenoid Valve Coils

Terminals fitted with DC coils have a polarity-sensitive indicator light. Connect “1” to the positive terminal and “2” to the negative terminal. If the connections are reversed, the indicator light will not illuminate, but the valve will still operate.

K23JD Series Poppet Directional Control Valve (Wuxi Type)

K23JD Series Poppet Directional Control Valve (Wuxi Type)

2-position, 3-way pneumatic poppet directional control valve; Wuxi type.

MCF-FS Series Solenoid Pulse Valve (Flanged Type)

MCF-FS Series Solenoid Pulse Valve (Flanged Type)

The valve inlet uses a flange connection, while the outlet connects directly to the blowpipe with a slip fitting. Choose either an electrically controlled pulse valve with a solenoid pilot valve (CA) or a pneumatically controlled pulse valve without a pilot valve. The FS valve has a 90-degree right-angle inlet and outlet configuration, with the inlet larger than the outlet.

3V200 Series Solenoid Valve (3-Port, 2-Position)

Internal structure diagrams cover the 3V210 and 3V220; dimensional drawings cover DIN connector and pre-wired versions, with dimensions in millimeters.

092 Series Two-Position, Two-Way Pilot-Operated Normally Closed Diaphragm Solenoid Valve

092 Series Two-Position, Two-Way Pilot-Operated Normally Closed Diaphragm Solenoid Valve

Two-position, two-way pilot-operated normally closed diaphragm solenoid valve.

5V Series Solenoid Valves

5V Series Solenoid Valves

Five-port, two-position and five-port, three-position solenoid valves.

3V/4V Series Manifold

3V/4V Series Manifold

CDA080 Series Coils

CDA080 Series Coils

The CDA080 series comprises solenoid coils for our pneumatic solenoid valves. Two coil types are available by mounting configuration: DIN connector type (CD) and lead-wire type (CL). Two coil inner diameters are available: A080 (inner diameter Φ8.0mm) and A090 (inner diameter Φ9.0mm). Standard voltage codes are A for AC220V, B for DC24V, C for AC110V, E for AC24V, and F for DC12V, covering common industrial power supplies. These coils can be fitted directly to 100-size solenoid valves, including the 3V100, 4V100, and 4M100 series. The terminal type (CDA080 terminal type) uses plug-in connectors. Compatible connector models are PL1515T-P1, PL1515T-P2, and PL1515T-P3, for universal AC/DC, AC-only, and DC-only wiring, respectively. When wiring, note that the DC connector has a built-in polarity-sensitive indicator: connect “1” to positive and “2” to negative. If polarity is reversed, the indicator will not light, but the coil will still operate normally. When selecting a coil, confirm the coil type, inner diameter, and standard voltage

EX0920 Series Explosion-Proof Coils

EX0920 Series Explosion-Proof Coils

The EX0920 series comprises coil assemblies for various explosion-proof solenoid valves, available in three models: EX0920, EX0920(A), and EX0920(B). The coils have an insulation (explosion-proof) rating of Exmb11T4 and explosion-proof certificate number CNEX17.3311X. All models use cable leads and are suitable for a range of explosion-proof solenoid valve applications. Standard voltages are AC220V and DC24V, with two power versions rated AC6VA/DC4W and AC5.8VA/DC3.8W, respectively. The coils have a cylindrical body with a lead cable; overall dimensions are shown in the diagram in millimeters. Select the A/B version to match the solenoid valve's required voltage, power, and explosion-proof rating. The coils are intended for installation on flameproof or encapsulated explosion-proof solenoid valves.

SY Series Solenoid Valves

SY Series Solenoid Valves

Compiled from the “SMC—Solenoid Valves” catalog page, this series comprises SMC SY-series pneumatic solenoid/directional control valves, covering body sizes such as SY3000, SY5000 and SY7000. The products use modular order codes. Common body prefixes include SY3120, SY3220, SY3420, SY5120, SY5220, SY5320, SY7220 and SY7320. The catalog lists electrical control suffixes 5G, 5LZ, 5LZD and 5GD, with connection/port options including M5, C4, C6, C8, 01 and 02. These valves are primarily installed in pneumatic control circuits, where a solenoid coil shifts the spool to control the direction of cylinders and other pneumatic actuators. Different valve body sizes and connection specifications correspond to different port sizes and flow ranges. This page provides model listings only; detailed pressure, flow and electrical specifications are not included.

