Pneumatic Gripper

MXF Series Ultra-Thin Pneumatic Slide Table (Crossed Roller Guide)

MXF Series Ultra-Thin Pneumatic Slide Table (Crossed Roller Guide)

Crossed roller guide.

MCHA Series Pneumatic Gripper

MCHA Series Pneumatic Gripper

MXH Series Compact Pneumatic Slide Table (Linear Guide)

MXH Series Compact Pneumatic Slide Table (Linear Guide)

MHY2 Series Air Gripper (Fulcrum Opening/Closing Type) / Cam-Type 180° Opening/Closing

MHY2 Series Air Gripper (Fulcrum Opening/Closing Type) / Cam-Type 180° Opening/Closing

MHS4 Series Pneumatic Grippers

MHS4 Series Pneumatic Grippers

The MHS4 series pneumatic gripper is a multi-jaw actuator with synchronized opening and closing. Compressed air drives a reciprocating piston, which moves the jaws along guide rails in unison to grip, position, sort and handle workpieces. It is commonly used in robot end-of-arm tooling, assembly lines, loading and unloading, and inspection stations. The body is typically made of anodized aluminum alloy, while the jaws and piston rod are stainless steel. A built-in magnetic ring allows magnetic sensors to detect the fully open and closed positions. The series is available in five bore sizes: Φ25, Φ32, Φ40, Φ50 and Φ63. Models are designated MHS4-Φ[bore diameter]D; larger bores provide greater gripping force. Mounting holes vary by bore size: Φ25 has 2-Φ3.4 through holes with Φ6.5 counterbores, 10 deep; Φ32 has 2-Φ4.5 through holes with Φ8 counterbores, 9 deep; Φ40 has 2-Φ5.5 through holes with Φ9.5 counterbores, 14 deep; and Φ50 and Φ63 both have 4-Φ5.1 through holes with Φ9.5 counterbores, 12 deep. Dowel pin holes on the bottom of the body enable precise positioning during repeated removal and reinstallation.

MXS Series Pneumatic Slide Table (Cross-Roller Guide)/Dual-Cylinder Type

MXS Series Pneumatic Slide Table (Cross-Roller Guide)/Dual-Cylinder Type

Cross-roller guide, dual-cylinder type.

MXP Series Compact Precision Pneumatic Slide

MXP Series Compact Precision Pneumatic Slide

CLU-F Series Pneumatic Parallel Grippers

CLU-F Series Pneumatic Parallel Grippers

The CLU-F series is a range of pneumatic parallel grippers designed for gripping, handling, assembly, and other applications in industrial automation. It is available in six sizes (CLU02-F to CLU25-F), covering a range of gripping forces and strokes. The compact design comes with detailed mounting dimensions, including overall length and width, mounting-hole spacing, and port size, making integration into automation systems straightforward. The gripper body is made of aluminum alloy and features a corrosion-resistant surface treatment, making it suitable for a variety of working environments. The table lists detailed dimensions for each model, including A (overall length), B (width), and φG (gripper diameter), helping users select a model to suit their space requirements. The series can be used with a standard retaining ring (STW-6). Port sizes range from G1/8 to G3/8 to accommodate different air supply pressures.

HFKL Series Pneumatic Grippers (Guided Parallel Type, Long-Stroke Roller Type)

HFKL Series Pneumatic Grippers (Guided Parallel Type, Long-Stroke Roller Type)

The HFKL Series pneumatic grippers are guided parallel-type, long-stroke roller models designed for picking and handling applications in automated equipment. The series offers several operating modes, including standard double-acting and single-acting normally open types. Precision guide rails and a roller mechanism ensure smooth operation over long strokes. These grippers are widely used in industrial robots, assembly lines, packaging machinery, and other applications.

