2-Way Solenoid Valves

2L Series Fluid Control Valve (2-Way, 2-Position)

2L Series Fluid Control Valve (2-Way, 2-Position)

The 2L series fluid control valve is a direct-acting, normally closed, 2-way, 2-position solenoid valve for on/off control of air, water, steam and other media. It has a brass body and an EPDM seal. It is suitable for liquids with a viscosity below 20CST, with an operating pressure range of 0~1.5MPa, a maximum pressure rating of 1.5MPa, an operating temperature range of -5~185℃ and a voltage tolerance of ±10%. Available flow orifice diameters include 17, 22, 30 and 50mm, with corresponding Cv values of 4.8~48 m³/h and port sizes from 1/2″ to 2″. The model designation consists of the main model (2L+flow orifice diameter code) and the port size code. For example, 2L170-15 indicates a 17mm flow orifice and a 1/2″ port. Contact the manufacturer for custom voltages and specifications.

2P Series Fluid Control Valves (2-Port, 2-Position)

2P Series Fluid Control Valves (2-Port, 2-Position)

The 2P series consists of direct-acting, normally closed, 2-port, 2-position solenoid valves that switch quickly and responsively when energized. They are compact, small, lightweight, and easy to install and remove. The orifice diameter is 2.5mm, the Cv value is 0.23, and port sizes are G1/8 (2P025-06) and G1/4 (2P025-08). Suitable media include air, water, and oil, with a fluid viscosity below 20CST. Operating pressure is 0-0.7MPa, proof pressure is 1.05MPa, and valve response time is less than 0.03 seconds. The body is made of nylon 66 and the seals are VITON. The valve uses a 2P025 solenoid coil and supports AC 50/60Hz and DC. The allowable voltage range is ±10%~±15%, power consumption is 7.0VA, insulation is Class B, and the socket diameter is Φ35. The coil is rated IP65 and is available with terminal or lead-wire connections.

2Q Series Solenoid Valves

2Q Series Solenoid Valves

The 2Q series consists of direct-acting two-way solenoid valves suitable for air, water, oil, gas and other media. The body is made of brass, and the seal is made of polytetrafluoroethylene (PTFE). The operating temperature range is -5~100℃, and the fluid viscosity must be below 50CST. The operating pressure is 0~7MPa, the maximum pressure rating is 10.5MPa, and the control pressure is 3~6MPa. The valves are available in three flow orifice sizes: 22, 35 and 50mm, with corresponding Cv values of 12, 24 and 48. Port sizes include 3/4", 1", 1-1/2" and 2", with control port sizes of 2-G1/8" or 2-G1/4". Contact the manufacturer for custom voltages and specifications.

2S Series Solenoid Valves

2S Series Solenoid Valves

The 2S series consists of two-way solenoid valves with stainless steel bodies and stainless steel seals, as specified in the catalog. They are designed for on/off control of water, air, and other media in piping systems requiring corrosion resistance. The sizes listed on this page are 25-08 and 25-10 (corresponding to the common 08 and 10 port size categories). The nominal maximum working pressure column lists values including 3, 4, and 0.5MPa, indicating that the series covers pressure ratings from low-pressure air lines to medium-pressure liquid lines. Confirm the appropriate rating for the actual medium and pressure when selecting a valve. Both the body and seals are stainless steel, helping reduce corrosion of internal components and extend service life. The valves have a two-position, two-way, normally closed design: they open when energized and close when de-energized. They can be installed horizontally or vertically in the pipeline. The model column is missing from the scanned table, so refer to the product label or complete catalog for the exact model code. Multiple coil voltages, wiring methods, and connection thread sizes are also available within the series and must be specified when ordering.

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)

2S Series 2-Port, 2-Position Solenoid Valve (Direct-Acting)

The 2S series comprises direct-acting, 2-port, 2-position solenoid valves with one inlet and one outlet. The solenoid coil directly actuates the valve element, allowing the valve to open at zero differential pressure without pilot pressure. These valves provide on/off control for neutral fluids such as air, water and oil. The direct-acting design ensures reliable operation even at low inlet pressures or under vacuum, with fast response, simple construction and easy maintenance. Valve bodies are typically made of brass or engineering plastic, with NBR/EPDM seals to suit different media. The series offers multiple flow orifice and connection sizes, with connection sizes from M5 to 2". The typical operating pressure range is 0~1.0MPa (up to 1.5MPa for some sizes), and the medium temperature range is approximately -5~80℃ (up to 185℃ for high-temperature versions). Common coil voltages are DC12V/DC24V/AC110V/AC220V, with an allowable voltage fluctuation of ±10%. These valves are widely used for fluid on/off control in automation equipment, water treatment, packaging machinery, medical devices and pneumatic control systems. When selecting a valve, confirm the medium, connection size, flow orifice size (Cv value), operating differential pressure and coil voltage. Contact the manufacturer for custom voltages or specifications.

