Pressure Regulators

ARM10 Series Miniature Standalone Pressure Regulators
The ARM10 series miniature standalone pressure regulator is a compact air pressure control component. Its small, lightweight standalone design allows it to be installed directly on piping or equipment in confined spaces. The series includes two types: the standard type (ARM10) and the front-handwheel type (ARM10F). The standard type has a simple design, while the front-handwheel type places the adjustment handwheel on the front for convenient pressure adjustment and monitoring from the front panel. Output pressure is adjusted using the handwheel, making the regulator suitable for secondary pressure control in pneumatic systems and providing a stable supply of operating pressure to cylinders and actuators. The ordering code combines the series designation, port size, IN/OUT fitting type, accessories, and other options, as in ARM10-06BG-Z-N. Users can select combinations based on port specifications, fitting type, and accessory requirements.

ARM10F Series Miniature Standalone Pressure Regulator (Front Handwheel Type)
The ARM10F series is a miniature standalone pressure regulator with a front handwheel and a compact, integrated design. The front handwheel makes it easy to set and adjust pressure after panel mounting. It is suitable for pneumatic circuits with limited space, instruments, and small automated equipment. This page also lists the standard ARM10 model; the ARM10F is its front-handwheel variant. When selecting a model, confirm the port specifications, IN/OUT fitting types, accessories, and complete ordering code. The scanned code table on this page contains duplicates and omissions; refer to the complete catalog or manufacturer's technical documentation for specific pressure, flow, port size, and other specifications.

IR Series Precision Regulators
The IR Series is a compact, lightweight pilot-operated precision regulator for pneumatic circuits requiring high pressure stability. It is available in three body sizes: IR1000, IR2000, and IR3000. The IR1000 and IR2000 series offer pressure setting ranges of 0.005~0.2MPa, 0.01~0.4MPa, and 0.01~0.8MPa; the IR3000 series offers 0.01~0.2MPa, 0.01~0.4MPa, and 0.01~0.8MPa. The pressure adjustment handwheel thread pitch has been reduced from the conventional 0.75mm to 0.5mm for more precise pressure setting. Repeatability is within ±0.5% of full scale, pressure gauge accuracy is within 0.2% of full scale, and air consumption is low. The series can be mounted independently with a bracket or connected directly to AF or AFM modular filter assemblies. The standard type also supports panel mounting. The pilot exhaust port is separate from the main exhaust port, and a special cleanroom specification is available. The IR3000 provides higher output and relief flow rates than the IR2000. The port size is Rc1/8, the maximum operating pressure is 1.0MPa, and the ambient and fluid temperature is -5~60

AR Series Pressure Regulators
AR series pressure regulators are pneumatic air preparation components used to reduce and stabilize pressure in compressed air lines. An adjustment mechanism sets the outlet pressure, providing stable operating pressure to downstream pneumatic actuators. The catalog page covers models including AR10-A, AR20-B, and AR30, with segments such as AR30-□, 03, B, E, -□, and B indicating selection details such as port size, pressure range, thread type, and mounting accessories. They are commonly used upstream of cylinders, pneumatic clamps, air blow-off devices, and control valves. When selecting a model, confirm the port size, pressure setting range, thread specification, accessories, and mounting method. Because the OCR information from the page is limited, refer to the complete catalog for specific pressure ratings and flow parameters.

AR/BR Series Pressure Regulators
AR/BR series pneumatic pressure regulators (pressure-reducing valves) reduce and stabilize compressed air pressure in air preparation systems, providing a stable working pressure for downstream pneumatic actuators and logic components. Models are available by port size: AR1500(1/8″), AR2000(1/4″), BR3000(3/8″), and BR4000(1/2″). Pressure ranges include the standard type (0.9MPa) and low-pressure type L (0.4MPa). Options include pressure gauge codes (blank = with gauge, N = without gauge), thread codes (blank = PT thread, G = G thread, T = NPT thread), bracket codes (blank = with bracket, J = without bracket), and gauge scale units (1 = MPa, 2 = psi, 3 = bar, 4 = kgf/cm² & psi). The die-cast aluminum alloy body features a pressure adjustment handwheel and a panel-mount design for easy installation and maintenance. The regulator can be combined with a filter and lubricator from the same series to form a three-piece air preparation unit.

GR Series Pressure Regulators
GR series pressure regulators, also known as pressure reducing valves, regulate air supply pressure in pneumatic systems. They reduce inlet pressure and stabilize it at a set value, providing constant operating pressure to downstream components such as cylinders and solenoid valves. The series comprises four sizes based on port diameter: GR200, GR300, GR400 and GR600. Four type codes are available: blank (standard type), L (low-pressure type), J (without bracket, standard configuration) and H (standard manual type). These options accommodate conventional pressure regulation, precise low-pressure regulation and different mounting methods. The catalog provides the ordering code example GR200 08 L □ F 1 G K, whose positions represent the series code, port size, type code and other options, such as accessories, threads, pressure gauge and exhaust method. Combine the appropriate options in each position to create the complete ordering code. During installation, ensure that the inlet and outlet directions match the arrow. Turn the adjustment knob clockwise to increase pressure and counterclockwise to decrease it; release pressure before adjustment. The J type does not include a bracket and can be connected directly to the piping. Select a configuration with a bracket if panel or bracket mounting is required.

