Air Preparation Components

395 Series Round Containers

395 Series Round Containers

The 395 Series round containers are used for pressure setting and piping connections in pneumatic systems. Models include 395.211, 395.251, 395.261, 395.281 and 395.291, with bore sizes of 6, 8, 10, 15, 20 and 25 mm and pipe connections of G1/8, G1/4, G3/8, G1/2, G3/4 and G1. All models have a set pressure range of 0.05–1.0 MPa, a maximum working pressure of 1.0 MPa, and an ambient and medium temperature range of 0–+50℃. The dimensional table provides installation and connection dimensions A/B/C/D/E/F/G/J/K/L/V to support selection by bore size, port thread and available installation space.

396 Series Lubricators

396 Series Lubricators

The 396 series lubricator is a pneumatic air preparation component that atomizes lubricating oil and carries it with compressed air to downstream pneumatic equipment to lubricate moving parts. The series is available in six port sizes: 6, 8, 10, 15, 20, and 25 mm, with corresponding G1/8, G1/4, G3/8, G1/2, G3/4, and G1 connection threads. Bowl capacities are 40, 120, and 300 cm³, the maximum operating pressure is 1.0 MPa, and the ambient and medium temperature range is 0~+50℃. Before installation, blow the piping clean with air. Pipe fittings and vertical installation are recommended to ensure a stable oil mist output.

397 Series Filter Regulators

397 Series Filter Regulators

397 series filter regulators combine a filter and a pressure regulator to filter and regulate the air supply in pneumatic lines. Bore sizes range from 6~25 mm, with connection threads from G1/8~G1, a pressure setting range of 0.05~1.0 MPa, a maximum working pressure of 1.0 MPa, and bowl capacities of 40/120/300 cm³. The ambient and media temperature range is 0~+50℃. Depending on the model, filtration ratings include 50-75 μm, 25-50 μm, 10-25 μm, and 5-10 μm. Before installation, blow out the piping, use suitable fittings, and install the unit vertically wherever possible.

398 Series Air Filter Combination

398 Series Air Filter Combination

The 398 Series air filter combination integrates an air filter, a pressure reducing valve (pressure regulator), and a lubricator into a three-piece air preparation unit. It filters and cleans compressed air, regulates pressure, and provides oil mist lubrication. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit should be installed vertically. The entire series has a pressure adjustment range of 0.05~1.0MPa, a maximum working pressure of 1.0MPa, and an ambient and media temperature range of 0~+50℃. The standard filter pore size is 50~75μm, with 25~50μm, 10~25μm, and 5~10μm options. Six connection pipe sizes are available: 6, 8, 10, 15, 20, and 25mm, corresponding to G1/8", G1/4", G3/8", G1/2", G3/4", and G1" threads. Overall and mounting dimensions A, B, C, D, E, F, Z, G, V, N, and M are provided to facilitate piping and bracket layout.

399 Series Air Filter Combination

399 Series Air Filter Combination

The 399 series air filter combination (three-piece air preparation unit) consists of an air filter, pressure regulator and lubricator. It filters compressed air, regulates pressure and provides oil mist lubrication in compressed air lines. Connection sizes are 6mm, 8mm, 10mm, 15mm, 20mm and 25mm, corresponding to G1/8"~G1" threads. The pressure setting range is 0.05~1.0MPa, the maximum working pressure is 1.0MPa, and the ambient and medium temperature range is 0~+50℃. The standard filtration rating is 50~75μm; precision filter elements rated 25~50μm, 10~25μm and 5~10μm are also available. The valve body comes in three sizes according to port size, with M30×1.5, M50×1.5 and M67×1.5 mounting threads. Before installation, blow out the piping with air. Pipe fittings are recommended, and the unit must be installed vertically.

AC30 Series F.R.L. Units

AC30 Series F.R.L. Units

The AC30 series F.R.L. (Filter, Regulator, Lubricator) combines an air filter, pressure regulator and lubricator in one unit to filter the air supply, reduce and stabilize pressure, and provide oil-mist lubrication in pneumatic systems. It is typically installed at the equipment's air supply inlet. The AC30 series designation corresponds to a size 30 body, with four port sizes: 01 (1/8"), 02 (1/4"), 03 (3/8") and 04 (1/2"). Pressure gauge options include no gauge, a square flush-mounted gauge with limit indicators, or a round gauge with limit indicators. Ordering codes take the form AC30-□ 03 D E □ □ B. In addition to port size and pressure gauge, the code includes positions for accessories such as drain valves and brackets; each position must be confirmed against the manufacturer's selection chart. The compact unit is easy to maintain, and the filter and lubricator bowls can be removed and replaced individually.

