Dual-Cylinder Pneumatic Slide Table

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)
The MXS series pneumatic slide table uses two cylinders arranged side by side and a crossed-roller guide for high rigidity and resistance to offset loads. It is suitable for factory automation applications requiring high-precision linear reciprocating motion while supporting an overhung load. Six standard bore sizes are available: MXS6, MXS8, MXS12, MXS16, MXS20, and MXS25, with bores of φ6×2, φ8×2, φ12×2, φ16×2, φ20×2, and φ25×2, respectively. The combined cross-sectional areas of the paired cylinders are equivalent to bores of φ8, φ11, φ17, φ22, φ28, and φ35, respectively. The slide table uses air as its working medium and operates in a double-acting configuration. Selection must be checked against the concentrated load W, overhang Ln, moment center position correction value An, operating and mounting factor K, and allowable concentrated load factor β. The maximum allowable concentrated loads for the respective sizes are 0.6, 1, 2, 4, 6, and 9 kg, each with its corresponding allowable moment. If these limits are exceeded, reduce the load or select a larger bore.

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)
The MXQ series twin-cylinder pneumatic slide table features a recirculating linear guide and a twin-cylinder (twin-rod) drive for high rigidity and resistance to off-center loads. It is suitable for automated precision positioning, transfer, and clamping applications. Bore sizes range from φ6×2 to φ25×2 (equivalent bore φ8~φ35), with six models: MXQ6, MXQ8, MXQ12, MXQ16, MXQ20, and MXQ25. The double-acting slide uses air as its working medium, with a maximum operating pressure of 0.7MPa and a minimum of 0.15MPa. Ambient and fluid temperatures range from -10~+60℃ (no freezing), and slide speed is 50~500mm/s (50~200mm/s with a metal stopper). Cushioning options include rubber cushioning (standard), a hydraulic shock absorber, or no cushioning (metal stopper). Stroke length tolerance is ±1mm; lubrication is not required. Port threads are M5×0.8 for MXQ6~MXQ20 and Rc1/8 for MXQ25.