VK Series Solenoid Valves

VK Series Solenoid Valves

This series is designated the VK Series and includes solenoid valve models compatible with the SMC range. The catalog page is titled “SMC—Solenoid Valves,” and the listed models use the original SMC model designations. The range mainly covers SY3000 / SY5000 / SY7000 five-port solenoid valves (including SY3120, SY3420, SY3220, SY5120, SY5220, SY5320, SY7220 and SY7320), as well as models from the VT307, VK332 and other series. The suffixes M5 / C4 / C6 / C8 / 01 / 02 on different models indicate M5 threaded ports, push-in fittings (for tubing with an outside diameter of 4 / 6 / 8 mm), and Rc1/8 and Rc1/4 female threaded ports, respectively. Codes such as 5LZD / 5LZ / 5G / 5GD in the middle of the model number denote electrical and wiring configurations; refer to the specifications for the original SMC model for detailed electrical parameters. These compact solenoid valves are primarily used for directional control in pneumatic circuits in automation equipment and are selected by cross-referencing the SMC model system.

ASCO Series Solenoid Valves

ASCO Series Solenoid Valves

ASCO series solenoid valves are directional control valves with die-cast bodies and inlets machined on a machining center. Imported seals are standard throughout the series, providing reliable sealing and responsive switching for directional control of various pneumatic actuators. Model numbers begin with A (e.g., A3V210-08, A4V210-08, A4S210-08, A4S310-08, A4M310-08, A4V310-10, and A4V410-10). The series includes two-way and five-way, direct-acting and pilot-operated valves, with some models convertible between 5/2 and 3/2 configurations. The numeric suffix indicates the port size (e.g., -08 corresponds to 1/4 inch and -10 to 3/8 inch). A new wiring-free coil is available for an additional 2 yuan per valve. Commonly used in automation equipment, fixtures, and pneumatic control circuits, these valves share mounting dimensions with the 4V and 4M series for easy replacement and maintenance.

VZ/VF Series Solenoid Valves

VZ/VF Series Solenoid Valves

VZ/VF series solenoid valves are designed for pneumatic control. The catalog lists models VZ5120, VZ5220, VF3130, VF3230, VF5120, and VF5220, with respective port sizes of 1/8, 1/8, 1/4, 1/4, 3/8, and 3/8. The series is suitable for directional control and on/off switching in pneumatic systems and can be used with common air preparation components and actuators. Select the valve according to the port thread size and required valve body model.

MVSD Series Solenoid Valves with Die-Cast Bodies

MVSD Series Solenoid Valves with Die-Cast Bodies

MVSD series solenoid valves feature die-cast bodies and imported seals as standard. Models include MVSD180, MVSD220, MVSD260, MVSD300, MVSD460 and MVSD600, with port sizes of 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch. Each model is available in -4E1 and -4E2 configurations for different pneumatic control circuits. These high-flow valves are easy to install and commonly used in automation equipment, door pumps and tool-release cylinders.

SY Series Solenoid Valves

SY Series Solenoid Valves

SY series solenoid valves are pilot-operated five-port valves with a compact design, high flow rate, and fast response. They are widely used in pneumatic control circuits for automated equipment. The die-cast valve body and standard imported seals provide a long service life. Port sizes include M5, 1/8, and 1/4, with coil voltage options of DC24V, DC12V, and AC220V to meet different electrical control requirements. The numbers in the model designation indicate the series size and function code. The valves can be used with a variety of manifolds and bases. They are suitable for cylinder actuation and directional control in machinery, electronics, packaging, food, and other industries.

VX Series Solenoid Valves

VX Series Solenoid Valves

VX series solenoid valves are designed for pneumatic control lines in factory automation. The VX2120 sub-series listed in the catalog includes four port sizes: VX2120-06, VX2120-08, VX2120-10, and VX2120-15, with 1/8″, 1/4″, 3/8″, and 1/2″ pipe ports, respectively. Select the port thread size to match the piping. These valves are suitable for pneumatic circuits requiring electrically controlled on/off or directional switching. Detailed specifications such as operating voltage, working pressure, flow rate, valve body material, and protection rating are not provided on this page. Confirm these details using the complete catalog, nameplate, or supplier technical documentation before making a selection.

