Air Lubricators

396 Series Lubricators

396 Series Lubricators

The 396 series lubricator is a pneumatic air preparation component that atomizes lubricating oil and carries it with compressed air to downstream pneumatic equipment to lubricate moving parts. The series is available in six port sizes: 6, 8, 10, 15, 20, and 25 mm, with corresponding G1/8, G1/4, G3/8, G1/2, G3/4, and G1 connection threads. Bowl capacities are 40, 120, and 300 cm³, the maximum operating pressure is 1.0 MPa, and the ambient and medium temperature range is 0~+50℃. Before installation, blow the piping clean with air. Pipe fittings and vertical installation are recommended to ensure a stable oil mist output.

39 Series Pressure Regulator

39 Series Pressure Regulator

The adjustment knob is lockable. Turn it to the desired pressure, then push it back into the locked position to prevent the setting from changing. Turn the knob clockwise to increase pressure and counterclockwise to decrease it. Check the supply capacity before adjusting the pressure.

OL Series Air Lubricators

OL Series Air Lubricators

OL series air lubricators are Festo-type air preparation components with a maximum working pressure of 1.6MPa. They introduce lubricating oil mist into compressed air to lubricate actuators such as cylinders, air motors, and pneumatic tools. Three housing sizes are available based on flow capacity and port specifications: MINI (miniature), MIDI (medium), and MAXI (large). Six port thread sizes are available: 1/8", 1/4", 3/8", 1/2", 3/4", and 1". They can be combined with OU two-piece units, OFR filter regulators, and OU pressure regulators from the same series to form a complete air preparation unit. Housings are available in orange, blue, or green to suit color-coding requirements. To select a model, first choose the size (MINI/MIDI/MAXI) based on system flow and pipe diameter, then specify the port thread size and housing color.

AL Series Lubricators

AL Series Lubricators

AL series lubricators are air preparation components that atomize lubricating oil and introduce it into compressed air to lubricate downstream actuators, such as cylinders and pneumatic motors, reducing wear. They are available in five series sizes based on body bore: 1000, 2000, 3000, 4000, and 5000. Port sizes include M5, 1/4″, 3/8″, 1/2″, 3/4″, and 1″, accommodating piping needs from miniature pneumatic circuits to medium- and high-flow applications. The model code consists of “AL + series code + port size.” When selecting a model, first choose the 1000~5000 series based on the required flow rate and installation space, then select the port size code according to the female pipe thread. Lubricators are commonly combined with filters and pressure regulators as air preparation units, but can also be installed individually upstream of the point of use.

AL/BL Series Air Lubricators

AL/BL Series Air Lubricators

AL/BL series air lubricators add an oil mist to compressed air in pneumatic systems, supplying small amounts of lubricating oil to components such as cylinders and solenoid valves to reduce wear on moving parts. The series includes the AL standard type (0.9MPa) and the BL low-pressure type (0.4MPa), which can be selected according to the air supply pressure. Model numbers combine the series code, port size, thread type, pressure gauge scale, and other designation fields. Thread options are blank for PT thread, G for 3 thread, and T for NPT thread; pressure gauge scales are available in MPa or kgf/cm² & psi. These lubricators are commonly combined with a filter and pressure regulator to form an air preparation unit, installed downstream of the air compressor and upstream of the operating components.

SL Series Lubricators

SL Series Lubricators

SL series lubricators are lubrication components used in pneumatic air preparation assemblies (filter-regulator-lubricator or filter-lubricator units). They atomize lubricating oil and introduce it into the compressed air to lubricate downstream components such as cylinders, pneumatic motors and air valves, reducing friction and wear and extending service life. Their modular design allows them to be combined with filters, pressure regulators and other components. The model code consists of the series designation SL and a two- or three-digit port size code: 200 corresponds to 1/4", 300 to 3/8", and 400 to 1/2", covering low- to medium-flow air lines. Select the port size based on the pipe fitting threads and required flow rate, and pay attention to the lubricator's installation orientation and oil level in the bowl.

AL Series Lubricators

AL Series Lubricators

The AL series lubricator is the lubrication component of the AC series three-piece air preparation unit. It atomizes lubricating oil into compressed air to lubricate downstream pneumatic components such as cylinders and pneumatic valves. It can be combined with AF series filters and AR series regulators, and is available in AL1000, AL2000, AL3000, AL4000, and AL5000 sizes. The listed air preparation specifications include a proof pressure of 1.5MPa, a maximum operating pressure of 1.0MPa, an ambient and fluid temperature range of 5-60℃, recommended No. 1 turbine oil ISO VG32, and a polycarbonate bowl. AC2000 has no bowl guard, while AC3000-5000 have bowl guards. The regulator pressure range is 0.05-0.85MPa, and the regulator is a relieving type. The 25μm filtration rating applies to the filter, with 5 and 50μm options also available.

AL Series Air Lubricators

AL Series Air Lubricators

The AL series air lubricator uses the Venturi principle to atomize lubricating oil and mix it with compressed air, lubricating downstream pneumatic components such as cylinders and air motors. Proof pressure is 1.5MPa (15kgf/cm²), maximum operating pressure is 1.0MPa (10kgf/cm²), and ambient and fluid temperatures are 5~60℃. The recommended oil is No. 1 turbine oil ISOVG32, and the bowl is made of polycarbonate. The AL2000 has no bowl guard; the AL3000~5000 have bowl guards. Five sizes are available: AL1000, AL2000, AL3000, AL4000, and AL5000. Port sizes range from M5~1, rated flow from 95~7000 L/min, minimum flow for oil dripping from 4~190 L/min, bowl capacity from 7~130 cm³, and weight from 0.07~1.08 kg. Optional B240~B640 brackets are available (2 pieces). Flow rates in the table are measured at a supply pressure of 0.5MPa, an oil drip rate of 5 drops/minute, and an ISOVG32 oil temperature of 20℃. Rc and NPT port threads are also available.