2V Series 2-Way, 2-Position Solenoid Valves

2V Series 2-Way, 2-Position Solenoid Valves

The 2V series of 2-way, 2-position solenoid valves includes the 2V025, 2V130 and 2V250 subseries, all normally closed. The direct-acting 2V025 is lightweight and compact, with fast, responsive switching. It has a Φ2.5mm orifice, a CV value of 0.23, PT1/8 and PT1/4 port sizes, and an operating pressure of 0-1.0MPa. The diaphragm pilot-operated 2V130 and 2V250 offer low power consumption and high flow rates. Their respective orifice diameters are Φ13mm and Φ25mm, CV values are 6.20 and 13.00, port sizes are PT3/8 and PT1/2 for the 2V130 and PT3/4 and PT1 for the 2V250, and operating pressure is 0.05-1.0MPa. The valve bodies are nickel-plated brass. The 2V025 uses VITON fluoroelastomer seals, while the 2V130 and 2V250 use NBR seals. The valves have a class B heat resistance rating, a proof pressure of 1.5MPa and a response time of less than 0.05 seconds. Suitable media include air, water and oil. PT threads are standard, with NPT and G threads available as options. Electrical connections are available in DIN connector or lead wire configurations, with a range of standard voltages.

2V Series 2-Position, 2-Way Solenoid Valves

2V Series 2-Position, 2-Way Solenoid Valves

The 2V series consists of 2-position, 2-way, direct-acting, normally closed solenoid valves for air, water, and oil, with an operating pressure range of 0-1.0MPa (0-145psi). Three sizes are available by flow orifice diameter: 2V025 (2.5mm, Cv 0.23), 2V130 (13.0mm, Cv 6.20), and 2V250 (25.0mm, Cv 13.00), with port sizes from PT1/8 to PT1. The valves are direct-acting and normally closed, providing on/off control for a variety of fluid lines. DIN connector and lead-wire versions are available to suit different installation requirements. They are widely used in automated equipment, water, air, and oil lines, and general industrial fluid control applications.

2W/2P Series 2-Way, 2-Position Fluid Control Valves

2W/2P Series 2-Way, 2-Position Fluid Control Valves

The 2W/2P series 2-way, 2-position fluid control valves are direct-acting, normally closed solenoid valves for on/off control of air, water, oil, steam, and other media in pipelines. The 2P series (2P025-06, 2P025-08) has a nylon 66 body, VITON seals, a 2.5mm flow orifice, a Cv value of 0.23, G1/8 and G1/4 port sizes, and a response time below 0.03 seconds. Its coil has Class B insulation and IP65 protection, with direct wire leads for electrical connection. The 2W series (2W025~2W500) has a brass body and NBR or VITON oil seals, with flow orifices from 2.5~50mm, Cv values of 2.3~76, and port sizes of 1/8"~2". Its operating pressure is 0~0.7MPa, maximum proof pressure is 1.0MPa, operating temperature is -5~100℃, and voltage tolerance is ±10%. These valves switch quickly, have a compact, small design, and are easy to install and remove. They are widely used for automated fluid pipeline control.

2W Series 2-Port, 2-Position Solenoid Valve

2W Series 2-Port, 2-Position Solenoid Valve

The 2W series consists of normally closed, 2-port, 2-position solenoid valves for on/off control of fluids such as air, water, and oil. The catalog identifies the series with the specification code 2W and provides a symbol table explaining the model code positions: the first position is the specification code 2W (2-port, 2-position, normally closed), followed in order by the flow orifice diameter (Φmm), working medium, operating method, and type. These sections are written together to form the complete model number. When selecting a valve, use the flow orifice diameter to determine the nominal bore and flow capacity, then select the appropriate code positions based on the working medium (air, water, oil, etc.), operating method (direct-acting, pilot-operated, etc.), and mounting type. The OCR text on this page is severely degraded and repetitive; only the specification code 2W and flow orifice code 160 can be clearly identified. The available values for the remaining positions (working medium, operating method, and type) were not fully preserved in the source and must be supplemented from the complete catalog page before model codes can be assembled. This entry should not be used as a complete selection reference at this time.

5404 Series Solenoid Valves

5404 Series Solenoid Valves

The 5404 series consists of pilot-operated, normally closed two-way solenoid valves suitable for air, water, and oil. The valve body is brass, and the oil seal is polytetrafluoroethylene (PTFE/PFPE). The sliding-spool pilot design provides reliable sealing and responsive operation, while the specially processed bore reduces friction, lowers the starting air pressure, and extends service life. Three port sizes are available: 04 (1/2″), 06 (3/4″), and 08 (1″), with respective orifice diameters of 12/20/25mm and Cv values of 2.0/5.0/10.0. Operating pressure: 5404-04, gas 1~50 and liquid 1~50; 5404-06/08, gas 1~40 and liquid 1~25. Maximum pressure resistance is 75 and 60, respectively. Operating temperature is -5~150℃, allowable voltage variation is ±10%, protection rating is IP65, insulation class is F, and power consumption is AC 5.5VA / DC 9W. Contact the manufacturer for special voltages and specifications.