VP Series Solenoid Valves

VP Series Solenoid Valves

The VP series consists of 2-position, 3-way pilot-operated solenoid valves, including the VP342 (port size PT1/4, effective area 16mm², CV=1.0) and VP542 (port size PT3/8, effective area 44mm², CV=2.1). They use internal or external pilot actuation and have an operating pressure range of 0.2~0.8MPa, a proof pressure of 1.5MPa, and an operating temperature range of -10~50°C (without freezing). The body is made of aluminum alloy and requires no lubrication. Maximum operating frequency is 5 cycles/second, and response time is less than 0.05 seconds. Protection rating is IP65 (DIN40050), and heat resistance is Class B. G or NPT port threads and DIN connector or lead-wire wiring are available. The standard voltage is AC220V, with several other voltage options. The valves offer reliable sealing, quick response, high flow, and a manual override. They can be integrated with a manifold to save installation space.

VF Series Solenoid Valves

VF Series Solenoid Valves

VF series solenoid valves are pneumatic directional control valves for use with air. They are available in two-position and three-position configurations, with single or double coils and center functions including closed center, exhaust center, and pressure center. The port size is 3/8, with an effective area of 36~45 mm², an operating pressure of approximately 0.1~0.9 MPa, a response time of ≤30 ms (two-position) or ≤50 ms (three-position), and a maximum operating frequency of 5 cycles/second or 3 cycles/second. Coils are available with direct leads (G) or a DIN connector (D), with standard voltages of AC110V/220V(50Hz) and DC12V/24V, Class B insulation, power consumption of 5.6VA/3.4VA or 1.8W/2W (with indicator light), and a surge suppressor. Common specifications include a maximum ambient and fluid temperature of 50℃, no lubrication required, a screwdriver-locking manual override, 30G/5G shock/vibration resistance, and dustproof seals. Models range from VF5120-△B-02 to VF5520-△B-02.

TWSY Series Solenoid Valves

TWSY Series Solenoid Valves

The TWSY series is a range of pneumatic solenoid valves (valve bodies) available in four sizes: 3000, 5000, 7000, and 9000. These cover pneumatic control circuits with medium-low to high flow rates. Side mounting brackets, models SX3000-16-A, SX5000-16-A, and SX7000-16-A, are available to secure the valve bodies to a base plate, manifold, or equipment frame. No bracket is offered for the 9000 size because of its different valve body construction. When selecting a valve, first determine the 3000/5000/7000/9000 size based on the required flow rate and port size, then select the corresponding bracket for the mounting method or choose a valve body without a bracket. The catalog lists only the available sizes and their matching bracket models. Details such as coil voltage, valve function (5-port, 2-position/5-port, 3-position), and port thread type must be confirmed in the detailed specifications.

VM Series Pneumatic Valves

VM Series Pneumatic Valves

The VM series pneumatic valves include basic (base-piping) models such as VM132-M5-00A and VM133-M5-00A, designed for directional control in air and inert gas lines. The operating pressure range is -100kPa~1MPa, covering vacuum to medium-pressure applications. Ambient and fluid temperatures must be between -5~60℃ (no freezing). Side-piping and bottom-piping configurations are available. The valve body has panel mounting holes for M5×0.8 screws (4mm deep) and an M14×1 lock nut (5mm thick, 17mm across flats) for panel mounting. The exhaust port is a tapered 3-way type. The required operating force is approximately F.O.F.=26N (0.5MPa, VM132)/13N (VM133), with travel of P.T.=1.5mm, O.T.=1.5mm and T.T.=3mm/60°. These valves are suitable for manual or mechanical control on compact equipment panels.

DMF Series Solenoid Pulse Valves

DMF Series Solenoid Pulse Valves

DMF series solenoid pulse valves are core components of baghouse dust collector cleaning systems. The right-angle (Z-type) design has an inlet-to-outlet angle of approximately 90°, making it easy to connect to the air header and dust collector blowpipe. It provides smooth airflow and a powerful blast, delivering the air pulses required for effective cleaning. A hard-sealing design with seal memory between the diaphragm assembly and air chamber ensures sealing performance and durability over long-term use. The series includes right-angle, submerged, threaded, straight-through, and pneumatically controlled explosion-proof designs. Nominal sizes range from G3/4"~G4" (Φ20~Φ102). The valve body is made of ADC alloy, the pilot head is made of 430FR stainless steel, and the diaphragm is made of imported nitrile rubber. Standard voltage options are AC220V, AC110V, AC24V, and DC24V, with model code positions for temperature ratings and other options.