HFZ Series Pneumatic Gripper (Guided Parallel Type – Ball Bearing)

HFZ Series Pneumatic Gripper (Guided Parallel Type – Ball Bearing)

The HFZ Series pneumatic gripper features a guided parallel design with ball-bearing guides, delivering high-precision, high-rigidity gripping. The series includes double-acting models (HFZ) and single-acting models (normally open/normally closed), with seven bore sizes: 6, 10, 16, 20, 25, 32, and 40 mm. At an operating pressure of 0.5 MPa, the closing gripping force per gripper ranges from 3.3 N to 255 N, while the opening gripping force ranges from 6.1 N to 320 N for double-acting models. Single-acting normally open models provide closing force only, from 1.9 N to 270 N; normally closed models provide opening force only, with the same range as the double-acting models. These products are suited to workpiece gripping, handling, assembly, and other industrial automation applications, and can replace comparable products from international brands.

HFZ Series Pneumatic Grippers

HFZ Series Pneumatic Grippers

HFZ Series guided parallel-type pneumatic grippers feature a ball-bearing guide design and support three operating modes: double-acting (HFZ), single-acting normally open (HFZ), and single-acting normally closed (HSZ). Bore sizes range from 6 to 40 mm, with a variety of gripping forces available for industrial applications such as automated assembly and material handling. Closing grip force: 3.3–270 N; opening grip force: 6.1–320 N.

HFK Series Guided Parallel Roller-Type Pneumatic Gripper

HFK Series Guided Parallel Roller-Type Pneumatic Gripper

The HFK Series Guided Parallel Roller-Type Pneumatic Gripper is an automation actuator designed for gripping workpieces. Its roller guide structure delivers high precision, rigidity, and a long service life. It is available in three operating configurations: double-acting (HFK) and single-acting (HFTK, HFSK). Bore sizes range from 10 to 40 mm to meet different gripping force requirements. It is suitable for industrial automation applications such as assembly, handling, and packaging.

Pneumatic Gripper (Guided Parallel Type – Roller Type), HFTK Series

Pneumatic Gripper (Guided Parallel Type – Roller Type), HFTK Series

The HFTK Series is a single-acting pneumatic gripper featuring a guided parallel roller mechanism. It is suitable for applications such as automated assembly and material handling. With bore sizes ranging from 10 to 40 mm, the series offers a variety of models. Its high precision and rigidity ensure stable gripping performance.

HFSK Series Pneumatic Gripper (Guided Parallel Type – Roller Type)

HFSK Series Pneumatic Gripper (Guided Parallel Type – Roller Type)

The HFSK Series is a single-acting pneumatic gripper featuring a guided parallel roller design. Bore sizes range from 10 to 40 mm (10, 16, 20, 25, 32, and 40 mm), with multiple options available. It is suitable for industrial applications such as automated assembly lines, gripping, and positioning, and provides stable gripping force and high reliability.

HFKP Series Pneumatic Gripper (Guided Parallel Type – Roller Type)

HFKP Series Pneumatic Gripper (Guided Parallel Type – Roller Type)

The HFKP Series is a guided parallel-type pneumatic gripper featuring a roller mechanism for high-precision, high-rigidity parallel opening and closing. Four bore sizes are available: 16 mm, 20 mm, 25 mm, and 32 mm. It is suitable for industrial applications such as automated gripping and assembly. Its compact design makes installation easy, and it offers excellent repeatability and a long service life. For detailed technical specifications, including stroke, gripping force, and repeatability, please refer to the product catalog.

HFKP Series Pneumatic Gripper (Dust-Proof, Guided Parallel Type, Roller-Driven)

HFKP Series Pneumatic Gripper (Dust-Proof, Guided Parallel Type, Roller-Driven)

The HFKP Series pneumatic gripper features a dust-proof, guided parallel design with roller drive. It is available in four sizes: HFKP16, HFKP20, HFKP25, and HFKP32. Designed for automated gripping applications, it provides dust protection and guidance. Mounting thread specifications vary by model.

HFP Series Pneumatic Grippers

HFP Series Pneumatic Grippers

The HFP Series features mechanically actuated, parallel-action pneumatic grippers, available in two versions: standard double-acting and single-acting, normally open. The body is made of aluminum alloy or stainless steel, and the fingers are stainless steel. Internal components include seals, magnets, and other parts. Bore sizes are available in multiple options, and finger types can be customized. Suitable for pick-and-place and material-handling applications on automated production lines.

