Pneumatic Slide Table

HLS Series Twin-Shaft Precision Slide Cylinder (Roller Type)

HLS Series Twin-Shaft Precision Slide Cylinder (Roller Type)

TN/TDA Series Twin-Rod Pneumatic Cylinders

TN/TDA Series Twin-Rod Pneumatic Cylinders

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)

The MXS series pneumatic slide table uses two cylinders arranged side by side and a crossed-roller guide for high rigidity and resistance to offset loads. It is suitable for factory automation applications requiring high-precision linear reciprocating motion while supporting an overhung load. Six standard bore sizes are available: MXS6, MXS8, MXS12, MXS16, MXS20, and MXS25, with bores of φ6×2, φ8×2, φ12×2, φ16×2, φ20×2, and φ25×2, respectively. The combined cross-sectional areas of the paired cylinders are equivalent to bores of φ8, φ11, φ17, φ22, φ28, and φ35, respectively. The slide table uses air as its working medium and operates in a double-acting configuration. Selection must be checked against the concentrated load W, overhang Ln, moment center position correction value An, operating and mounting factor K, and allowable concentrated load factor β. The maximum allowable concentrated loads for the respective sizes are 0.6, 1, 2, 4, 6, and 9 kg, each with its corresponding allowable moment. If these limits are exceeded, reduce the load or select a larger bore.

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)

The MXQ series twin-cylinder pneumatic slide table features a recirculating linear guide and a twin-cylinder (twin-rod) drive for high rigidity and resistance to off-center loads. It is suitable for automated precision positioning, transfer, and clamping applications. Bore sizes range from φ6×2 to φ25×2 (equivalent bore φ8~φ35), with six models: MXQ6, MXQ8, MXQ12, MXQ16, MXQ20, and MXQ25. The double-acting slide uses air as its working medium, with a maximum operating pressure of 0.7MPa and a minimum of 0.15MPa. Ambient and fluid temperatures range from -10~+60℃ (no freezing), and slide speed is 50~500mm/s (50~200mm/s with a metal stopper). Cushioning options include rubber cushioning (standard), a hydraulic shock absorber, or no cushioning (metal stopper). Stroke length tolerance is ±1mm; lubrication is not required. Port threads are M5×0.8 for MXQ6~MXQ20 and Rc1/8 for MXQ25.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

This side-rail precision slide table cylinder integrates a miniature recirculating ball linear guide with a pneumatic cylinder, providing excellent straightness and high anti-rotation accuracy for precision assembly applications. Bore sizes are 6/10/16/20 mm, with corresponding guide rail (linear bearing) widths of 5/7/9/12 mm. Standard strokes range from 5~60 mm (maximum 30 for bore size 6, 50 for bore size 10, and 60 for bore sizes 16 and 20). Contact the manufacturer for custom strokes. Minimum operating pressures are 0.15/0.06/0.05/0.1 MPa. The cylinder can be mounted from 4 directions and connected to piping from 3 directions. The slide table, body, piston and rear cover are alloy; the piston rod and guide rail are stainless steel; the balls are SUS304; and the seals are NBR. Stroke code S indicates a built-in magnet for use with a sensor switch.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

The HLH series side-rail precision slide table cylinder integrates a miniature recirculating-ball linear guide with a pneumatic cylinder, making it suitable for precision assembly, positioning, and short-stroke linear motion. It offers good straightness and anti-rotation accuracy. The cylinder body can be mounted from 4 directions, and piping can be connected from 3 directions. Bore sizes are 6, 10, 16, and 20 mm, with corresponding guide rail widths of 5, 7, 9, and 12 mm. Standard stroke ranges for the respective bore sizes are 5~30 mm, 5~50 mm, 5~60 mm, and 5~60 mm; strokes beyond the standard range can be custom ordered. The finished product order code consists of HLH, the bore size, the stroke, and the stroke code S (with magnet).

HLQ/HLQL Series Multi-Shaft Precision Slide Bushing Cylinder (Recirculating Ball)

HLQ/HLQL Series Multi-Shaft Precision Slide Bushing Cylinder (Recirculating Ball)

The HLQ/HLQL series comprises multi-shaft precision slide bushing cylinders with recirculating-ball linear guides. The integrated piston rod and guide shaft arrangement accommodates moderate off-center loads and torque, making the cylinders suitable for automated clamping, pressing, positioning and other applications requiring high-precision linear guidance. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm, all with a 10mm rail width. The operating medium is compressed air filtered through a 40μm or higher-grade filter. Operating pressure is 0.15~0.7MPa (approximately 1.5~7.0bar), proof pressure is 1.2MPa, operating temperature is -20~70℃, and operating speed is 50~500mm/s. Cushioning options include fixed front-end cushioning or hydraulic shock absorbers. Port threads are available in M5×0.8 and PT1/8, with G or NPT threads also optional. Major components include aluminum alloy mounting plates and slide bushings, medium-carbon steel or low-alloy steel hex socket ball-head screws, free-cutting steel floating joints, brass pistons and magnet holders, and NBR shaft and piston O-rings. The cylinders offer a compact design, high guiding accuracy and long service life.