ARM10 Series Miniature Standalone Pressure Regulators

ARM10 Series Miniature Standalone Pressure Regulators

The ARM10 series miniature standalone pressure regulator is a compact air pressure control component. Its small, lightweight standalone design allows it to be installed directly on piping or equipment in confined spaces. The series includes two types: the standard type (ARM10) and the front-handwheel type (ARM10F). The standard type has a simple design, while the front-handwheel type places the adjustment handwheel on the front for convenient pressure adjustment and monitoring from the front panel. Output pressure is adjusted using the handwheel, making the regulator suitable for secondary pressure control in pneumatic systems and providing a stable supply of operating pressure to cylinders and actuators. The ordering code combines the series designation, port size, IN/OUT fitting type, accessories, and other options, as in ARM10-06BG-Z-N. Users can select combinations based on port specifications, fitting type, and accessory requirements.

ARM10F Series Miniature Standalone Pressure Regulator (Front Handwheel Type)

ARM10F Series Miniature Standalone Pressure Regulator (Front Handwheel Type)

The ARM10F series is a miniature standalone pressure regulator with a front handwheel and a compact, integrated design. The front handwheel makes it easy to set and adjust pressure after panel mounting. It is suitable for pneumatic circuits with limited space, instruments, and small automated equipment. This page also lists the standard ARM10 model; the ARM10F is its front-handwheel variant. When selecting a model, confirm the port specifications, IN/OUT fitting types, accessories, and complete ordering code. The scanned code table on this page contains duplicates and omissions; refer to the complete catalog or manufacturer's technical documentation for specific pressure, flow, port size, and other specifications.

PX Series Y-Type Threaded Tee

PX Series Y-Type Threaded Tee

PA69 Series End-of-Line Automatic Drain

PA69 Series End-of-Line Automatic Drain

Commonly used to automatically remove accumulated water from low points in pipelines, refrigerated air dryers, oil-water separators, air tanks, and the bottoms of various air filters. It can be installed where manual drainage is inconvenient, such as in high, low, or confined spaces, particularly where air consumption is high and frequent draining is required. Features include a highly reliable forced-discharge system, automatic drainage, and a metal protective guard for the bowl. It must be installed vertically with the drain port facing downward.

DSP-5 Series Digital Pressure Gauge

DSP-5 Series Digital Pressure Gauge

PV Series Elbow

PKG Series Five-Way Reducing Fitting

PKG Series Five-Way Reducing Fitting

PZA Series Cross Fitting

PZA Series Cross Fitting

PG Series Threaded Straight Reducer

PG Series Threaded Straight Reducer

DSP-2 Series Digital Pressure Gauge

DSP-2 Series Digital Pressure Gauge

PKB Series Five-Way Reducing Threaded Fitting

PKB Series Five-Way Reducing Threaded Fitting

DSP-3 Series Digital Pressure Gauge

DSP-3 Series Digital Pressure Gauge

PW Series Y-Type Reducing Tee

PW Series Y-Type Reducing Tee

39 Series Pressure Regulator

39 Series Pressure Regulator

The adjustment knob is lockable. Turn it to the desired pressure, then push it back into the locked position to prevent the setting from changing. Turn the knob clockwise to increase pressure and counterclockwise to decrease it. Check the supply capacity before adjusting the pressure.

PEG Series Reducing Tee

PEG Series Reducing Tee

IR Series Precision Regulators

IR Series Precision Regulators

The IR Series is a compact, lightweight pilot-operated precision regulator for pneumatic circuits requiring high pressure stability. It is available in three body sizes: IR1000, IR2000, and IR3000. The IR1000 and IR2000 series offer pressure setting ranges of 0.005~0.2MPa, 0.01~0.4MPa, and 0.01~0.8MPa; the IR3000 series offers 0.01~0.2MPa, 0.01~0.4MPa, and 0.01~0.8MPa. The pressure adjustment handwheel thread pitch has been reduced from the conventional 0.75mm to 0.5mm for more precise pressure setting. Repeatability is within ±0.5% of full scale, pressure gauge accuracy is within 0.2% of full scale, and air consumption is low. The series can be mounted independently with a bracket or connected directly to AF or AFM modular filter assemblies. The standard type also supports panel mounting. The pilot exhaust port is separate from the main exhaust port, and a special cleanroom specification is available. The IR3000 provides higher output and relief flow rates than the IR2000. The port size is Rc1/8, the maximum operating pressure is 1.0MPa, and the ambient and fluid temperature is -5~60

HAD402 Series Automatic Drain

HAD402 Series Automatic Drain

When installing the drain hose, use a hose with an inner diameter of at least Φ10 mm and a length no greater than 5 m. Do not allow the hose to bend upward. The compressor power must be greater than 3.7 kW.

