Guided Cylinder

MHZ2 Series Pneumatic Gripper

MHZ2 Series Pneumatic Gripper

MHZ2 Series Pneumatic Gripper; MHZ2 is a parallel-opening/closing type.

MHC2 Series Pneumatic Gripper

MHC2 Series Pneumatic Gripper

ACQ Series Ultra-Thin Cylinder with Guide Rod

ACQ Series Ultra-Thin Cylinder with Guide Rod

The ACQ Series ultra-thin cylinder with guide rod is available in 10 bore sizes from 12 mm to 100 mm (12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm). Its compact design makes it suitable for automation applications with limited space. The guide rod can withstand certain lateral loads, helping ensure smooth movement. It uses compressed air and offers low friction and a long service life. For technical details such as the operating mode and pressure range, please consult the full specifications.

MGG Series Compact Guided Cylinder

MGG Series Compact Guided Cylinder

The MGG series compact guided cylinder integrates a cylinder and guide mechanism into a compact pneumatic actuator. Two parallel guide rods work with a guide plate to provide resistance to twisting and offset loads while delivering linear thrust. Grippers, suction cups, press heads, and other end effectors can be mounted directly for precision guiding, positioning, press-fitting, and pick operations in automated equipment. Compared with a standard cylinder, it is shorter, more compact, and more rigid, can withstand a certain amount of lateral load, and offers consistent repeat positioning accuracy. The catalog gives MGG B 32×100 R as an example model code: MGG series, B construction type, 32mm bore, 100mm stroke, and R option. When selecting a model, users primarily specify the bore, which determines output thrust, and the stroke, which determines the operating range, then add suffixes for mounting and accessories such as magnetic switches. This series often appears in the same catalog as TDA and CXS dual-rod cylinders and STM slide table cylinders, offering an additional compact guided cylinder option.

STM Series Slide Table Cylinder

STM Series Slide Table Cylinder

The STM series slide table cylinder is a guided linear pneumatic actuator consisting of a cylinder body, two guide rods, and a sliding platform. The piston rod drives the platform in precise reciprocating motion along the guide rods. Workpieces, fixtures, or sensors can be mounted directly on the platform, which offers better resistance to torsion and off-center loads than a conventional single-rod cylinder. Common selection parameters include bore size (compact sizes such as 6, 10, 16, 20, 25, and 32), stroke (short strokes from a few millimeters up to around 100 mm), operation (single-acting spring return or double-acting), magnetic switches (available with a magnetic ring), and mounting style (basic, flange, etc.). This series is often considered alongside compact guided cylinders such as MGG and dual-rod cylinders such as TDA/CXS. It is widely used in automated electronic assembly, packaging, inspection, and fixture positioning equipment where compact size, short stroke, and smooth guided motion are required. This catalog page provides only the series name and product image; specific bore, stroke, magnet, and other specifications must be confirmed using the selection chart.

MXQ Series Pneumatic Slide Table

MXQ Series Pneumatic Slide Table

The MXQ series pneumatic slide table (recirculating linear guide/twin-cylinder type) is a pneumatic actuator designed for precise linear motion in automated equipment. Its recirculating linear guide and twin-cylinder drive provide high rigidity and guiding accuracy, allowing it to withstand moderate eccentric loads and moments while delivering smooth motion and repeatable positioning. The series is suitable for linear conveying, positioning, press-fitting, and transferring workpieces, and is commonly used with pneumatic components such as cylinder control valves and magnetic switches. When selecting a model, consider the bore size, stroke, mounting method, and load conditions to ensure that the slide operates within its permissible load range.

HMGG Series Guided Cylinders

HMGG Series Guided Cylinders

HMGG series guided cylinders use guide rods for pneumatic applications requiring resistance to off-center loads and precise linear guidance. Bearing options are M (plain bearing) or L (ball bearing), and mounting options are B (basic type) or F (front flange type). Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm, with stroke selected to suit the application. The model code consists of the series designation, bearing type, mounting type, bore size, and stroke, making it easy to select the right configuration for the operating conditions.

