Model · HAD Series Automatic Drains

HAD Series Automatic Drains

The HAD series consists of float-operated automatic drains that discharge condensate from compressed air systems, including air compressors, air receivers and filters. When the bowl is not pressurized, the float drops under its own weight, the valve closes the chamber opening, and the spring pushes the piston down, allowing condensate to flow out through the drain passage. When the pressure in the bowl exceeds 1kgf/cm², the piston moves upward against the spring, closing the drain passage and isolating the bowl from the outside. Once condensate reaches a certain level, buoyancy raises the float, opening the inner chamber port and allowing pressure into the chamber. Pressure and the spring then push the piston down, discharging condensate through the drain tube. Specifications include a proof pressure of 1.0~1.5MPa, a maximum operating pressure of 1.0MPa, an operating pressure range of 0.15~1.0MPa, ambient and fluid temperatures of 5~60℃, a 1/2 inlet port, a 3/8 or 1/2 drain port, and a weight of 0.62~0.91kg. The HAD400-04 includes a manual switch. The body is die-cast aluminum and the seals are NBR. For installation, use a drain tube with an inside diameter of at least Φ10mm and a length no greater than 5m; it must not bend upward. The compressor power rating must be greater than 3.7kW.

Overview

The HAD series consists of float-operated automatic drains that discharge condensate from compressed air systems, including air compressors, air receivers and filters. When the bowl is not pressurized, the float drops under its own weight, the valve closes the chamber opening, and the spring pushes the piston down, allowing condensate to flow out through the drain passage. When the pressure in the bowl exceeds 1kgf/cm², the piston moves upward against the spring, closing the drain passage and isolating the bowl from the outside. Once condensate reaches a certain level, buoyancy raises the float, opening the inner chamber port and allowing pressure into the chamber. Pressure and the spring then push the piston down, discharging condensate through the drain tube. Specifications include a proof pressure of 1.0~1.5MPa, a maximum operating pressure of 1.0MPa, an operating pressure range of 0.15~1.0MPa, ambient and fluid temperatures of 5~60℃, a 1/2 inlet port, a 3/8 or 1/2 drain port, and a weight of 0.62~0.91kg. The HAD400-04 includes a manual switch. The body is die-cast aluminum and the seals are NBR. For installation, use a drain tube with an inside diameter of at least Φ10mm and a length no greater than 5m; it must not bend upward. The compressor power rating must be greater than 3.7kW.

Product category: Pneumatic components/Air preparation components/Automatic drains

HAD Series Automatic Drains — Dimension drawing
HAD Series Automatic Drains — Selection specifications
HAD Series Automatic Drains — Selection specifications
HAD Series Automatic Drains — Selection specifications
HAD Series Automatic Drains — Selection specifications

Models & specifications

Model / NameBody materialDrain port sizeInlet port sizeManual switchMaximum operating pressure (MPa)Operating pressure range (MPa)Proof pressure (MPa)Temperature range (°C)Weight (kg)
HAD402-04 Automatic drain HAD402-04压铸铝3/81/2false10.15-1.01.55-600.62
HAD400-04 Automatic drain HAD400-04压铸铝1/21/2true0.3-1.00.3-1.015-600.91
HAD402-04-2 Automatic drain HAD402-04-2 (semi-standard specification)压铸铝3/81/2false10.15-1.01.55-600.62

Dimensions & drawings

HAD Series Automatic Drains — Dimension drawing
HAD Series Automatic Drains — Dimension drawing

Original catalogs

HAD Series Automatic Drains — Catalog page
HAD Series Automatic Drains — Catalog page