Pivoting Type

HFR Series Pivot-Type Pneumatic Grippers

HFR Series Pivot-Type Pneumatic Grippers

The HFR series consists of pivot-type pneumatic grippers whose fingers open and close around a pivot point. They are suitable for gripping, holding, transferring, and positioning workpieces. Five bore sizes are available: 10, 16, 20, 25, and 32 mm. Two mounting options are offered: standard and through-hole mounting in the opening and closing direction (N), allowing flexibility based on available space and routing requirements. Compact in design, these grippers provide smooth, reliable operation and are widely used in automated assembly, sorting, and loading and unloading. The model code consists of the HFR series designation, bore size, and mounting type. For example, HFR-20 denotes a standard gripper with a 20 mm bore. Larger bores provide greater gripping force but also increase overall dimensions, so selection should take both workpiece weight and available mounting space into account.

HFR Series 180° Opening and Closing Pneumatic Gripper

HFR Series 180° Opening and Closing Pneumatic Gripper

The HFR series is a 180° opening and closing pneumatic gripper (angular gripper). Dual pistons and a rack-and-pinion or linkage mechanism convert the pistons' linear motion into a 180° opening and closing motion of two fingers around a pivot, enabling workpieces to be gripped, flipped, positioned and held between two points. The series code is HFR, with five bore sizes: 10, 16, 20, 25 and 32. A blank mounting-style field indicates the standard type. Larger bores provide greater effective holding force. When selecting a model, the required holding force should be calculated at 10~20 times the workpiece weight, with an additional safety margin for acceleration or impact. For example, with a 0.05kg workpiece, pivot distance L=30mm and operating pressure of 5kgf/cm², the required effective holding force is approximately 10N or more; the HFR16 (effective holding force 17N) can be selected. The main body components are made of aluminum alloy, alloy steel and stainless steel, with NBR seals and accessories including a C-shaped retaining ring (spring steel). The gripper is suitable for automated assembly, handling and inspection stations.

HMHC2 Series Pivoting Pneumatic Gripper

HMHC2 Series Pivoting Pneumatic Gripper

The HMHC2 series pivoting pneumatic gripper uses a double-acting or single-acting cylinder to rotate two fingers around a pivot, enabling workpieces to be gripped, held, and released. Bore sizes are 10, 16, and 20 mm. Action types include double-acting D and single-acting (normally open) S. Finger options include the standard type (blank) and the through-hole mounting type in the opening/closing direction (2). Compact in design and providing stable gripping force, the gripper can be fitted with magnetic switches to detect open and closed positions. It is widely used in automated assembly, handling, inspection, and other applications.

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

The HMHY2 series is a cam-operated 180° pivoting air gripper designed for gripping, turning, and opening and closing workpieces in automated equipment. Bore sizes are 10, 16, and 20 mm, with a choice of D double-acting or S single-acting (normally open) operation. Finger mounting options include standard (blank) or through-hole mounting in the opening/closing direction (2). The M9BW magnetic switch is available. The compact design and wide opening angle enable 180° pivoting grip at fixture, assembly, and handling stations.

MHC2 Series Pneumatic Grippers

MHC2 Series Pneumatic Grippers

The MHC2 series consists of angular pneumatic grippers with two fingers that pivot open and closed around a fulcrum. They are suitable for gripping, turning and holding workpieces in position. Four bore sizes are available: 10, 16, 20 and 25mm. The grippers are available in double-acting (D) and single-acting (S) versions. Double-acting models open and close by alternately supplying air to ports on either side, while single-acting models use spring return. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.1~0.6MPa, the ambient temperature range is -10~60℃ (no freezing), and the maximum operating frequency is 180c.p.m. Opening and closing angle repeatability is ±0.01. Lubrication is not required; if lubrication is desired, ISO VG32 turbine oil No. 1 may be used. Effective gripping torque at 0.5MPa ranges from 0.10~1.36N·m, with corresponding opening and closing angles of 39°~316°; larger bores provide greater gripping torque and angles. Optional 3-wire or 2-wire solid-state magnetic switches, such as D-M9BL, can detect the open and closed positions. Mounting can be accomplished using either threaded holes or through-holes, but not both at the same time.

MHT2 Series Toggle-Type Pneumatic Grippers

MHT2 Series Toggle-Type Pneumatic Grippers

The MHT2 series consists of toggle-type (pivoting) pneumatic grippers driven by a double-acting cylinder. Their force-multiplying toggle linkage provides high gripping force for handling heavy workpieces. The self-locking toggle mechanism maintains the grip even if air pressure is suddenly lost or the air supply is cut off, preventing the workpiece from falling. A built-in magnetic ring allows magnetic switches to be mounted directly to detect the open and closed positions of the fingers. Four bore sizes are available: φ32/φ40/φ50/φ63. The operating pressure range is 0.1~0.6MPa, and the ambient and fluid temperature range is 5~60℃. Lubrication is not required; if lubrication is used, use turbine oil No. 1 ISO VG32. The finger opening angle is -3°~28°, holding force at 0.5MPa is 12.4~106 N·m, and weight is 0.80~2.08kg. The model number combines the base model, including bore size, with the number and model of magnetic switches.

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

The MHT2 series consists of angular pneumatic grippers that use a toggle mechanism to grip workpieces. They are suitable for picking, gripping, and transferring workpieces in automated equipment. The catalog lists two models, MHT2-50D and MHT2-63D, with the suffix D identifying the basic version of the series. These grippers are often used with accessories such as magnetic switches to detect gripping status. Refer to the full catalog for specific gripping force, stroke, operating pressure, and port size specifications.