FRC Series Two-Piece Air Preparation Units

FRC Series Two-Piece Air Preparation Units

The working medium is compressed air. The unit may be pipe-mounted or bracket-mounted and must be installed vertically within ±5°.

PD Series Threaded Side Tee

PD Series Threaded Side Tee

UFRL Series Three-Piece FRL Units

UFRL Series Three-Piece FRL Units

AC Series Air Filter Combination Unit

AC Series Air Filter Combination Unit

The AC Series Air Filter Combination Unit integrates a filter, pressure regulator, and lubricator to filter, regulate the pressure of, and lubricate compressed air. Proof pressure: 1.5 MPa; maximum operating pressure: 1.0 MPa; ambient and fluid temperature: 5–60°C. Filtration rating: 25 μm (5 μm and 50 μm options available). Pressure regulation range: 0.05–0.7 MPa for AC1000 and 0.05–0.85 MPa for AC2000–5000. Features a relieving-type valve. Available with a range of port sizes (M5, 1/8, 1/4, 3/8, 3/4, and 1), with Rc and NPT threads available as options. Rated flow ranges from 90 to 5,000 L/min. The bowl is made of polycarbonate; models AC2500 and above include a protective guard.

AC Series Pneumatic FRL Units

AC Series Pneumatic FRL Units

AC Series pneumatic FRL units combine a filter, pressure regulator, and lubricator to filter, regulate, and lubricate compressed air. The maximum operating pressure is 1.0 MPa, and the guaranteed withstand pressure is 1.5 MPa. The ambient and fluid temperature range is 5–60°C. The standard filtration rating is 25 μm, with 5 μm and 50 μm options available. The pressure adjustment range is 0.05–0.7 MPa for the AC1010 and 0.05–0.85 MPa for other models. The bowl is made of polycarbonate. A protective cover is not included on AC1010–2010 models, but is included on AC3010–5010 models. Port sizes include M5, 1/8, 1/4, 3/8, 1/2, 3/4, and 1 inch. Rated flow ranges from 90 to 4,000 L/min, and weight ranges from 0.22 to 3.20 kg. Brackets and pressure gauges are available in various specifications. These products are widely used as air preparation units in automation equipment and pneumatic systems.

AF Series Air Filter

AF Series Air Filter

AF series air filters are commonly used filtration components in pneumatic systems. They remove moisture, oil, and solid particles from compressed air to ensure the proper operation of downstream equipment. These filters have a guaranteed proof pressure of 1.5 MPa and a maximum operating pressure of 1.0 MPa. The operating ambient and fluid temperature range is 5–60°C. Standard filtration rating is 25 μm, with 5 μm and 50 μm filter element options available to meet different cleanliness requirements. The bowl is made of polycarbonate, offering high transparency and good mechanical strength. Models AF1000–2000 have no protective guard, while models AF3000–5000 are equipped with one for added safety. Port connections are available with Rc or NPT threads to meet a variety of connection requirements. The series includes multiple models with a wide range of port sizes, from M5 to G1. Rated flow varies by model, making the series suitable for a range of industrial pneumatic systems.

AR Series Pressure Regulators

AR Series Pressure Regulators

AR Series pressure regulators are relieving-type regulators with a guaranteed withstand pressure of 1.5 MPa and a maximum operating pressure of 1.0 MPa. The pressure adjustment range is 0.05–0.85 MPa, depending on the model, and the ambient and fluid temperature range is 5–60°C. Multiple port sizes are available, including M5, G1/8, and G1/4. Rated flow ranges from 100 to 8,000 L/min, and weight ranges from 0.08 to 1.19 kg. These regulators control pressure in pneumatic systems to ensure stable operation of downstream equipment.

