Automatic Drain

PA69 Series End-of-Line Automatic Drain
Commonly used to automatically remove accumulated water from low points in pipelines, refrigerated air dryers, oil-water separators, air tanks, and the bottoms of various air filters. It can be installed where manual drainage is inconvenient, such as in high, low, or confined spaces, particularly where air consumption is high and frequent draining is required. Features include a highly reliable forced-discharge system, automatic drainage, and a metal protective guard for the bowl. It must be installed vertically with the drain port facing downward.

HAD Series Automatic Drains
The HAD series consists of float-operated automatic drains that discharge condensate from compressed air systems, including air compressors, air receivers and filters. When the bowl is not pressurized, the float drops under its own weight, the valve closes the chamber opening, and the spring pushes the piston down, allowing condensate to flow out through the drain passage. When the pressure in the bowl exceeds 1kgf/cm², the piston moves upward against the spring, closing the drain passage and isolating the bowl from the outside. Once condensate reaches a certain level, buoyancy raises the float, opening the inner chamber port and allowing pressure into the chamber. Pressure and the spring then push the piston down, discharging condensate through the drain tube. Specifications include a proof pressure of 1.0~1.5MPa, a maximum operating pressure of 1.0MPa, an operating pressure range of 0.15~1.0MPa, ambient and fluid temperatures of 5~60℃, a 1/2 inlet port, a 3/8 or 1/2 drain port, and a weight of 0.62~0.91kg. The HAD400-04 includes a manual switch. The body is die-cast aluminum and the seals are NBR. For installation, use a drain tube with an inside diameter of at least Φ10mm and a length no greater than 5m; it must not bend upward. The compressor power rating must be greater than 3.7kW.