HFY Series Y-Type Pneumatic Gripper

HFY Series Y-Type Pneumatic Gripper

The HFY series Y-type pneumatic gripper is available in two operating modes: double-acting (HFY) and single-acting, normally open (HFTY). It comes in two bore sizes, 6 mm and 10 mm. Gripping torque is proportional to air pressure P. Closing gripping torque is 7.4 × P and 17.6 × P for the 6 mm and 10 mm bores, respectively; opening gripping torque is 9.0 × P and 19.2 × P. It is suitable for tasks such as gripping and positioning workpieces in automated equipment.

HFC Series Parallel-Opening Pneumatic Gripper

HFC Series Parallel-Opening Pneumatic Gripper

The HFC Series parallel-opening pneumatic gripper features a double-acting design and uses air as its working medium (filtered through a filter of 40 μm or finer). It is available in seven sizes, with bore diameters ranging from 16 to 63 mm. Operating pressure varies by bore size: 0.2–0.7 MPa for a 16 mm bore and 0.15–0.7 MPa for 20–63 mm bores. Operating temperature: −20 to 70°C. Suitable for gripping and transferring workpieces in automated equipment.

HFR Series Pivot-Type Pneumatic Grippers

HFR Series Pivot-Type Pneumatic Grippers

The HFR series consists of pivot-type pneumatic grippers whose fingers open and close around a pivot point. They are suitable for gripping, holding, transferring, and positioning workpieces. Five bore sizes are available: 10, 16, 20, 25, and 32 mm. Two mounting options are offered: standard and through-hole mounting in the opening and closing direction (N), allowing flexibility based on available space and routing requirements. Compact in design, these grippers provide smooth, reliable operation and are widely used in automated assembly, sorting, and loading and unloading. The model code consists of the HFR series designation, bore size, and mounting type. For example, HFR-20 denotes a standard gripper with a 20 mm bore. Larger bores provide greater gripping force but also increase overall dimensions, so selection should take both workpiece weight and available mounting space into account.

HFCIYIX Series Pneumatic Grippers (Parallel Opening and Closing / Cylindrical Body)

HFCIYIX Series Pneumatic Grippers (Parallel Opening and Closing / Cylindrical Body)

The HFCIYIX series consists of parallel-opening pneumatic grippers with a cylindrical body. A double-acting cylinder drives the two jaws to open and close in parallel, keeping them aligned throughout their travel. Suitable for gripping square, round, and irregularly shaped workpieces, these grippers are widely used on automated production lines, as robotic end effectors, and at loading, unloading, and assembly stations. The cylindrical body facilitates recessed mounting and multidirectional piping, while jaw attachments can be added to accommodate different workpiece shapes. Selection criteria typically include bore size, opening and closing stroke, gripping force, repeatability, operating pressure range, maximum operating frequency, port size, and mounting dimensions. This page is only the catalog cover or title page for the series; detailed specifications, external dimensions, and model numbering rules are not provided.

HMF Series Wide-Body Air Gripper (Parallel Opening and Closing)

HMF Series Wide-Body Air Gripper (Parallel Opening and Closing)

The HMF series is a wide-body parallel air gripper. Its two fingers move synchronously toward or away from each other in a straight line, providing a wide gripping surface and rigid guidance. It is suitable for gripping wide workpieces or those requiring a longer gripping surface. For the same stroke, the wide body provides a larger mounting reference surface and greater resistance to off-center loads. Two-finger, three-finger and other multi-finger configurations are available, along with various jaw attachments, for automated assembly, handling and positioning. Key selection criteria include bore size (gripping force), opening and closing stroke, repeatability, operating pressure, actuation type (single-acting/double-acting), and accessories such as magnetic switches and jaw attachments. Note: The catalog table on this page is blank and does not provide specific models, dimensions or parameters. Refer to the complete catalog page for specifications.

HDW Series Pneumatic Gripper (Heavy-Duty Mechanical Gripper)

HDW Series Pneumatic Gripper (Heavy-Duty Mechanical Gripper)

The HDW series pneumatic gripper (heavy-duty mechanical gripper) is a slim pneumatic actuator used to grasp and hold workpieces in industrial automation. Its mechanical clamping design provides high gripping force, good rigidity, and high repeatability. The slim profile saves mounting space, making it suitable for confined spaces. This series is typically driven by a pneumatic cylinder and uses a mechanical linkage to open and close the jaws in parallel or with a swinging motion. It can be fitted with a variety of jaw attachments. When selecting a model, consider the gripping force, opening and closing stroke, and the weight and shape of the workpiece.

