Rotary Clamping Cylinder

ACK Series Rotary Clamping Cylinder
The ACK Series Rotary Clamping Cylinder is available in bore sizes of 25, 32, 40, 50, and 63 mm. It offers two operating modes—a rotary stroke and a clamping stroke—with rotation angles of 90° and 180°, respectively. Choose between left- and right-hand rotation. The seal materials ensure reliable operation under various conditions, while the three-groove guide design provides high guiding precision. The piston rod is made of special alloy steel and heat-treated to extend its service life. Single-sided and double-sided (90°) operation are available. The finished-product ordering code consists of the rotation direction code, bore size, rotation angle code, thread type code, and other specifications.

QDK Series Flat Swing Clamp Cylinder
The QDK Series Flat Swing Clamp Cylinder is a double-acting cylinder that uses compressed air filtered through a 40 μm or finer filter. Its operating pressure range is 0.15–1.0 MPa (22–145 psi). The series is available in four bore sizes: 20 mm, 25 mm, 32 mm, and 40 mm, making it suitable for automated equipment requiring rotary clamping. The cylinder operates reliably and smoothly, and its compact design makes it ideal for industrial automation lines, fixtures, assembly tooling, and other applications.

QCK Series Rotary Clamping Cylinder
The QCK Series Rotary Clamping Cylinder combines rotary and clamping motions, making it suitable for workpiece clamping and rotary positioning on automated production lines. Available in eight bore sizes from 12 mm to 63 mm, it operates at pressures of 0.15–1.0 MPa, depending on the bore size, and uses compressed air as its working medium. Its compact design and reliable operation make it widely used in industrial automation, machining, assembly lines, and other applications.

HMC Series Rotary Clamping Cylinder
The HMC series is a pneumatic rotary clamping cylinder. Its piston first extends linearly, then rotates through a set angle in the specified direction to clamp the workpiece. When released, it rotates in the opposite direction to reset. It is suitable for welding fixtures, machining positioning, assembly tooling, and other applications requiring fast clamping and clearance. Key selection parameters include mounting/connection type (A: threaded holes at both ends; B: through-holes), bore size (12, 16, 20, 25, 32), stroke (10, 15, 50, etc.), rotation direction (R: clockwise; L: counterclockwise), and clamp arm type (blank: single-sided clamp arm; D: double-sided clamp arm). Accessory and magnetic sensor switch codes (such as Z and A93) can also be appended. Select the bore size based on the required clamping force, the stroke and rotation direction based on the clearance available around the workpiece, and the clamp arm and mounting type based on the fixture design.

HSC Series Rotary Clamping Cylinder
The HSC series rotary clamping cylinder is designed for automated fixtures that require rotation before clamping. The model code consists of the series designation HSC, rotation direction (L left/R right), bore size (25/32), stroke (e.g., 15), and clamp arm type (blank for single-sided/D for double-sided). Bore sizes are 25 and 32 mm, with a common stroke of 15 mm. Single-sided and double-sided clamp arms are available. The cylinder is commonly used in tooling fixtures, positioning and clamping applications, and assembly line jigs, using pneumatic power to rotate and clamp. When selecting a model, confirm the rotation direction, bore size, stroke, and clamp arm type to ensure compatibility with the available fixture space and required clamping force.

SRC Series Rotary Cylinders
SRC series rotary cylinders (rotary clamp cylinders) rotate and clamp workpieces downward. The model designation consists of the series code SRC, rotation direction, cylinder bore, cylinder stroke, and clamp type. Rotation direction is designated L for left or R for right. Cylinder bores are available in 12, 16, 20, 25, 32, 40, 50, and 63 mm (the catalog model table highlights 25/32/50/63). Stroke is specified as the downward clamping stroke. Clamp types are an unmarked single-sided clamp arm and a D double-sided clamp arm; the 25 bore is not available with a double-sided clamp arm. The catalog also lists the free supply method as M5×0.8. Parameters such as operating type, working fluid, pressure, temperature, and speed are not fully specified on the standard specifications page; consult the complete catalog when selecting a model.

MK Series Rotary Clamp Cylinder
The MK series rotary clamp cylinder is a pneumatic actuator that converts linear piston motion into rotary and clamping action. It is commonly used for rapid workpiece clamping and swing-away clearance at loading and unloading stations on machine tools, fixtures, and automated assembly lines. The ordering code is divided into “series—mounting bracket—bore—stroke—rotation direction—cylinder options”: the series is always MK; mounting options are standard (no symbol) or rodless-side flange type G; bore sizes range from Φ12~Φ63; the stroke is selected according to the bore; rotation is either right R or left L, allowing symmetrical layouts for mirrored stations. Cylinder and accessory options include standard female thread (no symbol), with cap N, with cap for specified bore ranges RC, NPT thread TN, and G thread TF. The cylinder is also available with a magnet S or without a magnet (blank); a magnetic switch can be used with the magnet-equipped version to detect the clamped position. The cylinder body is typically made of anodized aluminum alloy, the piston rod is hard chrome-plated, and the seals are wear-resistant for long-term operation in medium-frequency clamping applications. When selecting a model, confirm the bore, stroke, rotation direction, and mounting bracket type, and note the differences in the RC cap option between the Φ12~Φ25 and Φ32~Φ63 size ranges.

ZM3R Series Pneumatic Rotary Clamp
The ZM3R series consists of pneumatic rotary clamping actuators. Components include a bottom cover, O-rings, springs, a spacer, shaft, body, spring washer, push rod, bushing, spring seat, Phillips round-head screws, top cover, plain bearing sleeve, needle rollers, rocker arm, and hex socket bolts. Multiple O-ring seals and a spring-return mechanism are used, with the push rod driving the rocker arm to rotate before clamping. The series has an output force of 20N. The standard ZM3R06 is available with rotation angles of 20°, 30°, and 50°, while the ZM3R06-W variant offers 25°, 50°, and 75°. Select the model according to the space available at the workpiece clamping point and the required swing angle. Refer to the catalog dimensional drawings in millimeters for external dimensions. These clamps are suitable for automated fixtures, welding fixtures, assembly line stations, and other applications requiring the clamp to rotate out of the way before clamping. The ZM3P and JM322 products listed on the same page belong to other series and are not part of this series.