AL Series Oil Mist Lubricator

AL Series Oil Mist Lubricator

The AL Series Oil Mist Lubricator is an air preparation component for pneumatic systems that atomizes lubricating oil and supplies it to pneumatic equipment. The series is rated for a pressure resistance of 1.5 MPa, with a maximum operating pressure of 1.0 MPa and an ambient temperature range of 5–60°C. Turbine oil No. 1, ISO VG 32, is recommended. The bowl is made of polycarbonate. Available models include AL1000-M5, AL2000-01/02, AL3000-02/03, AL4000-03/04/06, and AL5000-06/10. Depending on the model, the minimum oil drip rate ranges from 4 to 190 drops per minute, rated flow from 95 to 7,000 L/min, port size from M5 to 1 inch, bowl capacity from 7 to 130 cc, and weight from 0.07 to 1.08 kg. Accessories include B240, B340, B440, B540, and B640. Protective covers: not included with AC1000–2000; included with AC3000–5000. RC and NPT threads are also available for the ports.

AW Series Air Filter-Regulators

AW Series Air Filter-Regulators

AW Series air filter-regulators combine filtration and pressure regulation in one unit, making them suitable for air purification and pressure adjustment at the inlet of pneumatic systems. They feature a polycarbonate bowl and a filtration rating of 25 μm (5 μm and 50 μm options available). Pressure adjustment range: 0.05–0.7 MPa for the AC1000 model and 0.05–0.85 MPa for other models. Maximum operating pressure: 1.0 MPa; proof pressure: 1.5 MPa. Ambient and fluid temperature: 5–60°C. The valve is the relieving type. Manual and automatic drain options are available. Models range from AW1000 to AW5000, with port sizes from M5 to 1 inch to suit different flow requirements. Widely used in automation equipment, pneumatic tools, and other applications.

MAR Series Precision Pressure Regulator

MAR Series Precision Pressure Regulator

The MAR series precision pressure regulator provides precise pressure reduction and regulation of compressed air in pneumatic systems. The standard pressure adjustment range is 0.05~0.85MPa. Four low-pressure versions, 1K, 2K, 3K and 4K, offer ranges of 0.05~0.1MPa, 0.05~0.2MPa, 0.05~0.3MPa and 0.05~0.4MPa, respectively. The specification code includes sections for the model, port/thread and options. Confirm specific combinations against the complete coding rules. It is suitable for pneumatic control circuits requiring highly stable output pressure.

Festo-Type Air Preparation Units (OU/OFR/OL Series)

Festo-Type Air Preparation Units (OU/OFR/OL Series)

The Festo-type air preparation range includes OU two-piece units, OFR filter regulators, OU pressure regulators and OL lubricators, with a maximum operating pressure of 1.6MPa. Available in MINI, MIDI and MAXI sizes, with port threads of 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″, these products provide compressed air filtration, pressure reduction, pressure regulation and oil-mist lubrication. Bowl and exterior colors include orange, blue and green. They are commonly combined in air preparation units for automated equipment or used as maintenance replacements.

OU Series Two-Piece Air Preparation Units

OU Series Two-Piece Air Preparation Units

OU Series two-piece air preparation units are Festo-type units combining a filter regulator and a lubricator. They filter compressed air, reduce and regulate pressure, and provide oil mist lubrication, with a maximum operating pressure of 1.6MPa. The series is available in three sizes: MINI (miniature), MIDI (medium), and MAXI (large). Six port thread sizes are offered: 1/8", 1/4", 3/8", 1/2", 3/4", and 1", accommodating air systems with different pipe diameters. Matching components include the OFR filter regulator (filtration + pressure regulation) and the OL lubricator, which can be used separately or combined as a two-piece unit. Bowl colors are available in orange, blue, and green to distinguish functional sections or identify piping. Install in the sequence air inlet → filtration and pressure regulation → oil mist lubrication. These units are widely used for upstream air preparation in pneumatic systems for automation equipment, packaging machinery, and assembly lines.

OFR Series Filter Regulator

OFR Series Filter Regulator

The OFR series filter regulator is a FESTO-type air preparation component that serves as the filter and pressure regulator unit in two-piece or three-piece air preparation assemblies. It filters compressed air and regulates pressure in compressed air lines. The maximum operating pressure is 1.6MPa, and six port thread sizes are available: 1/8", 1/4", 3/8", 1/2", 3/4", and 1". Body sizes include MINI (miniature), and the unit can be combined with OU pressure regulators and OL lubricators from the same series to form two-piece or three-piece assemblies. Bowl colors are available in orange, blue, and green for easy line identification and coordinated appearance. It is suitable for air purification and pressure stabilization in automated equipment, pneumatic fixtures, packaging machinery, and other applications.