DMF-Y Series Solenoid Pulse Valve (Immersion Type)

DMF-Y Series Solenoid Pulse Valve (Immersion Type)

The DMF-Y series comprises immersion-type, also known as embedded, solenoid pulse valves. Mounted directly on the air manifold (air tank), they offer improved flow and lower pressure loss, making them particularly suitable for applications with low air supply pressure. They are widely used in pulse-jet cleaning systems for baghouse dust collectors. The valve body, upper cover, middle cover, and small passage cover are die-cast from ADC aluminum alloy. The pilot assembly is made of 430FR stainless steel, while the large and small springs and fasteners are made of 321 stainless steel. The diaphragms and O-rings are made of imported nitrile rubber (NBR). Nominal diameters range from Φ25 to Φ102. Outlet connections are available in threaded G1″ to G1 1/2″ and embedded Ø50 to Ø102 configurations. The valves have 1 to 2 diaphragms, weigh 0.8 to 5.65 kg, and have a flow coefficient that increases with diameter.

DMF-Z Series Right-Angle Solenoid Pulse Valves

DMF-Z Series Right-Angle Solenoid Pulse Valves

The DMF-Z series comprises right-angle solenoid pulse valves, also known as submerged or embedded valves. A solenoid pilot controls the opening and closing of the diaphragm assembly to deliver an instantaneous pulse of compressed air. These valves are widely used for programmed pulse blowing in baghouse dust collectors, pulse-jet cleaning systems, and pneumatic conveying equipment. The valve body is die-cast from ADC aluminum alloy, the pilot assembly is made of 430FR stainless steel, and the large and small springs are made of 321 stainless steel. The diaphragm assembly and O-rings are made of imported nitrile rubber. Features include good flow capacity, low pressure loss, fast response, oil and wear resistance, and long service life, making the valves suitable for applications with relatively low air supply pressure. Nominal diameters range from Φ20 to Φ102. Outlet connections are available in threaded (G1″, G1 1/2″, etc.) and flanged (Ø50–Ø102) types. Working pressure is typically 0.2–0.6 MPa. Single- or double-diaphragm configurations can be selected to suit the dust collector's air manifold specifications.

DMF-ZM Series Solenoid Pulse Valves (Nut Connection)

DMF-ZM Series Solenoid Pulse Valves (Nut Connection)

The DMF-ZM series consists of nut-connection solenoid pulse valves used primarily in baghouse dust collector cleaning systems. The valve body is made of ADC aluminum alloy, the pilot head assembly of 430FR stainless steel, and the springs and fasteners of 321 stainless steel. The diaphragm is made of imported nitrile rubber, and the coil uses high-quality enamelled wire. Nominal diameters are Φ20, Φ25 and Φ40, with port sizes of 3/4″, 1″ and 1 1/2″. The valves have 1~2 diaphragms, inlet/outlet diameters of Φ27~Φ48 mm, and weights of approximately 0.9~2.0 kg. A solenoid pilot controls the opening and closing of the diaphragm, producing short, powerful pulses of compressed air for cleaning dust collector filters. The nut connections attach the valve to the air reservoir and blowpipe during installation.

DMF-T Series Straight-Through Solenoid Pulse Valves

DMF-T Series Straight-Through Solenoid Pulse Valves

The DMF-T straight-through solenoid pulse valve has aligned inlet and outlet centerlines at an angle of 180°. The inlet connects to the air reservoir and the outlet to the blowpipe. Its unobstructed, low-resistance airflow path delivers cleaning pulses suited to pulse-jet cleaning systems in baghouse and cartridge dust collectors. The valve body, upper cover, middle cover and small passage cover are die-cast from ADC aluminum alloy. The pilot assembly is made of 430FR stainless steel, while the large and small springs and fasteners are made of 321 stainless steel. The general-purpose diaphragm assembly and diaphragm assembly use imported nitrile rubber (NBR), and the coil is made of high-quality enameled wire. Nominal diameters range from Φ20 upward, and the accompanying nut-type DMF-ZM subseries (Φ20/Φ25/Φ40) meets different pulse-jet airflow requirements.

