Model · TACQ Series Ultra-Compact Guided Cylinder

TACQ Series Ultra-Compact Guided Cylinder

The TACQ series is a double-acting, ultra-compact cylinder with two guide rods. Its flat body and short axial length save space, while the guide rods also prevent rotation. When retracted, the cylinder mounting plate's rotation is limited to ±0.2° (12 and 16 bores) or ±0.1° (20 bore and above). The cylinder can directly withstand certain off-center loads and lateral moments, making it suitable for clamping, lifting and pushing applications where space is limited and resistance to rotation and off-center loads is required. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm. The cylinder is double-acting and uses air filtered through a 40μm or larger filter. Its operating pressure range is 0.15~1.0 MPa (22~145 psi), proof pressure is 1.5 MPa (215 psi), and recommended operating pressure is 0.5 MPa. G or NPT port threads are available. During installation, keep hands out of the gap between the mounting plate and cylinder body. The rotational moment applied to the guided mounting plate must not exceed the allowable value, as this may shorten the service life or damage the cylinder.

Overview

The TACQ series is a double-acting, ultra-compact cylinder with two guide rods. Its flat body and short axial length save space, while the guide rods also prevent rotation. When retracted, the cylinder mounting plate's rotation is limited to ±0.2° (12 and 16 bores) or ±0.1° (20 bore and above). The cylinder can directly withstand certain off-center loads and lateral moments, making it suitable for clamping, lifting and pushing applications where space is limited and resistance to rotation and off-center loads is required. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm. The cylinder is double-acting and uses air filtered through a 40μm or larger filter. Its operating pressure range is 0.15~1.0 MPa (22~145 psi), proof pressure is 1.5 MPa (215 psi), and recommended operating pressure is 0.5 MPa. G or NPT port threads are available. During installation, keep hands out of the gap between the mounting plate and cylinder body. The rotational moment applied to the guided mounting plate must not exceed the allowable value, as this may shorten the service life or damage the cylinder.

Product category: Pneumatic Components / Guided Cylinders

Models & specifications

Model / NameAction typeBore (mm)Operating pressure (MPa)Proof pressure (MPa)Stroke (mm)
TACQ50X100S TACQ Series Ultra-Compact Guided Cylinder, Bore 50, Stroke 100, with Mounting Bracket复动型500.15~1.01.5100

Original catalogs

TACQ Series Ultra-Compact Guided Cylinder — Catalog page
TACQ Series Ultra-Compact Guided Cylinder — Catalog page