TACQ Series Ultra-Compact Guided Cylinder

TACQ Series Ultra-Compact Guided Cylinder

The TACQ series is a double-acting, ultra-compact cylinder with two guide rods. Its flat body and short axial length save space, while the guide rods also prevent rotation. When retracted, the cylinder mounting plate's rotation is limited to ±0.2° (12 and 16 bores) or ±0.1° (20 bore and above). The cylinder can directly withstand certain off-center loads and lateral moments, making it suitable for clamping, lifting and pushing applications where space is limited and resistance to rotation and off-center loads is required. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm. The cylinder is double-acting and uses air filtered through a 40μm or larger filter. Its operating pressure range is 0.15~1.0 MPa (22~145 psi), proof pressure is 1.5 MPa (215 psi), and recommended operating pressure is 0.5 MPa. G or NPT port threads are available. During installation, keep hands out of the gap between the mounting plate and cylinder body. The rotational moment applied to the guided mounting plate must not exceed the allowable value, as this may shorten the service life or damage the cylinder.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a single-rod, double-acting cylinder with mounting dimensions interchangeable with the CQS and CQ2 series, making it easy to retrofit or replace equipment. Its guide rod design limits rotational deviation to less than ±0.2°, making it suitable for compact applications requiring a degree of guidance accuracy. Operating pressure ranges from 0.12 MPa to 1.0 MPa. Ambient and fluid temperatures range from -10~+70℃ without magnetic switches and -10~+60℃ with magnetic switches (no freezing). Stroke lengths and magnetic switch configurations are available as options. Never use the cylinder as a stopper to absorb external impacts.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a compact, single-rod, double-acting cylinder with mounting dimensions interchangeable with the CQS and CQ2 series, making equipment replacement and upgrades easier. Its maximum operating pressure is 1.0 MPa and minimum operating pressure is 0.12 MPa. The operating temperature range is -10~+70℃ without a magnetic switch and -10~+60℃ with a magnetic switch (no freezing). Its guide rod design limits rotational deviation to within ±0.2°, making it suitable for pushing, clamping, positioning and other applications where space is limited. Select the bore size, stroke and standard or magnetic type as required. Do not use the cylinder as a stopper.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a single-rod, double-acting cylinder with a slim body and integrated guide rods. It is suitable for linear motion applications requiring rotation prevention and support for moderate lateral loads. The maximum operating pressure is 1.0 MPa, and the minimum operating pressure is 0.12 MPa. The ambient and fluid temperature range is -10~+70℃ without a magnetic switch and -10~+60℃ with a magnetic switch (no freezing). Its mounting dimensions are interchangeable with those of the CQS and CQ2 series. Non-rotation accuracy is within ±0.2°. Do not use it as a stopper. Applications include clamping, pushing, and positioning in automated equipment.

MGJ Series Miniature Guided Cylinder

MGJ Series Miniature Guided Cylinder

The MGJ series miniature guided cylinder features a double-acting design and is available in ø6 and ø10 bore sizes. It uses air as the working medium, with an operating pressure range of 0.15MPa to 0.7MPa and an ambient and fluid temperature range of -10℃~60℃ (no freezing). No lubrication is required, and the piston speed range is 50~500 mm/s. Integrated guide rods prevent rotation and provide high-precision guidance. The compact design is ideal for automated positioning, clamping, pushing and precision assembly of small workpieces.

MGP Series New Guided Cylinder

MGP Series New Guided Cylinder

The SNS MGP series new guided cylinder uses a dual guide rod design to withstand substantial lateral loads and deflection moments. It is suited to lifting, clamping, positioning, and transfer applications requiring high-precision guidance. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. Guide options include plain bearings and high-precision ball bearings, with piston rod non-rotation accuracy and stroke tolerances specified for each. The standard specifications table lists parameters by bore size, including operation type, operating fluid, maximum and minimum operating pressures, ambient and fluid temperatures, lubrication, and piston speed. Select a model based on the required bore and stroke combination.

MGG LB Series Guided Cylinder

MGG LB Series Guided Cylinder

The MGG LB series is a guided cylinder with two guide rods, an integrated hydraulic shock absorber, and a stroke adjustment mechanism for smooth cushioning and precise end-position adjustment. Its guide rod support structure provides strong resistance to lateral loads, making it suitable for applications involving off-center loads and side forces. Guide rod bearings are available in two types: sliding bearings for general guidance and ball bearings for high-precision, low-friction guidance. Bore sizes are 6、10、16、20、25、32、40、50、63、80、100mm, with common stroke lengths of 25、50、75、100mm and an operating pressure range of 0.15~0.7MPa (23~100psi). The cylinder has a modular construction comprising a body, mounting plate, guide rods, front cover, piston, piston rod, bumpers, and magnet. Magnetic switches can be added for position detection. Models are designated “MGG LB + bore diameter - stroke,” with port thread options including Rc3/8, NPT3/8, and G3/8.

MGG Series Compact Guided Cylinder

MGG Series Compact Guided Cylinder

The MGG Series Compact Guided Cylinder is designed for linear motion in confined spaces and provides guidance. An example model code is MGG M B 32 x 100 R, where 32 indicates the bore diameter (mm) and 100 indicates the stroke (mm). Other letters may denote different configuration options. Compact and easy to install, this series is commonly used for gripping, pushing, and similar tasks in automation equipment.