MCF Series Pulse Valves

MCF Series Pulse Valves

MCF series pulse valves are high-performance diaphragm valves for dust collectors and cleaning systems, with female threaded inlet and outlet ports. They are available in electrically controlled versions (with a solenoid pilot valve, designated MCF/CA) and pneumatically controlled versions (without a pilot valve, designated RCA). The T series features 90° right-angle valves. The valve body, upper cover, and intermediate cover are die-cast ADC aluminum alloy; the pilot head assembly is 430FR stainless steel; the large and small springs are 321 stainless steel; the fasteners are 302 stainless steel; and the diaphragm is imported nitrile rubber, with fluororubber available as an option. Configurations include right-angle (1), immersed (MM), threaded (DD), and flanged (FS). Standard nominal sizes are 15, 20, 25, 35, 45, 50, 62, and 76mm, with corresponding 1/2"~3" threads. Operating pressure is 0.3~0.8MPa, and the medium is clean air. Voltage options are AC220V/AC110V/AC24V/DC24V, with an IP65 protection rating. The temperature range is -40~82℃ for nitrile diaphragms and -29~232℃ for fluororubber diaphragms. Relative humidity is ≤80%, and diaphragm life is approximately one million pulses or three years. Widely used with filter bags, filter cartridges, flat belts, and ceramic

MCF Series Solenoid Pulse Valves

MCF Series Solenoid Pulse Valves

MCF series solenoid pulse valves are diaphragm-type pulse jet valves used primarily in baghouse dust collector cleaning systems. A solenoid pilot controls the opening and closing of the diaphragm to release an instantaneous pulse of compressed air. Nominal valve diameters range from Φ25 to Φ102, with outlet connections including G1″, G1 1/2″, Φ50, Φ62, Φ76, Φ90 and Φ102. Weights range from 0.8 to 5.65 kg and flow coefficients from 26.24 to 268.29. The valves are compatible with 1″ to 4″ pulse jet piping. They use common diaphragm assemblies, and wear parts such as pilot heads, springs and O-rings are replaceable. Catalog dimensional drawings cover models MCF15 through MCF40 and MCF50 through MCF76. Values in the “number of diaphragms” column of the model table should be treated as port sizes in inches.

MCF-DD Series Right-Angle Pulse Valve

MCF-DD Series Right-Angle Pulse Valve

The MCF-DD series pulse valves are high-performance diaphragm valves with double-dresser inlet and outlet ports. The DD type features a 90° right-angle design and can be mounted directly on the air manifold for pulse-jet cleaning systems in baghouse dust collectors. Options include electrically controlled pulse valves with a solenoid pilot valve or pulse valves without a pilot valve. Key specifications include inlet and outlet inside diameters (25~40mm), port thread sizes (1", 1 1/2"), diaphragm count and flow coefficient. The valve body is made of ADC aluminum alloy; the universal diaphragm assembly and diaphragm assembly use imported nitrile rubber; the large and small springs are made of 321 stainless steel; the fasteners and sealing rings are made of 302 stainless steel; and the pilot head assembly is made of 430FR stainless steel. The coil uses high-quality enameled wire. In addition to the 25DD and 45DD, the series includes models for a range of blowpipe diameters (50/62/76/89/90/102mm, etc.), which can be selected according to the air manifold position and mounting hole dimensions.

AMF Series Pulse Valves

AMF Series Pulse Valves

AMF series pulse valves are solenoid pulse valves designed for pulse-jet cleaning systems in baghouse dust collectors. Their right-angle valve body provides high flow, long service life and rapid opening and closing, ensuring reliable, stable operation. The body is die-cast ADC alloy, with a 430FR stainless steel pilot assembly, a 321 stainless steel main spring, 302 stainless steel fasteners and an imported nitrile rubber/TPE diaphragm assembly. There is no threaded shaft to seize, making maintenance quick and easy. Operating pressure is 0.4~0.6MPa, and the operating medium is clean air. Three standard voltages are available: DC24V (0.8A), AC110V (0.46A) and AC220V (0.23A). Relative air humidity is ≤85%, and the protection rating is IP65. Temperature ratings are class 1 (-25~80℃), class 2 (-25~150℃) and class 3 (-25~230℃). Bore sizes range from 25~75mm, with pipe connections from 3/4" to 3". Configurations include A right-angle and B drip-type, with the optional J improved design.