HFK Series Parallel Pneumatic Grippers with Guide Rails

HFK Series Parallel Pneumatic Grippers with Guide Rails

HFK series parallel pneumatic grippers feature roller guide rails for parallel gripping and transfer of workpieces in automated equipment. They offer high rigidity, high repeat positioning accuracy, and stable gripping force. The series is available in three action types: HFK standard double-acting roller type, HFSK single-acting normally closed roller type, and HFTK single-acting normally open roller type. Bore sizes are 10, 16, 20, 25, 32, and 40 mm. Available gripper configurations include standard, side-mount, through-hole mount, bottom-mount, narrow-jaw, side-mount with narrow jaws, and through-hole mount with narrow jaws, accommodating different installation spaces and jaw layouts. When selecting a model, specify the series code, bore size, and gripper configuration. Some mounting and jaw options are limited to certain bore sizes.

HFSK Series Guided Parallel Pneumatic Gripper (Single-Acting, Normally Closed, Roller Type)

HFSK Series Guided Parallel Pneumatic Gripper (Single-Acting, Normally Closed, Roller Type)

The HFSK series guided parallel pneumatic gripper (single-acting, normally closed, roller type) belongs to the HFK pneumatic gripper family. It uses a roller-type linear guide to provide parallel opening and closing of its two jaws, with high rigidity and repeat positioning accuracy. It is suitable for automated workpiece gripping, handling, positioning, and similar applications. The family comprises three types by operating mode: HFK (standard double-acting roller type), HFSK (single-acting, normally closed roller type), and HFTK (single-acting, normally open roller type). The single-acting, normally closed type uses spring force to remain clamped if the air supply is lost, providing a fail-safe holding function. Bore sizes are 10, 16, 20, 25, 32, and 40 mm. Available versions include standard (blank), through-hole mounting (N), bottom mounting (F), narrow jaw (R), side mounting with narrow jaws (W), and through-hole mounting with narrow jaws (M). W and M are available only for bore sizes 10~25 mm; the other versions are available across the full 10~40 mm bore range. Users can select side-mounting, through-hole mounting, bottom-mounting, narrow-jaw, or other versions to suit the available equipment space and workpiece shape.

HFTK Series Parallel Pneumatic Gripper with Guide Rail (Single-Acting, Normally Open, Roller Type)

HFTK Series Parallel Pneumatic Gripper with Guide Rail (Single-Acting, Normally Open, Roller Type)

The HFTK series is a single-acting, normally open roller-type parallel pneumatic gripper with a guide rail. Part of the HFK family, it shares the same model coding system and external design as the standard double-acting HFK and single-acting, normally closed HFSK. An integrated linear guide rail and roller guides provide parallel opening and closing of the two fingers, high rigidity, and accurate repeat positioning for gripping, positioning, and transferring small workpieces. Six bore sizes are available: 10, 16, 20, 25, 32, and 40 mm, selectable according to the required gripping force and workpiece size. Mounting and jaw options include standard (blank), side mounting, through-hole mounting N, bottom mounting F, narrow jaw width R, side mounting with narrow jaw width W, and through-hole mounting with narrow jaw width M, to suit different mounting spaces and gripper layouts. The single-acting, normally open design remains open when air pressure is lost, making it suitable for applications where the workpiece must be released during a power outage.

HDS/HRS Series Pneumatic Grippers (Y-Type Mechanical Grippers)

HDS/HRS Series Pneumatic Grippers (Y-Type Mechanical Grippers)

The HDS/HRS series pneumatic grippers (Y-type mechanical grippers) are available in two operating types: HDS driven type and HRS single-acting, normally open type. They are suitable for gripping, positioning and handling workpieces. Bore sizes are 10, 16, 20, 25 and 32 mm. Mounting fixture options: blank (no mounting fixture), HM (inner-ring mounting), HB (outer-ring mounting). Sensor options: blank (no sensor), 5G (CS-5G), 5GN (CS-5GN), with 1 or 2 sensors available. Order models are specified by combining the series code, bore size, mounting fixture, sensor type and quantity, for example HDS20-HM.