OL Series Air Lubricators

OL Series Air Lubricators

OL series air lubricators are Festo-type air preparation components with a maximum working pressure of 1.6MPa. They introduce lubricating oil mist into compressed air to lubricate actuators such as cylinders, air motors, and pneumatic tools. Three housing sizes are available based on flow capacity and port specifications: MINI (miniature), MIDI (medium), and MAXI (large). Six port thread sizes are available: 1/8", 1/4", 3/8", 1/2", 3/4", and 1". They can be combined with OU two-piece units, OFR filter regulators, and OU pressure regulators from the same series to form a complete air preparation unit. Housings are available in orange, blue, or green to suit color-coding requirements. To select a model, first choose the size (MINI/MIDI/MAXI) based on system flow and pipe diameter, then specify the port thread size and housing color.

SMC Series Air Preparation Units

SMC Series Air Preparation Units

SMC series air preparation units (maximum operating pressure 1MPa) provide compressed air filtration, pressure regulation, oil mist lubrication, and combined air preparation. They are commonly installed upstream in pneumatic circuits on automated equipment. The series includes AC three-piece and two-piece units, AW filter regulators, AF air filters, AL lubricators, AR pressure regulators, and combination units and components such as BC, BFC, BF, BL, and AFR. Port sizes include 1/8", 1/4", 3/8", 1/2", 3/4", 1", G1/4, G3/8, and G1/2. Their modular design allows components to be combined and installed to meet filtration, pressure regulation, and lubrication requirements.

AR Series Pressure Regulators

AR Series Pressure Regulators

AR series pressure regulators are pneumatic air preparation components used to reduce and stabilize pressure in compressed air lines. An adjustment mechanism sets the outlet pressure, providing stable operating pressure to downstream pneumatic actuators. The catalog page covers models including AR10-A, AR20-B, and AR30, with segments such as AR30-□, 03, B, E, -□, and B indicating selection details such as port size, pressure range, thread type, and mounting accessories. They are commonly used upstream of cylinders, pneumatic clamps, air blow-off devices, and control valves. When selecting a model, confirm the port size, pressure setting range, thread specification, accessories, and mounting method. Because the OCR information from the page is limited, refer to the complete catalog for specific pressure ratings and flow parameters.

AC Series Filter Regulator and Lubricator Units

AC Series Filter Regulator and Lubricator Units

AC series units combine a filter regulator and a lubricator to clean, regulate and lubricate the air supply in pneumatic systems. They are commonly used as air preparation units in factory automation circuits. The series includes models such as AC10A-A and AC20A-B to meet different flow and port requirements, and can be used with other air preparation components on this page, including AR regulators and AW filter regulators. When selecting a unit, consider port size, pressure adjustment range, filtration rating, drain type and mounting accessories.

AW Series Filter Regulators

AW Series Filter Regulators

The AW series filter regulator combines an air filter and a pressure regulator in a single air preparation unit. It removes moisture, oil mist, and solid contaminants from compressed air while providing continuously adjustable, stable downstream pressure. Common models include the AW20-B and AW60-B. The series is typically part of an air preparation product line that also includes AR series pressure regulators and AC series two-piece combinations. When selecting a model, consider the port thread, filtration rating, maximum operating pressure, pressure adjustment range, and drain type. These units are suitable for upstream air preparation in pneumatic control circuits serving cylinders, pneumatic valves, and pneumatic tools.

AC Series FRL Unit

AC Series FRL Unit

The AC Series FRL unit combines a filter, regulator, and lubricator to clean, regulate the pressure of, and lubricate compressed air. The catalog provides the model code example AC30C-□03DE-□-□B, with sections for the series, size, port size, drain type, accessories, and mounting configuration. The port size table lists codes 01~10 and 20~60, corresponding to pipe connection sizes from 1/8" to 1 1/2". Select the appropriate combination based on actual flow rate, pipe size, and accessory requirements. For options not detailed on this page, refer to the manufacturer's selection guide.

AL Series Lubricators

AL Series Lubricators

AL series lubricators are air preparation components that atomize lubricating oil and introduce it into compressed air to lubricate downstream actuators, such as cylinders and pneumatic motors, reducing wear. They are available in five series sizes based on body bore: 1000, 2000, 3000, 4000, and 5000. Port sizes include M5, 1/4″, 3/8″, 1/2″, 3/4″, and 1″, accommodating piping needs from miniature pneumatic circuits to medium- and high-flow applications. The model code consists of “AL + series code + port size.” When selecting a model, first choose the 1000~5000 series based on the required flow rate and installation space, then select the port size code according to the female pipe thread. Lubricators are commonly combined with filters and pressure regulators as air preparation units, but can also be installed individually upstream of the point of use.