MCF FS Series Solenoid Pulse Valves

MCF FS Series Solenoid Pulse Valves

The MCF FS series is a second generation of ultra-high-performance solenoid pulse valves, also known as pulse cleaning valves, designed primarily for pulse-jet cleaning systems in baghouse dust collectors. The valve inlet has a flange connection, while the outlet slips directly onto the blow pipe for easy installation and removal. Options include an electrically controlled pulse valve with a solenoid pilot (CA) or a pneumatically controlled pulse valve without a pilot. The FS type has a straight-through valve design. The operating pressure range is 0.4~0.6MPa. Diaphragms are available in nitrile rubber (Nitrile, -40℃~82℃) or fluororubber (Viton, -29℃~232℃) for different temperature conditions. Common models include MCF25FS (1 diaphragm, flow coefficient 22/25) and MCF45FS (2 diaphragms, flow coefficient 52/61). The inlet and outlet connection pipe inside diameters and the blow pipe outside diameter increase with model size.

EX Series Explosion-Proof Coils

EX Series Explosion-Proof Coils

EX series explosion-proof coils are solenoid coils designed for use with various explosion-proof solenoid valves in environments containing explosive gases. The series includes EX1320, EX1420, and EX1620 models, with EX1320 available in sizes 11, 12.5, and 13.7. Standard voltages are AC220V and DC24V, with corresponding standard power ratings of AC25VA and DC15W. The coils use cable leads for connection, carry the explosion-proof marking Exmb11T4, and have explosion-proof certificate CNEX17.3311X. They can be used with a wide range of explosion-proof solenoid valves. When selecting a coil, match the model to the valve body interface, voltage, and power requirements, and verify the explosion-proof rating and temperature class for the operating environment.

SLP Series 2/2-Way Pilot-Operated Solenoid Valve (Normally Closed)

SLP Series 2/2-Way Pilot-Operated Solenoid Valve (Normally Closed)

The SLP series is a normally closed, 2/2-way pilot-operated solenoid valve with a pilot-operated design, suitable for gases, liquids, and other media. The valve body is available in brass (no code) or stainless steel (B). Thread types include G (no code) and NPT (T). Seals are available in NBR (no code), EPDM (E), VITON (V), or VMQ (Q). Operating voltages include AC 220 V, AC 110 V, AC 24 V, DC 24 V, and DC 12 V. Thread sizes include 1/2", 3/4", 1", 1/4", 1/2", and 2", accommodating a range of piping requirements. Highly reliable and built for a long service life, this valve is widely used in industrial applications such as automation control and fluid handling.

ZCT Series 2/2-Way Piston-Type Stainless Steel Solenoid Valve (Normally Closed)

ZCT Series 2/2-Way Piston-Type Stainless Steel Solenoid Valve (Normally Closed)

The ZCT Series is a 2/2-way, normally closed, piston-type stainless steel solenoid valve designed for fluid control. The valve body is made of stainless steel and is available with G or NPT threaded connections. Operating voltages include AC 220 V, AC 110 V, and DC 24 V. Featuring a pilot-operated piston design, the series offers high-pressure resistance and a long service life. It is widely used in pipelines carrying water, gas, oil, and other media.

YF Series 2/2-Way Solenoid Valve for Burners

YF Series 2/2-Way Solenoid Valve for Burners

The YF Series is a normally closed 2/2-way solenoid valve designed for burners and suitable for controlling fuel lines. Available thread sizes are 1/8", 1/4" and 3/8". The body is available in copper or stainless steel (B), with G or NPT threads (T). Seal materials include NBR, EPDM (E) and VITON (V). Operating voltages are AC 220 V (A), AC 110 V (B), AC 24 V (C) or DC 12 V (D). The model code combines the base model YF-2 with the subsequent options.