HFZ Series Pneumatic Grippers

HFZ Series Pneumatic Grippers

The HFZ series consists of parallel-opening pneumatic grippers available in three action types: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Seven bore sizes are available: Φ6, Φ10, Φ16, Φ20, Φ25, Φ32, and Φ40. Effective gripping force ranges from approximately 6.1~320 N, with closing strokes across both jaws of 4/4/6/10/14/22/30 mm, respectively. Gripping force and stroke increase with bore size. Three body mounting styles are available: standard (Φ6, Φ10~Φ40), F side-mount (Φ6, Φ10, Φ16~Φ40), and N through-hole mount (Φ6, Φ10, Φ16~Φ40), allowing side or through-hole installation in confined spaces. Model numbers consist of an action-type prefix (HFZ / HFSZ) followed by the bore size, with suffix F indicating side mounting and N indicating through-hole mounting. The grippers are suitable for gripping, positioning, and transferring small workpieces on automated production lines in electronics, semiconductors, packaging, automotive components, and other industries.

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ series pneumatic grippers are used to grip and hold workpieces in automated equipment. They are available in three configurations: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Bore sizes are 6, 10, 16, 20, 25, 32, and 40 mm. Mounting options include standard, side mounting (F type), and through-hole mounting (N type). The catalog lists parameters such as effective support force, closing stroke, and weight for each bore size. These grippers are suitable for tooling, handling, and positioning applications requiring compact two-finger gripping. Models include HFZ10, HFZ16, HFZ20, HFZ25, HFZ32, and HFZ40. Select a model based on bore size, operating configuration, mounting method, and required gripping force.

HFK Series Parallel Air Grippers

HFK Series Parallel Air Grippers

The HFK series consists of parallel air grippers with roller guides. Two fingers open and close in parallel along the guides, allowing workpieces to be gripped externally or held internally. The roller guides offer low friction, high rigidity and high repeatability, making them suitable for automated loading, unloading and assembly of electronics, semiconductors and automotive components. Three operating types are available: HFK is the standard double-acting type, with compressed air driving both opening and closing; HFTK is a single-acting, normally open type, whose fingers open when air supply is lost; and HFSK is a single-acting, normally closed type, whose fingers remain closed and gripping when air supply is lost, providing greater safety. The catalog uses symbols such as A, AB, B, C, CA, D, DA, DB, E and EA to identify external dimensions, making it easier to match the gripper to mounting surfaces, finger attachments and magnetic switch grooves. Selection also requires confirmation of parameters such as bore size, opening and closing stroke, gripping force, operating pressure and operating frequency.

HDM Series Pneumatic Grippers

HDM Series Pneumatic Grippers

The HDM series consists of double-acting pneumatic grippers with aluminum alloy bodies and alloy steel jaws and main shafts, designed for gripping and positioning workpieces in automated equipment. The catalog lists bore diameters of 12, 16, 20 and 25 mm, among others, with minimum operating pressures of approximately 0.1~0.22 MPa. Threaded holes on the grippers include 4-M3×0.5, 4-M4×0.7 and 4-M5×0.8, and effective gripping force increases with bore diameter. Mounting options include threaded holes on the bottom or side of the body, as well as HM-type or HB-type mounting fixtures at the bottom. Major components, including the body, rear cover and piston, are made of aluminum alloy, while the jaws, actuating lever and shaft-end coupling block are made of alloy steel. Replacement seals are available, including piston seals, shaft seals and rear cover O-rings. The weight table covers HDM-12S through HDM-32S, with weights of approximately 0.1~1.23 kg.