AL Series Lubricators

AL Series Lubricators

AL series lubricators provide oil-mist lubrication in compressed air lines, atomizing No. 1 turbine oil (ISO VG32) and delivering it to downstream pneumatic components to reduce wear. They use polycarbonate bowls; AL3000~AL5000 models have protective covers, while AL2000 models do not. Proof pressure is 1.5MPa, maximum operating pressure is 1.0MPa, and ambient and fluid temperatures are 5~60℃. Port sizes range from M5 and 1/8~1 inch, with rated flow rates of 95~7000 L/min, minimum oil drip flow rates of 4~190 L/min, and bowl capacities of 7~130 cm³. Model numbers combine the AL body size and port code, as in AL2000-01 and AL5000-10. B240/B340/B440/B540/B640 brackets are available as options.

GL Series Lubricator

GL Series Lubricator

The GL series lubricator is an air preparation device that delivers small amounts of oil mist into compressed air to protect downstream pneumatic components such as cylinders and solenoid valves. Its rounded, sealed drip mechanism provides smooth, reliable oil-flow adjustment. The adjustment knob rotates one full turn, with oil flow varying approximately linearly across the scale, allowing the flow rate to be estimated from the setting. A specially designed drip nozzle creates negative pressure at the outlet, enabling oil delivery at low airflow rates. The large oil bowl can be refilled without shutting down the system, and the unit can be mounted using a bracket. The working medium is air, with an operating pressure range of 0.05~0.9MPa (7~130psi), a proof pressure of 1.5MPa (215psi), and an operating temperature of -20~70℃. Port sizes range from PT1/8~PT1. Oil bowl capacity is 25CC or 75CC, and weight is 130g or 360g. ISO VG32 or equivalent oil is recommended. The body is aluminum alloy; the GL600 oil bowl is aluminum alloy, while the bowls for other sizes are PC.

GL Series Lubricators

GL Series Lubricators

GL series lubricators are lubrication components for pneumatic air preparation systems. Used with GFC series filters, they provide a consistent oil mist to lubricate downstream pneumatic actuators. The catalog includes four size ranges: GL200, GL300, GL400, and GL600, with port sizes including PT1/8, PT1/4, PT3/8, PT1/2, PT3/4, and PT1 to meet the needs of air circuits with different flow rates. Each model corresponds to a GFC filter of the same size (for example, GL200-06 corresponds to GFC200-06), making it easy to assemble a matching air preparation unit. Select the appropriate size based on the air line connection, flow rate, and available installation space.

GC Series Air Lubricators

GC Series Air Lubricators

GC series air lubricators provide lubrication and air purification for pneumatic systems. The range comprises four sizes—GC200, GC300, GC400 and GC600—with port sizes from PT1/8 to PT1. The corrosion-resistant oil reservoir seal provides stable, reliable oil-feed adjustment. The oil-feed adjustment tube threads are standardized, and oil delivery follows an approximately linear scale, allowing the flow rate to be estimated from the setting. Oil can be added without shutting down the system. A special reservoir design creates negative pressure at the oil outlet and requires a low initial flow rate. Pressure regulation is stable and highly repeatable, while connections are quick and secure and installation is precise. Drain options include differential-pressure drain (blank), M manual drain and A automatic drain. The units also efficiently remove moisture and solid particles. The ordering code combines the series, port size, drain type, pressure gauge code, scale unit and oil filtration accuracy in sequence. Scale units are available in MPa, psi or bar.

LOE Series Lubricator

LOE Series Lubricator

The LOE series consists of automatic variable-restriction oil-mist lubricators for lubricating pneumatic components in compressed air lines. They are available in three sizes, MINI, MIDI and MAXI, according to port size and overall dimensions. The operating medium is compressed air, and the automatic variable-restriction design adjusts oil delivery according to flow. The units can be pipe-mounted or bracket-mounted and must be installed within ±5° of vertical. Maximum operating pressure is 16bar, operating temperature range is 0~60℃, and maximum oil/condensate capacity is 22ml. The minimum flow required for mist generation is approximately 3 l/min for MINI and 6 l/min for MAXI. Standard rated flows are 1300/2300/2700, depending on size. The body is die-cast aluminum; the oil bowl and sight glass are made of PC and fitted with an aluminum alloy protective guard. Seals are nitrile rubber. ISO VG 32 or equivalent lubricating oil is recommended. Port sizes include G1/8", G1/4", G3/8", G1/2", G3/4" and G1". Common models combine these port sizes with the MINI/MIDI/MAXI sizes.

QIU Series Air Lubricators

QIU Series Air Lubricators

QIU series air lubricators lubricate pneumatic systems by atomizing oil and delivering it to actuators with compressed air. The catalog covers QIU-8, QIU-10, QIU-15, QIU-20, QIU-25, QIU-35, QIU-40, and QIU-50 models. They operate at ambient temperatures of 5~60℃ with a nominal inlet pressure of 1.0MPa and can be refilled without shutting down. Connection sizes range from G1/4"~G1". The catalog also lists overall dimensions and pressure drop versus airflow data for each model (the minimum airflow for misting is approximately 75~850 L/min at an inlet pressure of 0.4MPa).