JM322 Series Direct-Acting Solenoid Valves

JM322 Series Direct-Acting Solenoid Valves

The JM322 series is a range of direct-acting solenoid valves from SNS Pneumatic (Ningbo) Group. They operate without pilot pressure and use compressed air filtered through a 40μm filter. The port size is G1/4 (code 08), the operating pressure range is 0-0.8MPa (0-114psi), and the operating temperature range is -5~60℃ (28-140℉). No additional lubrication is required. Based on the standard JM322 model, the series includes R, P, PP, PPL, PB, EB and TB variants with different coil types, electrical connections and protective configurations. These meet a range of application needs, including conventional control, centralized wiring and indicator lights. Compact, fast-responding and long-lasting, these valves are widely used for on/off control of air circuits in automated equipment.

JMJ522 Series Direct-Acting Solenoid Valves

JMJ522 Series Direct-Acting Solenoid Valves

The JMJ522 series consists of direct-acting solenoid valves for compressed air filtered through a 40μm filter. The port size is 08 (G1/4), the operating pressure range is 0~0.8 MPa (0~114 psi), and the operating temperature range is -5~60℃ (28~140℉). No lubrication is required. The series includes models JMJ522, JMJ522P, JMJ522PPL, JMJ522PB, JMJ522EB and JMJ522TB; JMJ522R is also listed in the dimensional drawings. Different suffixes indicate different structural or functional configurations; refer to the model and dimensional drawings for details.

K23J Series 2-Position 3-Way Valves

K23J Series 2-Position 3-Way Valves

K23J series 2-position 3-way valves, including control variants designated K23JD and K23JQ, are pneumatic directional control valves used to start, stop, and switch airflow. They are widely used for pneumatic control, air blowing, clamping, and cylinder direction control in automated equipment. The valve bodies offer a range of threaded ports, including G1/8"(M10×1), G1/4"(M12×1.25), G3/8"(M16×1.5), G1/2"(M20×1.5), G1 1/4"(M42×2), G1 1/2"(M48×2), and G2"(M60×2). D2 dual-solenoid control is a common configuration, and different initial states are available (normally closed / normally open, typically by interchanging the P and O chambers). The dimensional table also lists larger sizes such as F32, F40, and F50, with port sizes and overall and mounting dimensions including B, C, E, F, G, HD, HQ, and J specified for easy selection and installation planning. The model designation combines the base model K23J, size code, control method, and port code, allowing flexible configuration according to pneumatic line size and control requirements.

K25JD Series Solenoid Directional Control Valves

K25JD Series Solenoid Directional Control Valves

The K25JD series consists of sliding-spool (plunger) pneumatic solenoid directional control valves. A solenoid pilot and air pressure shift the valve spool to control airflow to various cylinders and pneumatic actuators. Models are designated K25JD-□, where the box represents the nominal bore (mm). Select the appropriate size based on the required flow rate and pipe bore. Key specifications: operating pressure range 0.15~0.8 MPa; leakage ≤10 cm³/min; switching time ≤0.06 s; switching frequency ≥10 Hz; flow capacity S value ≥10 mm³; ambient temperature -10~55℃; medium temperature -5~50℃. Compact, fast-responding and well sealed, these valves are suitable for pneumatic control circuits in automated production lines, packaging machinery, assembly lines and other applications. Ensure that the air supply is clean and dry during installation. An upstream filter regulator is recommended. Operate within the specified pressure and temperature ranges to ensure reliable switching and long service life.

K35D-H Series Spool-Type Directional Control Valve

K35D-H Series Spool-Type Directional Control Valve

The K35D-H series consists of spool-type pneumatic directional control valves. The pneumatic control pressure is lower than the valve body operating pressure, making these valves suitable for applications requiring intermediate cylinder position control. Three center configurations are available: closed center, exhaust center, and pressure center, accommodating requirements such as stopping, positioning, and pressure relief during cylinder travel. Key performance parameters: operating pressure range 0.15~0.8MPa, leakage ≤10cm³/min, switching time ≤0.06s, switching frequency ≥10Hz, flow capacity S value ≥10mm³, ambient temperature -10~55℃, and medium temperature -5~50℃. The model designation consists of the base model K35D-H, the nominal bore (represented by □ in the catalog and selected according to the actual bore), and the function code (no code for the standard type; P and Y are also available). Examples include K35D-H-□, K35D-H-□P, and K35D-H-□Y. Port sizes vary according to model size.