HLS/HLSL Series Twin-Shaft Precision Slide Table Cylinder (Roller Type)

HLS/HLSL Series Twin-Shaft Precision Slide Table Cylinder (Roller Type)

The HLS/HLSL series twin-shaft precision slide table cylinder (roller type) features a twin-shaft guide structure and a roller-type linear guide mechanism, offering high rigidity, precise guidance and strong resistance to offset loads. It is suitable for precision positioning, handling, pushing and clamping in automated equipment. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm. The working medium is compressed air filtered to 40μm or better. The operating pressure range is 0.15~0.7MPa (22~100psi, 1.5~7.0bar), with a guaranteed pressure resistance of 1.2MPa (17psi, 12.0bar). The operating temperature is -20~70℃ and the operating speed range is 50~500mm/s. Accessories such as a retraction-end stroke adjustment screw assembly and a hydraulic shock absorber assembly can be added to limit the retraction stroke and absorb impact. Mounting methods and external dimensions vary by bore size, allowing interchangeability with standard cylinders.

MXS Series Pneumatic Slide

MXS Series Pneumatic Slide

The MXS Series pneumatic slide is a compact pneumatic actuator that integrates a double-acting cylinder with a linear guide. It is designed for applications requiring short strokes, high guide accuracy, and space-saving installation. The catalog lists a basic MXS12 bore and 50 mm stroke configuration, with model codes selected according to the stroke adjuster (AS front end, AT rear end, B belt end) and available options. The slide offers high rigidity and easy installation, making it suitable for automated fixtures, inspection, feeding, and other applications.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

The HLH series side-rail precision slide table cylinder is a pneumatic actuator that integrates a cylinder with a side-rail guide mechanism. It is suitable for automated applications requiring precise linear sliding, positioning, and short-stroke reciprocating motion. Its compact design and side-rail guide can accommodate moderate lateral loads, providing smooth movement and high repeat positioning accuracy. Common applications include fixtures, material handling, inspection, and small assembly equipment. Models are designated HLH-[bore]-[stroke]-[magnet]. For example, HLH 20 × 30 S indicates a 20 mm bore, a 30 mm stroke, and an included magnet. Available bore sizes include 6, 16, and 20 mm, and available strokes include 8 and 30 mm. A blank magnet code indicates no magnet, while S indicates an included magnet.

HLQ/HLQL Series Twin-Shaft Precision Slide Table Cylinders (Recirculating Ball)

HLQ/HLQL Series Twin-Shaft Precision Slide Table Cylinders (Recirculating Ball)

The HLQ/HLQL series consists of twin-shaft precision slide table cylinders with recirculating ball guides. They are suited to automated equipment requiring high-precision linear movement, positioning, transfer, and clamping support. The series includes HLQ and HLQL models, with selection based on bore size, stroke, magnet code, external stop type, and adjustment device. External stop options include no external stop (basic type), A compression springs at both ends, and B compression spring at the front end. PT or G threads are available for adjustment/thread options. The catalog does not specify the complete bore size and stroke ranges; contact us to confirm non-standard strokes and mounting accessories.

HLS/HLSL Series Twin-Shaft Precision Slide Cylinders (Roller Type)

HLS/HLSL Series Twin-Shaft Precision Slide Cylinders (Roller Type)

The HLS/HLSL series comprises twin-shaft precision slide cylinders with twin-shaft guides and roller slides, suited to automated applications requiring high rigidity, smooth linear motion, and precise positioning. The series includes the HLS standard type and HLSL symmetrical type, with bore sizes of 20, 30, 40, 50, 80, and 100 mm. When ordering, specify the bore size, stroke, magnet code, external stop type, adjustment device, and other options. The minimum stroke is 150 mm for bore sizes 20~32 and 200 mm for bore size 40. Mounting accessories, non-standard strokes, and other specifications are custom-made; contact us for a quote.

MXQ Series Pneumatic Slide Table

MXQ Series Pneumatic Slide Table

The MXQ series is a pneumatic slide table (slide table cylinder) with an integrated symmetrical guide rail and table structure, designed for precision linear transfer, positioning, and clamping. The model number consists of five parts: series, bore size, type, stroke, and adjustment device. Bore sizes are 6, 8, 10, 12, 16, 20, and 25 mm, with stroke options depending on the bore size (standard range: 10~200 mm). Types include the basic type and the L symmetrical type. Adjustment options include no adjustment device, front-end adjustment AS, rear-end adjustment AT, hydraulic shock absorbers at both ends B, rear-end hydraulic shock absorber BT, front-end metal stopper C, and various combinations such as F/FR/FP/P with spring cushions and end locks. These provide end-of-stroke stopping, cushioning, and position holding during power loss. The table can be mounted on multiple sides and is suitable for linear transfer mechanisms in automated equipment for electronics, automotive parts, packaging, and other applications.

MXQ6 Series Pneumatic Slide Table

MXQ6 Series Pneumatic Slide Table

The MXQ6 series pneumatic slide table, also known as a pneumatic slide sleeve, is a compact, short-stroke pneumatic actuator commonly used in automated equipment for linear handling, positioning, pushing, pressing, and transferring small workpieces. The series includes MXQ6-10, MXQ6-20, MXQ6-30, MXQ6-40, and MXQ6-50 models, covering strokes from 10~50 mm. The dimensional table provides key dimensions (mm), including F, N, G, H, NN, GA, HA, I, J, K, M, Z, and ZZ. When selecting a model, check the load W, the distance between the load and the slide table (overhang) L1, the moment center position correction value An, the load mounting coefficient K, the maximum allowable axial distance Ema(J), and the allowable moment coefficient γ to ensure operation within the permitted load and moment limits.