AC Series Air Preparation Units

AC Series Air Preparation Units

AC series air preparation units (F.R.L. units) combine an air filter, pressure regulator and lubricator to filter, regulate and lubricate compressed air at the inlet of a pneumatic system. The series offers differential-pressure, manual and automatic drain options, with filtration ratings of 40μm or 5μm, optional pressure gauges in MPa or psi, and PT port threads. Common sizes include the 1000, 1500, 2000, 3000, 4000 and 5000 series, with port sizes of M5, 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″. Automatic-drain models can use the simplified code AC-[series]-[port size]-D.

BC Series Air Preparation FRL Units

BC Series Air Preparation FRL Units

The BC Series air preparation unit (F.R.L. Filter, Regulator, Lubricator Combination) is a B Series compressed-air filtration and pressure regulation assembly consisting of a filter with a pressure regulator connected in series with a lubricator. It removes water and dust, regulates pressure, and provides lubrication in pneumatic systems. It is widely used at the air inlets of automated production lines, machine tools, packaging equipment, and assembly equipment. The series is available in four port sizes: 1500 (1/8"), 2000 (1/4"), 3000 (3/8"), and 4000 (1/2"), with dimensions corresponding to the equivalent A Series (AC) sizes. Three drain types are available: differential-pressure drain (blank code), manual drain (M), and automatic drain (A). Pressure gauge options are with gauge (blank, with a 1 MPa or psi dual-scale gauge) or without gauge (N). Filtration ratings are 40μm (blank) and 5μm (W). The default thread type is PT. The entire series is ordered using a seven-part code: series code + port size + drain type + pressure gauge code + gauge pressure unit + filtration rating + thread type code.

AFC/BFC Series Two-Unit Air Preparation Assemblies

AFC/BFC Series Two-Unit Air Preparation Assemblies

AFC/BFC series two-unit assemblies are air preparation components for pneumatic systems. They combine a filter and a pressure regulator to filter and purify compressed air and maintain a stable pressure; some models can also be fitted with a lubricator. AFC denotes the A series, while BFC denotes the B series. Port sizes range from 1/8″ to 1/2″, corresponding to the 1500, 2000, 3000, and 4000 series. Drain options are differential-pressure drain (blank), manual drain (M), and automatic drain (A). Pressure gauge options are with gauge (blank), without gauge (N), MPa (1), or psi (2). Filtration ratings are 40μm (blank) or 5μm (W). Thread options include PT thread (blank). These products are widely used in automated equipment, pneumatic control circuits, and other applications.

BFC Series Two-Piece Air Preparation Unit

BFC Series Two-Piece Air Preparation Unit

The BFC series two-piece air preparation unit combines a filter and a pressure regulator to filter compressed air, maintain stable pressure, and separate oil and water. It is widely used in automated equipment, pneumatic production lines, and similar applications. Port sizes of 1/8″, 1/4″, 3/8″, and 1/2″ correspond to sizes 1500, 2000, 3000, and 4000, respectively. Drain options are differential pressure drain (blank), manual drain (M), and automatic drain (A). The pressure gauge can be included (blank) or omitted (N), with gauge units selectable as MPa (1) or psi (2). Standard filtration is 40μm (blank), with 5μm (W) available as an option. The default thread type is PT. Construct the model number in the following order: series code + port size + drain type + pressure gauge code + pressure gauge unit + filtration rating + thread type code.

AFR/BFR Series Filter Regulators

AFR/BFR Series Filter Regulators

AFR/BFR series filter regulators filter compressed air and reduce and stabilize pressure in pneumatic systems, combining moisture separation, filtration and pressure regulation in one unit. Port sizes include 1/8″, 1/4″, 3/8″ and 1/2″, corresponding to sizes 1500, 2000, 3000 and 4000. Drain options include differential-pressure, manual and automatic drainage. Filtration ratings are 40μm and 5μm. Units are available with or without a pressure gauge, with gauge ranges including 1 MPa and 2 psi. The default thread type is PT. The model code consists of the series designation, port size, drain type, pressure gauge code, gauge range, filtration rating and thread type code, making it easy to select a model for the system's requirements.