HFR Series 180° Opening and Closing Pneumatic Gripper

HFR Series 180° Opening and Closing Pneumatic Gripper

The HFR series is a 180° opening and closing pneumatic gripper (angular gripper). Dual pistons and a rack-and-pinion or linkage mechanism convert the pistons' linear motion into a 180° opening and closing motion of two fingers around a pivot, enabling workpieces to be gripped, flipped, positioned and held between two points. The series code is HFR, with five bore sizes: 10, 16, 20, 25 and 32. A blank mounting-style field indicates the standard type. Larger bores provide greater effective holding force. When selecting a model, the required holding force should be calculated at 10~20 times the workpiece weight, with an additional safety margin for acceleration or impact. For example, with a 0.05kg workpiece, pivot distance L=30mm and operating pressure of 5kgf/cm², the required effective holding force is approximately 10N or more; the HFR16 (effective holding force 17N) can be selected. The main body components are made of aluminum alloy, alloy steel and stainless steel, with NBR seals and accessories including a C-shaped retaining ring (spring steel). The gripper is suitable for automated assembly, handling and inspection stations.

HFY Series Pneumatic Gripper (Y-Type)

HFY Series Pneumatic Gripper (Y-Type)

The SNS HFY Series pneumatic gripper (Y-type) is powered by compressed air and features a Y-type jaw design for gripping, handling, and positioning workpieces in automated equipment. It is available in five bore sizes: 6, 10, 16, 25, and 32 mm, with three mounting options: rear mounting, front threaded-hole mounting, and side mounting. The corresponding fastening bolts are M3×0.5, M4×0.7, M5×0.8, M6×1.0, and M6×1.0, respectively. Maximum tightening torque ranges from 0.89~2.5 N·m, and maximum bolt insertion depth ranges from 5~15 mm. A drop-prevention device must be installed during use, and excessive external force and impact must be avoided. The workpiece must be positioned on the centerline between the two jaws and inserted coaxially. Use a speed control valve to adjust the jaw opening and closing speeds. When installing jaw attachments, hold the jaw with an open-end wrench before tightening the screws with a hex key.

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

The HFP series pneumatic gripper (mechanical parallel type) is a double-acting parallel gripper powered by compressed air and requires no lubrication. It has an operating pressure range of 0.1~0.7MPa, an ambient temperature range of -10~+60℃, and repeatability of ±0.05mm. Five bore sizes are available: 10, 16, 20, 25, and 32, each with a choice of long, medium, or short opening and closing strokes. Compared with the MH22 series, its height is reduced by approximately 1/3, its moment is lower, and its rigidity is increased. The finished product ordering code is HFP+bore size+option (e.g., HFP20□). Dimensions for the single-acting type are shown in parentheses. It is suitable for automated handling, gripping, and similar applications.

HFT Series Wide-Opening Grippers

HFT Series Wide-Opening Grippers

The HFT series wide-opening gripper is a pneumatically driven parallel gripper. A cylinder drives the jaws to grip workpieces over a wide opening and long stroke, making it suitable for picking up and positioning larger workpieces. Five bore sizes are available: 10, 16, 20, 25 and 32. The number after × in the model designation indicates the gripping stroke, ranging from 20~250mm, with configurations from HFT10×20 to HFT32×250. During operation, ensure that the gripping point distance R is within the effective gripping force curve for the corresponding air pressure, and allow a gripping force margin based on the workpiece weight. Jaw attachments should be as light and short as possible to prevent excessive opening and closing inertia from reducing service life. Select locking screws from M4×0.7, M5×0.8, M6×1.0 and M8×1.25 according to the model. Tighten them to the specified maximum tightening torque, install jaw attachments with the piston rod retracted, and fit a drop-prevention device to prevent injury from falling workpieces.

MHS Series Parallel Pneumatic Grippers

MHS Series Parallel Pneumatic Grippers

The MHS series of parallel-opening pneumatic grippers includes the MHS3 three-finger and MHS4 four-finger configurations, with bore sizes of 16, 20, 25, 32, 40, 50 and 63mm. A parallel opening and closing mechanism synchronizes the fingers, providing stable gripping force and high repeat positioning accuracy. These grippers are suitable for automated workpiece handling, transfer, positioning and assembly. The operating pressure is 0.2~0.6MPa for the 16mm bore and 0.1~0.6MPa for bore sizes of 20mm and above. Models are designated as “MHS3/MHS4-bore size D”, allowing selection by finger count and bore size. Magnetic switches can also be fitted to detect open and closed positions.

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.