AR Series Pressure Regulators
AR series pressure regulators are relieving-type pneumatic pressure control components designed to reduce compressed air pressure and maintain a stable output pressure in air preparation systems. The guaranteed proof pressure is 1.5MPa, the maximum operating pressure is 1.0MPa, and the pressure adjustment range is 0.05~0.85MPa (2000~5000 series). The ambient and fluid temperature range is 5~60℃. Models range from AR1000~AR5000, with port sizes of M5, 1/8, 1/4, 3/8, 1/2, 3/4 and 1, rated flow rates of 100~8000L/min, and weights of 0.08~1.19kg. The standard configuration includes brackets (2) and a pressure gauge, with gauge port sizes of 1/16~1/4. Rc and NPT port threads and filtration ratings of 5 and 50μm are also available.

IR Series Precision Pressure Regulators
IR series precision pressure regulators provide precise pressure reduction and stabilization of compressed air in pneumatic systems. They are compact and lightweight, with accurate pressure settings. The adjustment screw thread pitch has been reduced from the conventional 0.75mm to 0.5mm for finer adjustment. They can be mounted independently with a bracket or directly combined with AF and AFM modular filter units. The standard model supports panel mounting, and the pilot exhaust port is separate from the main exhaust port. Special-order models are available for use in clean environments. Compared with the conventional IR200 precision regulator, the IR3000 offers higher output and relief flow rates. Pressure setting ranges include 0.005-0.2MPa, 0.01-0.4MPa and 0.01-0.8MPa. Repeatability is within ±0.5% of full scale, ambient and fluid temperatures are -5~60℃ (no freezing), maximum operating pressure is 1.0MPa, and the pressure port size is Rc1/8. An air filter (AF) and an oil mist separator (AM, AFM) must be installed on the supply side.

GR Series Pressure Regulators
GR series pressure regulators regulate and stabilize pressure in pneumatic systems. An integrated square pressure gauge saves installation space, while an external round gauge is also available. A pressure-locking mechanism prevents external interference from affecting the set pressure, and a balanced regulating mechanism provides greater stability with minimal drift. The series includes GR200, GR300, GR400 and GR600 models, with port sizes from PT1/8 to PT1. The standard operating pressure range is 0.05~0.9MPa (20~130psi), the proof pressure is 1.5MPa (215psi), and the operating temperature range is -20~70℃. In addition to the standard version, options include the L low-pressure version, with or without a gauge, square or round gauges, different scale units and filtration ratings. Custom pressure specifications are also available (maximum adjustable pressure 0.4MPa).

GFR Series Pressure Regulator
The GFR series pressure regulator is the pressure control unit in the air preparation three-piece assembly (GFC filter + GFR pressure regulator + GL lubricator). It reliably reduces compressed air line pressure to a set value with good repeatability and can be quickly and securely assembled with GFC series filters and GL series lubricators of the same port size. The working medium is air. Port sizes include PT1/8, PT1/4, PT3/8, PT1/2, PT3/4 and PT1, across four sizes: 200/300/400/600 (port codes 06/08/10/15/20/25). Common parameters for the three-piece assembly are: operating pressure range approximately 0.15~0.9 MPa (automatic and differential-pressure drain types), operating temperature -20~70℃, filtration rating 40μm or 5μm, and ISO VG 32 or equivalent oil for filter element cleaning. Square or round gauges are available with scales in MPa, psi or bar. A reverse flow valve is also optional.

LR Series Pressure Regulators
The LR series pressure regulators are SNS Automation air preparation components designed to reduce and stabilize pressure in filtered compressed air lines, with or without lubrication. They are available in MINI, MIDI and MAXI sizes, with G1/8, G1/4, G3/8, G1/2, G3/4 and G1 ports. They support in-line, bracket or panel mounting in any orientation. Working pressure is 12bar, with an adjustment range of 1-16bar; the LR-...-7- model has a range of 0.5-7bar (the catalog also specifies 0.5-12bar/0.5-7bar). Operating temperature is 0-60℃. Body materials include plastic and die-cast aluminum, with nitrile rubber seals and a POM pressure adjustment knob. Diaphragm and piston designs are available, and OMA series pressure gauges can be fitted.

QTY Series Pressure Regulators
The QTY series consists of pressure regulators (pressure-reducing valves) for pneumatic systems. They reduce high supply pressure and stabilize it at a set value for downstream pneumatic circuits. The series includes 8 sizes (QTY-8 ~ QTY-50), with common port threads including G1/4", G3/8", G1/2", G3/4" and G1". The operating ambient temperature range is 5~60℃, nominal input pressure is 1.0MPa, maximum input pressure is 0.63MPa, and regulating range is 0.05~0.63MPa, allowing stable regulation at low pressures. Valve body outside diameters include Φ64, Φ104/Φ105 and Φ120/Φ130; overall length L ranges from 173mm to 280mm, and mounting height A is 80/108/130mm. The catalog also provides air flow data at an inlet pressure of 1MPa and an outlet pressure drop of 0.05MPa. Flow increases from 680L/min to 3200L/min as nominal bore size increases, helping users select a valve matched to the air consumption of downstream actuators.

VEX1133 Series High-Flow Precision Pressure Regulator
The VEX1133 series high-flow precision pressure regulator is designed for applications requiring a stable, high-flow air supply, such as spray painting and pneumatic control. Its pilot-operated design maintains stable outlet pressure even when inlet pressure fluctuates, providing precise pressure regulation, high flow capacity, and low pressure loss. The valve body has a pressure gauge port and a locking adjustment handwheel to prevent accidental changes to the set pressure. Thread types are Rc (no designation in the model number) and NPT (designated N). The port size is indicated by two digits, with 02 corresponding to 1/4″. A special specification suffix (such as X259) can be added to the end of the model number to meet custom piping connection requirements. When selecting a model, specify the base model VEX1133 + thread type and port size + special specification, in that order.