HFY Series Y-Type Pneumatic Grippers

HFY Series Y-Type Pneumatic Grippers

The HFY series consists of Y-type (angular opening and closing) pneumatic grippers, a type of pneumatic actuator used to pick, grip, position, and transfer small workpieces on automated production lines. The series is available in two configurations: standard double-acting and single-acting, normally open. Double-acting models open and close the fingers by alternately supplying air to the two ports, while single-acting, normally open models use a return spring to remain open when air pressure is lost, making them suitable for applications with safety requirements. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Larger bores provide greater gripping force and opening stroke, allowing selection based on workpiece size and required gripping force. Models use a simple “HFY-bore” designation, such as HFY-10. Optional finger and gripper body configurations, such as side threaded-hole mounting, through-hole mounting in the opening and closing direction, and flat fingers, can be selected as needed with reference to options for grippers in the same series. Compact and lightweight, the grippers offer flexible mounting options and can be paired with magnetic switches to detect fully open and closed positions. They are widely used in automated equipment for consumer electronics assembly, packaging, lithium battery production, and automotive components.

HDW Series Heavy-Duty Mechanical Gripper

HDW Series Heavy-Duty Mechanical Gripper

The HDW series heavy-duty mechanical gripper is a pneumatic actuator designed for automated gripping and holding. It offers high gripping force and structural rigidity, making it suitable for workpiece handling, positioning, and clamping. The series is specified primarily by bore size, with eight options: Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ80, and Φ100 mm. The base model is coded as HDW-[bore size]. Sensors can be added to detect gripper jaw status. Available sensor models are CS-8G, CS-8GN, CS-8GP, CS-9D, CS-9B, and CS-9H, with a choice of 1 or 2 sensors as needed. Leave this option blank if no sensor is required. When selecting a model, first determine the bore size based on gripping force, workpiece dimensions, and installation space, then select the sensor and quantity according to detection requirements.

MHS Series Air Gripper (Parallel Opening/Closing Type) / Cylindrical Jaw Body

MHS Series Air Gripper (Parallel Opening/Closing Type) / Cylindrical Jaw Body

The MHS series features parallel-opening and -closing air grippers with a compact cylindrical jaw-body design, suitable for pick-and-place operations on automated production lines. Models include the MHS2, MHS3, and MHS4, among others. Position can be detected using magnetic switches. A sample model code is MHS2-16D1Y59A: 16 indicates the bore diameter, D indicates the type, 1 indicates the stroke, and Y59A indicates the switch model. Refer to the product catalog for detailed specifications.

HFC1 Series Pneumatic Gripper

HFC1 Series Pneumatic Gripper

The HFC1 series pneumatic gripper (parallel pneumatic gripper) features a dual-piston design with good resistance to bending and torsion, allowing it to withstand substantial dynamic and lateral loads. Bore sizes are 10, 16, 20, 25, 32, 40, 50, and 63 mm. The working medium is air, with an operating pressure range of 1.0~9.0 kgf/cm², a proof pressure of 13.5 kgf/cm², an operating temperature of -20~70℃, a speed range of 30~500 mm/s, a stroke tolerance of -1.0 mm, a non-rotation angle of ±0.1°, and a port size of M5×0.8. Rear mounting and front through-hole mounting are supported. Impact pads or hydraulic shock absorbers at both ends reduce impact speed and extend service life. With high-temperature seals, the gripper can operate at 150℃. During installation, select bolts appropriate for the bore size and keep the tightening torque within the specified range: excessive torque can cause malfunction, while insufficient torque can cause misalignment and detachment.

HMHC2 Series Pivoting Pneumatic Gripper

HMHC2 Series Pivoting Pneumatic Gripper

The HMHC2 series pivoting pneumatic gripper uses a double-acting or single-acting cylinder to rotate two fingers around a pivot, enabling workpieces to be gripped, held, and released. Bore sizes are 10, 16, and 20 mm. Action types include double-acting D and single-acting (normally open) S. Finger options include the standard type (blank) and the through-hole mounting type in the opening/closing direction (2). Compact in design and providing stable gripping force, the gripper can be fitted with magnetic switches to detect open and closed positions. It is widely used in automated assembly, handling, inspection, and other applications.

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

The HMHY2 series is a cam-operated 180° pivoting air gripper designed for gripping, turning, and opening and closing workpieces in automated equipment. Bore sizes are 10, 16, and 20 mm, with a choice of D double-acting or S single-acting (normally open) operation. Finger mounting options include standard (blank) or through-hole mounting in the opening/closing direction (2). The M9BW magnetic switch is available. The compact design and wide opening angle enable 180° pivoting grip at fixture, assembly, and handling stations.

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

The HMHZJ2 series consists of parallel pneumatic grippers with dust covers and a two-jaw parallel opening and closing mechanism. They are suitable for harsh conditions involving dust and cutting fluid splashes. Bore sizes are 6, 10, and 16 mm, with double-acting (D), single-acting normally open (S), and single-acting normally closed (C) options. Dust covers are available in butadiene rubber (CR, labeled as argon butadiene rubber in the original), fluoroelastomer (FKM), and silicone rubber (Si), to suit oil resistance, chemical resistance, or temperature requirements. Magnetic switches such as the A93 can be fitted to detect open and closed positions. The series is commonly used for automated assembly, gripping, and handling.

HMMHZ2 Series Parallel Pneumatic Gripper

HMMHZ2 Series Parallel Pneumatic Gripper

The HMMHZ2 series parallel pneumatic gripper features two fingers that open and close in sync for centered, parallel gripping and handling of workpieces. Four action types are available: D double-acting, S single-acting (normally open), C single-acting (normally closed), and N blank. Finger options include 1 side threaded-hole mounting, 2 through-hole mounting in the opening and closing direction, 3 flat fingers, and 4 no fingers (blank type). These options can be combined to suit the application. The body has mounting positions for optional magnetic switches to detect fully open and closed positions. It is widely used in automated assembly, loading and unloading, sorting, and other applications.

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

The HMS3 series consists of parallel-opening pneumatic grippers with a cylindrical body. A dual-piston or wedge-cam mechanism converts the cylinder's linear thrust into parallel opening and closing motion of the two jaws. The jaws remain parallel throughout their travel, reducing workpiece displacement during gripping and making them suitable for regularly shaped workpieces such as square and cylindrical parts. These grippers are commonly used in automated assembly, handling, loading and unloading, and inspection and positioning. Magnetic switches can be added to detect the fully open and closed positions. The catalog also lists the HMS4 series of parallel-opening grippers with cylindrical bodies on the same page. This related series has the same construction but different body sizes; select between them based on the required gripping force, opening and closing stroke, and body size. Specifications are primarily distinguished by model code. Confirm the bore, gripping force, opening and closing stroke, repeatability, port threads, and other parameters in the relevant specification table.

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

The HMS4 series is a parallel-opening pneumatic gripper with a cylindrical body. Its two jaws open and close in parallel along guide rails to pick and place workpieces on automated production lines, either by gripping their outer surfaces or expanding against their inner surfaces. The jaws remain parallel throughout their travel, providing a large contact area and high centering accuracy. This makes the gripper particularly suitable for regularly shaped workpieces, such as square and cylindrical parts. It can be mounted directly on a robot end flange or fixture. The compact cylindrical body is convenient for confined spaces or installations with multiple grippers arranged side by side. The gripper is typically driven by a double-acting cylinder, with gripping force controlled by adjusting the air supply pressure. Magnetic switches can be added to detect fully open and closed positions, and jaws can be selected to suit the workpiece material and shape. This page provides only the series name and configuration (parallel opening and closing / cylindrical body). Refer to the full catalog page for bore sizes, strokes, gripping forces, repeatability, port threads, and model code combination rules.

HS-225 Series Pneumatic Grippers

HS-225 Series Pneumatic Grippers

The HS-225 series comprises two pneumatic parallel grippers: the HS-225-DHB and HS-225-DSM. The HS-225-DHB weighs 286 g, has a holding capacity of 227 kg, and uses the HS-FC-56212 spindle. Its gripper opens to 90°, and its handle opens to 65°. The HS-225-DSM weighs 315 g; its holding capacity is not specified. It also uses the HS-FC-56212 spindle. This series is suitable for automated applications involving gripping and securing workpieces.